Strain-Induced Ring Expansion Reactions of Calix[3]pyrrole-Related Macrocycles

The recent discovery of calix[3]pyrrole, a porphyrinogen-like tripyrrolic macrocycle, has provided an unprecedented strain-induced ring expansion reaction into calix[6]pyrrole. Here, we synthesized calix[n]furan[3-n]pyrrole (n=1∼3) macrocycles to investigate the reaction scope and mechanism of the ring expansion. Single crystal X-ray analysis and theoretical calculations revealed that macrocyclic ring strain increases as the number of inner NH sites increases. While calix[1]furan[2]pyrrole exhibited almost quantitative conversion into calix[2]furan[4]pyrrole within 5 minutes, less-strained calix[2]furan[1]pyrrole and calix[3]furan were inert. However, N-methylation of calix[2]furan[1]pyrrole induced a ring-expansion reaction that enabled the isolation of a linear reaction intermediate. The mechanism analysis revealed that the ring expansion consists of regioselective ring cleavage and subsequent cyclodimerization. This reaction was further utilized for synthesis of calix[6]-type macrocycles.     

Anion Complexation by Meso-Octamethylcalix[4]pyrrole in Aqueous Solution

The ligand calix[4]pyrrole is quite insoluble in aqueous solution. In the presence of NaCl, KCl, CsCl, NH₄Cl, CaCl₂, and CdCl₂, the solubility of calix[4]pyrrole linearly increases with the salt concentration. The ligand calix[4]pyrrole forms stable complexes with the chloride anion. All other halogen anions do not form complexes. The measurement of the amount of dissolved ligand allows the determination of the complex stabilities in aqueous solution. This experimental method is discussed in detail due to its general suitability to study the complexation reactions with nearly insoluble ligands.     

Calix[4]arene‐based Bis‐phosphonites,Bis‐phosphites,and Bis‐O‐acyl‐phosphites as Ligands in the Rhodium(I)‐catalyzed Hydroformylation of 1‐Octene

New calix[4]arene‐based bis‐phosphonites, bis‐phosphites and bis‐O‐acylphosphites were synthesized and characterized. Treatment of these P‐ligands with selected rhodium and platinum precursors led to mononuclear complexes that were satisfactorily characterized. The solid state structure of the dirhodium(I) complex 14 has been determined by X‐ray diffraction. The two rhodium centres are bridged by two chloro ligands; one rhodium atom is further coordinated by calix[4]arene phosphorus atoms and the other by cyclooctadiene. The new calix[4]arene P‐ligands were tested in the Rh(I) catalyzed hydroformylation of 1‐octene. All Rh(I) complexes catalyzed the reaction leading to high chemoselectivity with regard to the formation of aldehydes. Yields and n/iso‐selectivities depended on the reaction conditions. Average yields of 80 % and n/iso‐ratios of about 1.3 to 1.5 were observed. High yields of aldehydes can be achieved using the methoxy substituted P‐ligands at low Rh:ligand ratios.     

Electrochemically triggered open and closed Pacman bis-metalloporphyrins

A new type of very compact Pacman bis-porphyrin scaffold has been obtained in which a calix[4]arene spacer provides both cofacial preorganization and flexibility. Changes in the distance between the two tetrapyrrolic macrocycles can be triggered by electrochemistry, where closed and open conformers can be interconverted in a handclapping motion.     

A Schiff basep-tent-butylcalix[4]arene. Synthesis and metal ion complexation

This communication describes the synthesis of Schiff base calix[4]arene (1) in which the Schiff base unit bridges two opposite hydroxy groups ofp-tert-butylcalix[4]arene. The synthesis of (1) has been achieved by refluxing in acetonitrile-methanol the appropriate 1,3-dicarbaldehyde-p-tert-butyl-calix[4]arene (4) with 1,3-diaminopropane. The yield of the reaction is 19%. Ligand (1) possesses a compartment containing two nitrogen atoms, four ether-type oxygen atoms, and two ionizable hydroxy groups likely to complex metal cations.     

Unsymmetrical calix[4]arene bisporphyrin Pacman

[structure: see text] The synthesis of a Pacman heterobisporphyrin associating an octaethyl porphyrinatozinc (ZnOEP) energy donor and a triaryl porphyrinatozinc (ZntPP) energy acceptor around a calix[4]arene spacer is described. Contrary to previous symmetrical architectures, correlations between the chromophores in the unsymmetrical calixarene bisporphyrin Pacman scaffold can now be observed in ROESY experiments. Independent of the excitation wavelength, only the luminescence of the ZntPP moiety was observed corresponding to quenching of the OEP moiety's emission.     

