Quantifying the Overall Efficiency of Circularly Polarized Emitters

An increasing number of circularly polarized luminescence (CPL) molecular emitters has been developed in recent years and many of them are intended for applications in which high overall CPL efficiencies are required. In order to have a complete picture of the efficiency of a CPL emitter, dissymmetry factor (g_lum) is not enough. In the following we propose a new quantity, named CPL brightness (B_CPL), which takes into account absorption extinction coefficient and quantum yield along with the g_lum factor. We calculated B_CPL value for more than 180 compounds reported in the literature and we analyse data distribution for the main classes of CPL molecular emitters. This tool can be employed to put into context new CPL active compounds and to direct the choice of molecular systems for specific CPL applications.     

Solvation-Mediated Self-Assembly from Crystals to Helices of Protic Acyclic Carbene AuI-Enantiomers with Chirality Amplification

Constructing chiral supramolecular assembly and exploring the underlying mechanism are of great significance in promoting the development of circularly polarized luminescence (CPL)-active materials. Herein, we report a solvation-mediated self-assembly from single-crystals to helical nanofibers based on the first protic acyclic (methoxy)(amino)carbenes (pAMACs) Au^I-enantiomers driven by a synergetic aurophilic interactions and H-bonds. Their aggregation-dependent thermally activated delayed fluorescence properties with high quantum yields (Φ_FL) up to 95 % were proved to be attributed to packing modes of Au⋅⋅⋅Au dimers with π-stacking or one-dimensional extended Au⋅⋅⋅Au chains. Via drop-casting method, supramolecular P- or M-helices were prepared. Detailed studies on the helices demonstrate that formations of extended helical Au⋅⋅⋅Au molecular chains amplify supramolecular chirality, leading to strong CPL with high dissymmetry factor (|g_lum|=0.030, Φ_FL=67 %) and high CPL brightness (B_CPL) of 4.87×10⁻³. Our findings bring new insights into the fabrication of helical structures to improve CPL performance by modifying aurophilic interactions.     

Synthesis and Chiroptical Properties of Chiral Carbazole-Based BODIPYs

A series of carbazole-based boron dipyrromethenes (BODIPYs) 2 a – g bearing binaphthyl units have been synthesized by the Et₂AlCl-mediated reaction of the corresponding BODIPY difluorides 1 a – g with 1,1′-binaphthalene-2,2′-diol. Substituents such as halogen, nitrile, and amino groups were tolerated under the reaction conditions, and the reaction of the phenylethynyl-substituted 1 h gave (R,R)- 3 h bearing two binaphthyl units. The chiroptical properties of these dyes with different substituents were investigated by UV/Vis, CD, fluorescence, and circularly polarized luminescence (CPL) spectroscopy. The CD spectra showed Cotton effects in the absorption region of the BODIPY moieties. In addition, they showed CPL both in solution and in the solid state. Interestingly, several dyes recorded higher g_lum values in the solid state, probably due to intermolecular interactions. Because (R,R)- 3 h recorded relatively low g_lum values, the diastereomer (R,S)- 3 h was prepared. The (R,S) diastereomer showed intense CPL, which suggests a synergetic effect of the two binaphthyl groups. Finally, chiral carbazole-based BODIPY dimers have been synthesized for the first time and their chiroptical properties were investigated. They showed redshifted fluorescence and CPL, which reached the near-IR (NIR) region in the solid state.     

Helical Oligophenylene Linked with [2.2]Paracyclophane: Stereogenic π-Conjugated Dye for Highly Emissive Chiroptical Properties

A stereogenic π-system based on dimer ( 2 ) and trimer ( 3 ) of [2.2]paracyclophane (PC) and biphenyl was prepared and its structural, photophysical, and chiroptical properties were investigated. X-ray analysis revealed that the quaterphenyl moieties in 2 adopt a double helical structure anchoring [2.2]PC from both sides. Furthermore, 3 forms a isosceles triangle structure with a large chiral cavity. A homodesmotic reaction using DFT calculations revealed that 2 has a larger strain energy than 3 owing to its highly twisted phenylene linkers. Electronic and circular dichroic (CD) spectra were recorded in CH₂Cl₂ solution. The spectra of both 2 and 3 are similar, and their longest absorption band accompanying a remarkable Cotton effect is attributed to the transition from HOMO to LUMO, which is delocalized to the quaterphenyl moiety. These compounds exhibit fairly high fluorescence quantum yields (ϕ=0.70–0.83) and moderate dissymmetry factor (|g_CPL|=1.6×10⁻³) in circularly polarized luminescence (CPL).     

