PREPARATION OF STAR NETWORK PEG-BASED GEL POLYMER ELECTROLYTES FOR ELECTROCHROMIC DEVICES

An amorphous,colorless,and highly transparent star network polymer with a pentaerythritol core linking four PEG-block polymeric arms was synthesized from the poly(ethylene glycol)(PEG),pentaerythritol,and dichloromethane by Williamson reaction.FTIR and ~1H-NMR measurement demonstrated that the polymer repeating units were C[CH_2-OCH_2O-(CH_2CH_2O)_m-CH_2O-(CH_2CH_2O)_n-CH_2O]_4.The polymer host held well mechanical properties for pentaerythritol cross-linking.The gel polymer electrolytes based on Lithium...     

Ion conductivity studies of blends of poly(methyl methacrylate)-g-poly(ethylene glycol) and poly(ethylene glycol) complexed with LiCF3 SO3

Polymer electrolytes which are adhesive, transparent, and stable to atmospheric moisture have been prepared by blending poly(methyl methacrylate)-g-poly(ethylene glycol) with poly(ethylene glycol)/LiCF₃ SO₃ complexes. The maximum ionic conductivities at room temperature were measured to be in the range of 10⁻⁴ to 10⁻⁵ s cm⁻¹. The clarity of the sample was improved as the graft degree increased for all the samples studied. The graft degree of poly(methyl methacrylate)-g-poly(ethylene glycol) was found to be important for the compatibility between the poly(methyl methacrylate) segments in poly(methyl methacrylate)-g-poly(ethylene glycol) and the added poly(ethylene glycol), and consequently, for the ion conductivity of the polymer electrolyte. These properties make them promising candidates for polymer electrolytes in electrochromic devices. © 1996 John Wiley & Sons, Inc.     

Cross-linking copolymers of acrylates’ gel electrolytes with high conductivity for lithium-ion batteries

The cross-linking gel copolymer electrolytes containing alkyl acrylates, triethylene glycol dimethacrylate, and liquid electrolyte were prepared by in situ thermal polymerization. The gel polymer electrolytes containing 15 wt% polymer content and 85 wt% liquid electrolyte content with sufficient mechanical strength showed the high ionic conductivity around 5?×?10^?3 Scm^?1 at room temperature. The gel electrolytes containing different polymer matrices were prepared, and their physical observation and conductivity were discussed carefully. The cross-linking copolymer gel electrolytes of alkyl acrylates with other monomers were designed and synthesized. The results showed that copolymerization can improve the mechanical properties and ionic conductivities of the gel electrolytes. The polymer matrices of gels had excellent thermal stability and electrochemical stability. The scanning electron microscope analysis showed the gel electrolyte was the homogeneous structure, and the cross-linking polymer host was the porous three-dimensional network structure, which demonstrated the high conductivity of the gel electrolytes. The gel polymer Li-ion battery was prepared by this in situ thermal polymerization. The cell exhibited high charge-discharge efficiency at 0.1 C. The results of LiFePO4-PEA-Li cell and graphite-PEA-Li cell showed that gel polymer electrolytes have good compatibility with the battery electrodes materials.     

Self-Repairable and Flexible Polymer Network Electrolyte with Enhanced Lithium-Ion Conduction for Lithium Metal Batteries

Developing high-performance functional polymer-based electrolytes is important for realizing next generation safe lithium metal batteries. In this study, a new type of quasi-solid polymer network electrolyte (SIPH-x-y%) was prepared by combining synthesized polymer network (SIPH) containing urethane bond linked ionic liquids (ILs), polyethylene glycol (PEG), and disulfide bond moieties, lithium bis(trifluoromethanesulfonyl)imide salt (LiTFSI), and glyme type additive. It was found that SIPH-20-40% was mechanically flexible, self-healable, and showed high ionic conductivity of 2.67×10⁻⁴ S cm⁻¹. Also, SIPH-20-40% possesses a high lithium ion transference number of 0.43 and good electrochemical stability. These properties enabled the SIPH-20-40% electrolyte membrane to support Li/Li symmetrical cell to cycle stably during long term Li plating and stripping. The Li/SIPH-20-40%/LFP showed high delivered specific capacity and good stability (166.1 mAh g⁻¹ after 106 cycles at 0.2 C). Such glyme doped polymer network electrolyte provides new experimental findings for developing polymer-based electrolyte with excellent mechanical integrity and battery related properties.     

