Kinetic capillary electrophoresis-based affinity screening of aptamer clones

DNA aptamers are single stranded DNA (ssDNA) molecules artificially selected from random-sequence DNA libraries for their specific binding to a certain target. DNA aptamers have a number of advantages over antibodies and promise to replace them in both diagnostic and therapeutic applications. The development of DNA aptamers involves three major stages: library enrichment, obtaining individual DNA clones, and the affinity screening of the clones. The purpose of the screening is to obtain the nucleotide sequences of aptamers and the binding parameters of their interaction with the target. Highly efficient approaches have been recently developed for the first two stages, while the third stage remained the rate-limiting one. Here, we introduce a new method for affinity screening of individual DNA aptamer clones. The proposed method amalgamates: (i) aptamer amplification by asymmetric PCR (PCR with a primer ratio different from unity), (ii) analysis of aptamer-target interaction, combining in-capillary mixing of reactants by transverse diffusion of laminar flow profiles (TDLFP) and affinity analysis using kinetic capillary electrophoresis (KCE), and (iii) sequencing of only aptamers with satisfying binding parameters. For the first time we showed that aptamer clones can be directly used in TDLFP/KCE-based affinity analysis without an additional purification step after asymmetric PCR amplification. We also demonstrated that mathematical modeling of TDLFP-based mixing allows for the determination of K_d values for the in-capillary reaction of an aptamer and a target and that the obtained K_d values can be used for the accurate affinity ranking of aptamers. The proposed method does not require the knowledge of aptamer sequences before screening, avoids lengthy (3-5 h) purification steps of aptamer clones, and minimizes reagent consumption to nanoliters.     

Selection and Identification of Chloramphenicol-Specific DNA Aptamers by Mag-SELEX

Chloramphenicol (CAP) has been widely used to treat bacterial infections in livestock and aquatic animals. To reduce the risk of CAP residues, an efficient technology to rapidly detect CAP residues in animal-sourced food is expressly needed. In this study, magnetic bead-based systematic evolution of ligands by exponential enrichment (Mag-SELEX) strategy was performed to select and identify CAP-specific single-stranded DNA (ssDNA) aptamers from a random oligonucleotide library. After nine rounds of selection, five potential ssDNA aptamers were selected. Low homology indicated that they might belong to different families. To identify an aptamer with the highest affinity for CAP, the dissociation constant (K _d) values of these selected aptamers were determined. The lowest K _d values of two potential aptamers (i.e., No. 4 and No. 5) were, respectively, 0.10162 ± 0.0111 and 0.03224 ± 0.00819 μM, which were much lower than previously reported lowest K _d value (i.e., 0.766 μM) of CAP aptamer. Moreover, compared with No. 4, aptamer No. 5 had higher binding rate, which is quite different among those with CAP and with CAP’s structural analogs (i.e., thiamphenicol (TAP) and florfenicol (FF)). These results indicated that the potential aptamer No. 5 with highest specificity and affinity for CAP would be an ideal aptamer for future detection of residual CAP in animal-sourced food.     

Selective Hemin Binding by a Non-G-quadruplex Aptamer with Higher Affinity and Better Peroxidase-like Activity

Previous aptamers for porphyrins and metalloporphyrins were all guanine-rich sequences that can fold in G-quadruplex structures. Due to stacking-based binding, these aptamers can hardly tell different porphyrins apart, and they can also bind other planar molecules, hindering their practical applications. In this work, we used the capture selection method to obtain aptamers for hemin and protoporphyrin IX (PPIX). The hemin aptamer (Hem1) features two highly conserved repeating binding loops, and it cannot form a G-quadruplex, which was supported by its Mg²⁺-dependent but K⁺-independent hemin binding and CD spectroscopy. Isothermal titration calorimetry revealed much higher enthalpy change for the new aptamer, and the best aptamer showed a K_d of 43 nM hemin. Hem1 can also enhance the peroxidase-like activity of hemin. This work demonstrates that aptamers have alternative ways to bind porphyrins allowing selective recognition of different porphyrins.     

