Improving Broadband White-Light Emission Performances of 2D Perovskites by Subtly Regulating Organic Cations

Recently, 2D organic–inorganic hybrid lead halide perovskites have attracted intensive attention in solid-state luminescence fields such as single-component white-light emitters, and rational optimization of the photoluminescence (PL) performance through accurate structural-design strategies is still significant. Herein, by carefully choosing homologous aliphatic amines as templates, isotypical perovskites [DMEDA]PbCl₄ ( 1 , DMEDA=N,N-dimethylethylenediamine) and [DMPDA]PbCl₄ ( 2 , DMPDA=N,N-dimethyl-1,3-diaminopropane) having tunable and stable broadband bluish white emission properties were rationally designed. The subtle regulation of organic cations leads to a higher degree of distortion of the 2D [PbCl₄]²⁻ layers and enhanced photoluminescence quantum efficiencies (<1 % for 1 and 4.9 % for 2 ). The broadband light emissions could be ascribed to self-trapped excitons on the basis of structural characterization, time-resolved PL, temperature-dependent PL emission, and theoretical calculations. This work gives a new guidance to rationally optimize the PL properties of low-dimensional halide perovskites and affords a platform to probe the structure–property relationship.     

Mn2+掺杂准二维钙钛矿(PEA)2PbyMn1-yBr4的制备及其电致发光性能

制备了具有高荧光量子产率(photoluminescence quantum yield, PLQY)的 Mn²⁺掺杂准二维钙钛矿(PEA)₂Pb_yMn_1-yBr₄(PEA为苯乙胺, y 为 Pb²⁺占 Mn²⁺和 Pb²⁺总含量的物质的量分数)薄膜。宽带隙的(PEA)₂PbBr₄作为给体, 掺杂杂质 Mn²⁺作为受体, 构筑了双发射的激发态传递系统。通过调控 Mn²⁺掺杂的不同比例对(PEA)₂Pb_yMn_1-yBr₄的发光性能和薄膜形貌的影响, 发现当前驱体溶液中 Mn²⁺与 Pb²⁺的物质的量之比为 1:4 时, 薄膜有着最高的 PLQY 和最低的表面粗糙度。利用飞秒瞬态吸收(transientabsorption, TA)光谱, 追踪其动力学过程, 发现主客体之间的激发态传递是通过电荷转移来实现的。为了研究材料的电致发光特性, 我们将(PEA)₂Pb_yMn_1-yBr₄作为活性层, 加工得到了发光二极管(light emitting diodes, LEDs)。在室温下, 器件发出明亮的橙色, 其最高的发光强度为 0.21 cd·m^-2, 外量子效率(external quantum efficiency, EQE)为 0.002 5 %。     

Three‐Dimensional Cuprous Lead Bromide Framework with Highly Efficient and Stable Blue Photoluminescence Emission

Considering the instability and low photoluminescence quantum yield (PLQY) of blue‐emitting perovskites, it is still challenging and attractive to construct single crystalline hybrid lead halides with highly stable and efficient blue light emission. Herein, by rationally introducing d¹⁰ transition metal into single lead halide as new structural building unit and optical emitting center, we prepared a bimetallic halide of [(NH₄)₂]CuPbBr₅ with new type of three‐dimensional (3D) anionic framework. [(NH₄)₂]CuPbBr₅ exhibits strong band‐edge blue emission (441 nm) with a high PLQY of 32 % upon excitation with UV light. Detailed photophysical studies indicate [(NH₄)₂]CuPbBr₅ also displays broadband red light emissions derived from self‐trapped states. Furthermore, the 3D framework features high structural and optical stabilities at extreme environments during at least three years. To our best knowledge, this work represents the first 3D non‐perovskite bimetallic halide with highly efficient and stable blue light emission.     

