一步法制备纳米铂/石墨烯及电催化甲醇的交流阻抗和扩散系数测定

采用绿色还原剂抗坏血酸,一步法制备纳米铂/石墨烯。对其进行X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)形貌结构表征,铂纳米粒子均匀分散于纳米石墨烯片层褶皱间,有效减少了团聚现象。运用循环伏安法(CV)和计时电流法(CA)研究纳米铂/石墨烯对甲醇电催化氧化活性和稳定性,通过交流阻抗(EIS)定量测定,发现铂/石墨烯比铂具有更优异的电荷传输性能,电荷转移阻抗下降了34.8%。计时电量法(CC)测定得到甲醇在铂/石墨烯电极的表面扩散系数为1.42×10~(-9) cm~2·s~(-1)。与铂纳米粒子相比,纳米铂/石墨烯对甲醇电催化氧化具有更高的活性和稳定性,显著提高电极催化活性表面积和电荷传输及转移性能。     

3D石墨烯/镍铝层状双金属氢氧化物的制备及超级电容性能

超声分散氧化石墨和聚苯乙烯微球于去离子水形成稳定分散液, 加入氨水和水合肼还原氧化石墨得到包覆石墨烯纳米片的聚苯乙烯微球, 经6 mol·L^-1 KOH碱蚀和甲苯洗脱聚苯乙烯制备3D石墨烯. 将3D石墨烯超声分散于去离子水, 然后分别以硝酸镍、硝酸铝和尿素为镍源、铝源和碱源化合物水热合成3D石墨烯/镍铝层状双金属氢氧化物复合材料. 采用红外、拉曼、X射线衍射、扫描电镜、透射电镜和恒电流充-放电测试对材料的结构、形貌及电化学性质进行研究. 结果表明, 氧化石墨被还原形成有微孔结构的3D石墨烯. 镍铝双金属氢氧化物纳米片均匀分散在3D石墨烯孔壁. 在1 A·g^-1的电流密度下, 复合材料电极的比电容为1054.8 F·g^-1. 当电流密度增加到8 A·g^-1时, 比电容为628.1 F·g^-1. 循环充-放电1000次后, 比电容仍保持在97%以上, 呈示该复合材料具有优异的电化学性能.     

Pd/石墨烯复合材料的制备及电催化甲酸和甲醇性能研究

通过电解高纯石墨棒的方法制备氧化石墨,将氧化石墨在超纯水中超声,形成稳定的氧化石墨烯分散液。以氧化石墨烯分散液和氯化钯作为前驱体,采用一步电沉积法制备Pd/石墨烯纳米复合材料。用扫描电子显微镜(SEM)、X射线衍射仪(XRD)及紫外可见分光光度计(UV-vis)对物质的表面形貌及物相组成进行表征分析。用循环伏安法(CV)和计时电流法(CA)研究了Pd/石墨烯催化剂对甲酸和甲醇的电催化氧化活性。结果表明:与纳米钯修饰电极相比,Pd/石墨烯修饰电极对甲酸及甲醇的电催化氧化活性有了极大的提高。     

氧化石墨烯/金银纳米粒子复合材料的制备及其SERS效应研究

近年来,氧化石墨烯/金银纳米粒子复合材料由于其优异的表面增强拉曼散射（SERS）性能引起了人们极大的关注,在污染物检测、化学传感和癌症诊断等领域具有重要的应用价值。本文综述了氧化石墨烯片层上修饰金银纳米粒子、氧化石墨烯包覆金银纳米粒子、氧化石墨烯附着在金银纳米粒子层三种氧化石墨烯/金银纳米粒子复合材料的制备方法,对其SERS效应进行了详细介绍。SERS研究表明,结合了金银纳米粒子与氧化石墨烯两种材料各自在SERS研究与应用中的优势,氧化石墨烯/金银纳米粒子复合材料的SERS性能比单纯金银纳米粒子更加优异。氧化石墨烯在其中起到了化学增强、分子富集、钝化保护、荧光猝灭的重要作用。氧化石墨烯/金银纳米粒子复合材料在表面增强拉曼光谱中具有广阔的应用前景。     

壳聚糖/氧化石墨烯纳米复合材料的形态和力学性能研究

通过溶液共混法成功制备了氧化石墨烯/壳聚糖纳米复合材料. 透射电镜(TEM)结果表明, 氧化石墨烯纳米粒子在壳聚糖基体中分散良好. 拉伸实验结果表明, 随氧化石墨烯含量的增加, 氧化石墨烯/壳聚糖纳米复合材料的杨氏模量和拉伸强度均显著改善, 加入4 wt%的氧化石墨烯能够使纳米复合材料的杨氏模量和拉伸强度分别提高123%和117%|但另一方面, 却也在一定程度上使复合材料的断裂伸长率或韧性下降.     

