LB膜诱导下草酸钙晶体的生物矿化研究

草酸钙（CaC２O４）结石是生物体内异常矿化形成的产物，是泌尿系结石的主要组成部分犤１犦。它形成于泌尿系统中尿路表皮细胞上犤２犦。磷脂的Langmuir－Blodgett（LB）膜是生物细胞膜的简化模拟体系犤３犦。用磷脂LB膜作为模板来研究CaC２O４晶体的形成过程，比在水溶液中更能接近CaC２O４结石在生物体内细胞膜表面形成的真实情况，将有助于对尿路结石的形成及防治的研究犤４犦。尿大分子硫酸软骨素A（C４S）存在于尿液中，但不存在于CaC２O４结石中。在结石病人尿液中C４S的含量明显低于正常人尿液中的含量，因此推测其在体内…     

第二代抗癌药物卡铂与L-硒代蛋氨酸和L-蛋氨酸的相互作用研究

硒作为一种生命体所必须的微量营养元素，近年来由于其在防癌犤１，２犦和抗氧化，增强免疫力等方面的作用而越来越受到广泛的关注。其中L－硒代蛋氨酸（L－Se－MetH）作为一种有效的防癌剂正处在临床试验阶段犤２犦。对于硒代蛋氨酸在抑制癌细胞生长和在体内的抗氧化作用的机理已有很多报导犤３～５犦，但作为生物体的主要含硒氨基酸之一，与L－蛋氨酸（L－MetH）相比，它与金属离子的作用却少见报导犤６，７犦。本文利用电喷雾质谱（ESMS）和２D犤１H－１５N犦HSQCNMR的手段研究了第二代铂类抗癌药物卡铂（犤Pt（NH３）２（CB…     

[Cu(Hsal)2(py)2]n晶体结构和二维堆积网络

０引言水杨酸具有羧基和羟基，是双功能基配体，羧基和羟基可分别脱去氢，因此有多种形式可参与配位（见Scheme１），其中Hsal－１的形式仅见一例报道犤１犦，其可靠性有待更多的研究来确证。对铜／水杨酸／吡啶三元体系的研究已有多篇文献报道犤２～４犦，亦有几种化合物合成，例如Cu（Hsal）２（py）２和Cu（sal）（py）２等。配合物Cu（sal）（py）２的可靠性值得怀疑，原文中无合成和表征犤３犦。铜／水杨酸／吡啶衍生物三元体系已有多个晶体结构报道犤５，６犦，但迄今无铜／水杨酸／吡啶三元体系晶体结构报道。对于配合物Cu（Hsal…     

A2Ca[B4O5(OH)4]2·8H2O(A=Rb,Cs)硼氧酸盐复盐的合成与表征

硼氧酸盐晶体结构复杂，因此出现了许多具有特殊物理性能的晶体功能材料犤１，２犦，尤其是重稀碱金属硼氧酸盐（或复盐），如CsLiB６O１０犤３犦、LiRbB４O７犤４犦和CsB３O５（CBO）犤５犦都是非线性光学材料。一些学者对铷、铯的偏硼氧酸盐、四硼氧酸盐和五硼氧酸盐的合成、性质及晶体结构等进行过研究犤６～９犦。硼氧酸盐复盐，大多为碱金属和碱土金属、碱金属和碱金属及碱土金属和碱土金属的硼氧酸盐犤１０犦，如自然界存在的钠硼解石狖NaCa犤B５O６（OH）６犦·５H２O狚、硼钠镁石狖Na２Mg犤B６O８（OH）４犦２·６H２O…     

溶剂热合成法制备(Zn,Hg)S微晶和薄膜

近年来，由于Ⅱ～Ⅵ族半导体纳米材料的特殊物理、化学性质及其在半导体、光学器件、激光二极管、IR探测器等方面的广泛应用，它们的制备和表征引起了人们越来越大的兴趣犤１～１１犦。现在（Zn，Hg）S微晶正被广泛而深入的研究和应用。例如：一种发蓝光的激光二极管已经设计成功，它包含一夹在两衬层间的活性层，无论是在衬层还是在活性层中都包含有（Zn，Hg）S犤５犦。Sugao也曾报道过一种以（Zn，Hg）S为基础的半导体激光器件犤６犦。Parkin曾用MCl２（M＝Zn，Cd，Hg）和Li２E（E＝O，S，Se，Te）混合热解法制备ME或MxM'yS…     