Circularly Polarized Luminescence from Axially Chiral BODIPY DYEmers: An Experimental and Computational Study

With our new home‐built circularly polarized luminescence (CPL) instrument, we measured fluorescence and CPL spectra of the enantiomeric pairs of two quasi‐isomeric BODIPY DYEmers 1 and 2 , endowed with axial chirality. The electronic circular dichroism (ECD) and CPL spectra of these atropisomeric dimers are dominated by the exciton coupling between the main π–π* transitions (550–560 nm) of the two BODIPY rings. Compound 1 has strong ECD and CPL spectra (g_lum=4×10^?3) well reproduced by TD‐DFT and SCS‐CC2 (spin‐component scaled second‐order approximate coupled‐cluster) calculations using DFT‐optimized ground‐ and excited‐state structures. Compound 2 has weaker ECD and CPL spectra (g_lum=4×10^?4), partly due to the mutual cancellation of electric–electric and electric–magnetic exciton couplings, and partly to its conformational freedom. This compound is computationally very challenging. Starting from the optimized excited‐state geometries, we predicted the wrong sign for the CPL band of 2 using TD‐DFT with the most recommended hybrid and range‐separated functionals, whereas SCS‐CC2 or a DFT functional with full exact exchange provided the correct sign.     

Circularly polarized luminescence (CPL) characteristics of hydrophobic pyrene derivatives/γ-cyclodextrin (γ-CD) complexes in aqueous solution dissolved by grinding

Circularly polarized luminescence (CPL) organic dyes are currently receiving a great interest, but there are still not many reported observations of CPL spectra of hydrophobic dyes from aqueous solution. We have prepared hydrophobic pyrene derivatives and dissolved them into aqueous solutions with γ-cyclodextrin (γ-CD) by using grinding technique. Among these derivatives, (pyrene-1-carbonyl)serine (PySer) forms a spatially restricted dimer in the hydrophobic chiral cavity of γ-CD and exhibits excimer emission with a high quantum yield of Φ_f?=?0.68. In addition, circular dichroism and CPL signals were induced for the complex. The strong g_CPL value of g_CPL?=?+?2.2?×?10^?3 was obtained, which may be attributed to the interaction between the hydroxyl groups in the side chain of PySer with those of γ-CD and it strengthens the chiral dimeric structure.

Graphic abstract

     

Two-photon absorption of hydrogen-bonded octupolar molecule clusters

Charge-transfer octupolar molecules can form clusters in solution through intermolecular hydrogen bonds. In the present work we explore the role of such clustering on two-photon absorption (TPA) spectra assuming 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) as a model system. Using density functional quadratic response theory we examine different cluster structures of TATB dimers, trimers, and tetramers taken from snapshots of molecular dynamics simulations. In comparison with the TPA spectrum of a monomer, significant red shifts of charge-transfer states are predicted for all chosen clusters, which mainly is the result of the distortion of the structures induced by the aggregation. The TPA spectra for dimers and trimers show strong conformation dependence, whereas they turn out to be more stable for tetramers. Enhancements of TPA absorption have also been found for clusters containing less distorted molecules connected by hydrogen bonds.     

Synthesis of Highly Luminescent Chiral Nanographene

Chiral nanographenes with both high fluorescence quantum yields (Φ_F) and large dissymmetry factors (g_lum) are essential to the development of circularly polarized luminescence (CPL) materials. However, most studies have been focused on the improvement of g_lum, whereas how to design highly emissive chiral nanographenes is still unclear. In this work, we propose a new design strategy to achieve chiral nanographenes with high Φ_F by helical π-extension of strongly luminescent chromophores while maintaining the frontier molecular orbital (FMO) distribution pattern. Chiral nanographene with perylene as the core and two dibenzo[6]helicene fragments as the wings has been synthesized, which exhibits a record high Φ_F of 93 % among the reported chiral nanographenes and excellent CPL brightness (B_CPL) of 32 M⁻¹ cm⁻¹.     

