Structural and physical properties evolution in the 6H BaRu1−xMnxO3 synthesized under high pressure

The 6H BaRu_1−xMn_xO₃ with the hexagonal BaTiO₃ structure was synthesized using high-pressure sintering method. It is found that the lattice parameter deviates from Vegard's law at x=0.3 for the solid solutions due to the charge transfer effects at B-site. The substitution of Mn for Ru cations gives rise to the short-range magnetic ordering, due to the disordered arrangement of Ru and Mn cations. The compounds are weak ferromagnetic in the x range 0.05-0.40, with the maximal Curie temperature T_c 175.2 K at x=0.10. They are of spin-glass-like magnetism at lower temperature at x?0.1. With Mn doping, the 6H BaRuO₃ transforms to a semiconductor from the primal metal at x=0.30. The resistance as a function of temperature below about 70 K follows the two-dimensional variable-range hopping conduction mechanism in BaRu_0.50Mn_0.50O₃.     

Structural and physical properties evolution of BaIr1−xMnxO3 solid solutions synthesized by high-pressure sintering

The BaIr_1−xMn_xO₃ (0.0≤x≤1.0) solid solutions were synthesized by using the solid-state chemical method and high pressure sintering in the pressure range 0-5 GPa. According to the pressure-composition “phase diagram” at 1000 °C, the 9M BaIr_1−xMn_xO₃ transforms to the 6M form at 5 GPa and x≤1/6. In the x range 0.5-1.0, it transforms to the 9R form in a large pressure range. For the 9M BaIrO₃, the Mn ions substitution for Ir ions enhances the semiconducting property, and reduces the weak ferromagnetism. When x is larger than 1/3, the 9M/9R BaIr_1−xMn_xO₃ behave spin-glass-like state at low temperature, with the glass transition temperature T_g about 60 K. For the 6M BaIrO₃, the Mn ions doping results in that it transforms to insulator and spin-glass-like magnetism from the initial paramagnetic metal.     

A structural study of the perovskite series Ca1−xNaxTi1−xTaxO3

Compounds in the solid solution series Ca_1−xNa_xTi_1−xTa_xO₃ were synthesized at 1300 °C, followed by annealing at 850 °C or 800 °C with quenching and/or slow cooling to room temperature. Rietveld refinement of their powder X-ray diffraction patterns show that all compounds are single-phase ternary perovskites which adopt the space group Pbnm (a≈b≈√2a_p; c≈2a_p; Z=4) at ambient conditions. The unit cell parameters and cell volumes of the compounds increase regularly with increasing values of x. The coordination of the A-site cations changes throughout the series from eight for CaTiO₃ to nine for NaTaO₃. Compounds with 0?x ?0.4 have A-site cations in eight fold coordination, whereas the coordination of those with 0.4<x<0.9 is ambiguous. Analysis of the crystal chemistry of the compounds shows that the change in coordination at x=0.4 is related to the departure of the B-site cations from the second coordination sphere of the A-site cations, as in compounds with x>0.4 the A-^IIO distances become less than the A-B intercation distances. Contemporaneous with these coordination changes, the tilt angles of the BO₆ polyhedra decrease with increasing values of x. This solid solution series is unusual in that these structural and coordination changes occur regardless that Goldschmidt tolerance factors remain essentially constant at approximately 0.89, and observed tolerance factors, assuming eight fold coordination of the A-site cations, range only from 0.91 to 0.93 (0?x?0.8).     

Crystal structures and magnetic properties of two-dimensional antiferromagnets Co1−xZnxTeMoO6

Crystal structures and magnetic properties of metal telluromolybdates Co_1−xZn_xTeMoO₆ (x=0.0, 0.1,…,0.9) are reported. All the compounds have an orthorhombic structure with space group P2₁2₁2 and a charge configuration of M²⁺Te⁴⁺Mo⁶⁺O₆. In this structure, M ions form a pseudo-two-dimensional lattice in the ab plane. Their magnetic susceptibility measurements have been performed in the temperature range between 1.8 and 300 K. The end member CoTeMoO₆ shows a magnetic transition at 24.4 K. The transition temperature for solid solutions rapidly decreases with increasing x and this transition disappears between x=0.4 and 0.5, which is corresponding to the percolation limit for the square-planer lattice. From the magnetization, specific heat, and powder neutron diffraction measurements, it is found that the magnetic transition observed in the CoTeMoO₆ is a canted antiferromagnetic ordering of Co²⁺ ions. The antiferromagnetic component of the ordered magnetic moment (3.12(3)μ_B at 10 K) is along the b-axis. In addition, there exists a small ferromagnetic component (0.28(3)μ_B) along the a-axis.     

