Thermodynamic analysis of lysozyme adsorbed to silica

The structural stability of hen egg white lysozyme in solution and adsorbed to small colloidal silica particles at various surface concentrations was investigated using hydrogen-deuterium (H/D) exchange in combination with mass spectrometry (HDX-MS) and differential scanning calorimetry (DSC). The combination of HDX-MS and DSC allows a full thermodynamic analysis of the lysozyme structure as both the enthalpy and the Gibbs free energy can be derived from the various measurements. Moreover, both HDX-MS and DSC provide information on the relative structural heterogeneity of lysozyme in the adsorbed state compared to that in solution. Results demonstrated that at high surface coverage, the structural stability of lysozyme was only marginally affected by adsorption to silica particles whereas the unfolding enthalpy decreased by more than 10%, meaning that the entropy of lysozyme increased with a similar value upon adsorption. Furthermore, the structural heterogeneity increased considerably. At lower surface concentrations, the structural heterogeneity increased further whereas the enthalpy of unfolding decreased. Further analyses of the HDX-MS experiments clearly indicated that folding/unfolding of lysozyme occurs through a two-domain process. These two domains had a similar amount of structural elements and a difference in stabilization energy of 8 kJ/mol, regardless if lysozyme was in solution or adsorbed to silica.     

Molecular packing of lysozyme,fibrinogen, and bovine serum albumin on hydrophilic and hydrophobic surfaces studied by infrared-visible sum frequency generation and fluorescence microscopy

Infrared-visible sum frequency generation (SFG) vibrational spectroscopy, in combination with fluorescence microscopy, was employed to investigate the surface structure of lysozyme, fibrinogen, and bovine serum albumin (BSA) adsorbed on hydrophilic silica and hydrophobic polystyrene as a function of protein concentration. Fluorescence microscopy shows that the relative amounts of protein adsorbed on hydrophilic and hydrophobic surfaces increase in proportion with the concentration of protein solutions. For a given bulk protein concentration, a larger amount of protein is adsorbed on hydrophobic polystyrene surfaces compared to hydrophilic silica surfaces. While lysozyme molecules adsorbed on silica surfaces yield relatively similar SFG spectra, regardless of the surface concentration, SFG spectra of fibrinogen and BSA adsorbed on silica surfaces exhibit concentration-dependent signal intensities and peak shapes. Quantitative SFG data analysis reveals that methyl groups in lysozyme adsorbed on hydrophilic surfaces show a concentration-independent orientation. However, methyl groups in BSA and fibrinogen become less tilted with respect to the surface normal with increasing protein concentration at the surface. On hydrophobic polystyrene surfaces, all proteins yield similar SFG spectra, which are different from those on hydrophilic surfaces. Although more protein molecules are present on hydrophobic surfaces, lower SFG signal intensity is observed, indicating that methyl groups in adsorbed proteins are more randomly oriented as compared to those on hydrophilic surfaces. SFG data also shows that the orientation and ordering of phenyl rings in the polystyrene surface is affected by protein adsorption, depending on the amount and type of proteins.     

Probing the 3-D Structure,Dynamics, and Stability of Bacterial Collagenase Collagen Binding Domain (apo- versus holo-) by Limited Proteolysis MALDI-TOF MS

Pairing limited proteolysis and matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS) to probe clostridial collagenase collagen binding domain (CBD) reveals the solution dynamics and stability of the protein, as these factors are crucial to CBD effectiveness as a drug-delivery vehicle. MS analysis of proteolytic digests indicates initial cleavage sites, thereby specifying the less stable and highly accessible regions of CBD. Modulation of protein structure and stability upon metal binding is shown through MS analysis of calcium-bound and cobalt-bound CBD proteolytic digests. Previously determined X-ray crystal structures illustrate that calcium binding induces secondary structure transformation in the highly mobile N-terminal arm and increases protein stability. MS-based detection of exposed residues confirms protein flexibility, accentuates N-terminal dynamics, and demonstrates increased global protein stability exported by calcium binding. Additionally, apo- and calcium-bound CBD proteolysis sites correlate well with crystallographic B-factors, accessibility, and enzyme specificity. MS-observed cleavage sites with no clear correlations are explained either by crystal contacts of the X-ray crystal structures or by observed differences between Molecules A and B in the X-ray crystal structures. The study newly reveals the absence of the βA strand and thus the very dynamic N-terminal linker, as corroborated by the solution X-ray scattering results. Cobalt binding has a regional effect on the solution phase stability of CBD, as limited proteolysis data implies the capture of an intermediate-CBD solution structure when cobalt is bound.     

