Influence of temperature on the optical and structural properties along the diameter of optical fibres

Multiple-beam Fizeau fringes technique with an opto-thermal device is used to study the effect of temperature on the optical properties of Philips graded-index optical fibres. The refractive index profile of the optical fibre is measured at different temperatures. From these profiles the opto-thermal coefficient, the profile shape parameter α, the cladding/core maximum refractive index difference Δn and some guidance parameters of the optical fibre that play an important role in communication are determined. The variation of oscillation and dispersion energies along the diameter of the optical fibre (energy profile) are calculated at different temperatures. An empirical formula of the energy profile is obtained. Microinterferograms are given for illustrations.     

Automatic fringe analysis of the induced anisotropy of bent optical fibres

A new theoretical model considering the refraction of the incident light beam by the fibre is suggested to determine the refractive index profile of bent optical fibres. This new model (slabs model) considering the cross section of the bent optical fibre consists of large number of slabs. The slabs model bases on the refraction of the incident beam by the fibre. The refractive index profile of the optical fibre cladding before bending obtained using the automated Fizeau interferometer with the aid of suggested model is compared with other models such as, the homogenous model and the multilayer model to verify the ability of this slab model. The refractive index profile of the bent optical fibre cladding is investigated using this suggested model. In addition, the new model is used to obtain the induced birefringence and the guiding parameters. The bending radius is recommended to be greater than 7.1 mm for the used optical fibre. The consideration of the refraction increases the accuracy of the results.     

Polarization dependent dispersion and its impact on optical parametric process in high nonlinear microstructure fibre

High nonlinear microstructure fibre （HNMF） is preferred in nonlinear fibre optics, especially in the applications of optical parametric effects, due to its high optical nonlinear coefficient. However, polarization dependent dispersion will impact the nonlinear optical parametric process in HNMFs. In this paper, modulation instability （MI） method is used to measure the polarization dependent dispersion of a piece of commercial HNMF, including the group velocity dispersion, the dispersion slope, the fourth-order dispersion and group birefringence. It also experimentally demonstrates the impact of the polarization dependent dispersion on the continuous wave supercontinuum （SC） generation. On one axis MI sidebands with symmetric frequency detunings are generated, while on the other axis with larger MI frequency detuning, SC is generated by soliton self-frequency shift.     

Comprehensive research on self phase modulation based optical delay systems

This paper comprehensively investigates the properties of self phase modulation based optical delay systems consisting of dispersion compensation fibre and highly nonlinear fibres.It researches into the impacts of power level launched into highly nonlinear fibres,conversion wavelength,dispersion slope,modulation format and optical filter bandwidth on the overall performance of optical delay systems.The results reveal that,if the power launched into highly nonlinear fibres is fixed,the time delay generally varies linearly with the conversion wavelength,but jumps intermittently at some conversion wavelengths.However,the time delay varies semi-periodically with the power launched into highly nonlinear fibres.The dispersion slope of highly nonlinear fibres has significant influence on the time delay,especially for the negative dispersion slope.The time delay differs with modulation formats due to the different combined interaction of nonlinearity and dispersion in fibres.The bandwidth of the optical filters also greatly affects the time delay because it determines the bandwidth of the passed signal in the self phase modulation based time delay systems.The output signal quality of the overall time delay systems depends on the conversion wavelength and input power level.The optimisation of the power level and conversion wavelength to provide the best output signal quality is made at the end of this paper.     

Supercontinuum spectra generation in the single-mode optical fibre with concave dispersion profile

In this paper, a new method is proposed to generate broad supercontinuum (SC) spectra in the single-mode optical fibre with concave dispersion profile. We numerically simulate pulse evolutions and discuss physics mechanism in detail for SC spectrum generation in the optical fibre with concave dispersion profile. Furthermore, general criteria are presented for specifying the shape of SC spectrum by introducing normalized parameters, which are related to the fibres and the initial pump pulses. The results show that the flat and broad SC spectra are indeed generated in our proposed optical fibre.     

Improving performance of optical fibre chaotic communication by dispersion compensation techniques

This paper numerically investigates the effects of dispersion on optical fibre chaotic communication, and proposes a dispersion compensation scheme to improve the performance of optical fibre chaotic communication system. The obtained results show that the transmitter-receiver synchronization progressively degrades and the signal-to-noise ratio of the recovered message deteriorates as the fibre length increases due to the dispersion accumulation. Two segments of 2.5-km dispersion-compensating fibres are symmetrically placed at both ends of a segment of 245-km nonzero dispersionshifted fibre with low dispersion in one compensation period. The numerical results show that the signal-to-noise ratio of the extracted 1 GHz sinusoidal message is improved from -2.92 dB to 15.38 dB by this dispersion compensation for the transmission distance of 500 km.     

