偶氮苯衍生物自组装单分子膜中的分子取响

利用反射红外光谱研究了金表面一系列具有不同碳链长度的偶氮苯巯基衍生物的自组装单分子膜.通过对比各向同性样品的透射谱和单分子膜的反射谱中各个吸收峰强度,定量地研究了分子中各部分的取向与分子结构的关系.我们分别提出了烷基链和偶氮基团取向计算的方法,利用该方法成功地求得了分子中各部分在膜的倾角.结果显示,当分子中烷基链长度增大时,碳链和偶氮苯基团相对于法线的倾斜逐渐加剧.这种倾角的变化归因于分子中碳链间范德华引力增大时,引起分子逐渐倾斜以达到最佳的范德华接触.同时研究发现,烷基链和偶氮基团受碳长度变化的影响并不相同.当分子中亚甲基数目增多时,烷基链的倾角迅速增大而偶氮苯倾角的增大则相对缓慢,这反映了它们在空间需求和本身刚性上的不同。     

新型偶氮苯硫醇衍生物自组装膜的制备与结构表征

自组装单分子膜(ＳＡＭｓ)是近年来引起广泛注意的一种稳定的、二维有序的、致密的有机超薄膜体系,由于其优越的性能,在润滑、吸附、防腐、电化学及微电子等领域中显示出广阔的应用前景[1～4].自组装单分子膜是使用含有各种活性官能团(如-ＣＯＯＨ,-ＳＨ,-Ｓ-Ｓ-,-ＯＨ,-ＣＮ等)的分子,以化学键的形式与相应的基底(如Ａｕ,Ａｇ,Ｃｕ,Ｐｔ,Ｓｉ,Ｍｉｃａ等)相互作用从而自发地形成自组装膜.根据不同的研究或应用目的合理设计组装分子的结构及基底表面,从而得到具有所需功能的自组装单分子膜是近年来界面科学和材料科学等领域研究的热点之一.…     

新型偶氮苯硫醇衍生物自组装膜的制备与结构表征

Self Assembled Monolayers(SAMs) of a series of mercapto contained azobenzene derivatives with the structure of CnH2n+1AzoO(CH 2)mSH (where n =4,6,8,10,12; with m =3,5 respectively) were prepared and characterized. Wettability measurement of water on the SAMs demonstrates that molecular packing density in the monolayers increases while the alkyl chain in the molecules is lengthened. Both the n and m values have similar contribution to the wetting property of SAMs. The RA IR spectra reveal that the alkyl chains in the SAMs tilt away dramatically from the surface normal direction with the increase in their length. However, the orientation of azobenzene moiety is found to be influenced slightly by the alkyl chain length, which is due to the tenderness of the molecule.     

喹啉衍生物自组装单分子膜的制备与结构

由于自组装单分子膜（SeifAssewhledMonolnyer,SAM）技术提供了在分子水平上构造理想界面的方便手段,而且所得到的膜具有优于传统m膜的均一性与稳定性,所以近年来SAM成为研究的热点．大量的研究工作表明SAM在润滑、防腐、催化老u蚀、电子转移反应研究、分子器件、非线性光学等众多领域都有广泛的应用前景［‘］．在以前的工作中我们曾报导了含酸胺键［’］、偶氮苯基团”,‘］等链内取代基的SAM的电化学与红外研究的结果,并采用化学力显微镜（CF）技术对末端为竣基的SAM进行了力滴定研究l’1．由于受合成等因素的制约,目前国…     

末端碳链长度对偶氮苯自组装膜结构的影响

The end-group dominated molecular orientation in the azobenzene self-assembled monolayers (SAMs), CnAzoC2SH (n=1-4), on gold was evaluated for the first time by grazing incidence reflection absorption FTIR spectroscopy (RA-FTIR). All these azobenzene SAMs have highly-organized and closely-parked structures, with the molecule tilting away gradually from surface normal direction with the increase of end group alkyl length.     

偶氮苯衍生物自组装膜特征电化学的模拟

讨论了偶氮苯衍生物自组装膜的电极反应速率常数对其表面覆盖度的依赖关系的机理,建立了相应的数学模型,进一步编写计算程序对这种电化学行为做了模拟讨论。     

偶氮苯自组装单分子膜中长程电子转移机理

利用自组装技术在金电极表面构造了具有不同前端健长度偶氮苯功能化的单分子膜体系：Au／S（CH2）nNHCO-N＝N-OCH2CH3（n＝2，3，4，6）．研究结果表明，仍氮苯到金电极的表现电子转移速率随它们之间的距离长度的增加而呈指数性的下降趋势．基于Marcus电子隧穿理论，得到了此自组装膜体系的长程电子隧穿系数ρ＝（1．35±0．2）／CH2在和可逆电活性分子自组装膜体系及理论计算相比较的基础上，从偶氮苯分子自组装膜结构与电子转移过程的关系角度对这一结果进行了分析和说明．     

