Specific features of the electrical conductivity of V<Subscript>4</Subscript>O<Subscript>7</Subscript> single crystals

The electrical conductivity of V₄O₇ single crystals has been measured over a wide temperature range, including both the region of existence of the metallic phase and the region of the metal-insulator transition. It has been shown that the low conductivity of metallic V₄O₇ is due to the strong electron-electron correlation, whose role increases with decreasing temperature as the phase-transition temperature is approached. The temperature dependence of the conductivity of the insulator phase of V₄O₇ is explained in terms of the theory of hopping conduction taking into account the influence of atomic thermal vibrations on the resonance integral.     

Resistive switching in β-SrV<Subscript>6</Subscript>O<Subscript>15</Subscript>

We investigate the pressure and temperature behavior of current-dependent resistivity of β-SrV₆O₁₅. We observe a switching between states of different resistivities in the insulating state of β-SrV₆O₁₅. In the low pressure phase, the resistive switching appears at temperatures below the semiconductor-insulator transition. In the high pressure phase, under ~1.6 GPa, the switching appears in the temperature range of the phase transition. The existence of switching may imply an important role of strontium off-stoichiometry for the electrical transport in β-SrV₆O₁₅. No electric-field-induced enhancement of the conductivity is observed. However, the conduction is significantly nonlinear under ~1.6 GPa, indicating that the charge order pattern in the high pressure phase is considerably different from that of the low pressure phase.     

Specific features of electrical conductivity of the insulating phase of vanadium dioxide doped with niobium

The electrical conductivity of V_{1 – x}Nb_xO₂ single crystals have been investigated over a wide temperature range covering regions of the existence of the metallic and insulating phases. It has been shown that, with an increase in the niobium concentration, the electrical conductivity of the metallic phase becomes below the Mott limit for the minimum metallic conductivity. Immediately after the metal–insulator transition, the electrical conductivity is determined by a large amount of free electrons that gradually localized with a decrease in the temperature. The temperature dependence of the electrical conductivity in the insulating phase of V_{1 – x}Nb_xO₂ has been explained in the framework of the hopping conductivity model that takes into account the effect of thermal vibrations of atoms on the resonance integral.     

Conductivity and spectroscopic studies of Li<Subscript>2</Subscript>O-V<Subscript>2</Subscript>O<Subscript>5</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> glasses

Lithium vanadium-borate glasses with the composition of 0.3Li₂O–(0.7-x)B₂O₃–xV₂O₅ (x?=?0.3, 0.325, 0.35, 0.375, 0.4, 0.425, 0.45, and 0.475) were prepared by melt-quenching method. According to differential scanning calorimetry data, vanadium oxide acts as both glass former and glass modifier, since the thermal stability of glasses decreases with an increase in V₂O₅ concentration. Fourier transform infrared spectroscopy data show that the vibrations of [VO₄] structural units occur at V₂O₅ concentration of 45 mol%. It is established that the concentration of V⁴⁺ ions increases exponentially with the growth of vanadium oxide concentration. Direct and alternative current measurements are carried out to estimate the contribution both electronic and ionic conductivities to the value of total conductivity. It is shown that the electronic conductivity is predominant in the total one. The glass having the composition of 0.3Li₂O-0.275B₂O₃-0.475V₂O₅ shows the highest electrical conductivity that has the value of 7.4?×?10^?5 S cm^?1 at room temperature.     

