Solubilization of various fluorocarbons in a fluorinated surfactant/water system: relation with the design of porous materials

We have investigated the phase behavior of the R(F)(7)(EO)(8) surfactant in water as well as the effect of the solubilization of various fluorocarbons in this system. Results show that the cloud point (CP) curve is shifted to high temperatures upon addition of fluorocarbons, following the sequence 1-bromo-perfluorooctane (PFOB) < perfluorodecalin (PFD) < perfluorooctane (PFO). The values of the phase inversion temperature (PIT) associated with these systems increase in the same order: PFOB approximately 65 degrees C, PFD approximately 82 degrees C, and PFO > 90 degrees C. Starting from these systems, we have prepared mesoporous and hierarchical porous materials. The formation of the ordered mesoporous materials has been related to the CP curve. Indeed, our results show that mesoporous materials with a high degree of ordering are obtained from systems whose CP curve is shifted toward high temperatures. We have also correlated the formation of the hierarchical porous silica to the PIT. It appears that the design of macro-mesoporous materials is favored with systems that exhibit a high value of the PIT.     

Oil-induced anomalous thermoresponsive viscoelasticity in fluorinated surfactant systems

We have studied the rheology and structure of a mixed nonionic fluorinated surfactant, perfluoroalkyl sulfonamide ethoxylate, C(8)F(17)SO(2)N(C(3)H(7))(CH(2)CH(2)O)(n)H abbreviated as C(8)F(17)EO(10), and perfluorodecalin (C(10)F(18)) or perfluoropolyether oil, (C(3)F(6)O)(n)COOH, in an aqueous system using rheometry and small-angle X-ray scattering (SAXS) techniques. In the absence of oil, the viscosity of surfactant solutions (10 and 15 wt %) first decreases slightly and then more strongly with temperature. Addition of a small amount of fluorinated oil to the wormlike micellar solution disrupts the network structure and decreases the viscosity sharply at lower temperature indicating a rod-sphere transition. The trend of the viscosity curve changes gradually and an anomalous viscosity maximum as a function of temperature appears. It is found that perfluoropolyether oil decreases the viscosity more effectively than perfluorodecalin. The generalized indirect Fourier transformation (GIFT) analysis of the SAXS data confirmed the formation of long rod-like particles in an oil-free, surfactant/water system at 20 degrees C. Addition of a trace amount of fluorinated oils induces modulation in the structure of the micelles and eventually short rods or spherical particles are formed. The decreasing trend in the viscosity with oil concentration is thus attributed to the microstructure changes induced by the added oils.     

Phase behavior and preparation of mesoporous silica in aqueous mixtures of fluorinated surfactant and hydrophobic fluorinated polymer

The phase behavior and formation of self-assemblies in the ternary water/fluorinated surfactant (C(8)F(17)EO(10))/hydrophobic fluorinated polymer (C(3)F(6)O)(n)COOH system and the application of those assemblies in the preparation of mesostructured silica have been investigated by means of phase study, small angle X-ray scattering, and rheology. Hexagonal (H(1)), bicontinuous cubic (V(1)) with Ia3d symmetry, and polymer rich lamellar (L(alpha)(')) are observed in the ternary diagram. C(8)F(17)EO(10) molecules are dissolved in polymer rich aggregates, whereas (C(3)F(6)O)(n)COOH molecules are practically insoluble in the surfactant lamellar phase due to packing restrictions. Hence, two types of lamellar phases exist: one with surfactant rich (L(alpha)) and the other with polymer rich (L(alpha)(')) in the water/C(8)F(17)EO(10)/(C(3)F(6)O)(n)COOH system. As suggested by rheological measurements, worm-like micelles are present in C(8)F(17)EO(10) aqueous solutions but a rod-sphere transition takes place by solubilization of (C(3)F(6)O)(n)COOH. C(8)F(17)EO(10) acts as a structure directing agent for the preparation of hexagonal mesoporous silica by the precipitation method. The addition of (C(3)F(6)O)(n)COOH induces the formation of larger but disordered pores.     