Adsorption-induced conformational changes of proteins onto ceramic particles: differential scanning calorimetry and FTIR analysis

Three model proteins, bovine serum albumin, hen's egg lysozyme and bovine serum fibrinogen, were adsorbed from aqueous solution onto finely dispersed ceramic particles, namely different kinds of alumina and hydroxyapatite particles. The influence of adsorption on protein secondary structure was investigated. The FTIR spectroscopic findings were compared with the results of DSC measurements. In almost all cases it was found that adsorption results in destabilisation and structural loss of the bound protein. A decrease in transition enthalpy is correlated with a loss in alpha-helical structure, which seems to be the most sensitive structure on adsorption-induced rearrangements. A total collapse of structure in the adsorbed proteins was not determined on any ceramic surface. Some residual structure is always retained. Structural changes in the D- or E-domains of fibrinogen could be independently observed by two different calorimetric signals. The two techniques applied in the present study -- micro-DSC and FTIR spectroscopy -- can be concluded to provide complementary information on adsorption-induced structural changes on both the molecular (thermal stability, overall structure) and the sub-molecular level (secondary structure).     

Probing protein adsorption onto mercaptoundecanoic acid stabilized gold nanoparticles and surfaces by quartz crystal microbalance and zeta-potential measurements

The adsorption characteristics of three proteins [bovine serum albumin (BSA), myoglobin (Mb), and cytochrome c (CytC)] onto self-assembled monolayers of mercaptoundecanoic acid (MUA) on both gold nanoparticles (AuNP) and gold surfaces (Au) are described. The combination of quartz crystal microbalance measurements with dissipation (QCM-D) and pH titrations of the zeta-potential provide information on layer structure, surface coverage, and potential. All three proteins formed adsorption layers consisting of an irreversibly adsorbed fraction and a reversibly adsorbed fraction. BSA showed the highest affinity for the MUA/Au, forming an irreversibly adsorbed rigid monolayer with a side-down orientation and packing close to that expected in the jamming limit. In addition, BSA showed a large change in the adsorbed mass due to reversibly bound protein. The data indicate that the irreversibly adsorbed fraction of CytC is a monolayer structure, whereas the irreversibly adsorbed Mb is present in form of a bilayer. The observation of stable BSA complexes on MUA/AuNPs at the isoelectric point by zeta-potential measurements demonstrates that BSA can sterically stabilize MUA/AuNP. On the other hand, MUA/AuNP coated with either Mb or CytC formed a reversible flocculated state at the isoelectric point. The colloidal stability differences may be correlated with weaker binding in the reversibly bound overlayer in the case of Mb and CytC as compared to BSA.     

Structure, stability, and activity of myoglobin adsorbed onto phosphate-grafted zirconia nanoparticles

The adsorption of myoglobin (Mb) onto phosphate grafted-zirconia (ZrO2-P) nanoparticles was studied in terms of conformational studies and thermal stability, determined by circular dichroism (CD), differential scanning calorimetry (DSC), and atomic force microscopy (AFM). The changes in protein structure have been correlated with the catalytic activity of free and adsorbed Mb. CD and DSC studies indicate marked rearrangements in Mb structure upon adsorption onto phosphate-grafted zirconia nanoparticles. These structural rearrangements of Mb could be responsible for the loss of catalytic activity observed for the adsorbed Mb. In particular, the conformational changes due to the adsorption process induced a reduction of kcat and KM. AFM measurements indicate that the interaction with the grafted-zirconia nanoparticles also affects the morphology of the bound protein, inducing the nucleation of prefibrillar-like aggregates.     