Fundamental studies on laser radiation therapy: dispersion of a laser beam passing through optical fibres

For laser internal therapy in medical applications, optical fibres are required to propagate the laser beam. The far-field pattern of the laser beam at the exit face of the optical fibre is studied using a multimode step-index fibre and a graded index Selfoc fibre. The degree of dispersion, or the output angular distribution, of the beam passing through the Selfoc fibre is much smaller than that passing through the multimode step-index fibre. Consequently, the energy density in the far-field pattern of the beam passing through the Selfoc fibre is very much larger than that for the beam passing through the multimode step-index fibre. It is concluded that the Selfoc fibre is more effective in laser internal therapy.     

4×10Gb/s 400km 啁啾光纤光栅色散补偿研究

介绍了利用光纤光栅成功实现了4×10Gb/s 400km G-652光纤的色散补偿，各信道传输部分在误码率为10-10时，无误码传输的功率代价均小于2dB，且最好的功率代价为负值- 关键词： 光纤光栅 色散补偿 功率代价     

Determination of GR-IN optical fibre parameters from transverse interferograms considering the refraction of the incident ray by the fibre

The core–cladding refractive index difference Δn and the index gradient profile parameter of the graded index (GR-IN) optical fibre has been determined. The curve representing the real path, in the core region, due to refraction of the beam and the change in the exit wavefront are considered. Multiple-beam Fizeau fringes and two-beam interference Pluta polarizing microscope, are used for this investigation. A new method, based on a derived mathematical expression, is used with a prepared computer program to estimate the fringe shift inside GR-IN of the fibre core. The estimated and experimental values of the fringe shift, along the core radius, are used to obtain the refractive index profile of the optical fibre. A comparison between the new method and a previous model considering the refraction has been shown. Microinterferograms are given for illustrations.     

Polymer optical fibre Bragg gratings based fibre laser

For the first time the fibre laser constructed from a polymer optical fibre Bragg grating is reported. The single frequency laser with the peak power of −5 dBm and signal to noise ratio greater than 45 dB has been achieved. Further examination demonstrates the excellent characteristics of the fibre laser. First, the fibre laser can be easily tuned over 35 nm by the simple axial tension method. Second, the fibre laser has the high strain sensitivity of 1.48 pm/με with the dynamic measurement range as large as 2.37%.     

Three-dimensional optical profilometry using a four-core optical fibre

This paper describes the use of a four-core optical fibre for measurements of three-dimensional rigid-body shapes. A fringe pattern, which is generated by interference of four wavefronts emitted from the four-core optical fibre, is projected on an object's surface. The deformed fringe pattern containing information of the object's surface topography is captured by a digital CCD camera and is analysed using a two-dimensional Fourier transform profilometry. It is demonstrated for the first time that the use of such a four-core optical fibre increases the compactness and the stability of the fringe projection system.     

Holey optical fibres: Fundamental properties and device applications

The presence of wavelength-scale holes in the transverse profile of a holey fibre can lead to novel optical properties that cannot be achieved in more conventional forms of optical fibre. Examples of such properties include broadband single-mode guidance, the extremes of fibre nonlinearity, from fibres providing tight mode confinement to those offering large mode areas, and a range of remarkable dispersive properties, including broadband flattened dispersion, anomalous dispersion below 1.3 μm, and large normal dispersion values at 1.55 μm. Fundamentals and recent progress are reviewed, ranging from design and fabrication through to applications and devices based on this emerging fibre type. To cite this article: T.M. Monro, D.J. Richardson, C. R. Physique 4 (2003).     