Mixed fluorinated-hydrogenated surfactant-based system: preparation of ordered mesoporous materials

We have investigated a mixed fluorinated-hydrogenated surfactant-based system [C8F17C2H4(OC2H4)9-C12H25(OC2H4)8] in water. The phase diagram exhibits that the micellar domain can be divided into three parts: above 80 wt% of water both hydrogenated and fluorinated surfactants are completely miscible and they formed mixed micelles in all proportion. When the water concentration is decreased from 80 to 60 wt% a gap of miscibility appears and two micellar zones, one fluorocarbon-rich micelles and one hydrocarbon-rich micelles are observed. The liquid crystal domain is composed of one fluorocarbon-rich (H(F)(1)) and one hydrocarbon-rich (H(H)(1)) hexagonal phase. The hydrophobic radius and the cross-sectional area remain constant in the H(H)(1) and in the H(F)(1) domains. Moreover, SAXS measurements proved that the hydrophobic chains in the liquid crystal phases adopt rather an extended conformation. Then the mixture of surfactants was used as template for the preparation of mesoporous materials. Mesostructured silicas with a well hexagonal array of their channels were prepared via a cooperative templating mechanism (CTM), if the loading of fluorinated surfactant is larger than 50%. Decreasing the proportion of the fluorinated amphiphile in the mixture leads to the formation of mesoporous silica with a disordered structure. In this case the channel arrangement is no longer governed by the fluorinated surfactant but by the hydrogenated one.     

Small-angle X-ray scattering (SAXS) study on nonionic fluorinated micelles in aqueous system

We have investigated the self-organization structures of perfluoroalkyl sulfonamide ethoxylate, C(8)F(17)SO(2)N(C(3)H(7))(CH(2)CH(2)O)(10)H, a nonionic fluorinated surfactant in aqueous system by small-angle X-ray scattering (SAXS) technique. Structural modulation of the nonionic fluorinated micelle induced by temperature change, surfactant concentration, and the added fluorinated oils have been systematically studied. The SAXS data were analyzed by the indirect Fourier transformation (IFT), and the generalized indirect Fourier transformation (GIFT) depending on the volume fraction of the surfactant. Various plausible classical model calculations have been performed to confirm the consistency of the GIFT analysis of the SAXS data. Upon successive increase in temperature, the cylindrical micelles formed at lower temperatures undergo a continuous one-dimensional growth and ultimately near the cloud point an indication of flat planar like structural pattern is observed. The evolution in structure of particle near the demixing temperature may be due to onset of attractive interactions. The shape and size of the micelle is apparently unaffected by changing the surfactant concentration from 1 to 5 wt% at 25 degrees C. Nevertheless, addition of small amount of perfluoropolyether (PFPE) oil, of structure F(CF(2)CF(2)CF(2)O)(n)CF(2)CF(2)COOH (n approximately 21) modulate the micellar shape and size. Long cylindrical micelles eventually transform into globular like particles. The onset cylinder-to-sphere transition in the structure of micelles in the surfactant/water/oil system is probably due to amphiphilic nature of the oil, which tends to increase the spontaneous curvature. The lipophilic part of the oil tends to reside in the micellar core, whereas, the hydrophilic part goes close to the polar head group of the surfactant so that effective cross-sectional area per surfactant molecules increases and as a result spherical micelles tend to form. Perfluorodecalin (PFD) also decreases size of the micelles but its effect is poor compared to the PFPE oil.     

Coexistence of two kinds of fluorinated hydrogenated micelles as building blocks for the design of bimodal mesoporous silica with two ordered mesopore networks

A simple and effective route has been developed for the synthesis of bimodal (3.6 and 9.4 nm) mesoporous silica materials that have two ordered interconnected pore networks. Mesostructures have been prepared through the self-assembly mechanism by using a mixture of polyoxyethylene fluoroalkyl ether and triblock copolymer as building blocks. The investigation of the R(F)(8)(EO)(9)/P123/water phase diagram shows that in the considered surfactant range of concentrations the system is micellar (L(1)). DLS measurements indicate that this micellar phase is composed of two types of micelles; the size of the first one at around 7.6 nm corresponds unambiguously to the pure fluorinated micelles. The second type of micelles at higher diameter consists of fluorinated micelles that have accommodated a weak fraction of P123 molecules. Thus, in this study the bimodal mesoporous silica is really templated by two kinds of micelles.     