Structure, Stability, and Activity of Adsorbed Enzymes

A proteolytic enzyme, α-chymotrypsin, and a lipolytic enzyme, cutinase, were adsorbed from aqueous solution onto a hydrophobic Teflon surface and a hydrophilic silica surface. We investigated the influence of adsorption on the structure, the structure thermal stability and the activity of these enzymes. Probing the protein structure by circular dichroism spectroscopy indicates that Teflon promotes the formation of helical structure in α-chymotrypsin, but the reverse effect is found with cutinase. The perturbed protein structures on Teflon are remarkably stable, showing no heat-induced structural transitions up to 100°C, as monitored by differential scanning calorimetry. Contact with the hydrophilic silica surface leads to a loss in the helix content of both proteins. Differential scanning calorimetry points to a heterogeneous population of adsorbed protein molecules with respect to their conformational states. The fraction of the native-like conformation in the adsorbed layer increases with increasing coverage of the silica surface by the proteins. The specific enzymatic activity in the adsorbed state qualitatively correlates with the fraction of proteins in the native-like conformation.     

Adsorption of plasmid DNA to a natural organic matter-coated silica surface: kinetics, conformation, and reversibility

A quartz crystal microbalance with dissipation (QCM-D) has been used to determine the adsorption rate of ampicillin-resistant linear and supercoiled plasmid DNA onto a silica surface coated with natural organic matter (NOM). The structure of the resulting adsorbed DNA layer was determined by analyzing the viscoelastic properties of the adsorbed DNA layers as they formed and were then exposed to solutions of different ionic composition. The QCM-D data were complemented by dynamic light scattering measurements of diffusion coefficients of the DNA molecules as a function of solution ionic composition. The obtained results suggest that electrostatic interactions control the adsorption and structural changes of the adsorbed plasmid DNA on the NOM-coated silica surface. The adsorption of DNA molecules to the NOM layer took place at moderately high monovalent (sodium) electrolyte concentrations. A sharp decrease in solution ionic strength did not result in the release of the adsorbed DNA, indicating that DNA adsorption on the NOM-coated silica surface is irreversible under the studied solution conditions. However, the decrease in electrolyte concentration influenced the structure of the adsorbed layer, causing the adsorbed DNA to adopt a less compact conformation. The linear and supercoiled DNA had similar adsorption rates, but the linear DNA formed a thicker and less compact adsorbed layer than the supercoiled DNA.     

Conformational change of adsorbed and desorbed bovine serum albumin on nano-sized magnetic particles

Adsorptions of bovine serum albumin (BSA) on nano-sized magnetic particles with and without the presence of carbodiimide were studied. Desorption of BSA from magnetic particles were carried out in either NaOH or Na₂HPO₄ solutions. The structures of native BSA, adsorbed BSA on magnetic particles, and desorbed BSA were studied by several methods, circular dichroism (CD), fluorescence spectroscopy and differential scanning calorimetry (DSC). The magnitude of conformational changes of protein was determined by calculating the α-helix content from the circular dichroism (CD) spectra and by evaluating fluorescence spectrum and DSC thermograms. Adsorbed BSA on magnetic particles shows no thermal transition with respect to the native BSA. The structural change of BSA when desorbed by Na₂HPO₄ solution is much smaller in comparison to that when desorbed by NaOH solution. Hence, this indicates that BSA could be desorbed from nano-sized magnetic particles using Na₂HPO₄ without much conformational change.     

Localized changes in the structural stability of myoglobin upon adsorption onto silica particles,as studied with hydrogen/deuterium exchange mass spectrometry

A new method is presented for monitoring the conformational stability of various parts of a protein that is physically adsorbed onto nanometer-sized silica particles. The method employs hydrogen/deuterium (H/D) exchange of amide hydrogens, a process that is extremely sensitive to structural features of proteins. The resulting mass increase is analyzed with Fourier transform ion cyclotron resonance (FTICR) mass spectrometry. Higher structural specificity is obtained by enzymatically cleaving the adsorbed proteins prior to mass spectrometric analysis. The mass increases of four peptic fragments of myoglobin are followed as a function of the H/D exchange time. The four peptic fragments cover 90% of the myoglobin structure. Two of the peptic fragments, located in the middle of the myoglobin sequence and close to the heme group, do not show any adsorption-induced changes in their structural stability, whereas the more stable C- and N-terminal fragments are destabilized. Interestingly, for the N-terminal fragment, comprising residues 1-29, two distinct and equally large conformational populations are observed. One of these populations has a stability similar to that in solution (-23 kJ/mol), whereas the other population is highly destabilized upon adsorption (-11 kJ/mol).     