Achieving Color-Tunable Long Persistent Luminescence in Cs2CdCl4 Ruddlesden-Popper Phase Perovskites

Two-dimensional (2D)-halide perovskites have been enriched over recent years to offer remarkable features from diverse chemical structures and environmental stability endowed with exciting functionalities in photoelectric detectors and phosphorescence systems. However, the low conversion efficiency of singlet to triplet in 2D hybrid halide perovskites reduces phosphorescence lifetimes. In this study, the long persistent luminescence of 2D all-inorganic perovskites with a self-assembled 2D interlayer galleries structure is investigated. The results show that the decay time of the long persistent luminescence increases from 450 s to 600 s, and the luminescence color changes from cyan to orange, and the thermal stability of photoluminescence enhances dramatically after replacing Cd²⁺ by appropriate Mn²⁺ ions in 2D Cs₂CdCl₄ Ruddlesden-Popper phase perovskites. Furthermore, diversified anti-counterfeiting modes are fabricated to highlight the promising applications of Cs₂CdCl₄ perovskite systems with tunable persistent luminescence in advanced anti-counterfeiting. Therefore, our studies provide a novel model for realizing tunable long persistent luminescence of perovskite with 2D self-assembled layered structure for advanced anti-counterfeiting.     

Understanding the Impact of Bismuth Heterovalent Doping on the Structural and Photophysical Properties of CH3NH3PbBr3 Halide Perovskite Crystals with Near-IR Photoluminescence

A comprehensive study unveiling the impact of heterovalent doping with Bi³⁺ on the structural, semiconductive, and photoluminescent properties of a single crystal of lead halide perovskites (CH₃NH₃PbBr₃) is presented. As indicated by single-crystal XRD, a perfect cubic structure in Bi³⁺-doped CH₃NH₃PbBr₃ crystals is maintained in association with a slight lattice contraction. Time-resolved and power-dependent photoluminescence (PL) spectroscopy illustrates a progressively quenched PL of visible emission, alongside the appearance of a new PL signal in the near-infrared (NIR) regime, which is likely to be due to energy transfer to the Bi sites. These optical characteristics indicate the role of Bi³⁺ dopants as nonradiative recombination centers, which explains the observed transition from bimolecular recombination in pristine CH₃NH₃PbBr₃ to a dominant trap-assisted monomolecular recombination with Bi³⁺ doping. Electrically, it is found that the mobility in pristine perovskite crystals can be boosted with a low Bi³⁺ concentration, which may be related to a trap-filling mechanism. Aided by temperature (T)-dependent measurements, two temperature regimes are observed in association with different activation energies (E_a) for electrical conductivity. The reduction of E_a at lower T may be ascribed to suppression of ionic conduction induced by doping. The modified electrical properties and NIR emission with the control of Bi³⁺ concentration shed light on the opportunity to apply heterovalent doping of perovskite single crystals for NIR optoelectronic applications.     

Metal Coordination Sphere Deformation Induced Highly Stokes-Shifted,Ultra Broadband Emission in 2D Hybrid Lead-Bromide Perovskites and Investigation of Its Origin

Published studies of layered (2D) (100)-oriented hybrid lead-bromide perovskites evidence a correlation between increased inter-octahedral (Pb-Br-Pb) distortions and the appearance of broadband white light emission. However, the impact of distortions within their constituent [PbBr₆]⁴⁻ octahedra has yet to be assessed. Herein, we report two new (100)-oriented 2D Pb-Br perovskites, whose structures display unusually high intra-octahedral distortions, whilst retaining minimal inter-octahedral distortions. Using a combination of temperature-dependent, power-dependent and time-resolved photoluminescence spectroscopic measurements, we show that increased intra-octahedral distortion induces exciton localization processes and leads to formation of multiple photoinduced emissive colour centres. Ultimately, this leads to highly Stokes-shifted, ultrabroad white light emission at room temperature.     

