Reaction of SO2 with AuCeO2(111): importance of O vacancies in the activation of gold

Synchrotron-based high-resolution photoemission was used to study the adsorption and chemistry of SO(2) on AuCeO(2)(111) and AuO(x)CeO(2) surfaces. The heat of adsorption of the molecule on Au nanoparticles supported on stoichiometric CeO(2)(111) was 4-7 kcalmol larger than on Au(111). However, there was negligible dissociation of SO(2) on the AuCeO(2)(111) surfaces. The full decomposition of SO(2) was observed only after introducing O vacancies in the ceria support. AuO(x)CeO(2) surfaces were found to be much less chemically active than AuCeO(2)(111) or AuCeO(2-x)(111) surfaces. The active sites in {Au + AuO(x)}ceria catalysts should involve pure gold nanoparticles in contact with O vacancies.     

In situ time-resolved characterization of Au-CeO2 and AuOx-CeO2 catalysts during the water-gas shift reaction: presence of Au and O vacancies in the active phase

Synchrotron-based in situ time-resolved x-ray diffraction and x-ray absorption spectroscopies were used to study the behavior of nanostructured {Au+AuO(x)}-CeO(2) catalysts under the water-gas shift (WGS) reaction. At temperatures above 250 degrees C, a complete AuO(x)-->Au transformation was observed with high catalytic activity. Photoemission results for the oxidation and reduction of Au nanoparticles supported on rough ceria films or a CeO(2)(111) single crystal corroborate that cationic Au(delta+) species cannot be the key sites responsible for the WGS activity at high temperatures. The rate determining steps for the WGS seem to occur at the gold-ceria interface, with the active sites involving small gold clusters (<2 nm) and O vacancies.     

Thermodynamic, electronic and structural properties of Cu/CeO2 surfaces and interfaces from first-principles DFT+U calculations

The thermodynamic, structural and electronic properties of Cu-CeO(2) (ceria) surfaces and interfaces are investigated by means of density functional theory (DFT+U) calculations. We focus on model systems consisting of Cu atoms (i) supported by stoichiometric and reduced CeO(2) (111) surfaces, (ii) dispersed as substitutional solid solution at the same surface, as well as on (iii) the extended Cu(111)/CeO(2)(111) interface. Extensive charge reorganization at the metal-oxide contact is predicted for ceria-supported Cu adatoms and nanoparticles, leading to Cu oxidation, ceria reduction, and interfacial Ce(3+) ions. The calculated thermodynamics predict that Cu adatoms on stoichiometric surfaces are more stable than on O vacancies of reduced surfaces at all temperatures and pressures relevant for catalytic applications, even in extremely reducing chemical environments. This suggests that supported Cu nanoparticles do not nucleate at surface O vacancies of the oxide, at variance with many other metal/ceria systems. In oxidizing conditions, the solid solutions are shown to be more stable than the supported systems. Substitutional Cu ions form characteristic CuO(4) units. These promote an easy and reversible O release without the reduction of Ce ions. The study of the extended CeO(2)(111)/Cu(111) interface predicts the full reduction of the interfacial ceria trilayer. Cu nanoparticles supported by ceria are proposed to lie above a subsurface layer of Ce(3+) ions that extends up to the perimeter of the metal-oxide interface.     

Optically transparent Au{111} substrates: flat gold nanoparticle platforms for high-resolution scanning tunneling microscopy

We demonstrate a new type of Au{111} substrate that is both atomically flat and optically transparent, which consists of solution-grown flat gold nanoparticles (FGNPs) deposited on indium tin oxide (ITO)-coated glass. We show that FGNPs are atomically flat single-crystal plates with large {111} faces that expose only 2-4 atomic layers. These FGNPs are excellent platforms for alkanethiol self-assembled monolayers (SAMs) and for high-resolution scanning tunneling microscopy (STM). Our supported FGNPs are also low-cost Au{111} substrates, employing only basic wet chemical techniques in preparation. This approach should be broadly applicable to other types of substrates for scanning probe microscopies.     