Kinetic modeling of aldehyde adsorption rates on bare and aminopropylsilyl-modified silica gels by ultra-rapid-scanning fourier transform infrared spectrometry

Enhancements of a model capable of precisely defining rates of adsorption in terms of a Langmuir isotherm and determined from infrared and pressure data collected in the millisecond time regime are described in detail. Rates of adsorption are determined for formaldehyde and acetaldehyde exposed to bare and aminopropylsilyl-derivatized silica gel. The model fits the collected data by varying the number of adsorption sites and the adsorption and desorption rate constants and determines the best fit based on the measured IR absorbance, partial pressure, exposure backpressure, number of adsorption sites, and time. The rate of adsorption onto irregular-shaped silica gel was faster than the rate onto the corresponding spherical silica gel. Formaldehyde was adsorbed more efficiently than acetaldehyde on APS silica gel than on bare silica gel, whereas acetaldehyde was adsorbed more efficiently than formaldehyde on underivatized silica, indicating the possibility that formaldehyde is adsorbed through the formation of a Schiff base.     

Evaluation of the adsorption affinity of proteins to calcium hydroxyapatites by desorption and pre-adsorption methods

The adsorption affinity of bovine serum albumin (BSA) and lysozyme (LSZ) to calcium hydroxyapatite (CaHAP) was evaluated by desorption and two step adsorption methods. These experiments were carried out at 15°C in a 1×10⁻⁴ mol dm⁻³ KCl solution of pH 6.0. BSA molecules were scarcely desorbed, exhibiting an irreversible adsorption of BSA, though LSZ slightly desorbed. This result supports our previous findings that LSZ adsorbs weakly onto phosphate ions exposed on ac or bc faces of CaHAP while BSA adsorbs strongly onto positively charged sites on ac or bc faces of CaHAP. The amount of adsorbed LSZ was markedly increased by the pre-adsorption of BSA, where LSZ was adsorbed onto BSA-covered CaHAP. On the other hand, the amount of adsorbed BSA was not changed by the pre-adsorption of LSZ. In both pre-adsorption systems it was confirmed by an HPLC method that no protein molecule pre-adsorbed was desorbed after the post-adsorption procedure. Therefore, it was interpreted that the enhancement of adsorption of positively charged LSZ is induced by an electrostatic attractive force through pre-adsorption of negatively charged BSA molecules with a high coverage. However, since the coverage of LSZ onto CaHAP is considerably low, no stimulation of BSA adsorption occurred on the LSZ-covered surface. The formation of double protein adsorbed layers consisting of pre- and post-adsorbed proteins was proposed.     

Adsorption of Bovine Serum Albumin onto Polystyrene Latex Particles Bearing Saccharidic Moieties

The adsorption of bovine serum albumin (BSA) onto polystyrene latexes bearing various amounts of sugar moieties has been investigated as a function of pH and ionic strength and the results were compared to those for bare polystyrene latexes having negative surface charges. The functionalized latexes were produced by seeded copolymerization of (0.3 μm) liposaccharidic monomer onto polystyrene particles obtained by soap-free emulsion polymerization of styrene using potassium persulfate as initiator. At first, the electrophoretic mobility behavior of the various latexes was examined as a function of pH: a significant decrease was observed in the case of saccharide-containing latex particles compared to the bare particles. The adsorption of BSA onto these latexes exhibited a reduced amount of adsorbed BSA for those latex particles bearing saccharide groups. This adsorbed amount depends on the yield of saccharidic monomer incorporated onto the surfaces of the latex particles.     

Effect of polyethylene oxide on the viscosity of dispersions of charged silica particles: interplay between rheology, adsorption, and surface charge