Streptavidin binding bifunctional aptamers and their interaction with low molecular weight ligands

This paper describes the measurement of the binding affinities of two bifunctional RNA aptamers to their respective ligands. The aptamers comprise either a theophylline or malachite green binding sequence fused to a streptavidin binding sequence. These bifunctional aptamers are shown to bind simultaneously to both the small ligand and to streptavidin whether in free solution or on gold surfaces. Binding isotherms for both interactions were measured by different physiochemical techniques: surface plasmon resonance, fluorescence spectroscopy and dynamic light scattering. Both qualitatively and quantitatively there is little difference in binding affinities between the bifunctional aptamers and their monofunctional components. The respective K_d values for streptavidin binding in the monofunctional aptamer and in the theophylline bifunctional aptamer were 12 nM and 65 nM, respectively whilst the K_d values for theophylline binding in the monofunctional aptamer and the streptavidin bifunctional aptamer were 300 nM and 120 nM. These results are consistent with treating each aptamer sequence as a module that can be combined with others without significant loss of function. This allows for the use of streptavidin based immobilization strategies without either the cost of biotinylated dNTPs or the variable yields associated with the chemical biotinylation of RNA.     

Isolation and Characterization of a ssDNA Aptamer against Major Soluble Antigen of Renibacterium salmoninarum

Bacterial kidney disease (BKD) is a major health problem of salmonids, affecting both wild and cultured salmon. The disease is caused by Renibacterium salmoninarum (Rs), a fastidious, slow-growing and strongly Gram-positive diplobacillus that produces chronic, systemic infection characterized by granulomatous lesions in the kidney and other organs, often resulting in death. Fast detection of the pathogen is important to limit the spread of the disease, particularly in hatcheries or aquaculture facilities. Aptamers are increasingly replacing conventional antibodies as platforms for the development of rapid diagnostic tools. In this work, we describe the first instance of isolating and characterizing a ssDNA aptamer that binds with high affinity to p57 or major soluble antigen (MSA), the principal antigen found on the cell wall surface of Rs. Specifically, in this study a construct of the full-length protein containing a DNA binding domain (MSA-R2c) was utilized as target. Aptamers were isolated from a pool of random sequences using GO-SELEX (graphene oxide-systematic evolution of ligands by exponential enrichment) protocol. The selection generated multiple aptamers with conserved motifs in the random region. One aptamer with high frequency of occurrence in different clones was characterized and found to display a strong binding affinity to MSA-R2c with a K_d of 3.0 ± 0.6 nM. The aptamer could be potentially utilized for the future development of a sensor for rapid and onsite detection of Rs in water or in infected salmonids, replacing time-consuming and costly lab analyses.     

Selection of aptamers for signal transduction proteins by capillary electrophoresis

High‐affinity aptamers for important signal transduction proteins, i.e. Cdc42‐GTP, p21‐activated kinase1 (PAK1) and MRCK (myotonic dystrophy kinase‐related Cdc42‐binding kinase) α were successfully selected in the low micro‐ to nanomolar range using non‐systematic evolution of ligands by exponential enrichment (SELEX) with at least three orders of magnitude enhancement from their respective bulk affinity of naïve DNA library. In the non‐SELEX procedure, CE was used as a highly efficient affinity method to select aptamers for the desired molecular target through a process that involved repetitive steps of partitioning, known as non‐equilibrium CE of equilibrium mixtures with no PCR amplification between successive steps. Various non‐SELEX conditions including the type, concentration and pH of the run buffer were optimized. Other considerations such as salt composition of selection buffer, protein concentration and sample injection size were also studied for high stringency during selection. After identifying the best enriched aptamer pool, randomly selected clones from the aptamer pool were sequenced to obtain the individual DNA sequences. The dissociation constants (K_d) of these sequences were in the low micromolar to nanomolar range, indicating high affinity to the respective proteins. The best binders were also subjected to sequence alignment to generate a phylogenetic tree. No significant consensus region based on approximately 50 sequences for each protein was observed, suggesting the high efficiency of non‐SELEX for the selection of numerous unique sequences with high selectivity.     