Effects of combining of different flexible spacers in liquid crystal trimers and tetramers on transition properties

Liquid crystal trimers and tetramers containing two kinds of flexible spacers, namely O(CH₂) _m O and COO(CH₂) _n O, were divided into four classes according to the odd/even nature of the number of atoms in the flexible spacers: specifically, even–even, odd–odd, even–odd, and odd–even trimers, and even–even–even, odd–odd–odd, odd–even–odd, and even–odd–even tetramers. The transition properties of the four types of trimers and of tetramers were compared. Although the nematic–isotropic transition temperature and the associated entropy changes were primarily related to the number of the even-membered flexible spacers in these molecules, the different combinations of the flexible spacers significantly affected their transition properties.     

High‐resolution separation of homogeneous chitooligomers series from 2‐mers to 7‐mers by ion‐exchange chromatography

Highly purified chitooligomers with single degree of polymerization are of significance for studying bioactivity of chitooligomers. However, there are few reports on high‐resolution preparative separation of chitooligomers, especially for those oligomers with degree of polymerization higher than 4. This study developed a high‐resolution chromatography for the preparative separation of a pure fully deacetylated chitooligomer series. A glucosamine oligomer mixture with low degree of polymerization was prepared by acid hydrolysis of a highly deacetylated chitosan. Then, six fractions were separated from the prepared oligomer mixture by ion‐exchange chromatography and analyzed by HPLC and ESI/MS, which primarily contained glucosamine dimers, trimers, tetramers, pentamers, hexamers, and heptamers, respectively, with chromatographic purities over 98% for dimers to hexamers and a purity of 93% for heptamers. The yields of a single round of separation were 75, 60, 60, 55, 35, and 20 mg for glucosamine dimers, trimers, tetramers, pentamers, hexamers, and heptamers, respectively. Furthermore, a chromatographic separation model for GlcN homomers was established. The capacity factor (k) of glucosamine oligomers and their degrees of polymerization (DPs) exhibited a good correlation, lnk = 0.786 + 0.846 lnDP, (R² = 0.997). Based on this equation, glucosamine octamers are expected to be separated by this system.     

Synthesis,Structure, and Chiroptical Properties of Indolo- and Pyridopyrrolo-Carbazole-Based C2-Symmetric Azahelicenes

Treatment of 11,12-bis(1,1’-biphenyl-3-yl or 6-phenylpyridin-2-yl)-substituted 11,12-dihydro-indolo[2,3-a]carbazole with an oxidizing system of Pd(II)/Ag(I) induced effective double dehydrogenative cyclization to afford the corresponding π-extended azahelicenes. The optical resolutions were readily achieved by a preparative chiral HPLC. It was found that the pyridopyrrolo-carbazole-based azahelicene that contains four nitrogen atoms exhibits ca. 6 times larger dissymmetry factors both in circularly dichroism (CD) and circularly polarized luminescence (CPL), |g_CD| and |g_CPL| values being 1.1×10⁻² and 4.4×10⁻³, respectively, as compared with the parent indolocarbazole-based azahelicene. Theoretical calculations at the RI-CC2 level were employed to rationalize the observed enhanced chiroptical responses. The (chir)optical properties of the former helicene was further tuned by a protonation leading to remarkable red-shift with a considerable enhancement of the |g_CPL| value.     

Synthesis, molecular structure and catalytic activity of chiral benzamidinate nickel complexes

Two new nickel complexes containing the chiral benzamidinate ligation: [PhC(N-SiMe₃)(N′-myrtanyl)]₂Ni(py)₂(3) and {[PhC(NH)(N′-myrtanyl)]₂Ni}₂ (6) have been synthesized and characterized. The solid-state molecular structures of these complexes have been determined by low-temperature X-ray diffraction analysis. Complex 3 was obtained via two different procedures. In complex 3, the metal adopts a nearly ideal octahedral environment, whereas in complex 6 the two divalent nickel metals are coordinated in a square-planar geometry, forming a dimer. Complex 3 activated with MAO has been found to oligomerize propylene producing a mixture of dimers, trimers and tetramers with a turnover frequency of 5200 h⁻¹, whereas complex 6 being activated with MAO oligomerizes ethylene to a mixture of dimers and trimers with a high turnover frequency of 15,400 h⁻¹. In addition, when activated with MAO both complexes showed a good activity for the vinyl-type polymerization of norbornene.     

