Hierarchical Nanotubes Constructed by Co9S8/MoS2 Ultrathin Nanosheets Wrapped with Reduced Graphene Oxide for Advanced Lithium Storage

Nanostructured hybrid metal sulfides have attracted intensive attention due to their fascinating properties that are unattainable by the single‐phased counterpart. Herein, we report an efficient approach to construct cobalt sulfide/molybdenum disulfide (Co₉S₈/MoS₂) wrapped with reduced graphene oxide (rGO). The unique structures constructed by ultrathin nanosheets and synergetic effects benefitting from bimetallic sulfides provide improved lithium ions reaction kinetics, and they retain good structural integrity. Interestingly, the conductive rGO can facilitate electron transfer, increase the electronic conductivity and accommodate the strain during cycling. When evaluated as anode materials for lithium‐ion batteries (LIBs), the resultant reduced graphene oxide‐coated cobalt sulfide/molybdenum disulfide (Co₉S₈/MoS₂@rGO) nanotubes deliver high specific capacities of 1140, 948, 897, 852, 820, 798 and 784 mAh g^?1 at the various discharging current densities of 0.2, 0.5, 1, 2, 3, 4 and 5 A g^?1, respectively. In addition, they can maintain an excellent cycle stability with a discharge capacity of 807 mAh g^?1 at 0.2 A g^?1 after 70 cycles, 787 mAh g^?1 at 1 A g^?1 after 180 cycles and 541 mAh g^?1 at 2 A g^?1 after 200 cycles. The proposed method may offer fundamental understanding for the rational design of other hybrid functional composites with high Li‐storage properties.     

氧化石墨烯水热还原前后的发光光谱

分别采用改进Hummers方法和水热还原法制备了氧化石墨烯(GO)和还原氧化石墨烯(RGO)。 GO和RGO经透射电子显微镜(TEM)、紫外-可见吸收光谱(UV-Vis)、红外光谱(IR)、荧光发射和激发光谱(PL、PLE)等技术手段进行了表征。 荧光发射光谱显示,氧化石墨烯(GO)在可见光的激发下可以得到波长在600~800 nm范围内的宽谱近红外荧光。 通过比较氧化石墨烯水热还原前后的光谱变化,发现氧化石墨烯近红外荧光起源于氧化石墨烯的表面含氧基团,如C=O、COOH。 近红外荧光穿透性好、对生物组织损坏小,非常适合于生物成像,预示着氧化石墨烯在生物成像方面的应用潜力。     

MoO3纳米带/RGO复合材料的制备及其电化学性能研究

以水杨酸为模板剂和还原剂,采用水热法制备得到了一种MoO₃纳米带/RGO复合材料。利用XRD、SEM、TEM、拉曼光谱、恒流充放电、交流阻抗等手段对样品的结构、形貌以及电化学性能进行表征。测试结果表明,MoO₃纳米带/RGO复合材料作为锂离子电池负极材料,在50mA·g^-1的电流密度下可逆比容量为1000mAh·g^-1,循环50次后比容量还保持在950mAh·g^-1,相比于MoO₃纳米带其容量保持能力和循环性能得到了显著改善。     

MoO_3纳米带/RGO复合材料的制备及其电化学性能研究

以水杨酸为模板剂和还原剂,采用水热法制备得到了一种MoO3纳米带/RGO复合材料。利用XRD、SEM、TEM、拉曼光谱、恒流充放电、交流阻抗等手段对样品的结构、形貌以及电化学性能进行表征。测试结果表明,MoO3纳米带/RGO复合材料作为锂离子电池负极材料,在50 m A·g-1的电流密度下可逆比容量为1 000 m Ah·g-1,循环50次后比容量还保持在950 m Ah·g-1,相比于MoO3纳米带其容量保持能力和循环性能得到了显著改善。     

三维多孔还原氧化石墨烯气凝胶的制备及其在锂离子电池中的应用

以天然鳞片石墨为原料,采用改良的Hummers方法,制备了高纯度的薄层或单层氧化石墨(GO);并以抗坏血酸为还原剂,通过自组装还原的方式成功制备了具有三维多孔独巨石结构的还原氧化石墨烯(rGO)气凝胶,其形貌和结构经FT-IR, SEM, TEM, XRD和XPS表征。并对其作为锂离子电池负极材料的电化学性能进行了测试。结果表明：rGO气凝胶独特的形貌和结构提高了其比容量和循环性能,在100 mA·g^-1电流密度下首周放电比容量可达1 700 mAh·g^-1,首周充电比容量达710 mAh·g^-1,经过100周循环后放电比容量仍可保持在450 mAh·g^-1,库伦效率保持在98%。     

具有高效电化学储能的中空网状笼还原氧化石墨烯

通过ZnO模板辅助电沉积法制备了中空网状笼还原氧化石墨烯,具有纳米管、多孔结构、网状结构和3D微米中空笼等多层次架构. 这样的结构能够同时促进电化学活性物种的传输,提高电极材料的利用率,以及提升超级电容器性能. 该类中空网状笼还原氧化石墨烯做超级充电器电极材料时表现出了优良的电化学性能,研究结果显示,在1.0 A•g^-1时比电容达到393 F•g^-1. 而且当电流密度从1.0 A•g^-1增加到20 A•g^-1,电容仅衰减了21.2%,10000周循环后比电容损失小于1%,表明具有优异的电容稳定性.     