P(VAc-MA)/PMMA为基体的聚合物电解质制备及其在电致变色器件中的应用

以醋酸乙烯酯(VAc)和丙烯酸甲酯(MA)为单体, 采用半连续种子乳液聚合法制备了无规共聚物P(VAc-MA), 以PMMA与P(VAc-MA)的共混物为基体制备了聚合物电解质. 用红外光谱(FTIR)、X射线衍射(XRD)、热重分析(TG)、紫外光谱(UV)、力学性能测试及电化学交流阻抗等方法研究了聚合物、聚合物膜和聚合物电解质的性质. 结果表明, VAc与MA通过打开各自的CC键聚合生成P(VAc-MA); P(VAc-MA)与PMMA共混后结晶状态发生了变化, 增加了无定形相区, 降低了链段运动的能量壁垒, 提高了热稳定性和拉伸强度. 以P(VAc-MA)/PMMA为基体的聚合物电解质膜具有很高的透明性, 最大室温电导率达到1.17×10-3 S/cm; 离子电导率随着温度的升高而迅速增加, 电导率-温度曲线符合Arrhenius方程; 将此电解质用于全固态电致变色显示器件显示出优良的性能.     

Structure and ion transport in an ethylene carbonate-modified biodegradable gel polymer electrolyte

The influence of ethylene carbonate (EC) addition on 85poly(ε-caprolactone):15Lithium thiocyanate (85PCL:15LiSCN) polymer electrolyte is investigated using X-ray diffraction, impedance spectroscopy, Wagner's polarization and electrochemical measurements. The results reveal that the amorphicity of the 85PCL:15LiSCN system increases with increase of EC content up to an optimal level of 40 wt.%. This is reflected in the electrical properties of the gel polymer electrolytes, i.e., the 40 wt.% EC-incorporated gel polymer electrolyte exhibits both high amorphicity and high electrical conductivity as compared to the other samples. The EC concentration dependences of dielectric constant and electrical conductivity show a similar trend, indicating that these properties are closely related to each other. The total ionic transference numbers of EC-incorporated gel polymer electrolytes are in the range 0.989–0.993, demonstrating that they are almost completely ionic conductors. The electrochemical stability window of the 40 wt.% EC-incorporated gel polymer electrolyte is ∼4.1 V along with the electrical conductivity of 2.2 × 10⁻⁴ S cm⁻¹, which is significantly improved as compared to the 85PCL:15LiSCN system (3.0 V and 1.04 × 10⁻⁶ S cm⁻¹). Consequently, the addition of EC in the 85PCL:15LiSCN polymer electrolyte leads to a promising improvement in its various properties.     

Tough Gel Electrolyte Using Double Polymer Network Design for the Safe,Stable Cycling of Lithium Metal Anode

The growth of lithium dendrites and low coulombic efficiency restrict the development of Li metal anodes. Polymer electrolytes are expected to be promising candidates to solve the issue, but ways to obtain a polymer electrolyte that integrates high ionic conductivity and high mechanical toughness is still challenging. By introducing a double polymer network into the electrolyte design to reshape it, a tough polymer electrolyte was developed with high conductivity, and stable operation of lithium metal anodes was further realized. The double network (DNW) gel electrolyte has high modulus of 44.3 MPa and high fracture energy of 69.5 kJ m⁻². The conductivity of DNW gel is 0.81 mS cm⁻¹ at 30 °C. By using this gel electrolyte design, the lithium metal electrode could be cycled more than 400 times with a coulombic efficiency (CE) as high as 96.3 % with carbonate‐based electrolytes.     

Ion Conducting Polyethylene Oxide-Based Polymer Electrolyte Dopped with Ionic Liquid-Trifluoromethanesulfonic Chloride

In last few decades, polymer electrolyte is the most promising candidate for the fabrication of electrochemical devices. In current work, the influence of adding the room-temperature ionic liquid (trifluoromethanesulfonic chloride – CClF3O2S) in polyethylene oxide (PEO): ammonium iodide (NH4I) polymer electrolyte has been studied. The IL-doped polymer electrolyte films are synthesized by solution casting method with varying stoichiometric ratios. Several experimental techniques including optical polarizing microscope, impedance spectroscopy, X-ray diffraction, Linear sweep voltammetry, Ionic transference number thermal analysis, and electrical conductivity measurements at room temperature have been studied in detail. The complex material's maximum conductivity has been determined to be 3.3 × 10⁻⁵ S cm⁻¹ at room temperature. The POM images show the increase in amorphous region which further confirm the improvement in ionic conductivity. Ionic transference number 0.96 shows the system is purely ionic in nature. The ESW of the IL doped polymer electrolyte is also sawed to be 3.32 V which is suitable for the fabrication of electrochemical devices.     