Synthesis and Structure of Linear and Cyclic Oligomers of 3-Hydroxybutanoic Acid with Specific Sequences of (R)- and (S)-Configurations

To study the stereoselectivity of enzymatic cleavage of poly(3-hydroxybutyrates) (PHB) in a well-defined system (purified depolymerase and monodisperse substrate of specific relative configuration), linear and cyclic oligomers of HB (OHBs) containing (R)- and (S)-3-hydroxybutanoate residues were synthesized. The starting material (R)-HB was prepared from natural sPHB, and (S)-HB by enantioselective reduction of 3-oxobutanoate with yeast or with H₂/Noyori-Taber catalyst (Scheme 2). The HB building blocks were then protected (O-benzyl/tert-butyl ester; Scheme 3) and coupled to give dimers 3 , 4 , tetramers 5 – 9 , and octamers 10 – 18 ; for analytical comparison, a 3mer, 5mer, 6mer, and 7mer ( 19 – 22 ) were also prepared. Two of the tetramers were subjected to macrolactonization conditions (Yamaguchi) to give the cyclic tetramers 23 and 25 and octamers 24 and 26 . All new compounds were fully characterized (m.p., [α]_D, CD, IR, ¹H- and ¹³C-NMR, MS, elemental analysis). Single-crystal X-ray structure analyses were performed with oligolides 24 and 25 (Figs. 2 and 4), and the structures, as well as the crystal packing, were compared with those of analogs containing only (R)-HB units or consisting of 3-amino- instead of 3-hydroxybutanoic-acid moieties.     

Ab initio studies of small AlmFen clusters

The equilibrium geometrical structures of small Al_mFe_n clusters have been determined through ab initio calculation of the cluster total energy at the UB3LYP/Lanl2dz level. For dimers of iron and aluminum, the dissociation energies, the equilibrium atomic distances, and the vibrational frequencies were calculated. The agreement between calculations and experiments is reasonable. The ground stable geometrical structures of Fe₄, FeAl₃, Fe₃Al and Fe₂Al₂ clusters favor three-dimension configurations, but Al₄ tetramers are planar structures. The Al-rich tetramers are more stable than the other two composition tetramers. This is different from that of bulk alloys.     

Prediction of H-Bonding Motifs for Pyrazoles and Oximes Using the Cambridge Structural Database

H-bonding motifs for pyrazoles and oximes have been examined in the Cambridge Structural Database. The accessible surface of the N atoms has been found to be useful as a discriminator to divide structures into dimer and catemer motifs for both pyrazoles and oximes. Low accessibility favors dimers and tetramers and high values favor catemers and trimers. Total molecular volume shows some correlation for oximes, while high values favor dimers. Empirical rules were successfully applied to predict the motifs of eight new structures in the subsequent release of the CSD.     

17O and 33S nuclear magnetic shielding of sulfur trioxides from the experimental measurements and theoretical calculations

In a recent ¹⁷O NMR spectra of liquid sulfur trioxide, several unexpected peaks appeared with the temperature‐dependent integrated peak ratio. In order to interpret NMR spectra and assign peaks to possible molecular structures, the theoretical quantum mechanical density functional theory and Møller–Plesset second‐order perturbation theory calculations were performed. It is suggested that in the liquid sulfur trioxide, apart from monomeric SO₃, a significant amount of (SO₃)₃ cyclic trimers should appear. No theoretical data support hypothesis on (SO₃)₂ dimers formation. Copyright © 2014 John Wiley & Sons, Ltd.     

