Structure-toxicity relationships of thiono and seleno phosphoramidate compounds: new type of acetylcholinesterase inhibitors

Novel thiono and seleno phosphoramidate compounds with the general formula (X)(Y)P(C₆H₅)₂; (X = NMe₂ & Y = S, 1a; X = NEt₂ & Y = S, 2a; X = NMe(CH₂Ph) & Y = S, 3a; X = NH(CH₂Ph) & Y = S, 4a; X = NEt(CH₂Ph) & Y = S, 5a; X = N(C(Me)₃) (CH₂Ph) & Y = S, 6a; X = N(CH₂Ph)₂ & Y = S, 7a; X = NMe₂ & Y = Se, 1b; X = NEt₂ & Y = Se, 2b; X = NMe(CH₂Ph) & Y = Se, 3b; X = NH (CH₂Ph) & Y = Se, 4b; X = NEt(CH₂Ph) & Y = Se, 5b; X = N(C(Me)₃)(CH₂Ph) & Y = Se, 6b and X = N(CH₂Ph)₂ & Y = Se, 7b) were prepared and characterized by ¹H, ³¹P and ¹³C NMR and IR spectroscopy and elemental analysis. ³¹P chemical shift of thiono and seleno derivatives didn’t show significant different because of their little difference in electronegativity sulfur and selenium. Hydrophobic parameter of compounds was determined by measurement of octanol-water partition coefficient by shake-flask technique. Determination of human erythrocyte acetylcholinesterase (hAChE) activity was carried out according to the Ellman’s modified kinetic method. IC₅₀ values of the selected thiono and seleno compounds varied from 3.4 to 0.11 and 9.9 to 5.1 mM, respectively. The seleno compounds show lower affinities for hAChE relative to the thino compounds. These results demonstrate that hydrophobic and electronic factors of the organophosphorus compounds play a key role on the inhibitory potency.     

Mechanical and electronic properties of endofullerene Ne@C60 studied via structure distortions

Elastic, strength, electronic properties and vibrational spectra of Ne@C₆₀ (I _h) in its ground electronic state (X ¹A_g) were investigated with density functional theory at B3PW91/6-31G level via structure distortions. The elastic properties were obtained from the potential energy curves (PECs) in all of the five independent distortional directions of the molecule with symmetries of 1. D _5d, 2. D _3d, 3. D _2h, 4. C _2h(1) and 5. C _2h(2). PECs were examined where the structure of Ne@C₆₀ was destroyed. The necessary energies to destroy the structure were thus obtained, which illuminated the stability of Ne@C₆₀. PECs were found to be anisotropic and were accurately fitted to polynomials. Elongations in the direction of D _5d and compression in D _2h encountered potential energy surface cross-linkages, which might be considered as a single electron pump for further application in the design of single electron devices. Time-dependent B3PW91/6-31G analysis predicted significant electronic spectra changes associated with structure distortions. Similarities and differences of the properties were compared with those in C₆₀ and He@C₆₀.     

Effect of Zr concentration on the mechanical and thermodynamic properties of NbIr3 intermetallic compounds from theoretical estimations

ABSTRACT

The iridium is an important metal which has excellent resistance to corrosion at high temperature. L1₂ intermetallic compounds i.e. Ir₃Nb and Ir₃Zr, with similar lattice parameters are ideal for working at high temperature. They are fully soluble due to their low lattice misfit. A first-principle investigation into the effect of doping Zr with different concentrations on the electronic structure, mechanical and thermodynamic properties of NbIr₃ has been studied to prompt the development of novel high-temperature materials. Nine Zr_xNb_8?xIr₂₄ compounds are carefully considered. The results show that adding Zr into these compounds can strengthen their structural stability and ductility. Nevertheless, it reduces the elastic modulus and elastic stiffness. Simultaneously, with the increase of Zr content, the thermodynamic properties of these compounds decrease. It is also found that the changes of elastic modulus are mainly attributed to the variations of bonds in these compounds.     