Joint nonlinearity and chromatic dispersion pre-compensation for coherent optical orthogonal frequency-division multiplexing systems

This paper introduces a joint nonlinearity and chromatic dispersion pre-compensation method for coherent optical orthogonal frequency-division multiplexing systems. The research results show that this method can reduce the walk-off effect and can therefore equalize the nonlinear impairments effectively. Compared with the only other existing nonlinearity pre-compensation method, the joint nonlinearity and chromatic dispersion pre-compensation method is not only suitable for low-dispersion optical orthogonal frequency-division multiplexing system, but also effective for high-dispersion optical orthogonal frequency-division multiplexing transmission system with higher input power but without optical dispersion compensation. The suggested solution does not increase computation complexity compared with only nonlinearity pre-compensation method. For 40 Gbit/s coherent optical orthogonal frequency-division multiplexing 20×80 km standard single-mode fibre system, the suggested method can improve the nonlinear threshold (for Q > 10 dB) about 2.7, 1.2 and 1.0 dB, and the maximum Q factor about 1.2, 0.4 and 0.3 dB, for 2, 8 and 16 ps/(nm·km) dispersion coefficients.     

Fabrication of a range of SERS substrates on nanostructured multicore optical fibres

An effective method for producing arrays of nanoscale triangles, rods and wells on the distal end of a silica optical fibre is presented. The structures are produced by applying a wet‐etch procedure to drawn‐down imaging fibres. Structural variation is achieved by altering the final diameter of the drawn fibre. Feature sizes of less than 100 nm can be readily achieved in this way. When coated with silver, surface‐enhanced Raman scattering enhancement factors of over 10⁶ can be achieved, depending on the size and shape of the structures present. Copyright © 2006 John Wiley & Sons, Ltd.     

Dip-coated HNR120 photoresists thin-film optical waveguides

We report on our systematic and detailed study of fabrication and characterization of HNR120 photoresists thin-film optical waveguides. Various waveguide properties, such as refractive index, optical losses as a function of temperature, waveguide thickness, dispersion and birefringence have been studied. The optical loss are found to be <1.4 dB cm⁻¹.     

Semiconductor optical fibres: progress and opportunities

This paper reviews recent progress in the nascent field of semiconductor optical fibres, from the fundamentals through to device demonstration. The incorporation of semiconductor materials into both the step‐index and microstructured fibre geometries provides a route to introducing new optoelectronic functionality into existing glass fibre technologies. Herein, the various fabrication methods that have been developed as of to date are described, and their compatibility with the different semiconductor materials and fibre designs discussed. Results will be presented on the optical transmission properties of several fibre types, with particular attention being paid to the observation of nonlinear propagation in silicon core fibres. Finally, some speculation regarding the future prospects and applications of this new class of fibre will be provided.     

Fabrication and characterization of polyethylene terephatate optical waveguides

In this paper, the fabrication and characterization of polyethylene terephatate (PET) thin film integrated optical waveguide is presented. Dip-coating technique has been used to fabricate the optical waveguide using PET. Various waveguide properties, such as mode effective refractive index, optical loss, dispersion and waveguide thickness as a function of temperature of waveguides have been reported. The optical loss are found to be <1 dB cm^–1.     

Spectral-domain intermodal interference and the effect of a low-resolution spectrometer

Spectral-domain intermodal interference is analysed theoretically at the output of a few-mode optical fibre alone and at the output of the optical fibre in a tandem configuration with a Michelson interferometer. The theoretical analysis is performed under general measurement conditions when a broadband source and a low-resolution spectrometer of a Gaussian response function are considered and when the first- and second-order intermodal dispersion effects in the optical fibre are taken into account. The theoretical analysis is performed for two different examples of dispersion curves of a two-mode optical fibre and the effect of the limiting factors is specified.     

Exciting the optical response of nanowire metamaterial films on the tip of optical fibres

This Letter reports on the assembly on the tip of an optical fibre of a metamaterial film fabricated by a self‐assembly bottom‐up method, composed of silver nanowires embedded in an alumina matrix. By illuminating the film through the fibre in a reflection configuration, we observe experimentally the optical response of the metamaterial in agreement with theoretical predictions and interpreted as the excitation of surface plasmon‐polaritons in the cylindrical surface of the nanowires. These results pave the way for low‐cost optical fibre devices that incorporate metamaterial films.

     

全光纤光外差检测技术的研究

本文介绍了由普通单模光纤构成的全光纤光外差检测系统的基本原理和实验研究结果。在该系统中采用了自行研制设计的实现全光纤化的两个关键光纤元件：普通单模光纤频率偏移器和普通单模光纤偏振控制器，介绍了此两光纤元件的基本工作原理和设计方法。文章还给出了实际的全光纤外差检测系统，元器件的选用及实现光外差检测空间条件的光路调节方法。