Fulvene Synthesis by Rhodium(I)‐Catalyzed [2+2+1] Cycloaddition: Synthesis and Catalytic Activity of Tunable Cyclopentadienyl Rhodium(III) Complexes with Pendant Amides

It has been established that a Rh^I+/segphos complex catalyzes the [2+2+1] cycloaddition of 1,6‐diynes with cyclopropylideneacetamides to give substituted fulvenes in good yields. The reductive complexation of the product fulvenes with RhCl₃ in EtOH furnished the corresponding dinuclear cyclopentadienyl Rh^III complexes bearing a pendant amide moiety. These Rh^III complexes were highly active catalysts for oxidative annulation and cyclization through C(sp²)−H and C(sp³)−H functionalization.     

Kinetics and mechanism of rhodium(III)-catalysed oxidation of 1,2-glycols by acid bromate

Summary Rh^III-catalysed oxidation of 1,2-glycols by acid bromate was studied in the presence of Hg(OAc)₂ at 40°C. The order is zero with respect to [BrO ₃ ^– ] and unity in [Rh^III] and in [glycol]. The oxidation rate is unaffected by variation in [H⁺] and added salts. Stoichiometric studies indicate that one mole of bromate consumes three moles of glycol giving the corresponding carbonyl compounds. A suitable mechanism involving direct reaction between Rh^III and glycol to give product,via hydride ion abstraction by Rh^III, is proposed.     

Oxidatively Induced Selective Carbon-Carbon Bond Formation From Isolated Rhodium(III) Complexes

This work focuses on oxidatively induced regioselective intramolecular C−C bond formations based on the Rh^III complexes synthesized from dirhodium(II) trifluoroacetate with 2-arylpyridines. With the selection of electron-donating groups on the arene rings of 2-arylpyridines, the unusual meta-ortho C−C bond-forming was favored, which led to the formation of meta-substituted 2-arylpyridine homocoupling dimers. On the contrary, the electron-withdrawing groups have tendency to occur conventional ortho-ortho bond-forming, resulting in the formation of new Rh^III complexes possessing the intriguing Rh^III(TFA)₃ fragment. Preliminary mechanistic experiments suggest that the sequential oxidation of Rh^III occurred in the reaction.     

Structurally Precise Silver Sulfide Nanoclusters Protected by Rhodium(III) Octahedra with Aminothiolates

A 60‐nuclear silver sulfide nanocluster with a highly positive charge ( 1 ) has been synthesized by mixing an octahedral Rh^III complex with 2‐aminoethanethiolate ligands, silver(I) nitrate, and d ‐penicillamine in water under mild conditions. The spherical surface of 1 is protected by the chiral octahedral Rh^III complex, with cleavage of the C?S bond of the d ‐penicillamine supplying the sulfide ions. Although 1 does not contain d ‐penicillamine, it is optically active because of the enantiomeric excess of the Rh^III molecules induced by chiral transfer from d ‐penicillamine. 1 can accommodate/release external Ag⁺ ions and replace inner Ag⁺ ions by Cu⁺ ions. The study demonstrates that a thiolato metal complex and sulfur‐containing amino acid can be used as cluster‐surface‐protecting and sulfide‐supplying regents, respectively, for creating chiral, water‐soluble, structurally precise silver sulfide nanoclusters, the properties of which are tunable through the addition/removal/exchange of Ag⁺ ions.     

Cp*RhIII‐Catalyzed Arylation of C(sp3)H Bonds

The first Cp*Rh^III‐catalyzed arylation of unactivated C(sp³)? H bonds is presented. The unactivated primary C(sp³)? H bond of 2‐alkylpyridines can be activated by Rh^III and further reacts with triarylboroxines to efficiently build new C(sp³)? aryl bonds. The methodology also provides a facile and efficient synthesis of unsymmetrical triarylmethanes by Rh^III‐catalyzed C(sp³)? H arylation of diarylmethanes.     

Rhodium(III)-Catalyzed Asymmetric [4+1] and [5+1] Annulation of Arenes and 1,3-Enynes: A Distinct Mechanism of Allyl Formation and Allyl Functionalization

We report chiral Rh^III cyclopentadienyl-catalyzed enantioselective synthesis of lactams and isochromenes through oxidative [4+1] and [5+1] annulation, respectively, between arenes and 1,3-enynes. The reaction proceeds through a C−H activation, alkenyl-to-allyl rearrangement, and a nucleophilic cyclization cascade. The mechanisms of the [4+1] annulations were elucidated by a combination of experimental and computational methods. DFT studies indicated that, following the C−H activation and alkyne insertion, a Rh^III alkenyl intermediate undergoes δ-hydrogen elimination of the allylic C−H via a six-membered ring transition state to produce a Rh^III enallene hydride intermediate. Subsequent hydride insertion and allyl rearrangement affords several rhodium(III) allyl intermediates, and a rare Rh^III η⁴ ene-allyl species with π-agostic interaction undergoes SN₂′-type external attack by the nitrogen nucleophile, instead of C−N reductive elimination, as the stereodetermining step.     