Magnetic properties of TbMn6Sn6-xGax (x=0.0－1.2) compounds

Effects of Ga substitution for Sn on the structure and magnetic properties of TbMn₆Sn_6-xGa_x (x=0.0－1.2) compounds have been investigated by means of x-ray diffraction, magnetization measurement and ¹¹⁹Sn M?ssbauer spectroscopy. The substitution of Ga for Sn results in a decrease in lattice constants and unit-cell volumes. The magnetic ordering temperature decreases monotonically with increasing Ga content from 423 K for x=0.0 to 390 K for x=1.2. At room temperature, the easy magnetization direction changes from the c-axis to the ab-plane. This variation implies that the substitution of Ga for Sn leads to a decrease in the c-axis anisotropy of the Tb sublattice. An increase in the non-magnetic Ga concentration results in a monotonic decrease of the spontaneous magnetization M_s at room temperature. Since there are three non-equivalent Sn sites, 2c (0.33, 0.67,0), 2d (0.33, 0.67,0.5) and 2e (0,0,0.34) in the TbMn₆Sn_6-xGa_x compounds, the ¹¹⁹Sn M?ssbauer spectra of the TbMn₆Sn₆ and TbMn₆Sn_5.4Ga_0.6 compounds can be fitted by three sextets. The hyperfine fields (HFs) decrease in the order of HF(2d)>HF(2e)>HF(2c), which is in agreement with the magnetic structure.     

熔体旋甩法合成n型(Bi_(0.85)Sb_(0.15))_2(Te_(1-x)Se_x)_3化合物的微结构及热电性能

采用熔体旋甩结合放电等离子烧结(MS-SPS)技术制备了单相n型四元(Bi0.85Sb0.15)2(Te1-xSex)3(x=0.15,0.17,0.19,0.21)化合物,并对所得样品的微结构和热电传输性能进行了系统研究.样品自由断裂面的场发射扫描电子显微镜及抛光面的背散射电子成分分析表明:块体材料晶粒细小,晶粒排列紧密,成分分布均匀且相结构单一,样品中存在大量10—100nm的层状结构.随着Se含量x的增加,样品的电导率和热导率逐渐增加,而Seebeck系数逐渐降低.相比商业应用的区熔材料,MS-SPS方法合成的高Se组成的样品均在425K后表现出更高的ZT值,其中(Bi0.85Sb0.15)2(Te0.83Se0.17)3样品具有最高的ZT值,在360K可达到0.96,并在320—500K均保持较高的ZT值,500K时其ZT值相比区熔材料提高了48%.此外,通过调节Se的含量,可以有效地调控材料的ZT峰值出现的温度段,这对多级或梯度热电器件的制备具有重要意义.     

Spin-polarised DFT study of cobalt-doped gallium clusters

The structural, electronic and magnetic properties of small gallium clusters doped with Cobalt have been studied using spin-polarised density functional theory. The binding energy per atom, second-order differences of total energies and fragmentation energies of equilibrium geometries of the host Ga_n+1 and doped Ga_nCo (n = 1–12) clusters are computed. Doped clusters are found to be more stable than pure Ga clusters; Ga₃Co, Ga₅Co and Ga₈Co clusters are exceptionally stable. Doping with Co changes the highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO–LUMO) gap, and also affects the magnetic moments of clusters.     

Magnetic properties and magnetoresistance effect of Y1-xGdxMn6Sn6 (x=0－1) compounds

The magnetic properties and magnetoresistance effect of Y_1-xGd_xMn₆Sn₆ (x=0－1) compounds have been investigated by magnetization and resistivity measurements in the applied field range (0－5 T). Compounds with x=0.4－1 display ferrimagnetic behaviours in the whole magnetic ordering temperature range, while compounds with x=0－0.2 display a field-induced metamagnetic transition, and the threshold fields decrease with increasing Gd content. The compounds with x=0.1－0.2 undergo an antiferromagnetic to ferromagnetic transition with increasing temperature. The cell-parameter a and c and cell-volume V of compounds (x=0－1) increase with increasing Gd content. It was found that the saturation magnetization M_s of the compounds (x=0.4－1) decreases, while the ordering points of the compounds (x=0－1)increase with increasing Gd content. A large MR effect was observed in the compound with x=0.2, and the maximum absolute value of MR at 5 K under 3 T is close to 19.3%.     

