A New Approach to 5-Thiosugars: 5-Thio-D-Gluconhydroximo-1,5-lactone,Synthesis and Evaluation as β-Glucosidase Inhibitor

The thiolactone oxime 10 was synthesized in ten steps from the known tri-O-benzylglucose 13 , which was transformed into the oxime 14 , silylated (→ 15 ), and mesylated (→ 16 ). Treatment of 16 with Bu₄NF yielded the L -ido-epoxide 17 and the hydroxylamine 18 ; the isomeric D -gluco-configurated hydroxylamine 20 was prepared from 17 . Reaction of 17 with thiourea yielded the thiirane 19 . Ring opening was best effected with HBr (→ 22 ·HBr). The N-glycosylhydroxylamine 22 was immediately oxidized to 24 , as it reverted to 19 . Similarly, 19 was transformed into the chlorides 21 and 23 . The iodide 25 reacted with TEMPO to afford 29 besides 26 and 30 ; nucleophilic substitution of 23 , 24 , or 25 gave unsatisfactory yields of 26 or 27 , and 28 . Birch reduction transformed 29 into 10 which was isolated via the pentaacetate 32 , which was also transformed into the tetraacetate 33 . The weak activity of 10 as an inhibitor of sweet-almond and Agrobacter β-glucosidase is in keeping with categorization of the lactone and lactam oximes 1–5 and the 5-thiosugars 6–9 as transition-state and substrate analogs, respectively.     

Antiulcer agents. 2. Pyridyl oxime ethers

A large number of pyridinecarboxaldehyde (and ketone) O-substituted oximes were prepared by alkylating the oxime or by treating the parent aldehyde (or ketone) with an O-substituted hydroxylamine. Many of these were converted to the N-oxide. Screening revealed that many of these oxime ethers were active in preventing gastric ulcers in rats. Data on selected examples is given.     

Basis and optimization of the indooxine method to determine oximes

Summary Consideration is given to a spectrophotometric method for determining oximes that involves acid hydrolysis followed by reaction of liberated hydroxylamine with 8-quinolinol to form a dye, indooxine (5-[(8-hydroxy-5-quinolyl)imino]-8-(5H)-quinolone). The various steps of the method, applied to pyruvic oxime (2-oximinopropanoic acid) as representative of -oximino acids, were investigated and optimized, leading to improvements in reproducibility and sensitivity over the existing procedure. Incomplete liberation of hydroxylamine from oximes is due largely to incomplete hydrolysis at equilibrium in acid solution. An additional cause with -oximino acids, as opposed to simple oximes, is decarboxylative dehydration to form the corresponding nitrile. Hydrolysis is more complete and nitrile formation less favored the lower the pH, at least in the pH range 0 to 2.5. The importance of calibration curves and the control of pH, time of hydrolysis and temperature in quantitative application of the method is emphasized. The method can be used quantitatively for determination of a single oxime but only semiquantitatively or qualitatively for determination of total oximes in an unknown mixture of oximes.     

Stereospecific 1,4‐Metallate Shift Enables Stereoconvergent Synthesis of Ketoximes

Reported herein is a stereospecific 1,4‐metallate rearrangement for single‐geometry ketoxime synthesis from oxime chlorides and arylboronic acids. This strategy exhibits broad substrate scope with excellent stereoselectivity under mild reaction conditions. In comparison with the conventional approaches, each configuration of unsymmetric diaryl oximes, as well as the thermodynamically less stable Z isomer of aryl alkyl ketoximes can be selectively and exclusively obtained. The reactivities of unsymmetric diaryl oximes and the Z isomer of aryl alkyl oximes, a class of underexplored molecules, enables efficient access to the corresponding isoquinolines, isoquinoline N‐oxides, and amides having a single configuration.     

