Solvent‐Induced Control over Breathing Behavior in Flexible Metal–Organic Frameworks for Natural‐Gas Delivery

Finding appropriate stimuli for controlling the breathing behavior of flexible metal–organic frameworks (MOFs) is highly challenging. Herein, we report the solvent‐induced changes in the particle size and stability of different breathing phases of the MIL‐53 series, a group of flexible MOFs. A water/dimethylformamide (DMF) ratio is tuned to synthesize members of the MIL‐53 series which have different behaviors. The breathing is explored by high‐pressure methane sorption tests. Increasing DMF concentration decreases MOF particle size and increases the stability of the porous phases, boosting the 5.8–65 bar sorption difference of methane, which is required for natural‐gas delivery.     

Directing the breathing behavior of pillared-layered metal-organic frameworks via a systematic library of functionalized linkers bearing flexible substituents

Flexible metal-organic frameworks (MOFs), also referred to as soft porous crystals (SPCs), show reversible structural transitions dependent on the nature and quantity of adsorbed guest molecules. In recent studies it has been reported that covalent functionalization of the organic linker can influence or even integrate framework flexibility ("breathing") in MOFs. However, rational fine-tuning of such responsive properties is very desirable but challenging as well. Here we present a powerful approach for the targeted manipulation of responsiveness and framework flexibility of an important family of pillared-layered MOFs based on the parent structure [Zn(2)(bdc)(2)(dabco)](n) (bdc = 1,4-benzenedicarboxylate; dabco = 1,4-diazabicyclo[2.2.2]octane). A library of functionalized bdc-type linkers (fu-bdc), which bear additional dangling side groups at different positions of the benzene core (alkoxy groups of varying chain length with diverse functionalities and polarity), was generated. Synthesis of the materials [Zn(2)(fu-bdc)(2)(dabco)](n) yields the respective collection of highly responsive MOFs. The parent MOF is only weakly flexible; however, the substituted frameworks of [Zn(2)(fu-bdc)(2)(dabco)](n) contract drastically upon guest removal and expand again upon adsorption of DMF (N,N-dimethylformamide), EtOH, or CO(2), etc., while N(2) is hardly adsorbed and does not open the narrow-pored form. These "breathing" dynamics are attributed to the dangling side chains that act as immobilized "guests", which interact with mobile guest molecules as well as with themselves and with the framework backbone. The structural details of the guest-free, contracted form and the gas sorption behavior (phase transition pressure, hysteresis loop) are highly dependent on the nature of the substituent at the linker and can therefore be adjusted using our approach. Combining our library of functionalized linkers with the concept of mixed-component MOFs (solid solutions) offers very rich additional dimensions of tailoring the structural dynamics and responsiveness. Implementation of two differently functionalized linkers in varying ratios yields multicomponent single-phased [Zn(2)(fu-bdc')(2x)(fu-bdc″)(2-2x)(dabco)](n) MOFs (0 < x < 1) of increased inherent complexity, which feature a non-linear dependence of their gas sorption properties on the applied ratio of components. Hence, the responsive behavior of such pillared-layered MOFs can be extensively tuned via an intelligent combination of functionalized linkers.     

Flexible Zirconium MOFs as Bromine‐Nanocontainers for Bromination Reactions under Ambient Conditions

A series of flexible MOFs (PCN‐605, PCN‐606, and PCN‐700) are synthesized and applied to reversible bromine encapsulation and release. The chemical stability of these Zr‐MOFs ensures the framework's integrity during the bromine adsorption, while the framework's flexibility allows for structural adaptation upon bromine uptake to afford stronger host–guest interactions and therefore higher bromine adsorption capacities. The flexible MOFs act as bromine‐nanocontainers which elongate the storage time of volatile halides under ambient conditions. Furthermore, the bromine pre‐adsorbed flexible MOFs can be used as generic bromine sources for bromination reactions giving improved yields and selectivities under ambient conditions when compared with liquid bromine.     