Mn2+掺杂准二维钙钛矿(PEA)2PbyMn1-yBr4的制备及其电致发光性能

制备了具有高荧光量子产率(photoluminescence quantum yield,PLQY)的Mn²⁺掺杂准二维钙钛矿(PEA)₂Pb_yMn_1-yBr₄(PEA为苯乙胺,y为Pb²⁺占Mn²⁺和Pb²⁺总含量的物质的量分数)薄膜。宽带隙的(PEA)₂PbBr₄作为给体,掺杂杂质Mn²⁺作为受体,构筑了双发射的激发态传递系统。通过调控Mn²⁺掺杂的不同比例对(PEA)₂Pb_yMn_1-yBr₄的发光性能和薄膜形貌的影响,发现当前驱体溶液中Mn²⁺与Pb²⁺的物质的量之比为1∶4时,薄膜有着最高的PLQY和最低的表面粗糙度。利用飞秒瞬态吸收(transient absorption,TA)光谱,追踪其动力学过程,发现主客体之间的激发态传递是通过电荷转移来实现的。为了研究材料的电致发光特性,我们将(PEA)₂Pb_yMn_1-yBr₄作为活性层,加工得到了发光二极管(light emitting diodes,LEDs)。在室温下,器件发出明亮的橙色,其最高的发光强度为0.21 cd·m^-2,外量子效率(external quantum efficiency,EQE)为0.002 5%。     

Self‐Template‐Directed Synthesis of Porous Perovskite Nanowires at Room Temperature for High‐Performance Visible‐Light Photodetectors

The unique optoelectronic properties and promising photovoltaic applications of organolead halide perovskites have driven the exploration of facile strategies to synthesize organometal halide perovskites and corresponding hybrid materials and devices. Currently, the preparation of CH₃NH₃PbBr₃ perovskite nanowires, especially those with porous features, is still a great challenge. An efficient self‐template‐directed synthesis of high‐quality porous CH₃NH₃PbBr₃ perovskite nanowires in solution at room temperature using the Pb‐containing precursor nanowires as both the sacrificial template and the Pb²⁺ source in the presence of CH₃NH₃Br and HBr is now presented. The initial formation of CH₃NH₃PbBr₃ perovskite layers on the surface of the precursor nanowires and the following dissolution of the organic component of the latter led to the formation of mesopores and the preservation of the 1D morphology. Furthermore, the perovskite nanowires are potential materials for visible‐light photodetectors with high sensitivity and stability.     

Metal Coordination Sphere Deformation Induced Highly Stokes‐Shifted,Ultra Broadband Emission in 2D Hybrid Lead‐Bromide Perovskites and Investigation of Its Origin

Published studies of layered (2D) (100)‐oriented hybrid lead‐bromide perovskites evidence a correlation between increased inter‐octahedral (Pb‐Br‐Pb) distortions and the appearance of broadband white light emission. However, the impact of distortions within their constituent [PbBr₆]^4? octahedra has yet to be assessed. Herein, we report two new (100)‐oriented 2D Pb‐Br perovskites, whose structures display unusually high intra‐octahedral distortions, whilst retaining minimal inter‐octahedral distortions. Using a combination of temperature‐dependent, power‐dependent and time‐resolved photoluminescence spectroscopic measurements, we show that increased intra‐octahedral distortion induces exciton localization processes and leads to formation of multiple photoinduced emissive colour centres. Ultimately, this leads to highly Stokes‐shifted, ultrabroad white light emission at room temperature.     

Large Magnetization and Frustration Switching of Magnetoresistance in the Double‐Perovskite Ferrimagnet Mn2FeReO6

Ferrimagnetic A₂BB′O₆ double perovskites, such as Sr₂FeMoO₆, are important spin‐polarized conductors. Introducing transition metals at the A‐sites offers new possibilities to increase magnetization and tune magnetoresistance. Herein we report a ferrimagnetic double perovskite, Mn₂FeReO₆, synthesized at high pressure which has a high Curie temperature of 520 K and magnetizations of up to 5.0 μ_B which greatly exceed those for other double perovskite ferrimagnets. A novel switching transition is discovered at 75 K where magnetoresistance changes from conventional negative tunneling behavior to large positive values, up to 265 % at 7 T and 20 K. Neutron diffraction shows that the switch is driven by magnetic frustration from antiferromagnetic Mn²⁺ spin ordering which cants Fe³⁺ and Re⁵⁺ spins and reduces spin‐polarization. Ferrimagnetic double perovskites based on A‐site Mn²⁺ thus offer new opportunities to enhance magnetization and control magnetoresistance in spintronic materials.     