Electron doping effect on structural and magnetic phase transitions in Sr2−xNdxFeMoO6 double perovskites

Polycrystalline Sr_2−xNd_xFeMoO₆ (x=0.0, 0.1, 0.2, 0.4) materials have been synthesized by a citrate co-precipitation method and studied by neutron powder diffraction (NPD) and magnetization measurements. Rietveld analysis of the temperature-dependent NPD data shows that the compounds (x=0.0, 0.1, 0.2) crystallize in the tetragonal symmetry in the range 10-400 K and converts to cubic symmetry above 450 K. The unit cell volume increases with increasing Nd³⁺ concentration, which is an electronic effect in order to change the valence state of the B-site cations. Antisite defects at the Fe-Mo sublattice increases with the Nd³⁺ doping. The Curie temperature was increased from 430 K for x=0 to 443 K for x=0.4. The magnetic moment of the Fe-site decreases while the Mo-site moment increases with electron doping. The antiferromagnetic arrangement causes the system to show a net ferrimagnetic moment.     

Synthesis and electrical conductivity of perovskite-type PrCo1−xMgxO3

Oxides in the system PrCo_1−xMg_xO₃ (x=0.0, 0.05, 0.10, 0.15, 0.20, 0.25) were synthesized by citrate technique and characterized by powder X-ray diffraction and scanning electron microscope. All compounds have a cubic perovskite structure (space group ). The maximum ratio of doped Mg in the system PrCo_1−xMg_xO₃ is x=0.2. Further doping leads to the segregation of Pr₆O₁₁ in PrCo_1−xMg_xO₃. The substitution of Mg for Co improves the performance of PrCoO₃ as compared to the electrical conductivity measured by a four-probe electrical conductivity analyzer in the temperature range from 298 to 1073 K. The substitution of Mg for Co on the B site may be compensated by the formations of Co⁴⁺ and oxygen vacancies. The electrical conductivity of PrCo_1−xMg_xO₃ oxides increases with increasing x in the range of 0.0-0.2. The increase in conductivity becomes considerable at the temperatures ?673 K especially for x?0.1; it reaches a maximum at x=0.2 and 1073 K. From x>0.2 the conductivity of PrCo_1−xMg_xO₃ starts getting lower. This is probably a result of the segregation of Pr₆O₁₁ in PrCo_1−xMg_xO₃ , which blocks oxygen transport, and association of oxygen vacancies. A change in activation energy for all PrCo_1−xMg_xO₃ compounds (x=0-0.25) was observed, with a higher activation energy above 573 K and a lower activation energy below 573 K. The reasons for such a change are probably due to the change of dominant charge carriers from Co⁴⁺ to Vö in PrCo_1−xMg_xO₃ oxides and a phase transition mainly starting at 573 K.     

Synthesis and properties of the Co7Se8−xSx and Ni7Se8−xSx solid solutions

We report the synthesis and elementary properties of the Co₇Se_8−xS_x (x=0-8) and Ni₇Se_8−xS_x (x=0-7) solid solutions. Both systems form a NiAs-type structure with metal vacancies. In general, the lattice parameters decrease with increasing x, but in the Ni₇Se_8−xS_x system c increases on going from x=5 to 7. Magnetic susceptibility measurements show that all samples exhibit temperature-independent paramagnetism from 25-250 K. Samples within the Co₇Se_8−xS_x system, as well as Ni₇Se₈ and Ni₇SeS₇, were found to be poor metals with resistivities of ∼0.20 and ∼0.06 mΩ cm at 300 K, respectively. The Sommerfeld constant (γ) was determined from specific heat measurements to be ∼13 mJ/mol_CoK² and ∼7 mJ/mol_NiK² for Co₇Se_8−xS_x and Ni₇Se_8−xS_x, respectively.     