一个新的具有梯子型链状结构的有机二膦酸铜化合物的合成和结构

０IntroductionThemetalphosphonatechemistryhasbeenofin－creasinginterestinthepastdecadeduetotheirpoten－tialapplicationsinionexchanges，adsorptionsandsensors犤１～４犦．Anumberofphosphonatecompoundshavebeenprepared，amongwhichthecoppercompoundsareuniquebecauseoftheversatilecoordinationcapabilitiesofCuions犤５～７犦．Basedon１－hydroxyethylidenediphosp－honate犤hedp，CH３C（OH）（PO３）２犦，severalcopperph－osphonateshavebeenobtainedinourlaboratoryin－cluding犤NH３（CH２）２NH３犦Cu２（he…     

[Ni(en)_3]_4[HV~(Ⅳ)_(12)V~Ⅴ_6O_(42)(PO_4)]复合物的合成及晶体结构

金属－氧簇合物不仅在许多均相和异相的反应中有潜在的应用，而且还有可能形成一些特殊功能的材料，已经引起了从事生物无机和磁化学等科学家的兴趣犤１，２犦。其中具有球壳形结构的狖V１８O４２狚，通式为MX犤HYV１８O４２（E）犦的簇合物在国内外已有一些报道，如（N２H５）２犤Zn３V１８O４２（SO４）（H２O）１２犦·２４H２O犤３犦，狖犤Cu（１，２－pn）２犦４犤V１８O４２（H２O）犦狚·８nH２O犤４犦，其中由于还原程度的不同，狖V１８O４２狚的钒的混合价态组成有多种多样。在已见报道中金属离子M主要是碱金属和碱土…     

钛氧有机化合物常压低温液相合成纳米二氧化钛晶体的研究

二氧化钛晶体有三种晶型，锐钛矿型、金红石型和板钛矿型，每一种晶型都表现出不同的性质，如光折射指数、化学反应性和光催化活性。锐钛矿和金红石型纳米二氧化钛在催化剂犤１，２犦、太阳能转化犤３～６犦、功能陶瓷犤７～９犦、湿度和高温氧气的敏感元件犤１０犦、化妆品犤１１犦和无机膜犤１２犦等许多方面都有广泛的应用前景。金红石型TiO２比锐钛矿型稳定，有较高的硬度、密度、介电常数和折射率，因此在高级涂料、化妆品和电子陶瓷等方面有着更重要的应用价值。锐钛矿型纳米TiO２晶体已发展的制备法主要有Sol－Gel法犤１３，１４…     

胆红素有序分子膜的行为研究

研究了不同亚相表面胆红素(BR)单分子膜和LB膜的性质,讨论了胆红素分子在有序分子膜中的堆积密度、分子伸展和金属离子配位。在气-水界面,BR与金属离子的配位导致BR单分子截面积、崩溃压和可见紫外光谱的变化。原子力显微镜表明BR-Cu单分子膜的厚渡为1.23 nm。     

正丁基黄原酸根合镉(Ⅱ)的合成和晶体结构

黄原酸配合物以及它们与各种路易斯碱反应的产物得到广泛的研究犤１～４犦。可溶性的黄原酸碱金属盐广泛用于汞、银、镉等金属的萃取分离犤５～７犦，并且这类盐对于汞中毒具有解毒作用犤８犦。E．D．Zelmon等犤９犦对过渡金属黄原酸配合物的非线性光学性质进行了研究。但迄今为止，对黄原酸镉配合物与路易斯碱的反应与结构研究较少。我们首先合成了一种配位聚合物犤Cd（S２CO－n－C４H９）２犦n晶体，然后利用吡啶与犤Cd（S２CO－n－C４H９）２犦n反应破坏其原有配位聚合物的结构，得到了犤Cd（C５H５N）２（S２CO－n－C４H９）…     

Electrocatalytic oxidation of NADH by rutin in biomembrane-like films on glassy carbon electrode

Stable lipid film was made by casting dipalmitoylphosphatidylcholine (DPPC) and rutin onto the surface of a glassy carbon (GC) electrode. The electrochemical behavior of rutin in the DPPC film was studied. The modified electrode coated with rutin gave quasi-reversible reduction-oxidation peak on cyclic voltammogram in the phosphate buffer (pH 7.4). The peak current did not decrease apparently after stored at 4°C for 8 hours in refrigerator. This model of biological membrane was used to investigate the oxidation of dihydronicotinamide adenine dinucleotide (NADH) by rutin. Rutin in the film acts as a mediator. The modified electrode shows a great enhancement and the anodic peak potential was reduced by about 220 mV in the oxidation of 5×10⁻³ mol L⁻¹ NADH compared with that obtained at a bare glassy carbon electrode.     