偶氮苯衍生物自组装膜的表征及组装动力学

报导了4-正辛基-4′-（3－巯基丙氧基）偶氮苯（简称C8AzoC3）自组装膜（Self-AssembledMonolnyersSAMs）的表征及其自组装成膜动力学，接触角滴定、原子力显微镜（AFM）及电化学的实验结果表明，C8AzoC3分子在金表面自组装形成致密有序的流水性单分子膜，并且在电极上没有明显的电化学响应．通过控制组装时间，考察了偶氮苯自组装形成单分子膜的动力学过程，从接触角和电化学数据得到组装过程的速率常数kad为（1.2±0.2）×103mol-1·dm3·s－1；依据不同组装时间形成的自组装膜的特征循环伏安行为，提出了C8AzoC3分子在金表面自组装过程的动态模型．     

偶氮苯硫醇衍生物自组装成膜过程考察

The formation kinetics of the self-assembled monolayer (SAM) of an azobenzenealkanethiol, denoted as AzoC2SH on surface was studied using electrochemical techniques, and the monolayers prepared at different assembly times and concentration were also investigated. A two-step adsorption kinetics has been confirmed: the fast adsorption process and the following long-term reorganization. The equilibrium constant(K)for the adsorption and the interaction factor between adsorbate-adsorbate molecules (δ) were evaluated based on the Frumkin isotherm and determined to be (3. 17±0. 13)× 106 mol•L(-1) and -0.34±0.04, respectively. The Gibbs free energy (G)of SAM was determined to be -(37. 07±0. 13)kJ•mol(-1).     

Reversible wettability of optothermal responsively perfluoroalkyl azobenzene self-assembled monolayers

In this study, two perfluoroalkyl azobenzene trichlorosilanes were synthesized and then characterized by Fourier transform infrared spectroscopy (FT-IR), ¹H NMR, and ¹⁹F NMR. Subsequently, these fluorine containing trichlorosilanes were applied to form self-assembled monolayers (SAMs) on silicon substrates by the method of chemical deposition in liquid phase. The optothermal responsively isomerization of the azobenzene was achieved via UV irradiation and heat treatment. The surface structures of the SAMs were investigated by X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDS), and atomic force microscopy (AFM). The results showed that the thermal migration of the terminal fluoroalkyl groups promoted the isomerization of the azo-groups. Moreover, the reversible contact angles of the SAMs demonstrated a good reversibility of surface wettability, which was consistent with the optothermal responsive isomerization of the azo-groups.     

Formation of alkane‐phosphonic acid self‐assembled monolayers on alumina: an in situ SPR study

The formation process of n‐alkane phosphonic acid CH₃ (CH₂)_n?1 PO(OH)₂ (n = 10,12,14,18) self‐assembled monolayers (SAMs), deposited from ethanol solutions on aluminum oxide, has been monitored in situ using surface plasmon resonance (SPR) spectroscopy. In addition, the two‐solvent approach is used to obtain both film thickness and refractive index of the fully formed adsorbed layers. A densely packed adsorbed layer is formed only for the longest molecules with n = 18. The chain length and solution concentration dependence of formation kinetics are studied, and the existence of two distinct kinetic steps is revealed. Fittings of the experimental results with various kinetic models are performed. Our analysis suggests that during the first kinetic step, a transition from a lying‐down to a standing‐up phase takes place, and the growth of this standing‐up phase is governed by second‐order kinetics. The second slow kinetic step is described by a modified first‐order Langmuir law. Copyright © 2009 John Wiley & Sons, Ltd.     

Mechanisms of secondary ion emission from self‐assembled monolayers and multilayers

Alkanethiol self‐assembled monolayers/multilayers (SAMs) have been applied as model organic systems with which to investigate secondary ion formation and emission processes during kiloelectronvolt ion bombardment. Self‐assembled monolayer and multilayer films of 11‐mercaptoundecanoic acid capped with 1‐dodecanethiol were prepared on gold‐coated substrates. Samples with varying number of thiolate layers were studied using static secondary ion mass spectrometry to investigate the origin of molecular secondary ions and the influence of surface chemistry and structure. The nature of the thiolate bonding affects the type and abundance of the observed ions. The intensity of atomic and cluster ions derived from the substrate decreases exponentially with increasing number of thiolate overlayers because of losses in transmission through the organic overlayers. Intact molecular and cluster ions can escape from >100 Å below the surface of these structures. The variation of molecular‐ion yields with multilayer thickness suggests that a significant proportion of molecular ions originate from subsurface thiolate layers. The detection of ions comprised species from the substrate or bottom of the multilayer associated with species from the top layer supports the view that chemical association at or near the surface is a viable mechanism of formation for molecular secondary ions. Copyright © 2005 John Wiley & Sons, Ltd.     