Photochemical reactions of high polymers. XIV. Syntheses and photochemical reactions of copolymers bearing O-acyloxime groups

Copolymers bearing pendant O-acyloxime groups were synthesized by two methods: copolymerizations of oxime acrylate (methyl β-naphthyl ketone oxime acrylate or benzophenone oxime acrylate) and styrene, condensation of acrylic acid—styrene copolymer with oximes (benzophenone oxime, p-nitrobenzophenone oxime, methyl β-naphthyl ketone oxime, benzalacetone oxime or 9-fluorenone oxime). The photochemical behavior of the O-acyloxime copolymers changed markedly with the irradiation conditions: irradiation of benzene solutions led to degradation in air and crosslinking under nitrogen, while irradiation of solid films in air resulted in simultaneous degradation and crosslinking. Photolysis of methyl β-naphthyl ketone oxime acetate, a model for the O-acyloxime copolymer, in benzene solution under nitrogen resulted in scission of the N? O bond. The same reaction was observed in the irradiation of the O-acyloxime copolymers. It is suggested that formation of free radicals on the polymer chains via scission of the N? O bond is followed by decarboxylation. In the absence of oxygen, crosslinking of the polymer by recombination of the free radicals competes with degradation via β-scission. In the presence of oxygen, autoxidative degradation predominates.     

Ring opening reaction of 3,6-Dihydro-2-(1H)pyrimidinones with hydroxylamine hydrochloride

1,4,6-Trisubstituted 3,6-dihydro-2-(1H)pyrimidinones (Ia-d) easily underwent the ring opening reaction with hydroxylamine hydrochloride to afford the oximes (IIa-d) in good yields. In the case of 3,6-dihydro-6-methyl-I-phenyl-2-(1H)pyrimidinone (Ie), 2-anilinobutyronitrile (III) was obtained in addition to the oxime (IIe). Dihydro-2-(1H)pyrimidinone (IV) and -thiones (V and VI) did not undergo the ring opening reaction.     

Microwave-promoted one-pot conversion of alcohols to oximes using 1-methylimidazolium nitrate, [Hmim][NO3], as a green promoter and medium

A wide variety of oximes were prepared from different types of alcohols with hydroxylamine hydrochloride using 1-methylimidaziloum nitrate, [Hmim][NO₃], ionic liquid as a reaction medium and promoter under microwave irradiation. This protocol provides a one-pot oxime synthesis with high yields that is facile, eco-friendly and the ionic liquid can be recovered and reused.     

Electroreduction of aromatic oximes: diprotonation, adsorption, imine formation, and substituent effects

Aromatic oximes are reduced in aqueous solution in a four-electron process. The reducible species in the pH range 5-8 is a diprotonated form of the oxime. This species is generated in the course of electrolysis in the vicinity of the electrode surface from the adsorbed neutral form of the oxime. The reduction is initiated by a cleavage of the N-O bond. The diprotonation facilitates the reduction process by the preformation of OH2+ as a good leaving group and by a positive charge on the azomethine nitrogen. Diprotonation has been proven based on shapes of i = f(pH) plots, by observed shifts of half-wave potentials with pH and by comparison with the reduction of nitrones. Some observed deviations from theoretical i = f(pH) plots were attributed to the role of adsorption on the rate of protonation. Adsorption is also responsible for dips on some of the i-E curves. Adsorption plays a role at concentrations as low as 1 x 10(-5) M, when the electrode surface is still not fully covered. This indicates that catalyzed protonation occurs on islets of adsorbed materials. At pH 2-5 the studied oximes in the vicinity of the electrode are predominately present in a protonated form, which is less strongly adsorbed. In this pH range the protonation takes place in a homogeneous reaction layer of the electrode. It yields a monoprotonated form, which is reduced. The separation of two two-electron waves observed for some oximes in acidic media serves as an experimental proof of the formation of imines as reduction intermediates. This separation is caused by the differences in pKa values of protonated forms of oximes and imines. The effects of substituents in the para position on the benzene ring are characterized by correlation with the Hammett substituent constant sigmax. This has been proven at pH 1.5 for substituted benzaldehyde oximes and at pH 5.0 for substituted acetophenone oximes.     