Suppression of charge imbalance via Li+-Mn4+ co-incorporated Sr2YSbO6 red phosphors for warm w-LEDs

Mn⁴⁺-activated double perovskite phosphors with composition diversity have presented excellent luminescent performances. However, the charge imbalance between Mn⁴⁺ and matrix cations would increase non-radiative recombination and reduce the structural stability. Here, novel high-efficiency stable Li⁺/Mn⁴⁺ co-incorporated Sr₂YSbO₆ red phosphors are successfully synthesized via a solid-state reaction method for warm w-LEDs, where the Li⁺ ions have the effect of charge balance for Sr₂YSbO₆:Mn⁴⁺ and reduce the non-radiative energy transfer among Mn⁴⁺ ions. It is demonstrated that the substitution of Li⁺–Mn⁴⁺ pairs for Sb⁵⁺ can enhance the bonding with low-shifted diffraction peaks and high emission intensity, and prolong the decay lifetime, compared with those of Mn⁴⁺ single-doped ones. Impressively, the thermal stability is enhanced to 89.72% from 84.61% at the original value of 303 K. Finally, a w-LED device based on the optimal phosphor Sr₂YSbO₆:0.01Mn⁴⁺/0.01Li⁺ red component exhibits a correlated color temperature of 4487 K and color rendering index of 80.2. Therefore, the incorporated Li⁺ ions serve as both charge compensator and co-activator in Mn⁴⁺-activated double perovskite phosphors with the aim of high luminescent performance and thermal stability.     

Zero‐Dimensional Hybrid Cd‐Based Perovskites with Broadband Bluish White‐Light Emissions

Recently, low‐dimensional organic‐inorganic hybrid metal halide perovskites acting as single‐component white‐light emitting materials have attracted extensive attention, but most studies concentrate on hybrid lead perovskites. Herein, we present two isomorphic zero‐dimensional (0D) hybrid cadmium perovskites, (HMEDA)CdX₄ (HMEDA=hexamethylenediamine, X=Cl ( 1 ), Br ( 2 )), which contain isolated [CdX₄]^2? anions separated by [HMEDA]²⁺ cations. Under UV light excitation, both compounds display broadband bluish white‐light emission (515 nm for 1 and 445 nm for 2 ) covering the entire visible light spectrum with sufficient photophysical stabilities. Remarkably, compound 2 shows a high color rendering index (CRI) of 83 enabling it as a promising candidate for single‐component WLED applications. Based on the temperature‐dependent, powder‐dependent and time‐resolved PL measurements as well as other detailed studies, the broadband light emissions are attributed to self‐trapped excitons stemming from the strong electron‐phonon coupling.     

Double Double Cation Order in the High‐Pressure Perovskites MnRMnSbO6

Cation ordering in ABO₃ perovskites adds to their chemical variety and can lead to properties such as ferrimagnetism and magnetoresistance in Sr₂FeMoO₆. Through high‐pressure and high‐temperature synthesis, a new type of “double double perovskite” structure has been discovered in the family MnRMnSbO₆ (R=La, Pr, Nd, Sm). This tetragonal structure has a 1:1 order of cations on both A and B sites, with A‐site Mn²⁺ and R³⁺ cations ordered in columns and Mn²⁺ and Sb⁵⁺ having rock salt order on the B sites. The MnRMnSbO₆ double double perovskites are ferrimagnetic at low temperatures with additional spin‐reorientation transitions. The ordering direction of ferrimagnetic Mn spins in MnNdMnSbO₆ changes from parallel to [001] below T_C=76 K to perpendicular below the reorientation transition at 42 K at which Nd moments also order. Smaller rare earths lead to conventional monoclinic double perovskites (MnR)MnSbO₆ for Eu and Gd.     