Synthesis of a liposome incorporated 1-carboxyalkylxanthine-phospholipid conjugate and its recognition by an RNA aptamer

RNA or DNA aptamers have received much attention in recent literature as therapeutic agents and chromatographic matrices, however, their use in analytical methodologies is relatively unexplored. We describe here investigations aiming to combine this promising technology with versatile liposomes in a competitive assay format. Thus, a phospholipid derivative of an unsymmetrical 1,3-disubstituted xanthine (1-carboxyethyl-3-methylxanthine-DPPE) was prepared for incorporation into the lipid bilayers of dye-encapsulating liposomes. Its synthesis and characterization using GC-MS, ¹H NMR, and HPLC are described. Equilibrium filtration experiments using enzyme linked immunosorbent assays (ELISAs) were completed to assess the affinity for theophylline of an unmodified RNA aptamer and one that had been modified on the 3′ end with biotin. A dissociation constant (K_d) for theophylline with the unmodified RNA aptamer of 0.9 μM and biotinylated aptamer of 1.0 μM was determined which showed that this modification did not affect the aptamer's affinity using this technique. The observed K_d values correlated well to the previously reported value of 0.6 μM. Experiments were also carried out in a competitive manner with the prepared 1-carboxypropyl-3-methylxanthine intermediate, and the final 1-carboxypropyl-3-methylxanthine-DPPE conjugate once it had been incorporated into the bilayers of liposomes. The K_d value for 1-carboxypropyl-3-methylxanthine was approximately 2.7 μM. Finally, successful binding to theophylline-analog-tagged liposomes in a competitive assay format was shown versus liposomes prepared without the tag.     

Development of a CD63 Aptamer for Efficient Cancer Immunochemistry and Immunoaffinity-Based Exosome Isolation

CD63, a member of transmembrane-4-superfamily of tetraspanin proteins and a highly N-glycosylated type III lysosomal membrane protein, is known to regulate malignancy of various types of cancers such as melanoma and breast cancer and serves as a potential marker for cancer detection. Recently, its important role as a classic exosome marker was also emphasized. In this work, via using a magnetic bead-based competitive SELEX (systematic evolution of ligands by exponential enrichment) procedure and introducing a 0.5 M NaCl as elution buffer, we identified two DNA aptamers (CD63-1 and CD63-2) with high affinity and specificity to CD63 protein (K_d = 38.71 nM and 78.43, respectively). Furthermore, CD63-1 was found to be efficient in binding CD63 positive cells, including breast cancer MDA-MB-231 cells and CD63-overexpressed HEK293T cells, with a medium binding affinity (K_d ~ 100 nM) as assessed by flow cytometry. When immunostaining assay was performed using clinical breast cancer biopsy, the CD63-1 aptamer demonstrated a comparable diagnostic efficacy for CD63 positive breast cancer with commercial antibodies. After developing a magnetic bead-based exosome immunoaffinity separation system using CD63-1 aptamer, it was found that this bead-based system could effectively isolate exosomes from both MDA-MB-231 and HT29 cell culture medium. Importantly, the introduction of the NaCl elution in this work enabled the isolation of native exosomes via a simple 0.5M NaCl incubation step. Based on these results, we firmly believe that the developed aptamers could be useful towards efficient isolation of native state exosomes from clinical samples and various theranostic applications for CD63-positive cancers.     