Improving electrochemical performance of poly(vinyl butyral)-based electrolyte by reinforcement with network of ceramic nanofillers

This study has concerned the development of polymer composite electrolytes based on poly(vinyl butyral) (PVB) reinforced with calcinated Li/titania (CLT) for use as an electrolyte in electrochemical devices. The primary aim of this work was to verify our concept of applying CLT-based fillers in a form of nano-backbone to enhance the performance of a solid electrolyte system. To introduce the network of CLT into the PVB matrix, gelatin was used as a sacrificial polymer matrix for the implementation of in situ sol–gel reactions. The gelatin/Li/titania nanofiber films with various lithium perchlorate (LiClO₄) and titanium isopropoxide proportions were initially fabricated via electrospinning, and ionic conductivities of electrospun nanofibers were then examined at 25 °C. In this regard, the highest ionic conductivity of 2.55 × 10⁻⁶ S/cm was achieved when 10 wt% and 7.5 wt% loadings of LiClO₄ and titania precursor were used, respectively. The nanofiber film was then calcined at 400 °C to remove gelatin, and the obtained CLT film was then re-dispersed in solvated PVB-lithium bis(trifluoromethanesulfonyl)imide (PVB-LiTFSI) solution before casting to obtain reinforced composite solid electrolyte film. The reinforced composite PVB polymer electrolyte film shows high ionic conductivity of 2.22 × 10⁻⁴ S/cm with a wider electrochemical stability window in comparison to the one without nanofillers.

     

Preparation of a novel polymer gel electrolyte based on N-methyl-quinoline iodide and its application in quasi-solid-state dye-sensitized solar cell

Using poly(acrylonitrile-co-styrene) as polymer host, 1,2-propanediol carbonate, dimethyl carbonate and ethylene carbonate as mixture solvent, N-methyl-quinoline iodide and iodine as the source of I⁻/I₃ ⁻, a novel polymer gel electrolyte with ionic conductivity of 5.12 × 10⁻³ S· cm⁻¹ at 25°C was prepared by sol-gel and hydrothermal methods. Based on the polymer gel electrolyte, a quasi-solid-state dye-sensitized solar cell was fabricated. The solar cell possess better long-term stability and light-to-electrical energy conversion efficiency of 4.04% under irradiation of 100 mW· cm⁻². The influences of polymer host, solvent, N-methyl-quinoline iodide and temperature on ionic conductivity of the polymer gel electrolyte and the performance of the dye-sensitized solar cell was discussed.     

Synthesis of organic sulfobetaine‐based polymer gel electrolyte for dye‐sensitized solar cell application

We have synthesized eco‐friendly, economic, and equally efficient polysulfobetaine‐based gel electrolyte to the alternative of liquid electrolyte in the fabrication of dye‐sensitized solar cells (DSSCs) for the first time. This nitrogen‐rich and highly conductive polysulfobetaine was synthesized by an easy and facile method without the use of any catalyst and explored for its DSSC application. The synthesized polymer gel electrolyte exhibited good ionic conductivity about 6.8 × 10^?3 Scm^?1 at ambient temperatures. DSSCs were fabricated based on this polysulfobetaine gel electrolyte and studied for their performance based on photovoltaic parameters. The DSSC photovoltaic results were appreciable and are Voc = 0.82 V, Jsc = 11.49 mA/cm², FF = 66%, and PCE = 6.26% at 1 sun intensity. These values are slightly lower than conventional liquid electrolyte‐based DSSC shown as Voc = 0.78 V, Jsc = 12.90 mA/cm², FF = 69%, and PCE = 7.07%, both at 100 mWcm^?2. Conductivity and photovoltaic parameters of the device reveals that as prepared polysulfobetaine‐based polymer gel electrolyte may be useful in the fabrication of DSSC and other electrochemical devices. Copyright © 2017 John Wiley & Sons, Ltd.     

Effects of ethylene glycol dimethacrylate as cross-linker in ionic liquid gel polymer electrolyte based on poly(glycidyl methacrylate)

In this study, modified poly(glycidyl methacrylate)-based films for gel electrolyte were prepared by an in situ UV photopolymerization technique. The effects of adding ethylene glycol dimethacrylate (EGDMA) to the polymer host were studied through X-ray diffraction analysis and differential scanning calorimetry. The results from Fourier transform-infrared spectra indicate complete polymerization among the monomers. The addition of EGDMA to the formulation of gel polymer electrolyte increased the loading of 1-butyl-3-methylimidazolium bis(fluoromethylsulfonyl)imide up to 200 wt.% with the highest value of 8.2 × 10^?4 S cm^?1. All the gel polymer electrolyte membranes obeyed the Arrhenius law.     