In this study a systematic investigation on the adsorption of polyethylene oxide (PEO) onto the surface of silica particles and the viscosity behavior of concentrated dispersions of silica particles with adsorbed PEO has been performed. The variation of shear viscosity with the adsorbed layer density, concentration of free polymer in the solution (depletion forces), polymer molecular weight, and adsorbed layer thickness at different salt concentrations (range of the electrostatic repulsion between particles) is presented and discussed. Adsorption and rheological studies were performed on suspensions of silica particles dispersed in solutions of 10⁻² M and 10⁻⁴ M NaNO₃ containing PEO of molecular weights 7,500 and 18,500 of different concentrations. Adsorption measurements gave evidence of a primary plateau in the adsorption density of 7,500 MW PEO at an electrolyte concentration of 10⁻² M NaNO₃. Results indicate that the range of the electrostatic repulsion between the suspended particles affects both adsorption density of the polymer onto the surface of the particles and the viscosity behavior of the system. The adsorbed layer thickness was estimated from the values of zeta potential in the presence and absence of the polymer and was found to decrease with decreasing the range of the electrostatic repulsive forces between the particles. Experimental results show that even though there is a direct relation between the viscosity of the suspension and the adsorption density of the polymer onto the surface of the particles, variation of viscosity with adsorption density, equilibrium concentration of the polymer, and range of the electrostatic repulsion cannot be explained just in term of the effective volume fraction of the particles and needs to be further investigated. Received: 15 February 2000/Accepted: 26 June 2000     

Adsorption of immunogamma globulin onto various synthetic calcium hydroxyapatite particles

This paper presents data on adsorption of immunogamma globulin (IgG) onto synthetic rodlike calcium hydroxyapatite particles (CaHaps) with various particle lengths and calcium/phosphate (Ca/P) atomic ratios ranging from 1.54 to 1.65 and compares the obtained results to those of acidic (bovine serum albumin, BSA), neutral (myoglobin, MGB), and basic (lysozyme, LSZ) proteins reported before. The effect of electrolyte concentration on IgG adsorption was also examined. The initial rate of IgG adsorption was similar to that of BSA and was slower than that of MGB and LSZ. This fact was interpreted by the difference in the structural stability and molecular weight of these proteins. The isotherms of IgG adsorption onto the CaHap particles were of pseudo-Langmuir type. The saturated amount of adsorbed IgG values (nsIgG) for the particles with mean particle length less than 70 nm decreased with increasing Ca/P ratio. The adsorption behavior of IgG molecules was very similar to that of basic LSZ, though IgG has zero net charge. The nsIgG value was increased with increased mean particle length of CaHaps; the relationship was less significant than that for BSA but similar to those for MGB and LSZ. The similar adsorption behavior of IgG and LSZ suggested that the Fab parts of IgG molecules preferentially adsorb onto CaHap to provide the reversed Y-shaped conformation of IgG. The change of the adsorption mode of IgG molecules from the reversed Y-shaped conformation to side-on by "spreading" the Fc part of IgG molecules onto the particle surface over a longer adsorption time was suggested. The nsIgG value was increased with increasing electrolyte concentration by screening the intra- and intermolecular electrostatic interactions of proteins.     

2709碱性蛋白酶水解BSA蛋白肽谱变化的研究

以2709碱性蛋白酶酶解牛血清白蛋白为研究对象,采用液相色谱-飞行时间质谱联用分析方法和位点非特异性酶切肽谱鉴定方法,分析水解过程中肽谱的动态变化。蛋白电泳分析结果显示,2709碱性蛋白酶在0.1%的添加比例条件下,0.5 h内可将全部蛋白降解,表明其具有极强的水解能力。肽谱分析结果显示,该酶酶解BSA蛋白过程中肽谱变化复杂多样,不同序列多肽具有不同的动态变化特征。酶切位点分析结果显示,2709碱性蛋白酶几乎能在所有种类的氨基酸位点发生酶切,但酶切的频率并不相同,这表明该酶在水解位点上具有宽泛的选择性和一定的倾向性,其中在肽键C端氨基酸种类的选择上具有明显的亮氨酸倾向性。该文可为研究其他工业蛋白酶水解肽谱的规律提供借鉴,并有助于提高我国工业蛋白酶制剂的应用水平和蛋白质加工水平。     

Formation of a supramolecular gel between alpha-cyclodextrin and free and adsorbed PEO on the surface of colloidal silica: effect of temperature, solvent, and particle size

Aqueous solutions of alpha-cyclodextrin (alpha-CD) complex spontaneously with poly(ethylene oxide) (PEO), forming a supramolecular structure known as pseudopolyrotaxane. We have studied the formation of the complex obtained from the threading of alpha-CD onto PEO, both free in solution and adsorbed on colloidal silica. The kinetics of the reaction were studied by gravimetric methods and determined as a function of temperature and solvent composition for the PEO free in solution. PEO was then adsorbed on the surface of colloidal silica particles, and the monomers were displaced by systematically varying the degree of complexation, the concentration of particles, and the molecular weight of the polymer. The effect of the size of the silica particles on the yield of the reaction was also studied. With the adsorbed PEO, the complexation was found to be partial and to take place from the tails of the polymer. The formation of a gel network containing silica at high degrees of complexation was observed. Small-angle X-ray and neutron scattering experiments were performed to study the configuration of the polymeric chains and confirmed the partial desorption of the polymer from the surface of the silica upon complexation.     