Tailoring Component Interaction for Air-Processed Efficient and Stable All-Inorganic Perovskite Photovoltaic

All-inorganic lead halide perovskites are promising candidates for optoelectronic applications. However, fundamental questions remain over the component interaction in the perovskite precursor solution due to the limitation of the most commonly used solvents of N,N-dimethylformamide (DMF) and dimethyl sulfoxide (DMSO). Here, we report an interaction tailoring strategy for all-inorganic CsPbI_3−xBr_x perovskites by involving the ionic liquid solvent methylammonium acetate (MAAc). C=O shows strong interaction with lead (Pb²⁺) and N−H⋅⋅⋅I hydrogen bond formation is observed. The interactions stabilize the perovskite precursor solution and allow production of the high-quality perovskite films by retarding the crystallization. Without the necessity for antisolvent treatment, the one-step air-processing approach delivers photovoltaic cells regardless of humidity, with a high efficiency of 17.10 % along with long operation stability over 1500 h under continuous light illumination.     

A Ternary Solvent Method for Large‐Sized Two‐Dimensional Perovskites

Recent reports demonstrate that a two‐dimensional (2D) structural characteristic can endow perovskites with both remarkable photoelectric conversion efficiency and high stability, but the synthesis of ultrathin 2D perovskites with large sizes by facile solution methods is still a challenge. Reported herein is the controlled growth of 2D (C₄H₉NH₃)₂PbBr₄ perovskites by a chlorobenzene‐dimethylformide‐acetonitrile ternary solvent method. The critical factors, including solvent volume ratio, crystallization temperature, and solvent polarity on the growth dynamics were systematically studied. Under optimum reaction condition, 2D (C₄H₉NH₃)₂PbBr₄ perovskites, with the largest lateral dimension of up to 40 μm and smallest thickness down to a few nanometers, were fabricated. Furthermore, various iodine doped 2D (C₄H₉NH₃)₂PbBr_x I_4−x perovskites were accessed to tune the optical properties rationally.     

Steric Mixed‐Cation 2D Perovskite as a Methylammonium Locker to Stabilize MAPbI3

The reduced dimension perovskite including 2D perovskites are one of the most promising strategies to stabilize lead halide perovskite. A mixed‐cation 2D perovskite based on a steric phenyltrimethylammonium (PTA) cation is presented. The PTA‐MA mixed‐cation 2D perovskite of PTAMAPbI₄ can be formed on the surface of MAPbI₃ (PTAI‐MAPbI₃) by controllable PTAI intercalation by either spin coating or soaking. The PTAMAPbI₄ capping layer can not only passivate PTAI‐MAPbI₃ perovskite but also act as MA⁺ locker to inhibit MAI extraction and significantly enhance the stability. The highly stable PTAI‐MAPbI₃ based perovskite solar cells exhibit a reproducible photovoltaic performance with a champion PCE of 21.16 %. Such unencapsulated devices retain 93 % of initial efficiency after 500 h continuous illumination. This steric mixed‐cation 2D perovskite as MA⁺ locker to stabilize the MAPbI₃ is a promising strategy to design stable and high‐performance hybrid lead halide perovskites.     

Tailoring Component Interaction for Air‐Processed Efficient and Stable All‐Inorganic Perovskite Photovoltaic

All‐inorganic lead halide perovskites are promising candidates for optoelectronic applications. However, fundamental questions remain over the component interaction in the perovskite precursor solution due to the limitation of the most commonly used solvents of N,N‐dimethylformamide (DMF) and dimethyl sulfoxide (DMSO). Here, we report an interaction tailoring strategy for all‐inorganic CsPbI_3?xBr_x perovskites by involving the ionic liquid solvent methylammonium acetate (MAAc). C=O shows strong interaction with lead (Pb²⁺) and N?H???I hydrogen bond formation is observed. The interactions stabilize the perovskite precursor solution and allow production of the high‐quality perovskite films by retarding the crystallization. Without the necessity for antisolvent treatment, the one‐step air‐processing approach delivers photovoltaic cells regardless of humidity, with a high efficiency of 17.10 % along with long operation stability over 1500 h under continuous light illumination.     