Construction of Flexible‐on‐Rigid Hybrid‐Phase Metal–Organic Frameworks for Controllable Multi‐Drug Delivery

Multi‐component MOFs contain multiple sets of unique and hierarchical pores, with different functions for different applications, distributed in their inter‐linked domains. Herein, we report the construction of a class of precisely aligned flexible‐on‐rigid hybrid‐phase MOFs with a unique rods‐on‐octahedron morphology. We demonstrated that hybrid‐phase MOFs can be constructed based on two prerequisites: the partially matched topology at the interface of the two frameworks, and the structural flexibility of MOFs with acs topology, which can compensate for the differences in lattice parameters. Furthermore, we achieved domain selective loading of multiple guest molecules into the hybrid‐phase MOF, as observed by scanning transmission electron microscopy–energy‐dispersive X‐ray spectrometry elemental mapping. Most importantly, we successfully applied the constructed hybrid‐phase MOF to develop a dual‐drug delivery system with controllable loading ratio and release kinetics.     

Turn-on fluorescence in tetraphenylethylene-based metal-organic frameworks: an alternative to aggregation-induced emission

Coordinative immobilization of functionalized tetraphenylethylene within rigid porous metal-organic frameworks (MOFs) turns on fluorescence in the typically non-emissive tetraphenylethylene core. The matrix coordination-induced emission effect (MCIE) is complementary to aggregation-induced emission. Despite the large interchromophore distances imposed by coordination to metal ions, a carboxylate analogue of tetraphenylethylene anchored by Zn(2+) and Cd(2+) ions inside MOFs shows fluorescence lifetimes in line with those of close-packed molecular aggregates. Turn-on fluorescence by coordinative ligation in a porous matrix is a powerful approach that may lead to new materials made from chromophores with molecular rotors. The potential utility of MCIE toward building new sensing materials is demonstrated by tuning the fluorescence response of the porous MOFs as a function of adsorbed small analytes.     

Precise Modulation of the Breathing Behavior and Pore Surface in Zr‐MOFs by Reversible Post‐Synthetic Variable‐Spacer Installation to Fine‐Tune the Expansion Magnitude and Sorption Properties

To combine flexibility and modifiability towards a more controllable complexity of MOFs, a post‐synthetic variable‐spacer installation (PVSI) strategy is used to implement kinetic installation/ uninstallation of secondary ligands into/from a robust yet flexible proto‐Zr‐MOF. This PVSI process features precise positioning of spacers with different length, size, number, and functionality, enabling accurate fixation of successive breathing stages and fine‐tuning of pore surface. It shows unprecedented synthetic tailorability to create complicated MOFs in a predictable way for property modification, for example, CO₂ and R22 adsorption/separation, thermal/chemical stability, and extended breathing behavior.     

Gradually Tuning the Flexibility of Two-Dimensional Covalent Organic Frameworks via Stepwise Structural Transformation and Their Flexibility-Dependent Properties

Flexible covalent organic frameworks (COFs) are intriguing for their dynamic properties distinctive from rigid counterparts but still suffer from limited accessibility. Especially, controlling flexibility of COFs is challenging and the impact of different flexibility on properties of COFs has rarely been unveiled. This article reports stepwise adjustment on flexibility of two-dimensional COFs, which is realized by the designed synthesis of rigid COF (R-COF), semi-flexible COF (SF-COF), and flexible COF (F-COF) through polymerization, linker exchange, and linkage conversion with a newly developed method for reduction of hydrazone, respectively. Significant difference in breathing behavior and self-adaptive capability of the three COFs are uncovered through vapor response and iodine capture experiments. Gas sorption experiments indicate that the porosity of F-COF could switch from “close” state in nitrogen to “open” state in carbon dioxide, which are not observed for R-COF and SF-COF. This study not only develops a strategy to adjust the flexibility of COFs by tuning their linkers and linkages, but also provides a deep insight into the impact of different flexibility on properties of COFs, which lays a foundation for the development of this new class of dynamic porous materials.     