Metal-insulator transition in a radiation-disordered La<Subscript>0.85</Subscript>Sr<Subscript>0.15</Subscript>MnO<Subscript>3</Subscript> manganite

The temperature dependences of the electrical resistivity ρ(T) and the ac magnetic susceptibility χ(T, H = 0) are thoroughly investigated for a perovskite-like lanthanum manganite, namely, La_0.85Sr_0.15MnO₃, which is preliminarily exposed to neutron irradiation with a fluence _F = 2 × 10¹⁹ cm^?2 and then annealed at different temperatures ranging from 200 to 1000°C. The results of the electrical resistance measurements demonstrate that neutron irradiation of the samples leads to the disappearance of the low-temperature insulating phase. As the annealing temperature increases, the insulating phase is not restored and the manganite undergoes a transformation into a metallic phase. Analysis of the magnetic properties shows that, under irradiation, the ferromagnet-paramagnet phase transition temperature T_C decreases and the magnetic susceptibility is reduced significantly. With an increase in the annealing temperature, the phase transition temperature T_C and magnetic susceptibility χ(_{T, H} = 0) increase and gradually approach values close to those for an unirradiated sample. This striking difference in the behavior of the electrical and magnetic properties of the radiation-disordered La_0.85Sr_0.15MnO₃ manganite is explained qualitatively.     

Grain size effects on dynamics of Li-ions in Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> glass-ceramic nanocomposites

Li₃V₂(PO₄)₃ glass-ceramic nanocomposites, based on 37.5Li₂O-25V₂O₅-37.5P₂O₅ mol% glass, were successfully prepared via heat treatment (HT) process. The structure and morphology were investigated by X-ray diffraction (XRD) and scanning electron microscope (SEM). XRD patterns exhibit the formation of Li₃V₂(PO₄)₃ NASICON type with monoclinic structure. The grain sizes were found to be in the range 32–56 nm. The effect of grain size on the dynamics of Li⁺ ions in these glass-ceramic nanocomposites has been studied in the frequency range of 20 Hz–1 MHz and in the temperature range of 333–373 K and analyzed by using both the conductivity and modulus formalisms. The frequency exponent obtained from the power law decreases with the increase of temperature, suggesting a weaker correlation among the Li⁺ ions. Scaling of the conductivity spectra has also been performed in order to obtain insight into the relaxation mechanisms. The imaginary modulus spectra are broader than the Debye peak-width, but are asymmetric and distorted toward the high frequency region of the maxima. The electric modulus data have been fitted to the non-exponential Kohlrausch–Williams–Watts (KWW) function and the value of the stretched exponent β is fairly low, suggesting a higher ionic conductivity in the glass and its glass-ceramic nanocomposites. The advantages of these glass-ceramic nanocomposites as cathode materials in Li-ion batteries are shortened diffusion paths for Li⁺ ions/electrons and higher surface area of contact between cathode and electrolyte.     

Cells studies on PEO/PEG/NaClO<Subscript>3</Subscript> thin-film electrolyte system based on composite V<Subscript>2</Subscript>O<Subscript>5</Subscript> electrode

The thin-film solid polymer electrolyte based on polyethylene oxide (PEO) with sodium chlorite (NaClO₃) has been prepared by a solution-cast technique. The electrolyte was characterized by X-ray diffraction (XRD), infrared (IR), cyclic voltammetry, alternating current conductivity, and Wagner’s polarization studies. The complexation of NaClO₃ with PEO was confirmed through the XRD and IR studies. The transference number measurement has shown that the ion transport is predominant over electrons in the polymer electrolytes (t _ions ≈ 0.94). The conductivity enhancement was observed in the case of the PEO/NaClO₃ system with the addition of plasticizers (low-molecular-weight polyethylene glycol, organic solvents propylene carbonate and dimethyl formamide. Cyclic voltammetry analysis showed the stability and redox character of the electrolyte and electrode. Finally, polymer electrolyte systems were examined by electrochemical cell studies using V₂O₅ and composite V₂O₅ cathode at temperature of 35 °C. Overall, the plasticized electrolyte shows a better electrochemical performance, and a higher discharge capacity was observed in composite V₂O₅-based cells over V₂O₅-based cells.     