Stabilizing RbPbBr3 Perovskite Nanocrystals through Cs+ Substitution

ABX₃-type halide perovskite nanocrystals (NCs) have been a hot topic recently due to their fascinating optoelectronic properties. It has been demonstrated that A-site ions have an impact on their photophysical and chemical properties, such as the optical band gap and chemical stability. The pursuit of halide perovskite materials with diverse A-site species would deepen the understanding of the structure–property relationship of the perovskite family. In this work we have attempted to synthesize rubidium-based perovskite NCs. We have discovered that the partial substitution of Rb⁺ by Cs⁺ help to stabilize the orthorhombic RbPbBr₃ NCs at low temperature, which otherwise can only be obtained at high temperature. The inclusion of Cs⁺ into the RbPbBr₃ lattice results in highly photoluminescent Rb_1−xCs_xPbBr₃ NCs. With increasing amounts of Cs⁺, the band gaps of the Rb_1−xCs_xPbBr₃ NCs decrease, leading to a redshift of the photoluminescence peak. Also, the Rb_1−xCs_xPbBr₃ NCs (x=0.4) show good stability under ambient conditions. This work demonstrates the high structural flexibility and tunability of halide perovskite materials through an A-site cation substitution strategy and sheds light on the optimization of perovskite materials for application in high-performance optoelectronic devices.     

Tailored Engineering of an Unusual (C4H9NH3)2(CH3NH3)2Pb3Br10 Two‐Dimensional Multilayered Perovskite Ferroelectric for a High‐Performance Photodetector

Two‐dimensional (2D) layered hybrid perovskites have shown great potential in optoelectronics, owing to their unique physical attributes. However, 2D hybrid perovskite ferroelectrics remain rare. The first hybrid ferroelectric with unusual 2D multilayered perovskite framework, (C₄H₉NH₃)₂(CH₃NH₃)₂Pb₃Br₁₀ ( 1 ), has been constructed by tailored alloying of the mixed organic cations into 3D prototype of CH₃NH₃PbBr₃. Ferroelectricity is created through molecular reorientation and synergic ordering of organic moieties, which are unprecedented for the known 2D multilayered hybrid perovskites. Single‐crystal photodetectors of 1 exhibit fascinating performances, including extremely low dark currents (ca. 10⁻¹² A), large on/off current ratios (ca. 2.5×10³), and very fast response rate (ca. 150 μs). These merits are superior to integrated detectors of other 2D perovskites, and compete with the most active CH₃NH₃PbI₃.     

Three-Dimensional Cuprous Lead Bromide Framework with Highly Efficient and Stable Blue Photoluminescence Emission

Considering the instability and low photoluminescence quantum yield (PLQY) of blue-emitting perovskites, it is still challenging and attractive to construct single crystalline hybrid lead halides with highly stable and efficient blue light emission. Herein, by rationally introducing d¹⁰ transition metal into single lead halide as new structural building unit and optical emitting center, we prepared a bimetallic halide of [(NH₄)₂]CuPbBr₅ with new type of three-dimensional (3D) anionic framework. [(NH₄)₂]CuPbBr₅ exhibits strong band-edge blue emission (441 nm) with a high PLQY of 32 % upon excitation with UV light. Detailed photophysical studies indicate [(NH₄)₂]CuPbBr₅ also displays broadband red light emissions derived from self-trapped states. Furthermore, the 3D framework features high structural and optical stabilities at extreme environments during at least three years. To our best knowledge, this work represents the first 3D non-perovskite bimetallic halide with highly efficient and stable blue light emission.