牛血清蛋白对二硬脂酰基磷脂酰乙醇胺单层膜结构的影响

利用Langmuir-Blodgett(LB)技术结合原子力显微镜(AFM),研究了牛血清蛋白(BSA)在气/液界面上对二硬脂酰基磷脂酰乙醇胺(DSPE)单层膜结构的影响.通过改变亚相的pH值和BSA浓度,获得了不同条件下DSPE单层膜的等温线、吸附曲线和压缩循环曲线等.实验结果表明,亚相中BSA的存在对DSPE单层膜的压缩性、稳定性以及相变行为产生了较大的影响.吸附动力学结果表明,DSPE单层膜对BSA分子的吸附量存在一定的阈值,且该阈值的大小与亚相pH值相关.通过分析实验数据可知,当亚相pH=3时,BSA的疏水残基几乎全部暴露在外面,2种分子之间的相互作用最强;而pH=7时,BSA仅有少量的疏水残基暴露在外面,2种分子之间的相互作用最弱.原子力显微镜观测到的单层膜形态变化特点与曲线分析结果一致.该研究为了解牛血清蛋白与磷脂分子之间的相互作用机理提供了重要的实验基础和理论依据.     

纳米SiO_2粒子表面静电吸附引发剂的活性研究

引发剂2,2′-偶氮二(2-脒基丙烷)二氢氯化物(AIBA)可通过静电作用而高效稳定地吸附到在弱碱性水相中均匀稳定分散的纳米SiO2粒子表面.对这些吸附引发剂的热分解行为、在纳米SiO2粒子表面原位引发甲基丙烯酸甲酯(MMA)乳液聚合的动力学和纳米SiO2粒子表面的聚合锚固情况进行了研究.发现非吸附和吸附引发剂的热分解活化能分别为148.5kJ/mol和124.5kJ/mol,70℃时半衰期分别为12.6h和5.2h,说明在相同状态下静电吸附引发剂具有比非吸附引发剂更高的活性,因而在原位乳液聚合中表现出比常规乳液聚合更短的诱导期和更高的聚合速率.更关键的是,具有较高活性的吸附引发剂高效稳定地吸附在SiO2粒子表面,可以使聚合反应总是优先发生于纳米SiO2粒子表面,从而可以更好地促进单体在纳米SiO2粒子表面的锚固,最终有效提高无机/有机相间的复合程度.     

The Adsorption-Desorption Cycle. Reversibility of the BSA-Silica System

The reversibility of the adsorption-desorption cycle was established by comparing the thermostability (determined by differential scanning calorimetry) and secondary structure (obtained by circular dichroism spectroscopy) of BSA before adsorption, adsorbed on, and exchanged from silica particles. Circular dichroism was also measured as a function of temperature at a given wavelength. Adsorbed BSA presents a higher thermostability and a lower alpha-helix content than the native protein while it regains its conformation when released from the surface back into the solution; the homomolecular exchange is reversible.The changes in ellipticity (at a given wavelength) as a function of the temperature show that the thermal denaturation of native, adsorbed, and exchanged BSA proceeds in two steps. For the dissolved protein, the first step up to 50 degrees C involves a slight change in the structure while in the 50-90 degrees C temperature range the actual unfolding takes place. For the adsorbed BSA, the first step proceeds up to 60 degrees C and includes some intermolecular association between the adsorbed protein molecules, which may be responsible for the increased thermostability. The unfolding occurs in the 60-90 degrees C range; it is less cooperative and involves a lower enthalpy change than the native protein. Adsorbed BSA presents the same secondary structure as that observed for dissolved BSA that has passed a heating-cooling cycle. Copyright 2001 Academic Press.