Solid solubility and phase transitions in the system LaNb1−xTaxo4

The solid solubility between LaNbO₄ and LaTaO₄ was investigated by X-ray diffraction, and a two-phase region was observed in the composition region LaNb_1−xTa_xO₄ where 0.4?x?0.8. Single-phase LaNb_1−xTa_xO₄ (0?x?0.4) with the monoclinic Fergusonite structure at ambient temperature, was observed to transform to a tetragonal Scheelite structure by in-situ high-temperature X-ray diffraction, and the phase transition temperature was shown to increase with increasing Ta-content. This ferroelastic to paraelastic second-order phase transition was described by Landau theory using spontaneous strain as an order parameter. The thermal expansion of LaNb_1−xTa_xO₄ (0?x0.4) was shown to be significantly higher below the phase transition than above. Single-phase LaNb_1−xTa_xO₄ (0.8?x?1) with another monoclinic crystal structure at ambient temperature was shown to transform to an orthorhombic crystal structure by X-ray diffraction and differential scanning calorimetry. The phase transition temperature was observed to decrease with decreasing Ta-content. Finally, orthorhombic LaTaO₄ could also be transformed to monoclinic LaTaO₄ at ambient temperature by applying a uniaxial pressure of 150-170 MPa, reflecting the lower molar volume of monoclinic LaTaO₄.     

Evolution of structure and magnetic properties in electron-doped double perovskites, Sr2−xLaxMnWO6 (0?x?1)

Powder neutron and X-ray diffraction studies show that the double perovskites in the region 0?x?1 exhibit two crystallographic modifications at room temperature: monoclinic P2₁/n and tetragonal I4/m, with a boundary at 0.75<x<0.9. Magnetic susceptibility measurements indicate that for x=0 and 0.5 Sr_2−xLa_xMnWO₆ orders antiferromagnetically (AFM) at 15 and 25 K, respectively, for 0.75?x<1.0, a contribution of weak ferromagnetism (FM), probably due to canted-AFM order, increases with increasing x. The end point compound SrLaMnWO₆ shows the strongest FM cluster effect; however, no clear evidence of magnetic order is discernable down to 4.2 K. X-ray absorption spectroscopy (XAS) confirms Mn²⁺ and mixed-valent W^6+/5+ formal oxidation states in Sr_2−xLa_xMnWO₆.     

Thermoelectric properties of Ag-doped n-type (Bi2Te3)0.9-(Bi2−xAgxSe3)0.1 (x=0-0.4) alloys prepared by spark plasma sintering

Ag-doped n-type (Bi₂Te₃)_0.9-(Bi_2−xAg_xSe₃)_0.1 (x=0-0.4) alloys were prepared by spark plasma sintering and their physical properties evaluated. When at low Ag content (x=0.05), the temperature dependence of the lattice thermal conductivity follows the trend of (Bi₂Te₃)_0.9-(Bi₂Se₃)_0.1; while at higher Ag content, a relatively rapid reduction above 400 K can be observed due possibly to the enhancement of scattering of phonons by the increased defects. The Seebeck coefficient increases with Ag content, with some loss of electrical conductivity, but the maximum dimensionless figure of merit ZT can be obtained to be 0.86 for the alloy with x=0.4 at 505 K, about 0.2 higher than that of the alloy (Bi₂Te₃)_0.9-(Bi₂Se₃)_0.1 without Ag-doping.     

The nature of the orthorhombic to tetragonal phase transition in Sr1−xCaxMnO3

The orthorhombic-tetragonal phase transition in the perovskite series Sr_1−xCa_xMnO₃ 0.4?x?0.6 has been studied by synchrotron X-ray powder diffraction. At room temperature the Ca rich oxides x?0.45 have the orthorhombic Pbnm superstructure whereas Sr_0.6Ca_0.4MnO₃ is two phases with both tetragonal I4/mcm and orthorhombic Pbnm. Analysis of the octahedral tilts suggest the co-existence of these two phases is a consequence of a first-order I4/mcm to Pbnm transition. The evolution of the structure of Sr_0.5Ca_0.5MnO₃ with temperature is also described and this is found to evolve from orthorhombic to tetragonal and ultimately cubic.     

Effect of composition on structural and magnetic properties of nanocrystalline Ni0.8−xZn0.2MgxFe2O4 ferrite

Nanocrystalline magnetic particles of Ni_0.8−xZn_0.2Mg_xFe₂O₄ ferrites with x lying between 0.0 and 0.8 were synthesized using metal nitrates and freshly extracted egg-white. The synthesized powders were characterized using X-ray diffraction (XRD), Fourier transform infrared (FT-IR) and transmission electron microscopy (TEM). With increasing magnesium concentration, the lattice constant increases while X-ray density decreases. The average crystallite size determined from XRD data using Scherrer formula lie in the range of 35–59 nm. TEM image shows spherically agglomerated particles with average crystallite size agreed well with that obtained from XRD. Magnetic properties measured at room temperature by vibrating sample magnetometer (VSM) reveal a decrease in saturation magnetization up to Mg content of 0.6. In agreement with FT-IR results, the unexpected increase in the magnetization at Mg content of 0.8 can be attributed to the tendency of Mg²⁺ ions to occupy the tetrahedral site. The decrease in the value of coercivity with increasing magnesium content can be explained based on the magneto-crystalline anisotropy.     