Active states of rhodium in zeolite catalysts after rhodium(III)-exchange

Zeolite-X exchanged with Rh^III compounds and activated at 450 °C in O₂ contains two paramagnetic species involving rhodium: these, detected by e.s.r, are Rh^II and superoxides of Rh^III. Superoxo-rhodium(III) is formed by the oxidation with O₂ of Rh^II generated in the heat treatment.     

2‐(2′‐Pyridyl)‐4,6‐diphenylphosphinine versus 2‐(2′‐Pyridyl)‐4,6‐diphenylpyridine: Synthesis,Characterization, and Reactivity of Cationic RhIII and IrIII Complexes Based on Aromatic Phosphorus Heterocycles

The bidentate P,N hybrid ligand 1 allows access for the first time to novel cationic phosphinine‐based Rh^III and Ir^III complexes, broadening significantly the scope of low‐coordinate aromatic phosphorus heterocycles for potential applications. The coordination chemistry of 1 towards Rh^III and Ir^III was investigated and compared with the analogous 2,2′‐bipyridine derivative, 2‐(2′‐pyridyl)‐4,6‐diphenylpyridine ( 2 ), which showed significant differences. The molecular structures of [RhCl(Cp*)( 1 )]Cl and [IrCl(Cp*)( 1 )]Cl (Cp*=pentamethylcyclopentadienyl) were determined by means of X‐ray diffraction and confirm the mononuclear nature of the λ³‐phosphinine–Rh^III and Ir^III complexes. In contrast, a different reactivity and coordination behavior was found for the nitrogen analogue 2 , especially towards Rh^III as a bimetallic ion pair [RhCl(Cp*)( 2 )]⁺[RhCl₃(Cp*)]^? is formed rather than a mononuclear coordination compound. [RhCl(Cp*)( 1 )]Cl and [IrCl(Cp*)( 1 )]Cl react with water regio‐ and diastereoselectively at the external P?C double bond, leading exclusively to the anti‐addition products [MCl(Cp*)( 1 H ? OH)]Cl as confirmed by X‐ray crystal‐structure determination.     

Ligational behaviour of two biologically active N−S donors towards cobalt(III), iron(III), iron(II) and rhodium(III)

Summary The chelating behaviour of two biologically active ligands, pyridine-2-carboxaldehyde(4-phenyl) thiosemicarbazone(L₁H) and pyridine-2-carboxaldehyde thiosemicarbazone(LH), towards Fe^III, Co^III, Fe^II and Rh^III has been investigated. The ligands act as tridentate N–N–S donors, resulting in the formation of bis-chelate complexes of the type M^III(A)₂X·nH₂O (A=L₁ or L; X=Cl, ClO₄; M=Co^III, Rh^III, Fe^III), Fe^II(L₁H)₂SO₄·2H₂O and Fe^II(L₁)₂·H₂O. Biological activity of the ligands and the metal complexes in the form ofin vitro antibacterial activities towardsE. coli has been evaluated and the possible reasons for enhancement of the activity of ligands on coordination to metal ion is discussed.     

Direct Regio‐ and Diastereoselective Synthesis of δ‐Lactams from Acrylamides and Unactivated Alkenes Initiated by RhIII‐Catalyzed C−H Activation

We report a Rh^III‐catalyzed regio‐ and diastereoselective synthesis of δ‐lactams from readily available acrylamide derivatives and unactivated alkenes. The reaction provides a rapid route to a diverse set of δ‐lactams in good yield and stereoselectivity, which serve as useful building blocks for substituted piperidines. The regioselectivity of the reaction with unactivated terminal alkene is significantly improved by using Cp^t ligand on the Rh^III catalyst. The synthetic utility of the reaction is demonstrated by the preparation of a potential drug candidate containing a trisubstituted piperidine moiety. Mechanistic studies show that the reversibility of the C?H activation depends on the choice of Cp ligand on the Rh^III catalyst. The irreversible C?H activation is observed and becomes turnover‐limiting with [Cp^tRhCl₂]₂ as catalyst.     