Structural,dielectric, electrical and piezoelectric properties of Ba<Subscript>4</Subscript>SrRTi<Subscript>3</Subscript>V<Subscript>7</Subscript>O<Subscript>30</Subscript> (R=Sm,Dy) ceramics

Polycrystalline samples of Ba₄SrRTi₃V₇O₃₀ (R=Sm and Dy), members of the tungsten-bronze family, were prepared using a high-temperature, solid-state reaction technique and studied their electrical properties (using complex impedance spectroscopy) in a wide range of temperature (31–500°C) and frequency (1 kHz-1 MHz). Preliminary structural (XRD) analyses of these compounds show the formation of single-phase, orthorhombic structures at room temperature. The scanning electron micrographs (SEM) provided information on the quality of the samples and uniform distribution of grains over the entire surface of the samples. Detailed studies of the dielectric properties suggest that they have undergone ferroelectric-paraelectric phase transition well above the room temperatures (i.e., 432 and 355°C for R= Sm and Dy, respectively, at frequency 100 kHz). Measurements of electrical conductivity (ac and dc) as a function of temperature suggest that the compounds have semiconducting properties much above the room temperature, with negative temperature coefficient of resistance (NTCR) behavior. The existence of ferroelectricity in these compounds was confirmed from a polarization study.      

Synthesis,sintering, and conductivity of Mn<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript>

Studies on the sintering of manganese pyrovanadate depending on the temperature and the crystallite size show that we are prevented from obtaining a bulk ceramic sample by the anisotropic growth of grains. Investigation of the electrical properties of Mn₂V₂O₇ in the temperature range of 250–800°C reveals the activation energy at which bulk conductivity is 0.62 eV.     

Spin transition and thermal expansion in the layered cobaltite GdBaCo<Subscript>2</Subscript>O<Subscript>5.5</Subscript>

The electrical conductivity and thermal expansion coefficient of GdBaCo₂O_5.5 samples have been measured in order to reveal the mechanism of the metal-insulator transition in cation-ordered cobaltites RBaCo₂O_5.5 (where R is a rare-earth element) and its relation to the change in the spin state of cobalt ions. It has been established that the unit cell volume considerably increases upon the transition to the metallic state at T _MI ≈ 360–365 K and that the thermal expansion exhibits anomalies (which are two orders of magnitude weaker) due to the ferromagnetic and antiferromagnetic orderings. The data obtained confirm that the spin transition in Co³⁺ ions actually proceeds simultaneously with the metal-insulator transition and excludes the possibility of stepwise spin transitions occurring at lower temperatures.     

Phase transition and electrical investigation in lithium copper pyrophosphate compound Li<Subscript>2</Subscript>CuP<Subscript>2</Subscript>O<Subscript>7</Subscript> using impedance spectroscopy

Lithium pyrophosphate compound Li₂CuP₂O₇ has been synthesized through solid state reaction method. FTIR and XRD results, realized at room temperature, indicate respectively the dominant feature of pyrophosphate anion (P₂O₇)^4? and a pure monoclinic phase with I2/a space group. Electrical and dielectric properties have been studied using impedance spectroscopy complex over a wide temperature (576–710 K) and frequency (209 Hz–1 MHz) range. From the direct and alternative conductivities (DC and AC), electrical conduction is found to be thermally activated process. The frequency-dependent AC conductivity obeys Jonscher’s universal power law σ_AC~Aω^s. The differential scanning calorimetry spectrum discloses phase transition at 622 K.     

Synthesis and properties of high-pressure phase [Er<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Cu<Subscript>3</Subscript>](V<Subscript>4</Subscript>)O<Subscript>12</Subscript>

A new perovskite-like compound Er_0.73Cu₃V₄O₁₂ (space group Im \(\bar 3\), Z = 2, a = 7.266 Å) has been synthesized barothermally (P = 8.0 GPa, t = 1000°C). Its electrical and magnetic properties have been studied. It is found that the temperature dependence of the electrical conductivity (in the range 78–300 K) has of semiconductor type. The behavior of the impedance and admittance has been analyzed at 290 K and frequencies of 200 Hz to 200 kHz under atmospheric pressure and at high (15–42 GPa) pressures.     