石墨烯对Ni（OH）2超级电容器材料电化学行为的影响

研究了氧化缺陷石墨烯对Ni(OH)2电化学性能的增强作用.实验上,由恒电位沉积法在石墨烯基底上制备Ni(OH)2纳米粒子/石墨烯复合材料.TEM观察和电化学测试表明,Ni(OH)2纳米粒子均匀地分散在石墨烯基底上,其粒径为5.0±0.5 nm,体系的质量比电容值为1928 F.g-1.量化计算表明,上述复合材料乃是通过Ni(OH)2与石墨烯表面功能基团的强化学作用相结合而导电的,电子则是自石墨烯基底经氧化缺陷向Ni(OH)2传递,导致Ni(OH)2带负电,从而形成Ni(OH)2纳米粒子的单向导电行为.     

石墨烯/二氯化镁负载钛系齐格勒-纳塔催化剂制备及其乙烯聚合性能

石墨烯自2004年发现以来,由于其独一无二的优异性迅速成为科学家们的研究热点.由于石墨烯具有极其优异的电学、力学和热学等性能,因此被广泛应用于高性能聚合物基复合材料的制备.众所周知,纳米填料在聚合物中的分散状态以及与基体间的界面作用是构筑高性能聚合物纳米复合材料的关键因素.由于石墨烯极易团聚,难以通过传统的熔融共混法制备均匀分散的石墨烯增强-聚烯烃纳米复合材料.另一方面,聚烯烃通常需要在较高温度下才能溶于部分有毒溶剂(如:三氯苯和二甲苯等),因此溶液共混法也不适用于聚烯烃-石墨烯纳米复合材料的制备.有鉴于此,本文开发了一种共沉积法制备石墨烯/二氯化镁负载钛系齐格勒-纳塔催化剂的路线.通过原位聚合直接制备出石墨烯均匀分散的聚烯烃/石墨烯纳米复合材料.考察了石墨烯的加入量对催化剂形态及其催化乙烯聚合行为的影响.当石墨烯加入量较低时,多个石墨烯片被包裹于较大的催化剂粒子中.随着石墨烯加入量的增加,催化剂趋向于在石墨烯表面聚集.继续增加石墨烯量将导致石墨烯包裹催化剂粒子,降低过渡金属钛的负载效率.通过三乙基铝活化后,所制备的催化剂具有非常高的乙烯催化活性,所生成的聚乙烯/石墨烯纳米复合材料复制了催化剂的片状结构.同时,通过对所制备的聚乙烯/石墨烯纳米复合材料进行电子显微镜和X射线衍射分析可知,石墨烯均匀分散于聚乙烯基体中,并且没有任何团聚现象发生.该复合材料的热重分析表明,仅加入非常少量的石墨烯就可以使其具有比纯聚乙烯更高的热稳定性,当石墨烯加入量为0.66 wt%时,其5 wt%热分解温度较纯聚乙烯升高了54°C.同时,所制备聚乙烯/石墨烯纳米复合材料具有更优异的机械性能.因此,本研究提供了一个简单高效的高性能聚烯烃/石墨烯纳米复合材料的制备方法.     

石墨烯和铂/石墨烯的合成及其表征

以天然鳞状石墨为原料,采用化学氧化法合成氧化石墨,在此基础上采用低温热解膨胀结合微波加热乙二醇还原法合成石墨烯(Gr)以及铂/石墨烯(Pt/Gr)复合材料。SEM和TEM显示所制备的石墨烯为层状结构的半透明薄膜。采用X射线光电子能谱(XPS)和傅立叶转换红外光谱(FTIR)分别确定氧化石墨、膨胀石墨及石墨烯表面含氧官能团的数量和性质。以所制备的碳氧原子比5.94的石墨烯作为载体制备出可用于质子交换膜燃料电池的高负载量的Pt/Gr催化剂,在铂载量高达60%时,表面铂粒子依然具有高分散性,平均粒径为3.8 nm。     