Charge compensation and oxidation in NaxCoO2−δ and LixCoO2−δ studied by XANES

A comparative study on the oxidation and charge compensation in the A_xCoO_2−δ systems, A=Na (x=0.75, 0.47, 0.36, 0.12) and Li (x=1, 0.49, 0.05), using X-ray absorption spectroscopy at O 1s and Co 2p edges is reported. Both the O 1s and Co 2p XANES results show that upon removal of alkali metal from A_xCoO_2−δ the valence of cobalt increases more in Li_xCoO_2−δ than in Na_xCoO_2−δ. In addition, the data of O 1s XANES indicate that charge compensation by oxygen is more pronounced in Na_xCoO_2−δ than in Li_xCoO_2−δ.     

Probing the local structure of crystalline ZITO: In2−2xSnxZnxO3 (x≤0.4)

The local structure of In₂O₃ cosubstituted with Zn and Sn (In_2−2xSn_xZn_xO₃, x≤0.4 or ZITO) was determined by extended X-ray absorption fine structure (EXAFS) for x=0.1, 0.2, 0.3 and 0.4. The host bixbyite In₂O₃ structure is maintained up to the enhanced substitution limit (x=0.4). The EXAFS spectra are consistent with random substitution of In by the smaller Zn and Sn cations, a result that is consistent with the “good-to-excellent” conductivities reported for ZITO.     

Local environment in Ba2In2−xWxO5+3x/2 oxide ion conductors

The actual oxygen environment of the tungsten dopant in the Ba₂In_2−xW_xO_5+3x/2 solid solution was revealed by combining X-ray absorption spectroscopy at the tungsten L_I and L_III edges and at the indium L_I edge. Whatever the substitution ratio, the tungsten atoms exhibit a regular octahedral environment. When the substitution ratio increases, the oxygen vacancies are progressively filled until their total occupancy for x=2/3. For x?0.3, the perovskite structure is stabilised; the tungsten atoms are randomly distributed in the structure. Although X-ray diffraction revealed a cubic symmetry for these compositions, a local distortion of the indium environment is observed when a tungsten atom is in its surrounding.     

Synthesis and characterization of metal substituted AlxCr1−x(acetylacetonate)3 single-source precursors for their application to MOCVD of thin films

A detailed study, involving the synthesis of a single-source precursor containing two metal ions sharing the same crystallographic site, has been undertaken to elucidate the use of such a single-source precursor in a CVD process for growing thin films of oxides comprising these two metals, ensuring a uniform composition and distribution of metal ions. The substituted complexes Cr_1−xAl_x(acac)₃, where acac = acetylacetonate, have been prepared by a co-synthesis method, and characterized using UV–Vis spectroscopy, TGA/DTA measurements, and single crystal X-ray diffraction at low temperature. All the studied compositions crystallize in the monoclinic space group P2₁/c with Z = 4 in the unit cell. It was observed that the ratio (Al:Cr) of the site occupancy for the metal ions, obtained from single crystal refinement, is in agreement with the results obtained from complexometric titrations. All the solid state structures have the metal in an octahedral environment forming six-membered chelate rings. M–O acac bond lengths and disorder in the terminal carbon have been studied in detail for these substituted metal–organic complexes. One composition among these was chosen to evaluate their suitability as a single-source precursor in a LPMOCVD process (low-pressure metal–organic chemical vapour deposition) for the deposition of a substituted binary metal oxide thin film. The resulting thin films were characterized by X-ray diffraction, scanning electron microscopy, and infrared spectroscopy.     

Superstructure of hollandite KxMg(8+x)/3Sb(16−x)/3O16 (x≈1.76)

Single crystals of K_xMg_(8+x)/3Sb_(16−x)/3O₁₆ (x≈1.76) with a hollandite superstructure were grown. Ordering schemes for guest ions (K) and the host structure were confirmed by the structure refinement using X-ray diffraction intensities. The space group is I4/m and cell parameters are a=10.3256(6), c=9.2526(17)Å with Z=3. Superlattice formation is primarily attributed to the Mg/Sb occupational modulation in the host structure. Mg/Sb ratios at two nonequivalent metal sites are 0.8977/0.1023 and 0.1612/0.8388. Two types of the cavity are seen in the tunnel, where parts of K ions deviate from the cavity center along the tunnel direction. Probability densities for K ions in the two cavities are different from each other, which seems to have arisen from the Mg/Sb modulation.     