Anomalies of thermal expansion and electrical resistivity of layered cobaltates YBaCo<Subscript>2</Subscript>O<Subscript>5 + <Emphasis Type="Italic">x</Emphasis> </Subscript>: The role of oxygen chain ordering

Layered cobaltates YBaCo₂O_{5 + x} have been investigated in the oxygen concentration range 0.23 ≤ x ≤ 0.52. It has been revealed that the oxygen ordering plays the key role in the appearance of anomalies in temperature dependences of structural parameters and electron transport. It has been shown that the orthorhombic lattice distortion caused by oxygen chain ordering is a necessary “trigger” for the phase transition from the insulating state to the metallic state at T ≈ 290–295 K, after which the orthorhombic distortion is significantly more pronounced. In the boundary region of the cobaltate compositions, where the oxygen ordering has a partial or local character, there are additional low-temperature (100–240 K) structural and resistive features with a large hysteresis. The observed anomalies can be explained by a change in the spin state of the cobalt ions, which is extremely sensitive to parameters of the crystal field acting on the ions, as well as by the spin-transition-induced delocalization of electrons.     

Structural and electrical properties of KCa<Subscript>2</Subscript>Nb<Subscript>5</Subscript>O<Subscript>15</Subscript> ceramics

A polycrystalline sample of KCa₂Nb₅O₁₅ with tungsten bronze structure was prepared by a mixed oxide method at high temperature. A preliminary structural analysis of the compound showed an orthorhombic crystal structure at room temperature. Surface morphology of the compound shows a uniform grain distribution throughout the surface of the sample. Studies of temperature variation on dielectric response at various frequencies show that the compound has a transition temperature well above the room temperature (i.e., 105°C), which was confirmed by the polarization measurement. Electrical properties of the material have been studied using a complex impedance spectroscopy (CIS) technique in a wide temperature (31–500°C) and frequency (10²–10⁶ Hz) range that showed only bulk contribution and non-Debye type relaxation processes in the material. The activation energy of the compound (calculated from both the loss and modulus spectrum) is same, and hence the relaxation process may be attributed to the same type of charge carriers. A possible ‘hopping’ mechanism for electrical transport processes in the system is evident from the modulus analysis. A plot of dc conductivity (bulk) with temperature variation demonstrates that the compound exhibits Arrhenius type of electrical conductivity.      

The transport and thermal properties of glassy LiPO<Subscript>3</Subscript>/crystalline Al<Subscript>2</Subscript>O<Subscript>3</Subscript> (ZrO<Subscript>2</Subscript>) composite electrolytes

Glassy LiPO₃/crystalline Al₂O₃ and glassy LiPO₃/crystalline ZrO₂ (0–12.5 vol.% of oxide fillers) composite solid electrolytes have been prepared by glass matrix softening. Their thermal and transport properties have been investigated by differential scanning calorimetry (DSC) and impedance spectroscopy methods. The addition of ZrO₂ leads to a decrease in the crystallization temperature of LiPO₃ glass. It was found that the conductivity behavior depends on the nature of the dispersed addition. In the case of the Al₂O₃ addition, the increase in the electrical conductivity is observed. The ionic conductivity of the LiPO₃/10% Al₂O₃ composite reaches 5.8 × 10^?8 S/cm at room temperature. In contrast, the conductivity in the LiPO₃/ZrO₂ composite system decreases.     