Stability and electronic properties of Rh-doped ruthenium clusters and their interaction with NH3 molecule

The stability and electronic properties of the Rh-doped ruthenium clusters and their reactivity towards NH₃ molecule have been studied using DFT calculations with the BLYP-D3/SDD level of theory. The results show that the doping of Ru clusters with Rh atom improves the catalytic performances of pure Ru clusters, and the Ru₅Rh and Ru₇Rh clusters are assumed to be less reactive than their neighbours. The interaction of NH₃ with clusters exhibits that the Ru atoms are preferred adsorption sites for the NH₃ molecule, and the adsorption takes place between the Ru atom of clusters and the N atom of NH₃ molecule. The adsorption energies of NH₃ on Ru_nRh clusters are in the range of ?101.5 to ?218.4?kJ?mol^?1, suggesting a strong adsorption between both species. Upon adsorption process, the electronic properties of the Ru_nRh clusters were substantially changed. The variation of E_g (ΔE_g) for the Ru_nRh (n?≥?7) clusters is very important (ΔE_g?≥?55%), suggesting that these clusters are very sensitive to the NH₃ molecule. Hence, these clusters can be employed as nanosensors for the detection of the NH₃ gas.     

Cu addition and its role in thermoelectric properties and nanostructuring in the series compounds (InSb)nCum

We have performed a comparative investigation of the series compounds (InSb)_nCu_m to assess the roles of Cu addition on the thermoelectric properties and nanostructuring in bulk InSb. Detailed temperature dependent transport properties including electrical conductivity, the Seebeck coefficient, and thermal conductivity are presented. The Seebeck coefficients of In₂₀Sb₂₀Cu (m:n = 1:20) are increased by 13 percent in magnitude if compared to those of InSb, which is responsible for the 22 percent enhancement in the highest ZT value at 687 K. Although the magnitudes of κ_L are larger than those of InSb over the entire temperature range, a remarkable reduction in lattice thermal conductivities (κ_L) was observed with measuring temperature elevation. Such changes are mainly due to the precipitation of a large number of Cu₉In₄ nanoparticles with the size of smaller than 5 nm, dispersed in the matrix observed using high resolution transmission electron microscopy (HRTEM) images.     

(Nd1－xGdx)3Fe27.31Ti1.69化合物的结构和磁性

通过X射线衍射和磁性测量等手段研究了(Nd_1-xGd_x)₃Fe_27.31Ti_1.69(0≤x≤0.6)化合物的结构和磁性.X射线衍射测量结果表明Gd替代后并未改变Nd₃(Fe,Ti)₂₉化合物的晶体结构，但引起了晶胞体积收缩.随着Gd含量的增加，化合物的居里温度T_C和室温磁晶各向异性场B_a单调增加，而自旋重取向 关键词： 1-xGd_x)₃Fe_27.31Ti_1.69化合物')" href="#">(Nd_1-xGd_x)₃Fe_27.31Ti_1.69化合物 磁晶各向异性 自旋重取向 磁相图     

Synthesis,spectroscopic and structural characterisation of two p-nitrobenzamide compounds: experimental and DFT study

The title molecules, N-(1,5-dimethyl-3-oxo-2-phenyl-1H-3-(2H)-pyrazolyl)4-nitrobenzamide (C₁₈H₁₆N₄O₄·H₂O) (I) and 2,2-dimethyl-3-(4-nitrobenzoyl)-5-(phenylamino)-2,3-dihydro-1,3,4-thiyadiazole (C₁₇H₁₆N₄O₃S) (II), were prepared and characterised by ¹H NMR, ¹³C NMR, infrared spectroscopy (IR) and structural X-ray diffraction (XRD) techniques. The molecular geometries, vibrational frequencies of the title compounds in the ground state have been calculated by using the density functional theory (DFT) method with 6-31G(d) basis set, and compared with the experimental data. The calculated results showed that the optimised geometries from the DFT method agree with the X-ray structures well for both compounds. Theoretical calculations of harmonic vibration frequencies are in good agreement with experimental results. To determine conformational flexibility, the molecular energy profiles of the title compounds were obtained. Besides, molecular electrostatic potential (MEP), frontier molecular orbitals (FMO) analysis and thermodynamic properties of the title compounds were investigated by theoretical calculations.     