Phase behavior of CO2-expanded fluorinated microemulsions

The formation of CO2-expanded, fluorinated reverse microemulsions is demonstrated for the system of perfluoropolyether (PFPE) surfactant (ClPFPE-NH4, MW = 632) and PFPE oil (PFPE, MW = 580). The phase behavior of this system is examined as a function of temperature (25-45 degrees C), pressure, CO2 concentration, and water to surfactant molar ratios (W0 = 10 and 20). Visual observations of one-phase behavior consistent with reverse microemulsion formation are further supported by spectroscopic measurements that establish the existence of a bulk water environment within the aqueous core. Microemulsion formation is not observed in the absence of CO2 for this PFPE surfactant/PFPE oil system, and a CO2 content greater than 70 mol % is required to induce microemulsion formation. Over the range of water loadings and temperatures investigated, the lowest cloud point pressure is observed at 46 bar (5 wt % ClPFPE-NH4 in PFPE oil, W0 = 20, xCO2 = 0.7, T = 25 degrees C). In the regions where one-phase behavior is observed, the cloud point pressures increase with temperature, water loadings, and CO2 content. The driving forces of microemulsion formation in the CO2-expanded fluorinated solvent are discussed relative to traditional reverse microemulsions and CO2-continuous microemulsions.     

Design of ordered bimodal mesoporous silica materials by using a mixed fluorinated-hydrogenated surfactant-based system

Mesoporous silica materials have been prepared using aqueous solutions of hydrogenated-fluorinated surfactant mixtures. The phase behavior of the C18H35(OC2H4)10-C6F15C2H4(OC2H4)11OH [RH18(EO)10-RF6(EO)11] mixture in aqueous solution was first established at the temperature at which the silica source is added, i.e., 20 or 40 degrees C. We have delimited the different phase domains. Concerning the mesostructured silica, whatever the temperature at which the silica source is added, mesoporous material with a hexagonal array of their channel is formed via a cooperative templating mechanism (CTM), if the content of RF6(EO)11 in the surfactant mixture is lower than 50%. Moreover, when the silica source is added at 40 degrees C, the recovered materials exhibit a bimodal pore size distribution. The appearance of this bimodality has been related to the coexistence of hydrogenated micelles with fluorinated wormlike micelles. By contrast, the bimodality is not observed when the silica source is added at 20 degrees C.     

Nonionic fluorinated-hydrogenated surfactants for the design of mesoporous silica materials

We have investigated the influence of the ratio between the volume of the hydrophilic head ( V A) and the volume of the hydrophobic part ( V B) of the surfactant on the mesopore ordering. To understand the difference of behavior we have performed a complete study dealing with fluorinated [R m (F)(EO) n ] and hydrogenated [R m (H)(EO) n ] surfactants. Their mixtures have also been taken into account. Here only the phase diagrams and the structural parameters of the liquid crystal phases of the mixed systems are reported. We have shown that the mutual or partial miscibility of the fluorinated and the hydrogenated surfactants depends on the number of oxyethylene units of each surfactant. To follow, various systems were used for the preparation of silica mesoporous materials via a cooperative templating mechanism (CTM). Results clearly reveal that V A/ V B ratios in the range between 0.95 and 1.78 lead to the formation of well-ordered mesostructures. Wormhole-like structures are obtained for higher or lower values. Moreover, results show that from the V A/ V B point of view, polyoxyethylene fluoroalkyl ether surfactants behave like their hydrogenated analogues.     

Design and synthesis of ordered mesoporous silica materials with high degree of silica condensation at high temperature from a mixture of polymer surfactant with small organic ammonium

Thermal stability on a mixture of triblock polymer (P123) and fluorocarbon surfactant (FC-4) in acidic media for synthesis of ordered mesoporous materials has been carefully investigated by NMR spectroscopy at various treated temperatures (RT-180 degrees C) and the templating mechanism of the mixture on high-temperature synthesis has been proposed. Accordingly, we have designed fluorocarbon-free templates for syntheses of ordered mesoporous silica materials at high temperatures. As expected, ordered mesoporous silica materials with high degree of silica condensation are synthesized at high temperatures from these designed templates.     