New Estrone Oxime Derivatives: Synthesis,Cytotoxic Evaluation and Docking Studies

The interest in the introduction of the oxime group in molecules aiming to improve their biological effects is increasing. This work aimed to develop new steroidal oximes of the estrane series with potential antitumor interest. For this, several oximes were synthesized by reaction of hydroxylamine with the 17-ketone of estrone derivatives. Then, their cytotoxicity was evaluated in six cell lines. An estrogenicity assay, a cell cycle distribution analysis and a fluorescence microscopy study with Hoechst 3358 staining were performed with the most promising compound. In addition, molecular docking studies against estrogen receptor α, steroid sulfatase, 17β-hydroxysteroid dehydrogenase type 1 and β-tubulin were also accomplished. The 2-nitroestrone oxime showed higher cytotoxicity than the parent compound on MCF-7 cancer cells. Furthermore, the oximes bearing halogen groups in A-ring evidenced selectivity for HepaRG cells. Remarkably, the Δ^9,11-estrone oxime was the most cytotoxic and arrested LNCaP cells in the G₂/M phase. Fluorescence microscopy studies showed the presence of condensed DNA typical of prophase and condensed and fragmented nuclei characteristic of apoptosis. However, this oxime promoted the proliferation of T47-D cells. Interestingly, molecular docking studies estimated a strong interaction between Δ^9,11-estrone oxime and estrogen receptor α and β-tubulin, which may account for the described effects.     

Synthesis of acenaphtho[1,2-x]heterocycles and spiro[acenaphthylene 1-isoxazoles]

Methyl (Z)-(1,2-dihydro-2-oxo-1-acenaphthylenylidene)acetate 1 gives with hydroxylamine the oximes 2 and the pyrrole derivative 4 , whereas with hydrazines affords the pyridazinones 5 and 6 . A pyridazine derivative 8 is also isolated from the reaction of (1,2-dihydro-2-oxo-1-acenaphthylenylidene)acetone 7 with hydrazine hydrate. Reaction between the spiro-derivative 9 and hydroxylamine hydrochloride gives oxime 10 , whereas Wittig olefination of 9 with ylide 11 yields compound 12 which by reaction with 2,4,6-trimethylbenzonitrile oxide ( 13 ) affords the dispiro-derivatives 14 . Finally from the reaction of acenaphthylene-1,2-quinone ( 17 ) with the bisylide 16 the acenaphtho[1,2-c]thiophene ( 18 ) is formed.     

15N chemical shifts of a series of isatin oxime ethers and their corresponding nitrone isomers

In this article, we describe the characteristic ¹⁵N chemical shifts of isatin oxime ethers and their isomer nitrone. These oxime ethers and nitrones are the alkylation reaction products of isatin oximes. In our study, the ¹⁵N chemical shifts observed in these oxime ethers were in the 402–408 (or 22–28) ppm range, although those for their corresponding nitrone series were in the 280–320 (or ?100 to ?60) ppm range. This remarkable difference in ¹⁵N NMR chemical shift values could potentially be used to determine the O‐ versus N‐alkylation of oximes, even when only one isomer is available. In this paper, the differences in ¹⁵N NMR chemical shifts serve as the basis for a discussion about how to distinguish both regioisomers derived from the oximes alkylation. Copyright © 2010 John Wiley & Sons, Ltd.     

Fragmentation of oxime and silyl oxime ether odd‐electron positive ions by the McLafferty rearrangement: new insights on structural factors that promote α,β fragmentation

The McLafferty rearrangement is an extensively studied fragmentation reaction for the odd‐electron positive ions from a diverse range of functional groups and molecules. Here, we present experimental and theoretical results of 12 model compounds that were synthesized and investigated by GC‐TOF MS and density functional theory calculations. These compounds consisted of three main groups: carbonyls, oximes and silyl oxime ethers. In all electron ionization mass spectra, the fragment ions that could be attributed to the occurrence of a McLafferty rearrangement were observed. For t‐butyldimethylsilyl oxime ethers with oxygen in a β‐position, the McLafferty rearrangement was accompanied by loss of the t‐butyl radical. The various mass spectra showed that the McLafferty rearrangement is relatively enhanced compared with other primary fragmentation reactions by the following factors: oxime versus carbonyl, oxygen versus methylene at the β‐position and ketone versus aldehyde. Calculations predict that the stepwise mechanism is favored over the concerted mechanism for all but one compound. For carbonyl compounds, C–C bond breaking was the rate‐determining step. However, for both the oximes and t‐butyldimethylsilyl oxime ethers with oxygen at the β‐position, the hydrogen transfer step was rate limiting, whereas with a CH₂ group at the β‐position, the C–C bond breaking was again rate determining. n‐Propoxy‐acetaldehyde, bearing an oxygen atom at the β‐position, is the only case that was predicted to proceed through a concerted mechanism. The synthesized oximes exist as both the (E)‐ and (Z)‐isomers, and these were separable by GC. In the mass spectra of the two isomers, fragment ions that were generated by the McLafferty rearrangement were observed. Finally, fragment ions corresponding to the McLafferty reverse charge rearrangement were observed for all compounds at varying relative ion intensities compared with the conventional McLafferty rearrangement. Copyright © 2012 John Wiley & Sons, Ltd.     