石墨烯/二氯化镁负载钛系齐格勒-纳塔催化剂制备及其乙烯聚合性能（英文）

石墨烯自2004年发现以来,由于其独一无二的优异性迅速成为科学家们的研究热点.由于石墨烯具有极其优异的电学、力学和热学等性能,因此被广泛应用于高性能聚合物基复合材料的制备.众所周知,纳米填料在聚合物中的分散状态以及与基体间的界面作用是构筑高性能聚合物纳米复合材料的关键因素.由于石墨烯极易团聚,难以通过传统的熔融共混法制备均匀分散的石墨烯增强-聚烯烃纳米复合材料.另一方面,聚烯烃通常需要在较高温度下才能溶于部分有毒溶剂(如:三氯苯和二甲苯等),因此溶液共混法也不适用于聚烯烃-石墨烯纳米复合材料的制备.有鉴于此,本文开发了一种共沉积法制备石墨烯/二氯化镁负载钛系齐格勒-纳塔催化剂的路线.通过原位聚合直接制备出石墨烯均匀分散的聚烯烃/石墨烯纳米复合材料.考察了石墨烯的加入量对催化剂形态及其催化乙烯聚合行为的影响.当石墨烯加入量较低时,多个石墨烯片被包裹于较大的催化剂粒子中.随着石墨烯加入量的增加,催化剂趋向于在石墨烯表面聚集.继续增加石墨烯量将导致石墨烯包裹催化剂粒子,降低过渡金属钛的负载效率.通过三乙基铝活化后,所制备的催化剂具有非常高的乙烯催化活性,所生成的聚乙烯/石墨烯纳米复合材料复制了催化剂的片状结构.同时,通过对所制备的聚乙烯/石墨烯纳米复合材料进行电子显微镜和X射线衍射分析可知,石墨烯均匀分散于聚乙烯基体中,并且没有任何团聚现象发生.该复合材料的热重分析表明,仅加入非常少量的石墨烯就可以使其具有比纯聚乙烯更高的热稳定性,当石墨烯加入量为0.66 wt%时,其5 wt%热分解温度较纯聚乙烯升高了54℃.同时,所制备聚乙烯/石墨烯纳米复合材料具有更优异的机械性能.因此,本研究提供了一个简单高效的高性能聚烯烃/石墨烯纳米复合材料的制备方法.     

石墨烯/尖晶石LiMn2O4纳米复合材料制备及电化学性能

采用溶胶凝胶法和还原氧化石墨法制备尖晶石LiMn2O4纳米晶和石墨烯纳米片,并采用冷冻干燥法制备了石墨烯/尖晶石LiMn2O4纳米复合材料,利用XRD、SEM、AFM等对其结构及表面形貌进行表征;利用CV、充放电、EIS研究纳米复合材料的电化学性能和电极过程动力学特征。结果表明:纳米LiMn2O4电极材料及其石墨烯掺杂纳米复合材料的放电比容量分别为107.16 mAh.g-1,124.30 mAh.g-1,循环100周后,对应容量保持率为74.31%和96.66%,石墨烯可显著改善尖晶石LiMn2O4电极材料的电化学性能,归结于其良好的导电性。纳米复合材料EIS上感抗的产生与半导体尖晶石LiMn2O4不均匀地分布在石墨烯膜表面所造成局域浓差有关,并提出了感抗产生的模型。     

One-step synthesis of Pt nanoparticles/reduced graphene oxide composite with enhanced electrochemical catalytic activity

A one-step electrochemical approach for synthesis of Pt nanoparticles/reduced graphene oxide(Pt/RGO) was demonstrated.Graphene oxide(GO) and chloroplatinic acid were reduced to RGO and Pt nanoparticles(Pt NPs) simultaneously,and Pt/RGO composite was deposited on the fluorine doped SnO 2 glass during the electrochemical reduction.The Pt/RGO composite was characterized by field emission-scanning electron microscopy,Raman spectroscopy and X-ray photoelectron spectroscopy,which confirmed the reduction of GO and chloroplatinic acid and the formation of Pt/RGO composite.In comparison with Pt NPs and RGO electrodes obtained by the same method,results of cyclic voltammetry and electrochemical impedance spectroscopy measurements showed that the composite electrode had higher catalytic activity and charge transfer rate.In addition,the composite electrode had proved to have better performance in DSSCs than the Pt NPs electrode,which showed the potential application in energy conversion.     