C72,La2@C72几何结构和电子性质的计算研究

采用密度泛涵理论(density functional theory, DFT)中的广义梯度近似(generally gradient approximation, GGA)对富勒烯C₇₂和内掺金属La富勒烯La₂@C₇₂三种同分异构体的几何结构和电子结构进行研究.发现在C₇₂的三种同分异构体中，满足独立五边形规则(isolated-pentagon-rule，IPR)的C₇₂(D_{6d< 关键词： 72}')" href="#">C₇₂ 2@C₇₂')" href="#">La₂@C₇₂ 密度泛涵理论 几何结构 电子结构     

非化学计量比AgSbTe2+x化合物制备及热电性能

采用高纯元素直接熔融、淬火并结合放电等离子烧结方法制备了非化学计量比AgSbTe_2+x(x=0—0.05)系列样品,研究了不同Te含量在300—600 K范围内对样品热电性能的影响规律.结果表明:随着Te含量的增加,Ag⁺离子空位浓度增加,空穴浓度和电导率大幅度提高,Seebeck系数减小.热导率随Te过量程度的增加略有增加,但所有Te过量样品的晶格热导率均介于0.32—0.49 W/mK之间,低于化学计量比样品的值,接近理论最低晶格热导率.AgS 关键词： 2')" href="#">AgSbTe₂ 非化学计量比 热电性能 热导率     

First-principles study of structural,elastic, electronic and thermodynamic properties of topological insulator Bi2Se3 under pressure

The structural, elastic, electronic and thermodynamic properties of the rhombohedral topological insulator Bi₂Se₃ are investigated by the generalized gradient approximation (GGA) with the Wu–Cohen (WC) exchange-correlation functional. The calculated lattice constants agree well with the available experimental and other theoretical data. Our GGA calculations indicate that Bi₂Se₃ is a 3D topological insulator with a band gap of 0.287 eV, which are well consistent with the experimental value of 0.3 eV. The pressure dependence of the elastic constants C_ij, bulk modulus B, shear modulus G, Young’s modulus E, and Poisson’s ratio σ of Bi₂Se₃ are also obtained successfully. The bulk modulus obtained from elastic constants is 53.5 GPa, which agrees well with the experimental value of 53 GPa. We also investigate the shear sound velocity V_S, longitudinal sound velocity V_L, and Debye temperature Θ_E from our elastic constants, as well as the thermodynamic properties from quasi-harmonic Debye model. We obtain that the heat capacity C_v and the thermal expansion coefficient α at 0 GPa and 300 K are 120.78 J mol^?1 K^?1 and 4.70 × 10^?5 K^?1, respectively.     

Lattice and magnetism in superconducting compounds Ca1-xKxFe2As2

Based on the density functional theory(DFT),using the scheme of the linearized augmented plane wave and the improved local orbital(APW + lo),the structure,the electronic bands and the magnetism of superconducting compounds Ca1-xKxFe2As2(x = 0,0.25,0.5,0.75,1) are optimized and calculated.The calculation results indicate that with K-doping the lengths of the a,b axes can decrease,and the length of the c axis,the volume,the energy of spin-down valence bands,and the DOS at the Fermi level can increase,which leads the magnetic moment of the system to increase.     

First-principles studies of the electronic structure and optical properties of AgBO<Subscript>3</Subscript> (B=Nb,Ta) in the paraelectric phase

The electronic energy-band structure, density of states (DOS), and optical properties of AgBO₃ in the paraelectric cubic phase have been studied by using density functional theory within the local density approximation for exchange-correlation for the first time. The band structure shows a band gap of 1.533 eV (AgNbO₃)and 1.537 eV (AgTaO₃)at (M-⌈)point in the Brillouin zone. The optical spectra of AgBO₃ in the photon energy range up to 30 eV are investigated under the scissor approximation. The real and imaginary parts of the dielectric function and — thus the optical constants such as reflectivity, absorption coefficient, electron energy-loss function, refractive index, and extinction coefficient — are calculated. We have also made some comparisons with related experimental and theoretical data that is available.      