Spectroelectrochemical detection of phenothiazine and phenoxazine derivatives covalently bound to self-assembled cystamine monolayers

The phenothiazine derivatives, Toluidine Blue O and Azur A, and the phenoxazine derivative Nile Blue were bound covalently to self-assembled cystamine monolayers chemisorbed on gold electrodes by derivatization of the surface amino groups with two different bifunctional spacers: terephthaloyl chloride and 1,6-hexamethylene-diisocyanate.The formation of the amido- and urea-derivatives of the parent compounds after covalent immobilization induces a shift of their redox potentials towards more positive values which can easily be detected by cyclic voltammetry.UV-Vis difference spectroelectrochemistry has been used to characterize the electroactive species immobilized onto transparent gold electrode surfaces in both oxidation states. In every case, the oxidized-minus-reduced (and reduced-minus-oxidized) difference spectra of the immobilized redox species show a shift of the UV maxima towards longer wavelengths and a shift of the Vis maximum towards shorter wavelengths when compared with their parent compounds. Each redox species showed different optical characteristics depending on the spacer used for immobilization.For phenothiazine derivatives immobilized with 1,6-hexamethylene di-isocyanate the total surface coverages obtained by optical methods were close to those obtained by cyclic voltammetry. However, for the same derivatives immobilized with terephthaloyl chloride, and for Nile Blue, independently of the spacer used, higher surface coverages were found by optical methods than by cyclic voltammetry.     

Electroactive self-assembled monolayers of unique geometric structures by using rigid norbornylogous bridges

Herein, we describe the synthesis of straight (S) and L-shaped (L) norbornylogous bridges (NBs) with an anthraquinone moiety at the distal end as the redox-active head group and two thiol feet at the proximal end, by which the molecules assemble on gold surfaces. The NB molecules were shown to form self-assembled monolayers (SAMs) with a well-behaved surface redox process. The SAMs were characterized by using in situ IR spectroscopy, cyclic voltammetry, scanning tunnelling microscopy and electrochemical impedance spectroscopy. The surface selection rules associated with the IR band intensities allowed the estimation of the position of the anthraquinone moiety with respect to the surface and the tilt of the bridge with respect to the surface normal, both in pure and diluted monolayers. It is shown that the S- and L-NBs hold the plane of the anthraquinone moiety close to the surface normal or the surface tangent, respectively. Neither NB molecule changes its orientation if spaced by diluents on the surface. The difference in the structure of the S- and L-NB SAMs provides a suitable framework for the investigation of factors that govern electron transfer of anthraquinone moieties across self-assembled monolayers with limited structural ambiguity, as compared with the commonly used structurally flexible alkanethiol monolayers.     

Oxidation states and CO ligand exchange kinetics in a self-assembled monolayer of a triruthenium cluster studied by in situ infrared spectroscopy

Oxidation states and CO ligand exchange kinetics in a self-assembled monolayer (SAM) of an oxo-centered triruthenium cluster [Ru(3)(mu3-O)(mu-CH3COO)6(CO)(L1)(L2)] (L1 = [(NC5H4)CH2NHC(O)(CH2)10S-]2, L2 = 4-methylpyridine) have been extensively investigated on the surface of a gold electrode in aqueous and nonaqueous solutions. The SAM exhibits three consecutive one-electron transfers and four oxidation states, which have been characterized by electrochemistry, in situ infrared spectroscopy, and in situ sum frequency generation (SFG) vibrational spectroscopy measurements. The original electron-localized state of the Ru cluster center was changed to electron delocalization states by oxidation or reduction of the central Ru ions. These changes are revealed by the IR absorptions of the CO ligand and the bridging acetate ligands of the triruthenium cluster in the SAM. The IR absorptions of the two kinds of ligands are strongly dependent on the oxidation state of the Ru cluster center. One-electron oxidation of the central Ru ion in the SAM triggers a CO ligand liberation process. Solvent molecules may then occupy the CO site to result in a CO-free SAM. One-electron reduction of this CO-free SAM in a CO-saturated solution leads to re-coordination of the CO ligand into the SAM. Both processes can be precisely controlled by tuning the electrode potential. The kinetics of the CO exchange cycle in the SAM, including liberation and coordination, has been investigated by in situ IR and SFG measurements for the first time. The CO exchange cycle is significantly dependent on the temperature. The reaction rate greatly decreases with decreasing solution temperature, which is an important factor in the CO ligand exchange process. The activation energies of both CO liberation and coordination have been evaluated from the reaction rate constants obtained at various temperatures.     

Exchange of Methyl‐ and Azobenzene‐Terminated Alkanethiols on Polycrystalline Gold Studied by Tip‐Enhanced Raman Mapping

Mixed thiol self‐assembled monolayers (SAMs) presenting methyl and azobenzene head groups were prepared by chemical substitution from the original single‐component n‐decanethiol or [4‐(phenylazo)phenoxy]hexane‐1‐thiol SAMs on polycrystalline gold substrates. Static contact‐angle measurements were carried out to confirm a change in the hydrophobicity of the functionalized surfaces following the exchange reaction. The mixed SAMs presented contact‐angle values between those of the more hydrophobic n‐decanethiol and the more hydrophilic [4‐(phenylazo)phenoxy]hexane‐1‐thiol single‐component SAMs. By means of tip‐enhanced Raman spectroscopy (TERS) mapping experiments, it was possible to highlight that molecular replacement takes place easily and first at grain boundaries: for two different mixed SAM compositions, TERS point‐by‐point maps with <50 nm step sizes showed different spectral signatures in correspondence to the grain boundaries. An example of the substitution extending beyond grain boundaries and affecting flat areas of the gold surface is also shown.