[RhIII(dmbpy)2Cl2]+ as a Highly Efficient Catalyst for Visible‐Light‐Driven Hydrogen Production in Pure Water: Comparison with Other Rhodium Catalysts

We report a very efficient homogeneous system for the visible‐light‐driven hydrogen production in pure aqueous solution at room temperature. This comprises [Rh^III(dmbpy)₂Cl₂]Cl ( 1 ) as catalyst, [Ru(bpy)₃]Cl₂ ( PS1 ) as photosensitizer, and ascorbate as sacrificial electron donor. Comparative studies in aqueous solutions also performed with other known rhodium catalysts, or with an iridium photosensitizer, show that 1) the PS1 / 1 /ascorbate/ascorbic acid system is by far the most active rhodium‐based homogeneous photocatalytic system for hydrogen production in a purely aqueous medium when compared to the previously reported rhodium catalysts, Na₃[Rh^I(dpm)₃Cl] and [Rh^III(bpy)Cp*(H₂O)]SO₄ and 2) the system is less efficient when [Ir^III(ppy)₂(bpy)]Cl ( PS2 ) is used as photosensitizer. Because catalyst 1 is the most efficient rhodium‐based H₂‐evolving catalyst in water, the performance limits of this complex were further investigated by varying the PS1 / 1 ratio at pH 4.0. Under optimal conditions, the system gives up to 1010 turnovers versus the catalyst with an initial turnover frequency as high as 857 TON h^?1. Nanosecond transient absorption spectroscopy measurements show that the initial step of the photocatalytic H₂‐evolution mechanism is a reductive quenching of the PS1 excited state by ascorbate, leading to the reduced form of PS1 , which is then able to reduce [Rh^III(dmbpy)₂Cl₂]⁺ to [Rh^I(dmbpy)₂]⁺. This reduced species can react with protons to yield the hydride [Rh^III(H)(dmbpy)₂(H₂O)]²⁺, which is the key intermediate for the H₂ production.     

Electrochemical activity of rhodium complexes supported on fibrous-carbon material

The redox properties of heterogenized Rh^I, Rh^II, and Rh^III complexes with different, particularly organophosphorus, ligands were studied by cyclic voltammetry (CVA). The support is a carbon-paste electrode based on a fibrous-carbon material and activated carbon. The electrochemical reduction of Rh^III produces Rh metal, which further catalyzes hydrogen evolution. After the reduction of water-soluble binuclear Rh^II complexes, the CVA curves exhibit peaks of electrocatalytic hydrogen evolution and irreversible Rh^I→Rh^II oxidation. The Rh^II complexes with organophosphorus ligands are characterized only by the peak of Rh^I→Rh^II oxidation. After reduction, the Rh^I complexes behave as a pseudo-reverse Rh⁰/Rh^I pair. The electron-donating properties of the ligand determine the reversibility of the system. The degree of structurization of the carbon matrix and the presence of phosphorus(v) atoms in it affect the electrochemical activity of the Rh^II and Rh^I complexes. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 908–914, May, 1999.     

Direct Regio- and Diastereoselective Synthesis of δ-Lactams from Acrylamides and Unactivated Alkenes Initiated by RhIII-Catalyzed C−H Activation

We report a Rh^III-catalyzed regio- and diastereoselective synthesis of δ-lactams from readily available acrylamide derivatives and unactivated alkenes. The reaction provides a rapid route to a diverse set of δ-lactams in good yield and stereoselectivity, which serve as useful building blocks for substituted piperidines. The regioselectivity of the reaction with unactivated terminal alkene is significantly improved by using Cp^t ligand on the Rh^III catalyst. The synthetic utility of the reaction is demonstrated by the preparation of a potential drug candidate containing a trisubstituted piperidine moiety. Mechanistic studies show that the reversibility of the C−H activation depends on the choice of Cp ligand on the Rh^III catalyst. The irreversible C−H activation is observed and becomes turnover-limiting with [Cp^tRhCl₂]₂ as catalyst.     

Rhodium‐Catalyzed Stereoselective Amination of Thioethers with N‐Mesyloxycarbamates: DMAP and Bis(DMAP)CH2Cl2 as Key Additives

A stereoselective Rh‐catalyzed intermolecular amination of thioethers using a readily available chiral N‐mesyloxycarbamate to produce sulfilimines in excellent yields and diastereomeric ratio is described. A catalytic mixture of 4‐dimethylaminopyridine (DMAP) and bis(DMAP)CH₂Cl₂ proved pivotal in achieving high selectivity. The X‐ray crystal structure of the (DMAP)₂?[Rh₂{(S)‐nttl}₄] complex was obtained and mechanistic studies suggested a Rh^II‐Rh^III complex as the catalytically active species.     