Electrosensing Platform for Varenicline Based on Reduced Graphene Oxide

Graphene oxide (GO) was synthesized and reduced by chemical, hydrothermal and electrochemical methods. The GO and reduced GO was characterized by XRD, FTIR, absorption, Raman, FESEM and AFM methods. Chemically reduced GO (CrGO) was observed to efficiently enhance the electron transfer kinetics of varenicline compared to hydrothermally and electrochemically reduced GO. Hence, CrGO was used for the fabrication of an electrochemical sensor for the determination of varenicline in the concentration range of 0.03–50 µM with a limit of detection of 7.03 nM. The applicability of the proposed sensor was demonstrated by analyzing the biological samples containing varenicline.     

A High-Performance Asymmetric Supercapacitor Based on Tungsten Oxide Nanoplates and Highly Reduced Graphene Oxide Electrodes

Tungsten oxide/graphene hybrid materials are attractive semiconductors for energy-related applications. Herein, we report an asymmetric supercapacitor (ASC, HRG//m-WO₃ ASC), fabricated from monoclinic tungsten oxide (m-WO₃) nanoplates as a negative electrode and highly reduced graphene oxide (HRG) as a positive electrode material. The supercapacitor performance of the prepared electrodes was evaluated in an aqueous electrolyte (1 m H₂SO₄) using three- and two-electrode systems. The HRG//m-WO₃ ASC exhibits a maximum specific capacitance of 389 F g⁻¹ at a current density of 0.5 A g⁻¹, with an associated high energy density of 93 Wh kg⁻¹ at a power density of 500 W kg⁻¹ in a wide 1.6 V operating potential window. In addition, the HRG//m-WO₃ ASC displays long-term cycling stability, maintaining 92 % of the original specific capacitance after 5000 galvanostatic charge–discharge cycles. The m-WO₃ nanoplates were prepared hydrothermally while HRG was synthesized by a modified Hummers method.     

水热合成二硫化钨/石墨烯复合材料及其氧还原性能

以六氯化钨、硫代乙酰胺、氧化石墨烯为原料,采用一步水热法合成了二维的二硫化钨/石墨烯(WS_2/RGO)复合材料。水热合成的WS_2/RGO具有薄层的二维结构,且由于石墨烯的存在,WS_2以较少的层数形成薄片状生长在石墨烯的表面。尝试将这种非Pt类材料用于电催化氧化原反应,测试结果表明,WS_2在碱性条件下氧还原活性非常低,但是复合RGO形成WS_2/RGO复合材料后,电催化氧化原性能有了极大的提高,其起始电位为-0.17 V(vs SCE),转移电子数为3.7,极限电流密度为2.5 m A·cm-2,同时其具有较好的抗甲醇性能和循环稳定性。这是因为WS_2/RGO复合材料的二维结构具有更高的电子传输速率,同时硫化钨和石墨烯可以发挥协同催化作用。这种新型的二硫化钨/石墨烯(WS_2/RGO)复合材料作为非贵金属催化剂表现出良好的氧还原性能,在燃料电池上具有较好的应用前景。     

水热合成二硫化钨/石墨烯复合材料及其氧还原性能

以六氯化钨、硫代乙酰胺、氧化石墨烯为原料,采用一步水热法合成了二维的二硫化钨/石墨烯(WS₂/RGO)复合材料。水热合成的WS₂/RGO具有薄层的二维结构,且由于石墨烯的存在,WS₂以较少的层数形成薄片状生长在石墨烯的表面。尝试将这种非Pt类材料用于电催化氧化原反应,测试结果表明,WS₂在碱性条件下氧还原活性非常低,但是复合RGO形成WS₂/RGO复合材料后,电催化氧化原性能有了极大的提高,其起始电位为-0.17 V(vs SCE),转移电子数为3.7,极限电流密度为2.5 mA·cm^-2,同时其具有较好的抗甲醇性能和循环稳定性。这是因为WS₂/RGO复合材料的二维结构具有更高的电子传输速率,同时硫化钨和石墨烯可以发挥协同催化作用。这种新型的二硫化钨/石墨烯(WS₂/RGO)复合材料作为非贵金属催化剂表现出良好的氧还原性能,在燃料电池上具有较好的应用前景。     