Synthesis and crystal structure of Ni,Cu complexes of 5-methyl-10,10,15,15,20,20-hexaethylcalix[4]pyrrole mono-Schiff bases

The functionalized calix[4]pyrrole meso-substituted Schiff bases were conveniently prepared by fourstep synthetic route. Furthermore, the nickel and copper complexes of calix[4]pyrrolemeso-substituted Schiff base with 1:2 stoichiometry were obtained. The crystal structures of the calix[4]pyrroles and their metal complexes were determined by X-ray diffraction.     

Synthesis and Properties of Functionalized Schiff Bases of 5α,10α-Di（4-hydroxylphenyl）calix[4]pyrrole and 5α,15β-Di（4-hydroxylphenyl）calix｜4] pyrrole

A series of calix[4]pyrrole meso-substituted Schiff bases was synthesized with 5α,10α-di（4- hydroxylphenyl）calix[4]pyrrole or 5α,15β-di（4-hydroxylphenyl）calix[4]pyrrole as starting materials. The synthetic routes included alkylation with methyl a-chlroroaceate, ammonolysis with alkylene diamine, and condensation with salieylladehyde or 2-hydroxynaphthaldehyde. The crystal structures of the new calix[4]pyrroles and their Schiff bases were determined by X-ray diffraction. The coordination properties of the representative ealix[4]pyrrole Sehiff bases to transition metal ions were also investigated by UV-Vis spectra.     

C-amidoalkylation of pyrroles with <Emphasis Type="Italic">N</Emphasis>-trifluoromethylsulfonyl and <Emphasis Type="Italic">N</Emphasis>-arylsulfonyl polychloroaldehyde imines

N-(Trifluoromethylsulfonyl) and N-arylsulfonyl polychloroacetaldehyde imines reacted with pyrrole, 1-alkyl-, 1-benzyl-, and 1-(4-nitrophenyl)-substituted pyrroles, and bis-pyrroles to give the corresponding 2-[1-(sulfonylamino)polychloroethyl]-1H-pyrroles or mixtures of 2- and 3-[1-(sulfonylamino)polychloroethyl]-1H-pyrroles, depending on the nature of the Schiff base and substituent on the pyrrole nitrogen atom and reaction conditions. The first synthesis of 2,5-disubstituted NH-pyrrole by reaction of pyrrole with Schiff bases was described.     

新型Schiff碱单核配合物的合成及光谱特征

首次报道了新型Schiff碱配合物-双[N,N’-亚乙基-2,2’-(苯亚甲基)二(3,4-二甲基吡咯-5-醛缩亚胺)]合单金属配合物MH_2L[M=Mn(Ⅱ)、Fe(Ⅲ)Cl、Cr(Ⅲ)Cl、Cu(Ⅱ)、Co(Ⅱ)、Ni(Ⅱ)、Zn(Ⅱ)]的合成方法及光谱特征。     

Synthesis,Characterization, and Crystal Structure of Mononuclear and Dinuclear Dioxomolybdenum(VI) Complexes with Tridentate Schiff‐base Ligands. Part 2

Mononuclear [MoO₂LD], and dinuclear [MoO₂L]₂ or [MoO₂L]₂ · D dixomolybdenum(VI) complexes have been prepared by the reaction of tridentate Schiff‐base ligands L with [MoO₂(acac)₂]. The Schiff‐base ligands have been synthesized from salicylaldehyde ( 1 , 1a , 1c , 1d ), 2‐hydroxy‐1‐naphthaldehyde ( 2 , 2c ) and 2‐hydroxy‐3‐methoxybenzaldehyde ( 3a , 3b , 3c , 3d , 3e ) with 2‐amino‐p‐cresol. All prepared complexes consist of cis‐MoO₂²⁺core coordinated by Schiff‐base ligand through two deprotonated hydroxyl groups and one imino nitrogen atom. The usual octahedral coordination around the molybdenum atoms is completed by the neutral ligand D (methanol, ethanol, dimethyl sulfoxide, imidazole or 4, 4′‐bipyridine). All compounds were characterized by elemental analyses, IR spectroscopy and some of them by X‐ray crystallography ( 1a , 2c , 3a , 3b , 3c and 3e ).     