Synthesis and electrochemical performance of sandwich-like polyaniline/graphene composite nanosheets

Sandwich-like polyaniline/graphene composite nanosheets have been synthesized by chemical oxidation polymerization of aniline monomer on the surfaces of reduced graphene oxide nanosheets in the absence of any surfactants. The influences of the mass ratios of aniline and reduced graphene oxide on the sizes and morphologies of polyaniline/graphene nanocomposites have been investigated. As the mass ratio of aniline and reduced graphene oxide is smaller than 12:1, polymerization reaction of aniline occurs on the surfaces of reduced graphene oxide by heterogeneous nucleation to form sandwich-like polyaniline/graphene composite nanosheets. However, besides sandwich-like polyaniline/graphene composite nanosheets, polyaniline nanofibers are formed by homogeneous nucleation. In comparison with reduced graphene oxide and polyaniline nanofibers, the obtained sandwich-like polyaniline/graphene composite nanosheets exhibit good electrochemical performances due to the synergistic effect between graphene and polyaniline.     

Synthesis and Electrochemical Performance of Co3O4/Graphene

Co3O4/reduced graphene oxide composites were synthesized via a simple electrochemical method from graphene oxide and Co（NO3）2·6H2O as raw materials.Co3O4 nanoparticles with sizes of around 30-50 nm were distributed on the surface of graphene nanosheets confirmed by scanning electron microscopy and transmission electron microscopy.Electrochemical properties of Co3O4/graphene composite were tested by cyclic voltammetry,galvanostatic charge-discharge,and electrochemical impedance spectroscopy.The Co3O4/reduced graphene oxide composite was used as the pseudocapacitor electrode in the 2 mol/L NaOH aqueous electrolyte solution.The Co3O4/reduced graphene oxide composite electrode exhibited a specific capacitance of 357 F/g at a current density of 0.5 A/g in a three-electrode system.72％ of capacitance was retained when the current density increased to 3 A/g.The Co3O4/reduced graphene oxide composite prepared electrodes show a high rate capability and excellent long-term stability.After 1000 cycles of charge and discharge,the capacitance is still maintained 87％ at a current density of 1 A/g,indicating that the composite is a oromising alternative electrode material used for supercapacitors.     

Electrochemical-reduced graphene oxide-modified carbon fiber as Pt–Au nanoparticle support and its high efficient electrocatalytic activity for formic acid oxidation

A simple electrochemical approach is developed to prepare reduced graphene oxide (RGO)-wrapped carbon fiber (CF) as a novel support for Pt–Au nanocatalysts. The obtained composite electrodes have been characterized by scanning electron microscopy (SEM), X-ray energy dispersive spectroscopy (EDX), thermal gravimetric analysis (TGA), and electrochemical methods. SEM images reveal that the Pt–Au nanoparticles deposited on RGO-wrapped CF (RGO/CF) electrode display smaller particle size and more uniform dispersion than those on the bare CF electrode. Cyclic voltammetry, linear sweep voltammetry, chronoamperometry, chronopotentiometry, Tafel plots, and electrochemical impedance spectroscopy (EIS) analyses demonstrate that the introduced RGO on CF electrode surface is beneficial to the dispersion of Pt–Au nanoparticles, as a consequence, to the enhancement of the electrocatalytic activity and the antipoisoning ability of Pt–Au towards formic acid electrooxidation.     

Preparation of Reduced Graphene Oxide/MnO Composite and Its Electromagnetic Wave Absorption Performance

The composite containing reduced graphene oxide and MnO nanoparticles (RGO/MnO) has been prepared via a one step pyrolysis method. The MnO nanoparticles were uniformly dispersed on the surface of RGO nanosheets forming MnO/RGO composite. The composite displays a maximum absorption of ‒38.9 dB at 13.5 GHz and the bandwidth of reflection loss corresponding to –10 dB can reach 4.9 GHz (from 11.5 to 16.4 GHz) with a coating layer thickness of only 2 mm. Therefore, the obtained RGO/MnO composite a perfect lightweight and high-performance electromagnetic wave absorbent.

     

Electrochemical Sensor for Sensitive Determination of Capsaicin Using Pd Decorated Reduced Graphene Oxide

In this work, the reduced graphene oxide functionalized with poly dimethyl diallyl ammonium chloride (PDDA) modified palladium nanoparticles (PDDA‐rGO/Pd) had been facile synthesized and used as the sensing layer for sensitive determination of capsaicin. The prepared composite was characterized by transmission electron microscopy, UV‐visible absorption spectroscopy. The image demonstrated that Pd nanoparticles were uniformly distributed on the graphene surface. The electrochemical properties of the prepared sensor were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results showed that the nanocomposite exhibits attractive electrocatalytic activity towards the oxidation of capsaicin. This attributed to the synergistic action of the excellent properties of Pd nanoparticles and graphene nanosheets. Under optimized conditions, the electrochemical sensor possessed a dynamic linear range from 0.32 μM to 64 μM with a detection limit of 0.10 μM (S/N=3) for capsaicin detection. Moreover, the cost‐effective and simple fabrication procedure, good reproducibility and stability as well as acceptable accuracy for capsaicin determination in actual samples are also the main advantages of this method, which might have broad application in other amide alkaloid detection.     