polyMOFs: A Class of Interconvertible Polymer‐Metal‐Organic‐Framework Hybrid Materials

Preparation of porous materials from one‐dimensional polymers is challenging because the packing of polymer chains results in a dense, non‐porous arrangement. Herein, we demonstrate the remarkable adaptation of an amorphous, linear, non‐porous, flexible organic polymer into a three‐dimensional, highly porous, crystalline solid, as the organic component of a metal–organic framework (MOF). A polymer with aromatic dicarboxylic acids in the backbone functioned as a polymer ligand upon annealing with Zn^II, generating a polymer–metal–organic framework (polyMOF). These materials break the dogma that MOFs must be prepared from small, rigid ligands. Similarly, polyMOFs contradict conventional polymer chemistry by demonstrating that linear and amorphous polymers can be readily coaxed into a highly crystalline, porous, three‐dimensional structure by coordination chemistry.     

金属有机框架色谱固定相的研究进展

金属有机框架(MOFs)是由金属离子或金属簇与有机配体通过配位作用自组装形成的一类新型多孔材料. MOFs具有独特的拓扑结构、丰富的孔隙结构、可调的孔道尺寸、巨大的比表面积以及灵活的表面修饰等特征,是色谱分离领域颇受关注的一类新型固定相. 综述了近几年MOFs材料作为固定相在气相色谱、液相色谱及手性拆分等领域应用的研究进展,展现MOFs材料在色谱分离领域的优异性能和应用潜力,并对MOFs材料在色谱固定相领域今后的发展进行了展望.     

金属-有机框架材料在液相催化化学制氢中的研究进展

金属-有机框架(MOFs)材料是由金属簇节点或金属离子与有机配体连接而成的典型的无机-有机杂合物, 作为一类新兴的无机多孔晶态材料, MOFs因具有高度有序的多孔性、 结构可裁剪性、 高比表面积及灵活多变的骨架类型等优点而在工业合成、 能源开发、 环境治理和生物制药等领域展现出广阔的应用前景. 本文从氢能源的开发利用出发, 总结了近年来MOFs基纳米复合材料在催化化学制氢方面的研究进展. 讨论了常见的含氢量高的化学储氢材料, 包括氨硼烷、 甲酸和水合肼等; 催化材料主要有单一MOFs、 MOF基贵金属和非贵金属复合材料及MOF基衍生材料等. 最后, 对MOF基复合材料在液相催化化学储氢中的应用前景进行了展望.     

Modeling the effect of structural changes during dynamic separation processes on MOFs

A model able to describe the effect of structural changes in the adsorbent or adsorbed phase during the dynamic (breakthrough) separation of mixtures on metal-organic frameworks (MOFs) is presented. The methodology is exemplified for a few pertinent case studies: the separation of xylene isomers and ethylbenzene on the flexible MOF MIL-53 and the rigid MOF MIL-47. At low pressures, no preferential adsorption of any component occurs on both MOFs. Contrarily, at higher pressures separation of ethylbenzene (EB) from o-xylene (oX) occurs on MIL-53 as a result of the breathing phenomenon within the MIL-53 structure. The increase in selectivity, starting from the gate-opening pressure, could be modeled by using a pressure-dependent saturation capacity for the most strongly adsorbed component oX. In the separation of m-xylene (mX) from p-xylene (pX) on the rigid MOF MIL-47, separation at higher pressures is a result of preferential stacking of pX. Here, the selectivity increases once the adsorption of pX switches from a single to a double file adsorption. By implementing a loading dependent adsorption constant for pX, the different unconventional breakthrough profiles and the observed selectivity profile on MIL-47 can be simulated. A similar methodology was used for the separation of EB from pX on MIL-47, where the separation is a result from steric constraints imposed onto the adsorption of EB.     