Binding Characteristics Study of DNA based Aptamers for E. coli O157:H7

E. coli O157:H7 is a pathogenic bacterium producing verotoxins that could lead to serious complications such as hemolytic uremia syndrome. Fast detection of such pathogens is important. For rapid detection, aptamers are quickly gaining traction as alternative biorecognition molecules besides conventional antibodies. Several DNA aptamers have been selected for E. coli O157:H7. Nonetheless, there has not been a comparative study of the binding characteristics of these aptamers. In this work, we present a comprehensive analysis of binding characteristics including binding affinity (K_d) and binding capacity (B_max) of DNA-based aptamers for E. coli O157:H7 using qPCR. Our results show that aptamer E18R has the highest binding capacity to E. coli 157:H7 and the highest specificity over non-pathogenic E. coli strains K12 and DH5α. Our study also finds that the common biotin-tag modification at 5′ end typically changes the binding capacity significantly. For most of the selected aptamers, the binding capacity after a biotin-tag modification decreases. There exists a discrepancy in the binding capability between the selected aptamer and the aptamer used for detection. Our study also shows that a lower concentration of Mg²⁺ ions in the binding buffer leads to a decrease in the binding capacity of E17F and E18R, while it does not affect the binding capacity of S1 and EcoR1.     

Simultaneous Detection of L-Lactate and D-Glucose Using DNA Aptamers in Human Blood Serum**

L-lactate is a key metabolite indicative of physiological states, glycolysis pathways, and various diseases such as sepsis, heart attack, lactate acidosis, and cancer. Detection of lactate has been relying on a few enzymes that need additional oxidants. In this work, DNA aptamers for L-lactate were obtained using a library-immobilization selection method and the highest affinity aptamer reached a K_d of 0.43 mM as determined using isothermal titration calorimetry. The aptamers showed up to 50-fold selectivity for L-lactate over D-lactate and had little responses to other closely related analogs such as pyruvate or 3-hydroxybutyrate. A fluorescent biosensor based on the strand displacement method showed a limit of detection of 0.55 mM L-lactate, and the sensor worked in 90 % serum. Simultaneous detection of L-lactate and D-glucose in the same solution was achieved. This work has broadened the scope of aptamers to simple metabolites and provided a useful probe for continuous and multiplexed monitoring.     

Aptamer-based label-free method for hemin recognition and DNA assay by capillary electrophoresis with chemiluminescence detection

An aptamer-based label-free approach to hemin recognition and DNA assay using capillary electrophoresis with chemiluminescence detection is introduced here. Two guanine-rich DNA aptamers were used as the recognition element and target DNA, respectively. In the presence of potassium ions, the two aptamers folded into the G-quartet structures, binding hemin with high specificity and affinity. Based on the G-quartet–hemin interactions, the ligand molecule was specifically recognized with a K _d ≈ 73 nM, and the target DNA could be detected at 0.1 μM. In phosphate buffer of pH 11.0, hemin catalyzed the H₂O₂-mediated oxidation of luminol to generate strong chemiluminescence signal; thus the target molecule itself served as an indicator for the molecule–aptamer interaction, which made the labeling and/or modification of aptamers or target molecules unnecessary. This label-free method for molecular recognition and DNA detection is therefore simple, easy, and effective. Figure A label-free approach to aptamer-based hemin recognition and DNA detection is introduced, which gives great potential for using a small molecule itself as the indicator for molecular recognition and DNA detection thereby avoiding any labeling or modification step     

Selection and identification of ssDNA aptamers recognizing zearalenone

Zearalenone (ZEN) is a nonsteroidal estrogenic mycotoxin produced by Fusarium graminearum on maize and barley. Because most current methods of ZEN detection rely on the use of low-stability antibodies or expensive equipment, we sought to develop a rapid, low-cost determination method using aptamers instead of antibodies as the specific recognition ligands. This work describes the isolation and identification of single-stranded DNA (ssDNA) aptamers recognizing ZEN using the modified systematic evolution of ligands by exponential enrichment methodology based on magnetic beads. After 14 rounds of repeated selection, a highly enriched ssDNA library was sequenced and 12 representative sequences were assayed for their affinity and specificity. The best aptamer, 8Z₃₁, with a dissociation constant (K _d) of 41?±?5 nM, was successfully applied in the specific detection of ZEN in binding buffer and in real samples based on a magnetic separation/preconcentration procedure. This analytical method provided a linear range from 3.14?×?10^?9 to 3.14?×?10^?5 M for ZEN, and the detection limit was 7.85?×?10^?10 M. The selected aptamers are expected to be used in the potential development of affinity columns, biosensors, or other analytical systems for the determination of ZEN in food and agricultural products.