Nonionic fluorinated surfactant: investigation of phase diagram and preparation of ordered mesoporous materials

The behavior of fluorinated surfactant F(CF2)8C2H4(OC2H4)9OH in water solution was investigated, and the preparation ofmesoporous molecular sieves was achieved. A direct micellar phase (L1) and a hexagonal (H1) liquid crystal were found. Small-angle X-ray scattering measurements proved that the hydrophobic chains are completely extended and that the cross sectional area remains constant in H1. At 80 degrees C, materials with a hexagonal array of their channel are prepared via a cooperative templating type mechanism in a wide range of surfactant concentrations (5-20 wt %). Decreasing the hydrothermal temperature leads to the formation ofwormhole-like structure. In this case the channel arrangement is no longer governed by the surfactant behavior but by the silica condensation and polymerization. An increase of the mean pore diameter with heating temperature is noted. This result is associated with changes of aggregation number with temperature. A comparison of the characteristics of the materials obtained with both hydrogenated and fluorinated surfactants is also made.     

Poly(ethylene oxide)-based surfactants as templates for the synthesis of mesoporous silica materials

Various mesoporous silica solids were prepared by using poly(ethylene oxide)-based surfactants as templates in a neutral, fluoride, or moderately acidic medium, and their properties examined by different physical techniques. Precipitation in an acid or neutral medium provided materials of pore size in between those of micropores and mesopores irrespective of the molecular size of the surfactant. On the other hand, syntheses in a fluoride-containing medium yielded mesoporous materials with pore diameters over the range 36-84 A that increased with increasing surfactant size. All materials possessed specific surface areas above 650 m(2)g(-1) and high pore volumes-particularly those obtained in a fluorinated medium. The conditions used in the syntheses and the fact that all produced highly disordered porous materials suggest that their mechanism of formation is essentially of the N(0)I(0) neutral type. The materials obtained in the presence of fluoride ion, which promote the condensation of siliceous species, retain greater amounts of surfactant and exhibit increased cross-linking and decreased particle sizes, which results in textural mesoporosity.     

非离子表面活性剂的雾点研究-电解质的影响

研究了１－１型钠盐对五种非 离子表面活性剂水溶液雾点的影响，有九种钠盐使雾点下降，下降的依次是ＩＯ＾－３＞ＯＨ＾－＞Ｆ＾－＞ＣＨ３ＣＯＯ＾－＞ＢｒＯ＾－３＜＞Ｃｌ＾－＞Ｂｒ＾＿＞ＣｌＯ３＾－≥ＮＯ＾－３；有三种钠盐使雾点升高，升高的效率依次是ＣＮＳ＾－＞ＣｌＯ＾－＞Ｉ＾－。     

Probing the impact of advanced melting and advanced adsorption phenomena on the accuracy of pore size distributions from cryoporometry and adsorption using NMR relaxometry and diffusometry

The penetration of compressed CO(2) in hydrocarbon and fluorocarbon regions of concentrated surfactant mesophases are interpreted from differences in the CO(2)-processed pore expansion of mesoporous silica thin films templated by three surfactants containing varying degrees of hydrocarbon and fluorocarbon functionality. Ordered silica thin films are synthesized for the first time using the 16-carbon (C(16)) partly fluorinated surfactant, 11,11,12,12,13,13,14,14,15,15,16,16,16-tridecafluorocetyl pyridinium bromide (HFCPB), as a templating agent. Silica films templated with surfactants containing a 8-carbon (C(8)) fluorocarbon tail (3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl pyridinium chloride (HFOPC)) and a 16-carbon (C(16)) hydrocarbon tail (cetyl pyridinium bromide (CPB)) and HFCPB (C(16)) are processed in compressed CO(2) (69-172 bar, 25 °C and 45 °C) during synthesis. CO(2) processing results in significant pore expansion for films templated with both fluorinated surfactants, while pore expansion is negligible for the hydrocarbon templated material suggesting that preferential CO(2) penetration occurs in the 'CO(2)-philic' fluorocarbon segments of the surfactant template. The effect of substrate surface energy on the final uniformity of the dip-coated films is studied by varying the substrate from unmodified glass to a fluorocarbon-capped substrate. The ability to create dip-coated thin films on low surface energy substrates through favorable interaction of surfactant template tail with the substrate surface functional groups is demonstrated.     