Tough Gel Electrolyte Using Double Polymer Network Design for the Safe,Stable Cycling of Lithium Metal Anode

The growth of lithium dendrites and low coulombic efficiency restrict the development of Li metal anodes. Polymer electrolytes are expected to be promising candidates to solve the issue, but ways to obtain a polymer electrolyte that integrates high ionic conductivity and high mechanical toughness is still challenging. By introducing a double polymer network into the electrolyte design to reshape it, a tough polymer electrolyte was developed with high conductivity, and stable operation of lithium metal anodes was further realized. The double network (DNW) gel electrolyte has high modulus of 44.3 MPa and high fracture energy of 69.5 kJ m^?2. The conductivity of DNW gel is 0.81 mS cm^?1 at 30 °C. By using this gel electrolyte design, the lithium metal electrode could be cycled more than 400 times with a coulombic efficiency (CE) as high as 96.3 % with carbonate‐based electrolytes.     

Boron-incorporated Sulfonated polysulfone/polyphosphoric acid electrolytes for supercapacitor application

In the present work, boron-doped multicomponent gel polymer electrolytes composed of host polymer, sulfonated polysulfone (SPSU) and the additives; ionic liquid, 1-ethyl-3-methyl-imidazolium tetrafluoroborate (IL), H₃BO₃, polyphosphoric acid (PPA) were prepared. Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) techniques were used to characterize the sulfonated polysulfone-based electrolytes. Ion conductivity of these gel electrolytes were studied by dielectric impedance analyzer within the temperature from ?20 to 100°C. The ionic conductivity of the SPSU-5IL-1PPA and SPSU-5IL-1H₃BO₃-1PPA were measured as 4.8 × 10^?3 and 9 × 10^?4 S cm^?1, respectively. Supercapacitor having activated carbon-based composite electrode and electrolyte was constructed with the configuration: Al/C/electrolyte/C/Al. The electrochemical properties and ion transfer characteristics of the supercapacitor were investigated by the cyclic voltammetry (CV). Galvanostatic charge—discharge experiments exhibited good electrochemical reversibility and produced a specific capacitance value of 120 F g^?1 at 1 A g^?1. The symmetric supercapacitor system was retained almost 85% of its initial activity after 1000 cycle.     

Mg-ion conducting gel polymer electrolyte membranes containing biodegradable chitosan: Preparation,structural, electrical and electrochemical properties

A biodegradable gel polymer electrolyte system based on chitosan/magnesium trifluoromethanesulfonate/1-ethyl-3-methylimidazolium trifluoromethanesulfonate (CA/Mg (Tf)₂/EMITf) is developed. The structure, thermal performance, mechanical properties, ionic conductivity, relaxation time, electrochemical stability and ionic transport number of the membranes are analyzed by various techniques. The ion migration mainly depends on the complexation and decomplexation of Mg²⁺ with amine band (NH₂) in chitosan. The 90CA-10Mg (Tf)₂ system plasticized with 10% EMITf (relative to the amount of 90CA-10Mg (Tf)₂) is identified as the optimum one and the temperature dependence of ionic conductivity obeys the Arrhenius rule. Moreover, the relaxation time of the electrolyte is very short, being just 1.25 × 10⁻⁶ s, and its electrochemical stability window is quite wide, being up to 4.15 V. The anodic oxidation and cathodic reduction of Mg at the Mg-electrode/electrolyte interface is facile, and the ionic transference number of this electrolyte is 0.985, indicating that it could be a potential electrolyte candidate for Mg-ion devices.     

Nanocomposite solid polymeric electrolyte of 49% poly(methyl methacrylate)-grafted natural rubber–titanium dioxide–lithium tetrafluoroborate (MG49-TiO2-LiBF4)

A nanocomposite polymer electrolyte consisting of 49% poly(methyl methacrylate)-grafted natural rubber (MG49) as a polymer matrix, lithium tetrafluoroborate (LiBF₄) as a dopant salt, and titanium dioxide (TiO₂) as an inert ceramic filler was prepared by solution casting technique. The ceramic filler, TiO₂, was synthesized in situ by a sol–gel process. The ionic conductivity was investigated by alternating current impedance spectroscopy. X-ray diffraction (XRD) was used to determine the structure of the electrolyte, and its morphology was examined by scanning electron microscopy (SEM). The highest conductivity, 1.4 × 10⁻⁵ S cm⁻¹ was obtained at 30 wt.% of LiBF₄ salt addition with 6 wt.% of TiO₂ filler content. Ionic conductivity was found to increase with the increase of salt concentration. The optimum value of conductivity was found at 6 wt.% of TiO₂. The XRD analysis revealed that the crystalline phase of the polymer host slightly decreased with the addition of salt and filler. The SEM analysis showed that the smoother the surface of the electrolyte, the higher its conductivity.