Polymerization of glycidol and its derivatives: A new rearrangement polymerization

Anionic (KOH) polymerization of glycidol, or its trimethylsilyl ether (TMSGE) followed by hydrolysis, gives a low molecular weight, largely amorphous polymer that is not the reported 1,3-polyglycidol but, based on ¹³C-NMR, largely a 1,4-poly(3-hydroxyoxetane) with much branching. This result is achieved by a simple rearrangement of the usual, propagating secondary oxyanion to a primary one. Substantial amounts of four dimers (5–10%), four trimers, and some tetramers were also found. One dimer was isolated and shown to be glycidyl glycerin, the usual thermal dimer from glycidol. Possible structures of the other dimers are proposed. The polymerization appears to begin with the rapid formation of the glycidoxy anion , formed by base abstraction of a proton from glycidol and by nucleophilic displacement of the SiMe₃ group from TMSGE. Other bases such as KOtert-Bu give similar 1,4 polymer for glycidol but, with TMSGE, there is considerable 1,3 polymerization. Detailed mechanisms are proposed. The polymer perpared from R-TMSGE with KOH was highly crystalline, high melting (166°C), H₂O soluble, isotactic poly(3-hydroxyoxetane). The cationic polymerization of tert-butyl glycidyl ether (TBGE) and TMSGE gave low molecular weight 1,3 polyethers. The TBGE polymer was all head-to-tail whereas the polyglycidol from TMSGE contained extensive head-to-head chain units with considerable branching. Mechanisms for these interesting differences are proposed.     

Chiral Naphthalenediimides with High-Efficiency Fluorescence and Circularly Polarized Luminescence in the Solid State for the Application in Organic Optoelectronics

Naphthalenediimides (NDIs) have been extensively studied due to their tunable luminescent properties. However, generally, the monomers or aggregates of non-core substituted NDIs exhibit low fluorescence quantum yields (Φ_FL<10 %) in the solid state, which limit their applications as light-emitting materials and render their chiral species unsuitable for circularly polarized luminescence (CPL). Herein, a series of non-core substituted chiral NDIs that exhibit high luminous efficiencies (Φ_FL up to 56.8 % for racemate and 36.5 % for enantiomer) and a strong CPL behavior in the solid state is reported. These significant improvements are attributed to the unique molecular conformation of the chiral NDIs and the formation of distinctive discrete dimers. The structures of the NDIs were significantly simpler and more accessible than those of other NDIs. The findings evidence that non-core substituted NDIs can exhibit strong fluorescence in the solid state and provide a new pathway to improve photophysical properties of NDIs.     

Helical β-isoindigo-Based Chromophores with B−O−B Bridge: Facile Synthesis and Tunable Near-Infrared Circularly Polarized Luminescence

It is essential to create organic compounds that exhibit circularly polarized luminescence (CPL) in the near-infrared (NIR) range. Helicene-type emitters possess appealing chiroptical features, however, such NIR molecules are scarce due to a paucity of synthetic strategies. Herein, we developed a series of helical β-isoindigo-based B−O−B bridged aza-BODIPY analogs that were synthesized conveniently. The reaction of diimino-β-isoindigo with a heteroaromatic amine produced a restricted ligand cavity, which triggered off the generation of a B−O−B bridge. The B−O−B bridge led to distorted conformations that satisfy the helical requirements, resulting in excellent spectroscopic and chiroptical properties. Tunable CPL with the highest luminescence dissymmetry factor (g_lum) of 1.3×10⁻³ and a CPL brightness (B_CPL=11.5 M⁻¹ cm⁻¹) in the NIR region was achieved. This synthetic approach is expected to offer a new opportunity to chiral chemistry and increase flexibility for chiroptical tuning.     

HNO(H<Subscript>2</Subscript>O)<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> (<Emphasis Type="Italic">n</Emphasis> = 1–4) clusters: a theoretical study

The geometrical structure, binding energy, and vibrational spectra of small clusters of nitrosyl hydride (HNO) and water molecules, HNO(H₂O) _n , where (n = 1–4), have been investigated at the MP2 level of theory, using 6-311++G(2d,2p) basis set. We located three dimers, six trimers, nine tetramers, and three pentamers at the MP2/6-311++G(2d,2p) computational level. Particular attention is given to existence and magnitude of NH···O blue-shifting hydrogen bonds. Blue shifts of the NH stretching frequency upon complex formation in the ranges between 28 and 151 cm⁻¹ is predicted. Cooperative effect in terms of stabilization energy along with the many-body interaction energies analysis was performed for the studied clusters. The Atoms in Molecules (AIM) theory was also applied to explain the nature of the complexes.