Au <--> N synergy and N-doping of metal oxide-based photocatalysts

N-doping of titania makes photocatalytic activity possible for the splitting of water, and other reactions, under visible light. Here, we show from both theory and experiment that Au preadsorption on TiO2 surfaces significantly increases the reachable amount of N implanted in the oxide. The stabilization of the embedded N is due to an electron transfer from the Au 6s levels toward the N 2p levels, which also increases the Au-surface adhesion energy. Theoretical calculations predict that Au can also stabilize embedded N in other metal oxides with photocatalytic activity, such as SrTiO3 and ZnO, producing new states above the valence band or below the conduction band of the oxide. In experiments, the Au/TiN(x)O(2-y) system was found to be more active for the dissociation of water than TiO2, Au/TiO2, or TiO(2-y). Furthermore, the Au/TiN(x)O(2-y) surfaces were able to catalyze the production of hydrogen through the water-gas shift reaction (WGS) at elevated temperatures (575-625 K), displaying a catalytic activity superior to that of pure copper (the most active metal catalysts for the WGS) or Cu nanoparticles supported on ZnO.     

A new type of strong metal-support interaction and the production of H2 through the transformation of water on Pt/CeO2(111) and Pt/CeO(x)/TiO2(110) catalysts

The electronic properties of Pt nanoparticles deposited on CeO(2)(111) and CeO(x)/TiO(2)(110) model catalysts have been examined using valence photoemission experiments and density functional theory (DFT) calculations. The valence photoemission and DFT results point to a new type of "strong metal-support interaction" that produces large electronic perturbations for small Pt particles in contact with ceria and significantly enhances the ability of the admetal to dissociate the O-H bonds in water. When going from Pt(111) to Pt(8)/CeO(2)(111), the dissociation of water becomes a very exothermic process. The ceria-supported Pt(8) appears as a fluxional system that can change geometry and charge distribution to accommodate adsorbates better. In comparison with other water-gas shift (WGS) catalysts [Cu(111), Pt(111), Cu/CeO(2)(111), and Au/CeO(2)(111)], the Pt/CeO(2)(111) surface has the unique property that the admetal is able to dissociate water in an efficient way. Furthermore, for the codeposition of Pt and CeO(x) nanoparticles on TiO(2)(110), we have found a transfer of O from the ceria to Pt that opens new paths for the WGS process and makes the mixed-metal oxide an extremely active catalyst for the production of hydrogen.     

Oxidising CO to CO2 using ceria nanoparticles

We calculate, using simulated amorphisation and recrystallisation (A&R), that ceria (CeO2) nanoparticles, about 8 nm in diameter, comprise a high concentration of labile surface oxygen species, which we suggest will help promote the oxidation of CO to CO2. In particular, the ceria nanoparticle contains a high proportion of reactive {100} surfaces, surface steps and corner sites. When reduced to CeO1.95, the associated Ce3+ species and oxygen vacancies decorate step, corner and {100} sites in addition to plateau positions on {111}. The energetics of CO oxidation to CO2, catalysed by a ceria nanoparticle, is calculated to be lower compared with CO oxidation associated with the lowest energy surface (i.e. CeO2(111)) of the corresponding 'bulk' material. Our calculated morphologies for the ceria nanoparticles are in accord with experiment.     

从头开始理解形貌依赖的CuOx-CeO2相互作用

CuOx/CeO2催化剂在CO氧化反应中表现出高催化活性和显著结构敏感性.文献报道中CuOx/CeO2催化剂体系的合成条件差异较大,从而导致观察到的CuOx-CeO2相互作用存在较大争议.因此,系统研究并阐明CuOx/CeO2催化剂中CuOx-CeO2相互作用对于理解复杂的CuOx-CeO2界面催化作用具有重要的研究意义.近期发现,氧化物纳米晶的形貌可作为一种新的结构参数,在不改变氧化物催化剂组成的条件下实现其结构和性能的调控.本文以不同形貌CeO2纳米晶为载体,包括优先暴露{110}+{100}晶面的CeO2纳米棒、优先暴露{100}晶面的CeO2纳米立方体和优先暴露{111}晶面的CeO2纳米多面体,采用等体积浸渍方法合成了Cu担载量为0.025%~5%的CuOx/CeO2纳米晶催化剂,结合谱学和电镜表征方法,以及CO吸附原位红外光谱,系统研究了CuOx物种在不同形貌CeO2纳米晶上的结构演化及其催化CO氧化的构-效关系.结构表征结果表明, CuOx物种结构不仅依赖于Cu的担载量,也依赖于载体CeO2的形貌.随着Cu担载量的增加, CuOx物种优先沉积在CeO2的表面缺陷位,然后聚集和长大;同时伴随着CuOx物种从孤立Cu离子到与载体强/弱相互作用的CuOx团簇,高分散Cu O颗粒和大尺寸Cu O颗粒.孤立Cu^+离子和与载体弱相互作用CuOx团簇主要形成于CeO2纳米立方体的表面,这可能与CeO2纳米立方体暴露的氧终止CeO2{100}晶面相关.CO吸附原位红外结果表明, CuOx团簇与不同CeO2表面相互作用的强度顺序为:CeO2纳米棒暴露的{110}面>CeO2纳米多面体暴露的{111}面>CeO2纳米立方体暴露的{100}面.CeO2纳米立方体与Cu2+离子间相互作用弱于与Cu^+之间的,因此CeO2纳米立方体负载的CuOx物种在CO还原过程中容易停留在稳定的Cu^+中间物种;而CeO2纳米棒与Cu2+离子之间的相互作用强于与Cu^+之间的相互作用,因此CeO2纳米棒负载的CuOx物种在CO还原过程中容易形成金属铜.因此CO吸附原位红外光谱观察到CeO2纳米立方体负载CuOx催化剂中吸附在Cu^+的CO物种远远多于CeO2纳米棒负载CuOx催化剂.CO氧化反应结果表明, CuOx/CeO2催化剂表现出同时依赖于CuOx物种结构和CeO2形貌的结构敏感性.CuOx/CeO2催化剂活性表现出与CuOx/CeO2催化剂的CO还原性能的正相关性,说明中CuOx/CeO2催化CO氧化反应遵循Mv K反应机理.这些结果系统地关联了CeO2形貌, CuOx-CeO2相互作用, CuOx物种结构和CeO2还原性能, CuOx/CeO2催化CO氧化反应活性.     