Porous Frameworks Based on Supramolecular Ball Joints: Bringing Flexibility to Ordered 3D Lattices

XOFs-type materials (X=M, C, S, that is, metal–organic frameworks, covalent organic frameworks and supramolecular organic frameworks, respectively) share a common unifying feature: mutual spatial orientation of constituting components is strictly directional and unchanging by design. Herein, we illustrate an alternate design for porous architectures, as rigid joints constituted by coordinative (MOFs), covalent (COFs), or hydrogen-donor/acceptor (SOFs) bonds, are replaced by supramolecular ball joints, which confer unprecedented flexibility, especially angular, to porous networks. The obtained frameworks remain highly organized but are also permutable: lacking a forced convergence towards an immutable minimum energy structure, these systems remain able to adjust depending on external conditions. Results of POF (permutable organized framework) synthesis is a family of structures rather than a single pre-determined three-dimensional arrangement, as we demonstrate with an illustrative set of 5 XRD structures.     

Ionic Liquids Supported on Metal‐Organic Frameworks: Remarkable Adsorbents for Adsorptive Desulfurization

Acidic ionic‐liquids (IL) supported on metal–organic frameworks (MOFs) have been shown to be beneficial for adsorptive desulfurization. A remarkable improvement in the adsorption capacity (ca. 71%) was observed in for ILs supported on MIL‐101 compared with virgin MIL‐101. The improved adsorptive performance might be explained by the acid–base interactions between the acidic ionic liquid and basic benzothiophene (BT). Moreover, from this study, it can be suggested that porous MOFs, supported with ionic liquids, may introduce a new class of highly porous adsorbents for the efficient adsorption of various compounds.     

Microporous Metal–Organic Frameworks for Gas Separation

Microporous metal–organic frameworks (MOFs) are comparatively new porous materials. Because the pores within such MOFs can be readily tuned through the interplay of both metal‐containing clusters and organic linkers to induce their size‐selective sieving effects, while the pore surfaces can be straightforwardly functionalized to enforce their different interactions with gas molecules, MOF materials are very promising for gas separation. Furthermore, the high porosities of such materials can enable microporous MOFs with optimized gas separation selectivity and capacity to be targeted. This Focus Review highlights recent significant advances in microporous MOFs for gas separation.     

Optimization of Reaction Conditions towards Multiple Types of Framework Isomers and Periodic‐Increased Porosity: Luminescence Properties and Selective CO2 Adsorption over N2

Three new metal‐organic frameworks (MOFs) were prepared by solvo(hydro)thermolysis and further characterized as framework isomers. The structural transformation from non‐porous to porous MOFs and the purity of these products can be modulated by controlling the reaction temperature. The periodic‐increased porosity observed was further confirmed by CO₂ adsorption isotherms. Owing to the presence of acylamide groups in the pore walls and the flexible nature of the skeleton of these MOFs, highly selective CO₂ adsorption over N₂ was observed, as well as structure‐dependent periodic varieties in luminescence properties.     

Pseudo-Gated Adsorption with Negligible Volume Change Evoked by Halogen-Bond Interaction in the Nanospace of MOFs

The enhancement of gas adsorption utilizing weak interactions in porous compounds is highly demanding for the design of energy-efficient storage materials. Here, we present a rational design for such an adsorption process by using synergistic functions between dynamic motion in a local module and weak but specific host–guest interactions, that is, halogen-bond (XB) interactions in metal–organic frameworks (MOFs). We designed a new porous coordination polymer (PCP), that is, Br-PCP, the pore surfaces of which are decorated with −CH₂Br groups and could be useful for interaction with CO₂ molecules. In accordance with our anticipation, in-situ studies suggest that the adsorption step at approximately 54 kPa during CO₂ adsorption is indeed facilitated by XB interactions with little change in the structural volume. This approach of integrating flexible XB modules in rigid PCPs is applicable for designing advanced gas storage systems.     