血红素LB膜的电化学行为

采用循环伏安法研究了血红素与脑磷脂混合Y型LB（Langmuir-Blodgett）膜在玻碳电极上的电化学行为，结果表明血红素LB膜有良好的电化学活性，在0．1mol/L KCl溶液中有一对氧化还原峰（－0．42V／－0．30V）；将血红素LB膜转移到玻碳电极表面得到的血红素LB膜修饰电极（heme LB-GC）对溶液中溶解氧的电化学还原有良好的催化作用，其催化还原过程具有不可逆电荷传递特性。     

聚苯胺薄膜修饰电极对抗坏血酸的电催化氧化

本文表明聚苯胺(PAn)薄膜修饰电极对水溶液中的抗坏血酸(AH_2)在较宽的pH范围和较宽的浓度范围内均有良好的电催化氧化作用, 为EC平行催化过程。利用旋转圆盘电极(RDE)进行了催化过程动力学分析, 求出了催化反应动力学参数。在抗坏血酸浓度10~(-2)～10~(-6) mol·L~(-1)范围内, 催化峰电流与AH_2浓度均成良好的线性关系, 且PAn薄膜修饰电极具有很好的稳定性, 有应用分析抗坏血酸的意义。     

The Electrochemical Behavior of p‐tert‐Butyl‐sulfonylcalix[4]arene and Its Selective Complexation with Metal Ions at Water‐Air Interface

The electrochemical behavior of p‐tert‐butyl‐sulfonylcalix[4]arene (SCA) has been investigated by cyclic voltammetry. The results show that there is an irreversible electrochemical oxidative wave when the potential ranges from 0.9 to 1.9 V versus saturated calomel electrode (SCE) in CH₂Cl₂ at a glassy carbon electrode. The kinetic parameters of the andic wave, such as α,n, k_s, D and the diffusion activation energy (E_d), were discussed. In addition, the interaction of SCA with metal ions at the water‐air interface was also discussed by Langmuir‐Blodgett (LB) techniques. The results confirm that the selectivity of SCA as ligand for Pb²⁺ in monomolecular film is very high by complexation action, which provide the foundation that LB film of SCA modified glassy carbon electrode (GCE) as voltammetric sensor to detect trace amounts of Pb²⁺.     

A Sensitive Voltammetric Method for the Determination of Diazinon Insecticide

A sensitive voltammetric method is developed for the determination of diazinon, an organophosphorus pesticide, using a Nafion®-coated glassy carbon electrode as an enrichment film. The analysis of diazinon in aqueous solutions using sensitive instrumental methods has gained importance. Investigation of the electrochemical behavior of diazinon on a Nafion®-coated glassy carbon electrode reveals the presence of a specific oxidation peak of analytical significance. The experimental parameters, such as pH, film thickness, preconcentration potential, preconcentration time, and square-wave voltammetric parameters were optimized. Using this method, a linear calibration curve for diazinon was obtained up to 5 M range in pH 1 citrate buffer solution with a detection limit (S/N = 3) of 75 nM.     

Preparation of cobalt hydroxide film modified electrode and its analytical application

Cobalt hydroxide film modified electrode was prepared by depositing cobalt hydroxide on glassy carbon electrode (GCE) surface in an alkaline aqueous solution and then characterized by cyclic voltammetry. The electrochemical behavior of resorcin on the film modified electrode was investigated. The results show that cobalt hydroxide films in alkaline solutions have good electrocatalytical activity towards the oxidation of resorcin. The recovery of resorcin from sample ranged from 95.2 to 103.4% and the oxidation peak currents were directly proportional to the resorcin concentration from 5.0 × 10⁻⁶ to 1.05 × 10⁻⁴ M with correlation coefficient of 0.9986. A detection limit of 1.0 × 10⁻⁷ M for resorcin was estimated. Various factors affecting the electrocatalytical activity of cobalt hydroxide film were investigated in detail. Real water samples were analyzed and satisfactory results were obtained.     