Synthesis of thermally stable zirconia-based mesoporous materials via a facile post-treatment

A novel method of preparing thermally stable zirconia-based mesoporous materials was developed. The zirconia-based mesoporous materials of 2D-hexagonal structure were prepared using zirconium sulfate as the zirconium precursor and cetyltrimethylammonium (CTMA) as the pore-directing agent with the aid of salt in the synthesis solution to reduce the sulfate content in the final product and significantly improve the crystallographic ordering. Post-treatment of the mesoporous material with NaCl solution and lowering the ramping rate to less than 0.2 degrees C/min during the calcination process, however, were the key steps to hinder the growth of the dense zirconia phase and to retain the ordered mesostructure up to 600 degrees C. It was found that a portion of the surfactant (8.9-17.4 wt %) and sulfate ions (0.5-1.2 wt %) were removed during the post-treatment, which prevented the remaining sulfate groups from being reduced by the hydrogen-rich surfactant during the calcination process as confirmed by sulfur K-edge X-ray absorption near edge structure (XANES) and infrared spectroscopy. The maintenance of sulfur in the sulfate state seemed to be important in stabilizing the mesoporous structure of zirconia materials. The mesoporous zirconia materials after extraction with NaCl solution three times and calcination at 550-600 degrees C had the composition ZrO(2-x)(SO4)x with x = 0.10-0.27. The material possesses high surface area (approximately 200 m2/g), large pore volume (approximately 0.10 cm3/g), and wormlike mesopores. In comparison with the mesoporous zirconia materials stabilized by chemical treatment, the present route was simpler and more environmentally friendly and resulted in mesoporous zirconia materials of better thermal stability.     

Phase behavior of water-in-supercritical carbon dioxide microemulsion with sodium salt of bis(2,2,3,3,4,4,5,5-octafluoro-1-pentanol) sulfosuccinate

The fluorinated analogues of AOT surfactant, sodium salt of bis(2,2,3,3,4,4,5,5-octafluoro-1-pentanol) sulfosuccinate, which has CO₂-philic chains and a hydrophilic head group, was synthesized for forming water-in-CO₂ microemulsion. The cloud point of this surfactant was measured and the supercritical fluid-phase behavior of water-in-CO₂ microemulsion was investigated by using a variable-volume view cell apparatus. It was found that the phase behavior of microemulsion is affected by the concentrations of water and surfactant in CO₂, molar ratio of water to surfactant (W_o = [water]/[surfactant]), and the amount of CO₂. From this experiment, we found out another cloudy point which exists above the homogeneous microemulsion region. We defined this point as “upper cloud point” and general cloud point as “lower cloud point. The region which exists between these two cloud points was defined as “stable region of microemulsion”. Conditions for the formation of water-in-CO₂ microemulsion were obtained at temperatures up to 370.15 K.     

Effects of additives on the cloud points of selected nonionic linear ethoxylated alcohol surfactants

Effects of various additives including inorganic salts, nonionic and ionic surfactants, water-soluble polymers and alcohols on the cloud points of three linear nonionic surfactants, Tergitol 15-S-7, Tergitol 15-S-9 and Neodol 25-7, were investigated. These surfactants are readily biodegradable and either linear primary or secondary ethoxylated alcohols. Cloud points of these surfactants were functions of their concentrations and concentrations of additives. The cloud points of nonionic surfactant mixtures lay in between the cloud points of individual component surfactants. Presence of two ionic surfactants, sodium dodecyl sulfate (SDS) and cetyl trimethyl ammonium bromide (CTAB), increased the cloud point of 1 wt% Tergitol 15-S-7 micellar solution dramatically when concentrations of ionic surfactants approaching their critical micelle concentration. Addition of water-soluble polymers decreased the cloud point, while addition of inorganic salts can either increase or decrease the cloud points. However, the effect of an alcohol additive on cloud point was dependent on its chain length or its water solubility. Interestingly, synergistic effects between sulfate or phosphate and pentanol on depression of cloud points of Tergitol 15-S-9 were discovered. A linear model predicting cloud points of Tergitol 15-S-X (X = 7, 9 and 12) surfactants and Neodol 25-X (X = 7, 9 and 12) surfactants were proposed with a correlation to logarithm of their ethylene oxide numbers.     