Intercalation of Varied Sulfonates into a Layered MOC: Confinement‐Caused Tunable Luminescence and Novel Properties

The pores/channels of porous 3D metal–organic frameworks (MOFs) have been widely applied to incorporate gas, solvent, or organic molecules. On the contrary, the utilization of the interlamellar void of layered metal–organic complexes (MOCs) remains underappreciated, although it is more flexible and available to accommodate molecules with different sizes. In this work, diverse sulfonates have been intercalated purposely into an identical layered MOC, which constructed various novel intercalation compounds possessing fluorescent, white‐light emitting, photochromic, homochiral, or nonlinear optical (NLO) properties. With the help of single‐crystal X‐ray diffraction, their structures and the mutual interactions between the MOC host and the sulfonate guests were characterized. The properties of the guest molecules were tuned and meanwhile some new performances were generated after confining them into the interlayer region. Such a hybrid approach provides an efficient strategy to design and prepare multifunctional materials.     

Flexibility in metal-organic framework materials: Impact on sorption properties

Recent years have seen the development of a new class of porous coordination polymers known collectively as metal organic framework materials (MOFs). This review outlines recent progress in understanding how adsorption characteristics of these systems differ from rigid classical sorbents such as activated carbon and zeolites. Gas/vapor adsorption studies for characterization of the porous structures of MOF materials are reviewed and differences in adsorption characteristics based on detailed measurement of equilibrium and dynamical sorption behavior, compared with previous generations of sorbents, are highlighted. The role of framework flexibility and specific structural features, such as windows and pore cavities, within the MOF porous structures are discussed in relation to adsorption mechanisms.     

金属有机骨架复合材料在样品预处理中的研究进展

金属有机骨架（MOFs）材料是近几年涌现出的一类新型多功能多孔材料,以金属离子或金属簇为配位中心,与含氧或氮的有机配体通过配位作用形成多孔骨架结构。相比于其他传统无机多孔材料,MOFs具有比表面积高、孔隙率大、热稳定性好和结构与功能多样化的特点,因而被广泛用于气体存储、催化、吸附和分离等领域。MOFs复合材料在样品预处理方面的应用引起了研究者们的极大兴趣和广泛关注。由于MOFs材料和不同功能材料如高分子聚合物、碳基材料以及磁性材料组装复合,使MOFs复合材料的性能优于原来的MOFs材料。综述了近年MOFs复合材料在样品预处理的研究应用,尤其是在固相微萃取、固相萃取以及磁性固相萃取等方面的应用。     

Crystal Dynamics in Multi‐stimuli‐Responsive Entangled Metal–Organic Frameworks

An understanding of solid‐state crystal dynamics or flexibility in metal–organic frameworks (MOFs) showing multiple structural changes is highly demanding for the design of materials with potential applications in sensing and recognition. However, entangled MOFs showing such flexible behavior pose a great challenge in terms of extracting information on their dynamics because of their poor single‐crystallinity. In this article, detailed experimental studies on a twofold entangled MOF ( f‐MOF‐1) are reported, which unveil its structural response toward external stimuli such as temperature, pressure, and guest molecules. The crystallographic study shows multiple structural changes in f‐MOF‐1 , by which the 3 D net deforms and slides upon guest removal. Two distinct desolvated phases, that is, f‐MOF‐1 a and f‐MOF‐1 b , could be isolated; the former is a metastable one and transformable to the latter phase upon heating. The two phases show different gated CO₂ adsorption profiles. DFT‐based calculations provide an insight into the selective and gated adsorption behavior with CO₂ of f‐MOF‐1 b . The gate‐opening threshold pressure of CO₂ adsorption can be tuned strategically by changing the chemical functionality of the linker from ethanylene (?CH₂?CH₂?) in f‐MOF‐1 to an azo (?N=N?) functionality in an analogous MOF, f‐MOF‐2 . The modulation of functionality has an indirect influence on the gate‐opening pressure owing to the difference in inter‐net interaction. The framework of f‐MOF‐1 is highly responsive toward CO₂ gas molecules, and these results are supported by DFT calculations.