Probing high-affinity 11-mer DNA aptamer against Lup an 1 (β-conglutin)

Aptamers are synthetic nucleic acids with great potential as analytical tools. However, the length of selected aptamers (typically 60–100 bases) can affect affinity, due to the presence of bases not required for interaction with the target, and therefore, the truncation of these selected sequences and identification of binding domains is a critical step to produce potent aptamers with higher affinities and specificities and lowered production costs. In this paper we report the truncation of an aptamer that specifically binds to β-conglutin (Lup an 1), an anaphylactic allergen. Through comparing the predicted secondary structures of the aptamers, a hairpin structure with a G-rich loop was determined to be the binding motif. The highest affinity was observed with a truncation resulting in an 11-mer sequence that had an apparent equilibrium dissociation constant (K _D) of 1.7?×?10^?9 M. This 11-mer sequence was demonstrated to have high specificity for β-conglutin and showed no cross-reactivity to other lupin conglutins (α-, δ-, γ-conglutins) and closely related proteins such as gliadin. Finally, the structure of the truncated 11-mer aptamer was preliminarily elucidated, and the GQRS Mapper strongly predicted the presence of a G-quadruplex, which was subsequently corroborated using one-dimensional NMR, thus highlighting the stability of the truncated structure.     

Evaluation of Relative Aptamer Binding to Campylobacter jejuni Bacteria Using Affinity Probe Capillary Electrophoresis

Abstract

A qualitative capillary electrophoresis immunoassay was developed for the first-time to evaluate aptamer binding to bacterial cells. Binding affinity of aptamers developed against a Campylobacter jejuni bacterial cell target, relative to other common food-borne pathogens was investigated and specific binding affinity was evidenced by pronounced mobility shift and peak broadening with increasing bacteria concentration for both aptamers. Little to no mobility shift was observed for food-borne pathogens, Salmonella typhirium and Escherichia coli, even when increasing concentrations 10-fold over target. These results suggest that affinity probe capillary electrophoresis could be useful for qualitative screening of aptamer candidates for bacterial cell targets.     

Intercalation of Proflavine in ssDNA Aptamers: Effect on Binding of the Specific Target Chloramphenicol

The structural modification of ssDNA‐based aptamers upon specific binding of its target molecule leads to changes of the charge‐transfer resistance (R_ct) of a negatively‐charged free‐diffusing redox probe. The aptamer adopts a structure due to self‐hybridization which is stabilized using profalvine as intercalator. The pre‐organized aptamer structure is used to detect chloramphenicol (CAP) requiring a substantial change of the aptamer structure indicated by a CAP concentration dependent increase in the R_ct values. Pre‐incubation of the aptamer‐modified electrode with an intercalator allows for the modulation of the aptamer/target interaction and hence for a modulation of the CAP‐dependent variation of the R_ct values.     

Selective collection and detection of MCF-7 breast cancer cells using aptamer-functionalized magnetic beads and quantum dots based nano-bio-probes