石墨烯载Pt纳米粒子的原位还原制备及氧还原电催化性能

采用改进的化学氧化还原法(Hummers法)氧化鳞片石墨, 再超声振荡剥离得到氧化石墨烯(GO)水溶液. 通过聚二烯丙基二甲基氯化铵(PDDA)分子对GO表面功能化, 由于带正电荷的PDDA分子功能化的GO与带负电荷的^2-离子间的静电作用, 使Pt离子组装到GO表面, 再通过原位还原被束缚的Pt离子, 同时GO被还原成石墨烯片(GNs), 得Pt/PDDA-GNs催化剂. 相对空白GNs负载的Pt纳米粒子和商业化Pt/C(JM), Pt/PDDA-GNs催化剂有较高的氧还原活性和稳定性. 前者可归因于Pt颗粒尺寸细小和分散度较高, 后者是由于PDDA分子与Pt原子间的电子作用及对Pt颗粒的钉扎作用, 从而减缓了Pt的氧化和迁移.     

Dual-mode sulfur-based cathode materials for rechargeable Li-S batteries

A novel dual-mode sulfur-based cathode material is prepared for the first time, in which sulfur is embedded in both the pyrolyzed PAN nanoparticles (pPAN) and mildly reduced graphene oxide nanosheets (mGO). The pPAN-S/mGO-S composite demonstrates outstanding electrochemical performances in the rechargeable Li-S batteries.     

Free‐standing and Flexible MoS2/rGO Paper Electrode for Amperometric Detection of Folic Acid

The development of flexible electrodes is of considerable current interest because of the increasing demand for modern electronics, portable medical products, and compact devices. We report a new type of flexible electrochemical sensor fabricated by integrating graphene and MoS₂ nanosheets. A highly flexible and free‐standing conductive MoS₂ nanosheets/reduced graphene oxide (MoS₂/rGO) paper was prepared by a two‐step process: vacuum filtration and chemical reduction treatment. The MoS₂/graphene oxide (MoS₂/GO) paper obtained by a simple filtration method was transformed into MoS₂/rGO paper after a chemical reduction process. The obtained MoS₂/rGO paper was characterized by scanning electron microscopy, X‐ray diffraction spectroscopy, X‐ray photoelectron spectroscopy, Raman spectroscopy, electrochemical impedance spectroscopy. The electrochemical behavior of folic acid (FA) on MoS₂/rGO paper electrode was investigated by cyclic voltammetry and amperometry. Electrochemical experiments indicated that flexible MoS₂/rGO composite paper electrode exhibited excellent electrocatalytic activity toward the FA, which can be attributed to excellent electrical conductivity and high specific surface area of the MoS₂/rGO paper. The resulting biosensor showed highly sensitive amperometric response to FA with a wide linear range.     

Preparation and characterization of palladium/polypyrrole-reduced graphene oxide/foamed nickel composite electrode and its electrochemical dechlorination of triclosan

In this study, a new composite electrode of palladium (Pd) nanoparticles dispersed on polypyrrole-reduced graphene oxide (PPy-rGO) loaded on foam-nickel was achieved by galvanostatic method. Characterization of structures, morphology and crystallinity of the synthesized materials were investigated by scanning electron microscopes (SEM), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Raman spectroscopy and electrochemical impedance spectroscopy (EIS). The results of XPS and XRD demonstrated Pd showed primarily as Pd0. From SEM and TEM results, we had seen that Pd nanoparticles were dispersible well on the composite electrode. Raman spectroscopy was used to show the state of graphene oxide and further demonstrated that PPy and rGO had existed of on the foam Ni matrix. The data of EIS also suggested the charge transfer of the new composite electrode decreased compared to Pd/PPy/foam-Ni and PPy/foam-Ni composite electrodes. The effect of the electropolymerization potential on Pd/PPy-rGO/foam-Ni electrode for removing triclosan (TCS) was examined. It was found that the removal efficiency of TCS on the composite electrode could reach 100% at electropolymerization potential of 0.7 V and reaction time of 100 min.