Crystal structure, microstructure and reducibility of LaNixCo1−xO3 and LaFexCo1−xO3 Perovskites (0<x≤0.5)

Nickel and iron substituted LaCoO₃ with rhombohedrally distorted perovskite structure were obtained in the temperature range of 600-900 °C by thermal decomposition of freeze-dried citrates and by the Pechini method. The crystal structure, morphology and defective structure of LaCo_1−xNi_xO₃ and LaCo_1−xFe_xO₃ were characterized by X-ray diffraction and neutron powder diffraction, TEM and SEM analyses and electron paramagnetic resonance spectroscopy. The reducibility was tested by temperature programmed reduction with hydrogen. The products of the partial and complete reduction were determined by ex-situ XRD experiments. The replacement of Co by Ni and Fe led to lattice expansion of the perovskite structure. For perovskites annealed at 900 °C, there was a random Ni, Fe and Co distribution. The morphology of the perovskites does not depend on the Ni and Fe content, nor does it depend on the type of the precursor used. LaCo_1−xNi_xO₃ perovskites (x>0.1) annealed at 900 °C are reduced to Co/Ni transition metal and La₂O₃ via the formation of oxygen deficient Brownmillerite-type compositions. For LaCo_1−xNi_xO₃ annealed at 600 °C, Co/Ni metal, in addition to oxygen-deficient perovskites, was formed as an intermediate product at the initial stage of the reduction. The interaction of LaCo_1−xFe_xO₃ with H₂ occurs by reduction of Co³⁺ to Co²⁺ prior to the Fe³⁺ ions. The reducibility of Fe-substituted perovskites is less sensitive towards the synthesis procedure in comparison with that of Ni substituted perovskites.     

Enhancement of magnetic ordering temperature in iron substituted ytterbium manganate (YbMn1−xFexO3)

Oxides of the type YbMn_1−xFe_xO₃; x≤0.3 showing multiferroic behavior have been synthesized by the solid state route. These oxides crystallize in the hexagonal structure known for the parent YbMnO₃ with the c/a ratio increasing with Fe substitution. The distortion of the MnO₅ polyhedra (tbp) decreases and the Mn-O-Mn bonds in the a-b plane become shorter with Fe-substitution. Magnetic ordering is observed from the low temperature neutron diffraction study. The compounds were found to be antiferromagnetic and the ordering temperature T_N increased from 82 K for pure YbMnO₃ to 95 K for YbMn_0.7Fe_0.3O₃. Variable temperature dielectric measurements (15-110 K) show an anomaly in the dielectric constant at temperatures close to the antiferromagnetic ordering temperature for all the compositions, showing a unique correlation between the magnetic and electric field. The increase in the ordering temperature in YbMn_1−xFe_xO₃ is explained on the basis of increase in covalence of Mn/Fe-O-Mn/Fe bonds (shorter) with iron substitution.     

Structural characterization, magnetic behavior and high-resolution EELS study of new perovskites Sr2Ru2−xCoxO6−δ (0.5?x?1.5)

New oxides of general formula Sr₂Ru_2−xCo_xO_6−δ (0.5?x?1.5) have been synthesized as polycrystalline materials and characterized structurally by X-ray diffraction. For 0.5?x<0.67 the orthorhombic, Pnma, perovskite structure of the end member, SrRuO₃, is found. At x=0.67 a phase separation into an Ru-rich Pnma phase and a Co-rich I2/c phase occurs. The I2/c form is also found for x=1.0 but another orthorhombic phase, Imma, obtains for x=1.33 and 1.5. Reductive weight losses indicate negligible oxygen non-stoichiometry, i.e., δ∼0, for all compositions even those rich in Co. High-resolution electron energy loss spectroscopy (EELS) indicates that cobalt is high-spin Co³⁺ or high-spin Co⁴⁺ for all x. Appropriate combinations of Ru⁴⁺, Ru⁵⁺, HS Co³⁺ and HS Co⁴⁺ are proposed for each x which are consistent with the observed Ru(Co)-O distances. Significant amounts of Co⁴⁺ must be present for large x values to explain the short observed distances. Broad maxima in the d.c. susceptibilities are found between 78 and 97 K with increasing x, along with zero-field-cooled (ZFC) and field-cooled (FC) divergences suggesting glassy magnetic freezing. A feature near 155 K for all samples indicates a residual amount of ferromagnetic SrRuO₃ not detected by X-ray diffraction.