Effect of Various Deposition Techniques,Electrode Materials and Posttreatment with Tetrabutylammonium and Tetrabutylphosphonium Salts on the Electrochemical Behavior and Stability of Various Prussian Blue Modified Electrodes

The effect of various deposition techniques, electrode materials and posttreatment with tetrabutylammonium and tetrabutylphosphonium salts on the electrochemical behavior and stability of various Prussian blue (PB) modified electrodes, namely PB modified glassy carbon electrodes, silicate‐film supported PB modified glassy carbon electrodes, PB‐doped silicate glassy carbon electrodes, PB modified carbon ceramic electrodes using electrochemical deposition and PB modified carbon ceramic electrodes using chemical deposition is reported. Cyclic voltammetry and amperometric measurements of hydrogen peroxide were performed in a flow injection system while the carrier phosphate buffer (pH 7.0) with a flow rate of 0.8 mL min^?1 was propelled into the electrochemical flow through cell housing the PB modified working electrode as well as an Ag|AgCl|0.1 M KCl reference and a Pt auxiliary electrode. The results showed that the deposition procedure, electrode material and posttreatment with additional chemicals can significantly alter the stability and electrochemical behavior of the PB film. Among the studied PB modified electrodes, those based on carbon ceramic electrodes modified with a film of electropolymerized PB showed the best electrochemical stability.     

Electrode Modified with Langmuir–Blodgett (LB) Film of Calixarenes for Preconcentration and Stripping Analysis of Hg(II)

A new type of current sensor, Langmuir–Blodgett (LB) film of calixarene on the surface of glassy carbon electrode (GCE) was prepared for determination of mercury by anodic stripping voltammetry (ASV). An anodic stripping peak was obtained at 0.15 V (vs. SCE) by scanning the potential from ?0.6 to +0.6 V. Compared with a bare GCE, the LB film coated electrode greatly improves the sensitivity of measuring mercury ion. The fabricated electrode in a 0.1 M H₂SO₄+0.01 M HCl solution shows a linear voltammetric response in the range of 0.07–40 μg L^?1 and detection limit of 0.04 μg L^?1 (ca. 2×10^?10 M). The high sensitivity, selectivity, and stability of this LB film modified electrode demonstrates its practical application for a simple, rapid and economical determination of Hg²⁺ in a water sample.     

A glassy carbon electrode modified with antimony and poly(p-aminobenzene sulfonic acid) for sensing lead(II) by square wave anodic stripping voltammetry

We have developed a sensor for the square wave anodic stripping voltammetric determination of Pb(II). A glassy carbon electrode was modified with a thin film of an antimony/poly(p-aminobenzene sulfonic acid) composite in air-saturated aqueous solution of pH 2.0. Compared to a conventional antimony film electrode, the new one yields a larger stripping signal for Pb(II). The conditions of polymerization, the concentration of Sb(III), the pH value of the sample solution, the deposition potential and time, frequency, potential amplitude, and step increment potential were optimized. Under the optimum conditions, a linear response was observed for Pb(II) in the range of 0.5 to 150.0 μg?L^?1. The detection limit for Pb(II) is 0.1 μg?L^?1.

Electrocatalytic oxidation of bilirubin at ferrocenecarboxamide modified MWCNT–gold nanocomposite electrodes

A glassy carbon electrode (GCE) modified with ferrocenecarboxamide, gold nanoparticles and multiwall carbon nanotubes was constructed and characterized by field emission scanning electron microscopy and cyclic voltammetry. The electrochemical behavior of bilirubin (BR) on the modified electrode was investigated and it was found that the modified electrode had an obvious electrocatalytic effect on bilirubin. Compared with a bare GCE, the modified electrode exhibited a marked enhancement in the current response for bilirubin. Amperometry was employed to investigate the electrocatalytical oxidation of bilirubin on the modified electrode. As a result, it exhibits an excellent electrocatalytic response to bilirubin with a response time of less than 5 s, a broad linear range of 1 to 100 μmol L^?1, as well as good long-term stability and reproducibility.