Effect of structure in benzaldehyde oximes on the formation of aldehydes and nitriles under photoinduced electron-transfer conditions

The mechanistic aspects of the photosensitized reactions of a series of benzaldehyde oximes (1a-o) were studied by steady-state (product studies) and laser flash photolysis methods. Nanosecond laser flash photolysis studies have shown that the reaction of the oxime with triplet chloranil (3CA) proceeds via an electron-transfer mechanism provided the free energy for electron transfer (DeltaG(ET)) is favorable; typically, the oxidation potential of the oxime should be below 2.0 V. Substituted benzaldehyde oximes with oxidation potentials greater than 2.0 V quench 3CA at rates that are independent of the substituent and the oxidation potential. The most likely mechanism under these conditions is a hydrogen atom transfer mechanism as this reaction should be dependent on the O-H bond strength only, which is virtually the same for all oximes. Product studies have shown that aldoximes react to give both the corresponding aldehyde and the nitrile. The important intermediate in the aldehyde pathway is the iminoxyl radical, which is formed via an electron transfer-proton transfer (ET-PT) sequence (for oximes with low oxidation potentials) or via a hydrogen atom transfer (HAT) pathway (for oximes with larger oxidation potentials). The nitriles are proposed to result from intermediate iminoyl radicals, which can be formed via direct hydrogen atom abstraction or via an electron-transfer-proton-transfer sequence. The experimental data seems to support the direct hydrogen atom abstraction as evidenced by the break in linearity in the plot of the quenching rates against the oxidation potential, which suggests a change in mechanism. The nitrile product is favored when electron-accepting substituents are present on the benzene ring of the benzaldehyde oximes or when the hydroxyl hydrogen atom is unavailable for abstraction. The latter is the case in pyridine-2-carboxaldoxime (2), where a strong intramolecular hydrogen bond is formed. Other molecules that form weaker intramolecular hydrogen bonds such as 2-furaldehyde oxime (3) and thiophene-2-carboxaldoxime (4) tend to yield increasing amounts of aldehyde.     

Different hydrogen‐bonding modes in two closely related oximes

Two closely related oximes, namely 1‐chloroacetyl‐3‐ethyl‐2,6‐diphenylpiperidin‐4‐one oxime, C₂₁H₂₃ClN₂O₂, (I), and 1‐chloroacetyl‐2,6‐diphenyl‐3‐(propan‐2‐yl)piperidin‐4‐one oxime, C₂₂H₂₅ClN₂O₂, (II), despite their identical sets of hydrogen‐bond donors and acceptors, display basically different hydrogen‐bonding patterns in their crystal structures. While the molecules of (I) are organized into typical centrosymmetric dimers, created by oxime–oxime O—H...N hydrogen bonds, in the structure of (II) there are infinite chains of molecules connected by O—H...O hydrogen bonds, in which the carbonyl O atom from the chloroacetyl group acts as the hydrogen‐bond acceptor. Despite the differences in the hydrogen‐bond schemes, the –OH groups are always in typical anti positions (C—N—O—H torsion angles of ca 180°). The oxime group in (I) is disordered, with the hydroxy groups occupying two distinct positions and C—C—N—O torsion angles of approximately 0 and 180° for the two alternatives. This disorder, even though the site‐occupancy factor of the less occupied position is as low as ca 0.06, is also observed at lower temperatures, which seems to favour the statistical and not the dynamic nature of this phenomenon.     