     

Star‐shaped polymers having side chain poss groups for solid polymer electrolytes; synthesis,thermal behavior,dimensional stability,and ionic conductivity

A series of organic/inorganic hybrid star‐shaped polymers were synthesized by atom transfer radical polymerization using 3‐(3,5,7,9,11,13,15‐heptacyclohexyl‐pentacyclo[9.5.1.1^3,9.1^5,15.1^7,13]‐octasiloxane‐1‐yl)propyl methacrylate (MA‐POSS) and poly(ethylene glycol) methyl ether methacrylate (PEGMA) as monomers and octakis(2‐bromo‐2‐methylpropionoxypropyldimethylsiloxy)octasilsesquioxane as an initiator. Star‐shaped polymers with methyl methacrylate (MMA) and PEGMA moieties were also prepared for comparison purposes. Dimensionally stable freestanding film could be obtained from the hybrid star‐shaped polymer containing 26 wt % of MA‐POSS moieties although its glass transition temperature is very low, ?60.9 °C. As a result, the hybrid star‐shaped polymer electrolyte containing lithium bis(trifluoromethanesulfonyl)imide showed ionic conductivities (1.75 × 10^?5 S/cm at 30 °C), which were two orders of magnitude higher than those of the star‐shaped polymer electrolyte with MMA moieties. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Ionogels encompassing ionic liquid with liquid like performance preferable for fast solid state electrochromic devices

Novel ionogels encompassing an ionic liquid encaged in an inorganic matrix were synthesized by sol–gel chemistry. The ability of these highly conducting ionogels (∼10⁻² S cm⁻¹ at 25 °C) to act as liquid electrolytes in spite of their solid form has been exploited in inorganic electrochromic devices based on tungsten oxide and Prussian blue electrodes. These devices exhibit extremely fast switching kinetics and make it the best and only candidate for the realization of fast all solid state electrochromic devices.     

Influence of Carbon Black on Conductivity and Structure of Polyethylene Oxide Based Polymer Electrolyte Film

The potential applications of carbon black are expected to grow as science and technology improve offering up new possibilities for innovation throughout disciplines included in the field of energy storage. The present work shows the influence of carbon black to improve the ionic conductivity of the polymer electrolyte. The synthesis of polyethylene oxide: ammonium iodide based polymer electrolyte incorporated with carbon black varying from 0.01 to 0.06 wt% with respect to PEO: NH4I system by solution casting method. Different characterizations like polarized optical microscopy (POM), impedance spectroscopy, and ionic transference number (t_ion) are studied in detail. The maximum ionic conductivity is achieved at 0.05 wt% carbon black shows 1.20 × 10⁻⁵ S cm⁻¹ at ambient temperature. In accordance with POM data, the amorphous region has increased whereas the crystalline region has shrunk which further indicated the increase in ionic conductivity . The value of (t_ion) is calculated to be 0.97 which shows the system is ionic in nature. PEO based polymer electrolyte doped carbon black can be used for the fabrication of energy storage devices.     

Effect of EMIMBF4 ionic liquid addition on the structure and ionic conductivity of LiBF4-complexed PVdF-HFP polymer electrolyte films

New polymer electrolyte films of lithium tetrafluoroborate (LiBF₄)-complexed poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP) embedded with different quantities of 1-ethyl-3methylimidazolium tetrafluoroborate (EMIMBF₄) ionic liquid were prepared by solution casting. The prepared films were characterized using various techniques: X-ray diffraction, scanning electron microscopy, impedance spectroscopy and electrochemical measurements. The pure PVdF-HFP possessed a semi-crystalline structure and its amorphicity increased with the addition of LiBF₄ salt and EMIMBF₄ ionic liquid. The size and interconnection of pores in the films were enhanced by EMIMBF₄. Impedance measurements indicated that the room-temperature ionic conductivity of the films increased with increasing EMIMBF₄ concentration until 15 wt.%, being up to 0.202 × 10⁻⁴ S cm⁻¹, and then decreased with further increasing EMIMBF₄ concentration. In addition, the temperature-dependent ionic conductivity of the polymer electrolyte films followed an Arrhenius relation and the 15 wt.% EMIMBF₄-incorporated gel polymer electrolyte film exhibited a low activation energy for ionic conduction, being about 0.28 eV. Finally, the electrochemical stability window of the 85PVdF-HFP:15LiBF₄+15 EMIMBF₄ gel polymer electrolyte films was evaluated as approximately 4.4 V, which is a promising value for ion battery applications.