Shape-selective synthesis and oxygen storage behavior of ceria nanopolyhedra, nanorods, and nanocubes

Single-crystalline and uniform nanopolyhedra, nanorods, and nanocubes of cubic CeO2 were selectively prepared by a hydrothermal method at temperatures in the range of 100-180 degrees C under different NaOH concentrations, using Ce(NO3)3 as the cerium source. According to high-resolution transmission electron microscopy, they have different exposed crystal planes: {111} and {100} for polyhedra, {110} and {100} for rods, and {100} for cubes. During the synthesis, the formation of hexagonal Ce(OH)3 intermediate species and their transformation into CeO2 at elevated temperature, together with the base concentration, have been demonstrated as the key factors responsible for the shape evolution. Oxygen storage capacity (OSC) measurements at 400 degrees C revealed that the oxygen storage takes place both at the surface and in the bulk for the as-obtained CeO2 nanorods and nanocubes, but is restricted at the surface for the nanopolyhedra just like the bulk one, because the {100}/{110}-dominated surface structures are more reactive for CO oxidation than the {111}-dominated one. This result suggests that high OSC materials might be designed and obtained by shape-selective synthetic strategy.     

Fe3O4(111)面上的水煤气变换反应机理

水煤气变换是一重要的制备氢气的反应, 采用密度泛函理论(DFT), 对水煤气变换反应在Fe₃O₄ (111)面上的催化反应作了深入研究. 结果表明: 氧化还原机理的活化能明显高于结合机理的活化能, 中间步骤应以结合机理进行|氢原子结合生成氢气为整个反应的速控步骤, 理论计算其活化能与水煤气变换实验数据一致, 高达1.29 eV, 还对迄今有关水煤气变换机理研究中的各种实验现象作了合理的解释, 并对Fe₃O₄ (111)催化剂的改性设计作了讨论.     

Surface structural evolution in iron oxide thin films

Ordered iron oxide ultrathin films were fabricated on a single-crystal Mo(110) substrate under ultrahigh vacuum conditions by either depositing Fe in ambient oxygen or oxidizing preprepared Fe(110) films. The surface structure and electronic structure of the iron oxide films were investigated by various surface analytical techniques. The results indicate surface structural transformations from metastable FeO(111) and O-terminated Fe(2)O(3)(0001) to Fe(3)O(4)(111) films, respectively. The former depends strongly on the oxygen pressure and substrate temperature, and the latter relies mostly upon the annealing temperature. Our experimental observations are helpful in understanding the mechanisms of surface structural evolution in iron oxides. The model surfaces of Fe-oxide films, particularly O-terminated surfaces, can be used for further investigation in chemical reactions (e.g., in catalysis).     