Interaction of Fluorocarbon Containing Hydrophobically Modified Polyelectrolyte with Nonionic Surfactants

ＩｎｔｒｏｄｕｃｔｉｏｎＷａｔｅｒ ｓｏｌｕｂｌｅｐｏｌｙｍｅｒｓｈａｖｅｇａｉｎｅｄｃｏｎｓｉｄｅｒａｂｌｅａｔ ｔｅｎｔｉｏｎｉｎｔｈｅｐａｓｔｄｅｃａｄｅｓｂｅｃａｕｓｅｏｆｔｈｅｉｒｗｉｄｅｌｙｉｎｄｕｓ ｔｒｉａｌａｐｐｌｉｃａｔｉｏｎｓａｎｄｆｒｉｅｎｄｌｉｎｅｓｓｔｏｅｎｖｉｒｏｎｍｅｎｔ .1 3Ｅｓｐｅ ｃｉａｌｌｙｈｙｄｒｏｐｈｏｂｉｃａｌｌｙｍｏｄｉｆｉｅｄｗａｔｅｒ ｓｏｌｕｂｌｅｐｏｌｙｍｅｒｓ(ＨＭＷＳＰ)ｗｈｉｃｈｂｅａｒａｓｍａｌｌａｍｏｕｎｔｏｆｈｙｄｒｏｐｈｏｂｅｓｏｎｔ…     

Influence of a hydrophobic diol on the micellar transitions of Pluronic P85 in aqueous solution

Micellization behavior of an amphiphilic ethylene oxide-propylene oxide-ethylene oxide tri-block copolymer Pluronic P85 [(EO)(26)(PO)(39)-(EO)(26)] in aqueous solution and in the presence of a hydrophobic C(14)diol (also known as Surfynol104) was examined by physico-chemical methods such as viscometry, cloud point (CP) and scattering techniques viz. dynamic light scattering (DLS) and small angle neutron scattering (SANS). The addition of diol decreases the cloud point and gelation temperature of aqueous Pluronic P85 copolymer solution. DLS and SANS measurements of the polymer in aqueous solution indicated micellar growth and sphere to rod transition in the presence of diol. Surfynol 104 is a sparingly water soluble diol surfactant with a solubility of approximately 0.1 wt%. However, up on addition to Pluronic solution, diol gets incorporated in the block copolymer micelles and leads to structural transition of the micelles. An increase in the temperature and the presence of added sodium chloride in the solution further enhances this effect. The addition of hydrophobic C(14)diol increases the hydrodynamic size and aggregation numbers of the micellar system. The micellar parameters for the copolymer in the presence of C(14)diol are reported at different temperatures and added sodium chloride concentrations.     

Nonionic surfactant and temperature effects on the viscosity of hydrophobically modified hydroxyethyl cellulose solutions

Nonionic surfactant and temperature effects on the viscosity of hydrophobically modified hydroxyethyl cellulose (HMHEC) solutions are investigated experimentally. Weak shear thickening at intermediate shear rates takes place for HMHEC at moderate concentrations and becomes more significant at lower temperatures. While this amphiphilic polymer in surfactant-free solution does not turn turbid by heating to 95 degrees C, its mixture with nonionic surfactant shows a lower cloud point temperature than does a pure surfactant solution. For some mixture cases, phase separation takes place at temperatures as low as 2 degrees C. The drop of cloud point temperature is attributed to an additional attractive interaction between mixed micelles via chain bridging. With increasing temperature, the viscosity of an HMHEC-surfactant mixture in aqueous solution first decreases but then rises considerably until around the cloud point. The observed viscosity increase can be explained by the interchain association because of micellar aggregation.