Kinetics and mechanism of rhodium(III) catalysed oxidation of polyhydric alcohols by acidified potassium bromate

The kinetics of the Rh^III catalysed oxidation of ethylene glycol and glycerol by an acidified solution of KBrO₃ in the presence of Hg(OAc)₂ as a scavenger, have been studied in the 30–45 °C range. The rate is first order in bromate and in Rh^III but zero order with respect to the substrate and to HClO₄. The influence of Hg(OAc)₂, ionic strength and Cl^– on the rate was found to be insignificant. A transient complex, formed between Rh^III and bromate ion in a slow and rate determining step, reacts with the polyhydric alcohol to give the product in a series of fast steps, which lead to regeneration of the catalyst. Activation parameters have been calculated and a suitable mechanism is proposed.     

Ligand‐Promoted RhIII‐Catalyzed Thiolation of Benzamides with a Broad Disulfide Scope

A ligand‐promoted Rh^III‐catalyzed C(sp²)?H activation/thiolation of benzamides has been developed. Using bidentate mono‐N‐protected amino acid ligands led to the first example of Rh^III‐catalyzed aryl thiolation reactions directed by weakly coordinating directing amide groups. The reaction tolerates a broad range of amides and disulfide reagents.     

Rhodium-catalysed tetradehydro-Diels–Alder reactions of enediynes via a rhodium-stabilized cyclic allene

Efficient methods for the synthesis of fused-aromatic rings is a critical endeavour in the creation of new pharmaceuticals and materials. A direct method for preparing these systems is the tetradehydro-Diels–Alder reaction, however this is limited by the need for harsh reaction conditions. A potential, but underdeveloped, route to these systems is via transition metal-catalysed cycloaromatisation of ene-diynes. Herein, tethered unconjugated enediynes have been shown to undergo a facile room-temperature Rh^I-catalysed intramolecular tetradehydro-Diels–Alder reaction to produce highly substituted isobenzofurans, isoindolines and an indane. Furthermore, experimental and computational studies suggest a novel mechanism involving an unprecedented and complex Rh^I/Rh^III/Rh^I/Rh^III redox cycle involving the formation of an unusual strained 7-membered rhodacyclic allene intermediate and a Rh^III-stabilized 6-membered ring allene complex.

Room temperature Rh-catalysed tetradehydro-Diels–Alder reaction via an unusual Rh-stabilised allene.     

Rhodium‐Catalyzed Cyclization of O,ω‐Unsaturated Alkoxyamines: Formation of Oxygen‐Containing Heterocycles

O,ω‐Unsaturated N‐tosyl alkoxyamines undergo unexpected Rh^III‐catalyzed intramolecular cyclization by oxyamination to produce oxygen‐containing heterocycles. Mechanistic studies show that an aziridine intermediate seems to be responsible for the formation of the heterocycles, possibly via a Rh^V species.     

Investigation and Comparison of the Mechanistic Steps in the [(Cp*MCl2)2] (Cp*=C5Me5; M=Rh,Ir)‐Catalyzed Oxidative Annulation of Isoquinolones with Alkynes

The mechanism of the [(Cp*MCl₂)₂] (M=Rh, Ir)‐catalyzed oxidative annulation reaction of isoquinolones with alkynes was investigated in detail. In the first acetate‐assisted C? H‐activation process (cyclometalated step) and the subsequent mono‐alkyne insertion into the M? C bonds of the cyclometalated compounds, both Rh and Ir complexes participated well. However, the desired final products, dibenzo[a,g]quinolizin‐8‐one derivatives, were only formed in high yield when the Rh species participated in the final oxidative coupling of the C? N bond. Moreover, a Rh^I sandwich intermediate was isolated during this transformation. The iridium complexes were found to be inactive in the oxidative coupling processes. All of the relevant intermediates were fully characterized and determined by single‐crystal X‐ray diffraction analysis. Based on this mechanistic study, a Rh^III→Rh^I→Rh^III catalytic cycle was proposed for this reaction.     

Enhancement of Solar Fuel Production Schemes by Using a Ru,Rh,Ru Supramolecular Photocatalyst Containing Hydroxide Labile Ligands

Polyazine‐bridged Ru^IIRh^IIIRu^II complexes with two halide ligands, Cl^? or Br^?, bound to the catalytically active Rh center are efficient single‐component photocatalysts for H₂O reduction to H₂ fuel, with the coordination environment on Rh impacting photocatalysis. Herein reported is a new, halide‐free Ru^IIRh^IIIRu^II photocatalyst with OH^? ligands bound to Rh, further enhancing the photocatalytic reactivity of the structural motif. H₂ production experiments using the photocatalyst bearing OH^? ligands at Rh relative to the analogues bearing halides at Rh in solvents of varying polarity (DMF, CH₃CN, and H₂O) suggest that ion pairing with halides deactivates photocatalyst function, representing an exciting phenomenon to exploit in the development of catalysts for solar H₂ production schemes.