Shape-controlled synthesis of gold icosahedra and nanoplates using Pluronic P123 block copolymer and sodium chloride

Gold icosahedra with an average diameter of about 600 nm were easily prepared by heating an aqueous solution of the amphiphilic block copolymer, poly(ethylene oxide)₂₀-poly(propylene oxide)₇₀-poly(ethylene oxide)₂₀ (Pluronic P123), and hydrogen tetrachloroaurate(III) trihydrate (HAuCl₄·3H₂O) at 60 °C for 25 min. When sodium chloride (NaCl:HAuCl₄ molar ratio=10:1) was added to this aqueous solution, gold nanoplates were produced. The chloride ion was found to be a key component in the formation of the gold nanoplates by facilitating the growth of {111} oriented hexagonal/triangular gold nanoplates, because similar gold nanoplates were produced when LiCl or KCl was added to the aqueous solution instead of NaCl, while gold nanocrystals having irregular shapes were produced when NaBr or NaI was added.     

Reactions inside a porous nanocapsule/artificial cell: encapsulates' structuring directed by internal surface deprotonations

In the cavities of unprecedentedly functionalised, spherical, porous capsules of the type {Pentagon}12{Linker}30 identical with [{(Mo)Mo5O21(H2O)6}12{Mo2O4(ligand)}30]n- reactions with the ligands -i.e. at the internal shell surfaces - can be performed, in the present case deliberate aquation/hydration and deprotonation reactions at the linker fragments {(Mo2O4)C2O4H}+ similar to that reported in the literature for [(NH3)5CoC2O4H]2+ in solution.     

Facile synthesis of concave gold nanoplates in hexagonal liquid crystal made of SDS/water system

Concave gold nanoplates are obtained in hexagonal liquid crystal (LLC) made of SDS (sodium dodecyl sulfate)/glycine/HAuCl(4) aqueous solution system where glycine plays the key role. All plates are single-crystals, characterized by {111} facets, with concave centers of regular hexagonal or triangular shapes, and with better electrocatalytic activity than gold nanoplates.     

CO氧化反应中的二氧化铈晶面效应

二氧化铈(CeO2)因其具有较强的储放氧能力,被用作氧化还原反应的催化材料.自2005年,研究者制备出形貌可控的CeO2纳米棒、纳米立方块和纳米多面体,在CeO2形貌控制及构效关系研究方面取得长足发展.各种结构表征手段包括原位拉曼(in situ Raman)、原位傅里叶变换红外光谱(in situ DRIFTS)、核磁共振(NMR)和电镜等被用来研究不同形貌CeO2的表面结构和在催化反应中的活性差异.一般的活性规律为CeO2纳米棒({110}/{100})>纳米立方块({100})>纳米多面体({111}/{100}).近年来,负载型CeO2催化剂因其能稳定分散金属,通过金属-载体相互作用调控界面电子结构并表现出优异的催化活性而引起广泛关注,其中晶面效应在负载型CeO2催化体系中显得较为复杂.铜铈催化剂被认为是非常经济有效的CO氧化催化剂,然而由于制备和测试条件差异导致的CeO2晶面对铜铈催化剂催化CO氧化活性的影响规律并不统一.我们之前的研究工作发现纳米棒CeO2-{110}晶面上的Cu-[Ox]-Ce结构不利于形成Cu((40)),而纳米颗粒CeO2-{111}晶面上的CuOx团簇很容易形成Cu((40)),从而对CO催化氧化极为有利,这与纯载体CeO2的规律并不一致.与此同时,对于铜负载的CeO2纳米棒(NR)及纳米立方体(NC)所体现的性质及活性差异缺少系统深入的研究.在上述工作基础上,我们采用沉积沉淀法在CeO2 NR及CeO2 NC上负载1%wt的铜分别得到1Cu CeNR和1Cu CeNC,并对所合成催化剂的结构和吸附性能进行了表征.高分辨透射电镜(HRTEM)照片显示,CeO2纳米棒主要暴露{110}晶面,而CeO2纳米立方体以{100}晶面为主.催化测试结果表明,1Cu CeNC在130℃时CO已完全转化为CO2,而相同温度下1Cu Ce NR只有50%转化.进一步通过氢气程序升温还原(H2-TPR)和一氧化碳程序升温脱附(CO-TPD)分析发现, 1Cu Ce NC催化剂具有较强的还原性且表面氧物种含量高.此外, X射线光电子能谱(XPS)和in situ DRIFTS研究表明, 1Cu Ce NC促进Cu((40))位点生成,导致活性Cu((40))-CO物种增多,这些优异的化学性质导致其具有较高的催化CO氧化活性.     