Deoximation Reaction in Room Temperature Ionic Liquids under Mild Conditions

Deoximation in metal chloride ionic liquids based on 1‐alkyl‐3‐methylimidazolium and triethylene ammonium cations, such as AmimBr(Cl)‐MCl_x(A=ethyl, butyl, benzyl; M=Al, Fe, Cu, Sn and Zn; x=2, 3) and Et₃NHCl‐FeCl₃ were investigated under mild conditions. Ferrate chloride ionic liquid was proved to be an effective catalyst for deoximation of cyclohexanone oxime, exhibiting high conversion of oximes and selectivity to cyclohexanone. Good performance for the deoximation of other oximes such as salicylald oxime, acetone oxime, benzophenone oxime, 4‐nitrobenzald oxime, acetophenone oxime, 2‐chlorobenzaldehyde oxime, Acetald oxime, 2‐butanone oxime and (1R)‐camphor oxime was also achieved with bmimBr‐FeCl₃ as catalyst and solvent. The deoximation was determined to carry out via acid‐catalytic hydrolysis and the reaction mechanism was proposed.     

A proposed structure for the copper(ii) salts of α-acyloin oximes

The behavior of the copper (II) salts of the a-isomers of some acyloin oximes towards a series of selected amines was examined in order to study the unusual solubility relationships which these copper salts exhibit towards ammonium hydroxide. The insolubility in ammonium hydroxide of these copper salts of acyloin oximes has been attributed to their being inner complex salts. Evidence is presented which is contra y to this view. Based on the solubilities of the copper (II) salts investigated, a polymeric structure for copper (II) acyloin oximes is proposed. The study included the following α-isomers of acyloin oximes: benzoin oxime, 2,2'-furoin oxime, phenylbenzoin oxime, methylbenzoin oxime, 2,2'thenoin oxime, a-hydroxyisobutyrophenone oxime, and α-hydroxyacetophenone oxime. The last four compounds had not been examined previously as to their ability to form copper (II) salts.     

Synthesis,structure and reactions of seco-steroids containing a medium-sized ring—IX : Reactions of Δ1(10)-unsaturated 5-oxo-5,10-seco-steroids with hydroxylamine and n-methylhydroxylamine

When treated with hydroxylamine or N-methylhydroxylamine, in the presence of proton donor catalysts, trans-Δ¹⁽¹⁰⁾-unsaturated 5-oxo-5,10-seco-steroids, such as 3 (but not the corresponding diastereomeric cis-compounds), are converted stereospecifically and in good yield to isoxazolidine derivatives (e.g. 4 and 13), resulting from transannular 1,3-dipolar addition of the intermediately formed oximes and nitrones to the trans-double bond in the cyclodecene ring moiety of the seco-steroid system. Reactions are described and physical evidence is presented which establish the constitution and configuration of the isoxazolidine-containing cycloaddition products, and the mechanistic and steric course of this transannular ring closure process is discussed.     

Utility of the iridium complex of the pybox ligand in regio- and enantioselective allylic substitution

The viability of the iridium complex of pybox as chiral catalyst in allylic substitutions and the enantioselective synthesis of branched products was studied. Among several chiral ligands evaluated, the iridium complex of pybox having a phenyl group catalyzed the reaction with high activity to form the branched amines with good enantioselectivities when hydroxylamine, amine, and aniline were employed as a nucleophile. The allylic substitution with oximes proceeded smoothly to give the branched oxime ethers with good enantioselectivities. [reaction: see text]     

O-Alkylation of Menthone Oxime: Synthesis and 13C NMR Studies of a Series of Novel Oxime Ethers

A series of novel menthone oxime ethers were synthesized in three steps starting from (–)-menthol. Analysis of the ¹³C NMR chemical shift differences between α carbons of oxime derivatives (O-alkyl oximes) provides a convenient and reliable means of assigning oxime stereochemistry. It has been found that carbons syn to the oxime are shifted more upfield than carbons anti to the oxime moiety. Significant E products were obtained.     

Studies in pyran,its analogs,and related compounds

The lithium aluminum hydride reduction of the ethers and tosylates of chroman-4-one oxime and related compounds has been studied. It has been found that the ethers of the oximes, like the oximes, do not undergo a normal, but rather an anomalous, reduction. The tosylates of the oximes exhibit a higher tendency to undergo anomalous reduction than the corresponding oximes. During the synthesis of the ethers of the oximes it was established that the use of dimethylformamide as the medium for alkylation of the oxime salts helps to suppress the side reaction forming nitrones.For part XXXVII, see [23].