Calix[4]pyrrole Schiff base macrocycles. Novel binucleating ligands for mu-oxo iron complexes

New bimetallic mu-oxo diferric complexes of several previously reported calix[4]pyrrole Schiff base macrocycles are described. The synthesis of a new member of this class of macrocycles is also reported; it was prepared via an acid-catalyzed condensation between 1,9-bisformyl-5,5-dipropyldipyrromethane and o-phenylenediamine. Reactions of the free base macrocycles or their bis-HCl salts with Fe(II) mesitylene, followed by air oxidation, gave the binuclear mu-oxo bis-Fe(III) compounds 6-10 in moderate yield. X-ray crystallography data reveal two different coordination environments for the Fe-O-Fe subunit in 6-10 that it is suggested can be controlled by altering the reaction conditions. Structural properties of these metalated pyrrolic macrocycles are also compared to those of mu-oxo diferric porphyrins and mu-oxo diferric texaphyrin. Complexes 6-10 exhibit two distinct types of M-N bonds that are similar in length to the bonds observed in metallotexaphyrin complexes. However, the electronics of the present systems are very different from those of texaphyrins and porphyrins in that no delocalized bonding patterns are observed within the ligands as a whole.     

Synthesis of new calix[4]arene‐based phosphorus ligands and their application in the Rh(I) catalyzed hydroformylation of 1‐octene

The synthesis of calix[4]arene‐based phosphorus diamides and phosphites is described. These oligocyclic ligands have been tested in the Rh(I)‐ catalyzed hydroformylation of 1‐octene. Depending on the reaction conditions, yields up to 99% and n/iso‐selectivities between 0.7 and 2.6 have been observed. tert‐Butyl groups on the upper rim of the calix[4]arene template had a beneficial effect on the catalytic reaction. In general biuret‐derived P‐ligands were superior. For comparison, the corresponding “monomeric” ligands have also been synthesized and were employed in the catalytic reaction. © 2001 John Wiley & Sons, Inc. Heteroatom Chem 12:577–585, 2001     

Synthesis of novel chiral Schiff base and amino alcohol derivatives of calix[4]arene and chiral recognition properties

In the present study, the synthesis and liquid phase extraction properties towards some amino acid methylesters and amino alcohols of Schiff base and amino alcohol substituted calix[4]arene are reported. The Schiff base substituted calix[4]arene 5 has been synthesized via condensation reaction involving 5,17-diformyl-11,23-di-tert-butyl-25,27-di[3-(4-formylphenoxy)propoxy]-26,28 dihydroxycalix[4]arene 4 and (R)-(?)-2-phenylglycine methyl ester in CHCl₃:MeOH. To give the amino alcohol substituted calix[4]arene 6, the synthesized chiral compound 5 was reduced by LiAlH₄. The new chiral Schiff base and amino alcohol derivatives of calix[4]arene have been characterized by a combination of FT-IR, ¹H NMR, ¹³C NMR, FAB-MS and elemental analysis. Also, the extraction behaviors of 5 and 6 towards some selected amino acid methylesters and amino alcohols have been studied by liquid–liquid extraction.     

Synthesis of Chiral Calix[4]arene Derivative and Evaluation of its Recognition Properties

The article describes the synthesis and extraction properties of a new chiral calix[4]arene Schiff base ligand 5, which has been synthesized from 5,17-diformyl-25,27-bis-(4-nitrobenzyloxy)-26,28-dihidroxycalix[4]arene (4) by treatment with (S)-(-)-1-phenylethylamine. In this synthesis, it was thought to explore the role of chiral, as well as Schiff base sites in the recognition of targeted species ions (such as dichromate anions) as well as neutral/chiral molecules. At low pH, the ligand 5 is more effective for transferring the dichromate anions from an aqueous into a dichloromethane layer; may be due to the protonation of nitrogen atoms.

The extraction properties of ligand 5 towards the some selected α -amino acid methylesters are also reported. However, the ligand 5 did not display any selectivity towards the selected α-amino acid methylesters.     