基于过渡金属硫化物/还原氧化石墨烯复合物的高性能超级电容器

组装高能量密度的非对称超级电容器需要使用比电容大、 体积变化小且循环稳定性好的电极材料. 过渡金属硫化物(TMSs)与纳米碳材料的复合物是此类电极材料之一. 采用水热法合成了由Cu-Mo硫化物在微波剥离的还原氧化石墨烯表面生长的复合材料(CuS-MoS₂/MErGO). 此复合材料在电流密度为2 A/g时具有高达861.5 F/g的比电容和良好的循环稳定性. 将1.6 V的电池电压施加在由NiS/MErGO为正极, CuS-MoS₂/MErGO为负极组装成的不对称超级电容器上时, 该电容器的功率密度为1.28 kW/kg, 且能量密度保持为54.2 W·h·kg^-1. 结果表明, TMS复合材料是一种很有前途的高性能电化学储能材料, 尤其是用于非对称超级电容器的组装.     

Ni/Mn3O4/NiMn2O4@RGO空心微球负极的制备及其储钠性能

采用溶剂热法制备前驱体,后经350 °C热处理,首次合成了空心结构的NiMn₂O₄微球以及不同含量氧化石墨烯包覆的Ni/Mn₃O₄/NiMn₂O₄@RGO复合材料. 电化学性能测试表明,复合负极材料中,含25wt%还原氧化石墨烯的材料储钠性能最佳,其在50 mA·g^-1电流密度下,100次循环后放电比容量保持在187.8 mAh·g^-1,且800 mA·g^-1电流密度下的可逆容量高达149.9 mAh·g^-1,明显优于NiMn₂O₄及其他石墨烯基复合材料. 研究指出,复合材料性能的提升得益于空心微球和还原的氧化石墨烯构成的特殊结构,一方面缩短了电子/离子传输距离,缓解了体积效应,另一方面高导电网络有效增强了活性物质利用率.     

CoS2/N-Doped Hollow Spheres as an Anode Material for High-Performance Sodium-Ion Batteries

In this work, we first synthesized polyacrylic acid (PAA) spheres and then used PAA as a template to load Co(OH)₂ particles onto its surface. The product of CoS₂ nanoparticles dispersed in N-doped hollow spheres (N-HCS) was prepared through sulfurization treatment (CoS₂/S@N-HCS). During the sulfuration process, sulfur penetrates into the PAA, embedding into the graphite layer along with the carbonization process. It was found that during the charging and discharging process, the sulfur in the carbon layer will gradually dissolve out, thereby forming new ion diffusion channels in the carbon spheres and exposing more CoS₂ active sites. The CoS₂/S@N-HCS composite exhibits a specific capacity of 729.6 mAh g⁻¹ after 500 cycles at a current density of 1 A g⁻¹. The sodium-storage mechanism and reaction kinetics of the materials were further measured by in-situ electrochemical impedance spectroscopy, ex-situ X-ray diffraction, capacitance performance evaluation, and galvanostatic intermittent titration technique. The excellent cycling performance and rate capability demonstrated that the CoS₂/S@N-HCS is a potential and prospective anode material for sodium-ion batteries.     

聚吡咯/氧化石墨烯层状复合材料的制备及其在超级电容器中的应用(英文)

通过将吡咯单体在低温下与氧化石墨烯进行原位聚合,获得聚吡咯/石墨烯(Ppy/CRGO)复合材料.采用场发射电子显微镜(FESEM)、红外(FT-IR)和热重分析(TGA)对复合物的表面形貌、结构进行表征.FESEM结果表明,通过控制氧化石墨烯(GO)和吡咯单体的质量比例,可以对复合物的层状和厚度进行调控.FT-IR和TGA结果表明,聚吡咯(Ppy)是通过化学键合的方式与氧化石墨烯复合在一起.通过机械冷压法将粉末状Ppy/CRGO复合物压成圆片电极,并探讨了石墨烯和聚吡咯复合比例、反应时间、烘干温度和孔隙率等因素对Ppy/CRGO复合物电极的电学和电化学性能的影响.结果表明,Ppy与CRGO质量比为10∶1所制得的Ppy/CRGO复合物的电容量为421 F·g-1,通过在电极中引入孔隙,电容量能进一步提升为509 F·g-1.     

多级结构还原氧化石墨烯包覆的钴铁氧体的合成及电化学性能

以水滑石为前驱体合成微米花/纳米片多级结构过渡金属复合氧化物CoFe2O4,一种高性能锂离子电池负极材料。 通过X射线衍射仪(XRD)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)等技术手段对其进行结构表征,发现得到的复合氧化物为单一晶相,且具有多级结构。 电化学性能测试表明,得到的负极材料具有高比容量和倍率性能。 通过还原氧化石墨烯(rGO)对CoFe2O4进行表面包覆制备CoFe2O4/rGO,其循环稳定性得到大幅度提高。