A novel strategy for selective collection and detection of breast cancer cells (MCF-7) based on aptamer–cell interaction was developed. Mucin 1 protein (MUC1) aptamer (Apt1) was covalently conjugated to magnetic beads to capture MCF-7 cell through affinity interaction between Apt1 and MUC1 protein that overexpressed on the surface of MCF-7 cells. Meanwhile, a nano-bio-probe was constructed by coupling of nucleolin aptamer AS1411 (Apt2) to CdTe quantum dots (QDs) which were homogeneously coated on the surfaces of monodispersed silica nanoparticles (SiO₂ NPs). The nano-bio-probe displayed similar optical and electrochemical performances to free CdTe QDs, and remained high affinity to nucleolin overexpressed cells through the interaction between AS1411 and nucleolin protein. Photoluminescence (PL) and square-wave voltammetric (SWV) assays were used to quantitatively detect MCF-7 cells. Improved selectivity was obtained by using these two aptamers together as recognition elements simultaneously, compared to using any single aptamer. Based on the signal amplification of QDs coated silica nanoparticles (QDs/SiO₂), the detection sensitivity was enhanced and a detection limit of 201 and 85 cells mL⁻¹ by PL and SWV method were achieved, respectively. The proposed strategy could be extended to detect other cells, and showed potential applications in cell imaging and drug delivery.     

Affinity of aptamers binding 33-mer gliadin peptide and gluten proteins: Influence of immobilization and labeling tags

Aptamers are starting to increase the reagents tool box to develop more sensitive and reliable methods for food allergens. In most of these assays, aptamers have to be modified for detection and/or immobilization purposes. To take full advantage of their affinity, which decisively influence the detectability, these modifications must be faced rationally. In this work, a recently developed aptamer for an immunotoxic peptide of gliadin associated to celiac disease is used in different configurations and modified with various markers and anchored groups to evaluate the influence of such modifications on the real affinity. The interaction in solution with the peptide is strong for a relatively small molecule (K_d = 45 ± 10 nM, 17 °C) and slightly stronger than that for the immobilized intact protein due to a cooperative binding effect. Comparatively, while only minor differences were found when the peptide or the aptamer were immobilized, labeling with a biotin resulted preferable over fluorescein (K_d = 102 ± 11 vs 208 ± 54 nM, 25 °C). These findings are of prime importance for the design of an aptamer-based analytical method for gluten quantification.     

Label‐ and modification‐free‐based in situ selection of bovine serum albumin specific aptamer

Systematic evolution of ligands by exponential enrichment is a traditional approach to select aptamer, which has a great potential in biosensing field. However, chemical modifications of DNA library or targets before selection might block the real recognition and binding sites between aptamers and their targets. In this study, a label‐ and modification‐free‐based in situ selection strategy was developed to overcome this limitation. The strategy is an attempt to screen bovine serum albumin aptamers according to the principle of electrophoretic mobility shift assay, and allowed single‐stranded DNA sequence to be fully exposed to interact with bovine serum albumin which was mixed with the agarose gel beforehand. After eight rounds of selection, specific aptamer with low dissociation constant (K_d) value of 69.44 ± 7.60 nM was selected and used for subsequent establishment of fluorescence biosensor. After optimization, the optimal aptasensor exhibited a high sensitivity toward bovine serum albumin with a limit of detection of 0.24 ng/mL (linear range from 1 to 120 ng/mL). These results indicated that the label‐ and modification‐free‐based in situ selection strategy proposed in this work could effectively select specific aptamer to develop aptasensor for sensitive detection of bovine serum albumin or other targets in actual complicated samples.     

A label-free electrochemical biosensor based on a DNA aptamer against codeine

In order to develop a sensor for opium alkaloid codeine detection, DNA aptamers against codeine were generated by SELEX (systematic evolution of ligands by exponential enrichment) technique. An aptamer HL7-14, which is a 37-mer sequence with K_d values of 0.91 μM, was optimized by the truncation-mutation assay. The specificity investigation shows that HL7-14 exhibits high specificity to codeine over morphine, and almost cannot bind to other small molecule. With this new selected aptamer, a novel electrochemical label-free codeine aptamer biosensor based on Au-mesoporous silica nanoparticles (Au-MSN) as immobilized substrate has been proposed using [Fe(CN)₆]^3−/4− as electroactive redox probe. The linear range covered from 10 pM to 100 nM with correlation coefficient of 0.9979 and the detection limit was 3 pM. Our study demonstrates that the biosensor has good specificity, stability and well regeneration. It can be used to detect codeine.