DFT study on electronic structures and optical absorption properties of C, S cation- doped SrTiO3

The effects of C cation and S cation doping on the electronic structures and optical properties of SrTiO₃ are investigated by density function theory (DFT) calculations. The calculated results reveal that the top of the valence band is predominately made up of the O 2p states for the pure SrTiO₃. When SrTiO₃ was doped with C cation and S cation, the top of the valence bands consists mainly of O 2p+C 2s hybrid orbitals and O 2p+S 3s hybrid orbitals, respectively. The band gap of SrTiO₃ is narrowed by the doping with C cation and S cation, especially for the C and S-codoped SrTiO₃. Moreover, the red shifts of the absorption edge are found by the calculated optical properties, which is consistent with reported experiment results. It is the explanation for their visible light respondency by the presence of C 2s and S 3s states on the upper edge of the valence band. All of these results can explain the good photocatalytic properties of C, S cation-codoped SrTiO₃ under visible light irradiation.      

First-principle study on the structural and electronic properties of H2S and SO2 adsorption on Pd-doped MoS2 monolayer

The partial discharge in SF₆-insulated equipment produces characteristic decomposition products: SO₂ and H₂S. The characteristic decomposition products vastly speed up the process of discharge faults. Based on density functional theory (DFT) calculation, single layer Pd-doped MoS₂ (Pd-MoS₂) is adopted as the adsorbent to adsorb SO₂ and H₂S to ensure the operational stability of SF₆-insulated equipment. The adsorption energy, charge transfer and structure parameters of SF₆, H₂S, and SO₂ adsorption on the Pd-MoS₂ monolayer are analysed to find the most stable adsorption structure. The molecular orbital theory, total density of states and partial density of states are studied to analyse the adsorption mechanism. The results show that Pd-MoS₂ adsorbent possesses high catalytic activity and excellent adsorption performance to H₂S and SO₂ by strong chemical adsorption. This study is of great significance to ensure the operational stability of SF6-insulated equipment by removing these characteristic decomposition products.     

Synthesis and thermoelectric properties of Mn-doped AgSbTe2 compounds

Polycrystalline p-type Ag 0.9 Sb 1.1 x Mn x Te 2.05（x = 0.05,0.10,and 0.20） compounds have been prepared by a combined process of melt-quenching and spark plasma sintering.The sample composition of Ag 0.9 Sb 1.1 x Mn x Te 2.05 has been specially designed in order to achieve the doping effect by replacing part of Sb with Mn and to present the uniformly dispersed Ag 2 Te phase in the matrix by adding insufficient Te,which is beneficial for optimizing the electrical transport properties and enhancing the phonon scattering effect.All the samples have the NaCl-type structure according to our X-ray powder diffraction analysis.After the treatment of spark plasma sintering,only the sample with x = 0.20 has a small amount of MnTe 2 impurities.The thermal analysis indicates that a tiny amount of Ag 2 Te phase exists in all these samples.The presence of the MnTe 2 impurity with high resistance and high thermal conductivity leads to the deteriorative thermoelectric performance of the sample with x = 0.20 due to the decreased electrical transport properties and the increased thermal conductivity.In contrast,the sample with x = 0.10 exhibits enhanced thermoeletric properties due to the Mn-doping effect.A dimensionless thermoelectric figure of merit of 1.2 is attained for the sample with x = 0.10 at 573 K,showing promising thermoelectric properties in the medium temperature range.     

Fundamental and transport properties of ZnX,CdX and HgX (X = S,Se, Te) compounds

We have performed ab initio self-consistent calculations based on full potential linear augmented plane-wave method (FP-LAPW) with the local density approximation (LDA) and generalised gradient approximation (GGA) to investigate the relativistic effects on the structural, electronic, transport and optical properties of II–VI compounds. We mainly show that the stabilisation (destabilisation) of s, p*(p) orbital energies reduces the lattice parameters of II–VI compounds, the band gaps and the effective masses. This, however, induces strong spin–orbit splitting of heavier II–VI compounds.