Two-dimensional electron gas at the interface of Ba<Subscript>0.8</Subscript>Sr<Subscript>0.2</Subscript>TiO<Subscript>3</Subscript> ferroelectric and LaMnO<Subscript>3</Subscript> antiferomagnet

The temperature dependence of the electrical resistance has been studied for heterostructures formed by antiferromagnetic LaMnO₃ single crystals of different orientations with epitaxial films of ferroelectric Ba_0.8Sr_0.2TiO₃ deposited onto them. The measured electrical resistance is compared to that exhibited by LaMnO₃ single crystals without the films. It is found that, in the samples with the film, for which the axis of polarization in the ferroelectric is directed along the perpendicular to the surface of the single crystal, the electrical resistance decreases significantly with temperature, exhibiting metallic behavior below 160 K. The numerical simulations of the structural and electronic characteristics of the BaTiO₃/LaMnO₃ ferroelectric?antiferromagnet heterostructure has been performed. The transition to the state with two-dimensional electron gas at the interface is demonstrated.     

Electrochemical properties of Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C cathode materials synthesized via ethylene glycol-assisted solvothermal method

The Li₃V₂(PO₄)₃/C (LVP/C) cathode materials for lithium-ion batteries were synthesized via ethylene glycol-assisted solvothermal method. The phase composition, phase transition temperature, morphology, and fined microstructure were studied using X-ray diffraction (XRD), differential thermal analyzer (DTA), scanning electron microscope (SEM), and transmission electron microscope (TEM), respectively. The electrochemical properties, impedance, and electrical conductivity of LVP/C cathode materials were tested by channel battery analyzer, the electrochemical workstation, and the Hall test system, respectively. The results shown that the appropriate amount of water added to ethylene glycol solvent contributes to the synthesis of pure phase LVP. The LVP₁₀/C cathode material can exhibit discharge capacities of 128, 126, 126, 123, 124, and 114 mAh g^?1 at 0.1, 0.5, 2, 5, 10, and 20 C in the voltage range of 3.0–4.3 V, respectively. Meanwhile, it shows also a stable cycling performance with the capacity retention of 89.6% after 180 cycles at 20 C.     

Nonstoichiometric high-pressure phase of Tm<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Cu<Subscript>3</Subscript>V<Subscript>4</Subscript>O<Subscript>12</Subscript>

Tm _x Cu₃V₄O₁₂, a perovskite-like oxide (space group, Im-3; Z = 2; a = 7.279–7.293 Å) containing vacancies in its cationic sublattice, was obtained barothermally (P = 7.0–9.0 GPa, t = 1000–1100°C) for the first time. The temperature dependences on the electrical resistivity (10–300 K) and the magnetic susceptibility (0–300 K) were investigated. It was shown that the oxide Tm _x Cu₃V₄O₁₂ is characterized by metal-type conductivity and paramagnetic properties.     

Dielectric properties,ionic conductivity and phase transitions in La<Subscript>2</Subscript>Mo<Subscript>2</Subscript>O<Subscript>9</Subscript> ceramics

The dspersion dielectric permeability and ion conductivity of La₂Mo₂O₉ ceramics was studied. It was established that the observed low-frequency dielectric dispersion is due to relaxation effects related to high ion conductivity. It is shown that the phase transition in La₂Mo₂O₉ has characteristic features of a superionic phase transition.     

Magnetic structure and phase diagram of Sr<Subscript>5</Subscript>Rh<Subscript>4</Subscript>O<Subscript>12</Subscript> frustrated Ising magnet

The magnetic structure of Sr₅Rh₄O₁₂ is based on Ising chains of rhodium ions with a variable valence, Rh³⁺-Rh⁴⁺. The ordering in the chains is assumed to be ferromagnetic. It has been shown that the magnetic structure and phase diagram of Sr₅Rh₄O₁₂ are well described in a model taking into account weak antiferromagnetic interactions between the nearest and next-nearest neighbors on the triangular lattice of ferromagnetic Ising chains. The ground state at low temperatures is the two-sublattice stripe phase; this phase in the magnetic field is transformed to the ferrimagnetic phase and, then, to the ferromagnetic phase. Small plateaus can be observed in the region of the transition from the ferrimagnetic phase to the ferromagnetic one.