Elucidating the effect of additives on the growth and stability of Cu2O surfaces via shape transformation of pre-grown crystals

A new strategy of using pre-grown crystals to study preferential adsorption of various additives is demonstrated for the electrocrystallization of Cu2O. In this method, micron-size Cu2O crystals with well-defined cubic and octahedral shapes were first electrochemically grown, and their crystallization was resumed in a medium containing the additive to be investigated (e.g., Na+, NH4+, SO42-, Cl-, dodecyl sulfate). This method makes it possible to systematically study the interaction of additives with specific planes (e.g., {100} of a cube and {111} of an octahedron) already present. By observing shape transformation over time, the relative stabilities of {100}, {111}, and {110} planes of Cu2O in various growth media could be determined. During this study, a general scheme of forming new crystal shapes containing crystallographic planes that cannot be directly stabilized by preferential adsorption alone was also established (i.e., rhombicuboctahedral shape of Cu2O containing {110} planes). This method can be extended to other crystal systems, which will enable us to classify common features of additives (e.g., charges, type of atoms) and crystallographic planes (e.g., atomic arrangement, surface termination, surface charge) required to allow for strong preferential adsorption.     

Fabrication of electroactive layer-by-layer films of myoglobin with gold nanoparticles of different sizes

Alternate adsorption of oppositely charged myoglobin (Mb) and gold nanoparticles with different sizes were used to assemble {Au/Mb}n layer-by-layer films on solid surfaces by electrostatic interaction between them. The direct electrochemistry of Mb was realized in {Au/Mb}n films at pyrolytic graphite (PG) electrodes, showing a pair of well-defined, nearly reversible cyclic voltammetry (CV) peaks for the Mb heme FeIII/FeII redox couple. Quartz crystal microbalance (QCM), electrochemical impedance spectroscopy (EIS), and CV were used to monitor or confirm the growth of the films. Compared with other Mb layer-by-layer films with nonconductive nanoparticles or polyions, {Au/Mb}n films showed much improved properties, such as smaller electron-transfer resistance (Rct) measured by EIS with Fe(CN)3-/4- redox probe, higher maximum surface concentration of electroactive Mb (Gamma*max), and better electrocatalytic activity toward reduction of O2 and H2O2, mainly because of the good conductivity of Au nanoparticles. Because of the high biocompatibility of Au nanoparticles, adsorbed Mb in the films retained its near native structure and biocatalytic activity. The size effect of Au nanoparticles on the electrochemical and electrocatalytic activity of Mb in {Au/Mb}n films was investigated, demonstrating that the {Au/Mb}n films assembled with smaller-sized Au nanoparticles have smaller Rct, higher Gamma*max, and better biocatalytic reactivity than those with larger size.     

One-step synthesis of stoichiometrically defined metal oxide nanoparticles at room temperature

A great variety of metal oxide nanoparticles have been readily synthesized by using alkali metal oxides, M(2)O (M is Na or Li) and soluble metal salts (metal chlorides) in polar organic solutions, for example, methanol and ethanol, at room temperature. The oxidation states of the metals in the resulting metal oxides (Cu(2)O, CuO, ZnO, Al(2)O(3), Fe(2)O(3), Bi(2)O(3), TiO(2), SnO(2), CeO(2), Nb(2)O(5), WO(3), and CoFe(2)O(4)) range from 1 to 6 and remain invariable through the reactions where good control of stoichiometry is achieved. Metal oxide nanoparticles are 1-30 nm and have good monodispersivity and displayed comparable optical spectra. These syntheses are based on a general ion reaction pathway during which the precipitate occurs when O(2-) ions meet metal cations (M(n+)) in anhydrous solution and the reaction equation is M(n+) + n/2 O(2-) --> MO(n/2) (n=1-6).     

Diffusion processes and growth on aluminum cluster surfaces

Diffusion processes of adatoms on icosahedral and Wulff polyhedral aluminum cluster surfaces have been studied by molecular dynamics simulations using the effective medium theory. Activation energies of diffusion mechanisms along {111} and {100} facets and from one facet to another, including different hopping and exchange processes as well as more exotic events, have been calculated. Exchange diffusion of an adatom by a chain mechanism through a {100} facet between two {111} facets and hopping diffusion across the edge between two {111} facets via a pull of another adatom on the neighbour facet are shown to play an important role. Adatoms on {111} facets are mobile already at very low temperatures, but on {100} facets diffusion starts above the room temperature as well as diffusion from {111} facets to {100} facets. Diffusion from {100} facet to other facets was not observed until at temperatures close to the melting temperatures of clusters. Dynamical simulations at different temperatures confirmed the appearance of diffusion mechanisms predicted by the activation energies.