Spectroscopic and spectrometric studies of anion recognition with calix[4]pyrroles in different reaction conditions

The binding studies of calix[4]pyrroles (1–6) with fluoro, chloro, bromo, iodo and sulphato anions generated from normal-tetrabutylammoniumfluoride, normal-tetrabutylammoniumchloride, normal-tetrabutylammoniumbromide, normal-tetrabutylammoniumiodide, and normal-tetrabutylammoniumsulphate respectively were investigated by electrospray ionization mass spectrometry (ESI-MS) in dichloromethane–acetonitrile in negative ion mode. The efficacy of a particular calix[4]pyrrole to bind with anions was found maximum at low cone voltage of the instrument, at high cone voltage the binding was suppressed due to removal of anion from the cavity of the macrocycles. The binding strength was found inversely proportional to the size of anion for a particular calix[4]pyrrole. The fragmentation pattern of calix[4]pyrrole was observed at higher cone voltage of ESI-MS and was interpreted. The association constants of calix[4]pyrroles and anions obtained from electronic transition studies were in good agreement with that observed from ¹H NMR titration studies.     

Synthesis and Extractive Properties of Hexaphosphorylated Calix[6]arenes

A series of calix[6]arenes substituted with phosphoryl functional groups were prepared by the Arbuzov reaction of hexakis(chloromethyl)calix[6]arene hexamethyl ether with isopropyl esters of trivalent phosphorus acids, followed by appropriate chemical transformations. Molecular modeling and NMR data show that phosphorylated calix[6]arenes exist in the stereochemically labile 1,2-alternate conformation. The extractive power of these compounds with respect to americium and europium was studied. Due to the cooperative binding of the metal cation with phosphoryl groups, the phosphorylated calixarenes are more effective extractants than their acylcic analogs and commercial organophosphorus extractants.     

Chiral Calix[3]pyrrole Derivatives: Synthesis,Racemization Kinetics,and Ring Expansion to Calix[9]- and Calix[12]pyrrole Analogues

Chiral pyrrolic macrocycles continue to attract interest. However, their molecular design remains challenging. Here, we report a calixpyrrole-based chiral macrocyclic system, calix[1]furan[1]pyrrole[1]thiophene ( 1 ), synthesized from an oligoketone. Macrocycle 1 adopts a partial cone conformation in the solid state, and undergoes racemization via ring inversion. Molecular dynamics simulations revealed that inversion of the thiophene is the rate determining step. Pyrrole N-methylation suppressed racemization and permitted chiral resolution. Enantioselective N-methylation also occurred in the presence of a chiral ammonium salt, although the stereoselectivity is modest. A unique feature of 1 is that it acts as a useful synthetic precursor to yield several calix[n]furan[n]pyrrole[n]thiophene products (n=2–4), including a calix[12]pyrrole analogue that to our knowledge constitutes the largest calix[n]pyrrole-like species to be structurally characterized.     

Synthesis and characterisation of a calix[4]pyrrole functional polystyrene via ‘click chemistry’ and its use in the extraction of halide anion salts

A polystyrene with pendant calix[4]pyrroles was prepared via ‘click reaction’ strategy. First, a poly(styrene-co-chloromethylstyrene) with approximately 12% of chloro groups was prepared by conventional free radical polymerisation. The chloro groups were then converted to azido groups using NaN₃ in N,N-dimethylformamide. An alkyne-functionalised calix[4]pyrrole was then coupled to the azido-functionalised polystyrene by click chemistry with high efficiency. The resulting polystyrene with pendant calix[4]pyrroles was used to extract fluoride and chloride anions (as their tetrabutylammonium salts) from their aqueous solutions to organic media.     

Influence of the Attachment of a Gold(I) Phosphine Moiety at the Upper Rim of a Calix[4]pyrrole on the Binding of Tetraalkylammonium Chloride Salts

We report the synthesis of an unprecedented mono-gold(I) phosphine complex based on a “two-wall” aryl-ethynyl extended calix[4]pyrrole. We describe and compare the binding properties of the parent 10α,20α-bis-aryl-ethynyl calix[4]pyrrole ligand and the prepared organometallic compound as receptors for tetraalkylammonium chloride salts in dichloromethane and acetone. We describe the results of ¹H NMR, UV–Vis titrations and isothermal titration calorimetry (ITC) experiments in dichloromethane and acetone, aiming to thermodynamically characterize the formed complexes. The obtained results indicate a noticeable decrease in the binding affinity of the chloride for the mono-gold(I) receptor 1 compared to the parent ligand 2 . The increase in the negative value of the electrostatic surface potential at the center of the aromatic ring of the gold(I) meso-aryl-ethynyl substituent serves to explain the observed results and the presence in solution of the chloride complex of 1 as a mixture of two conformers.