RAFT-Mediated Emulsion Polymerization-Induced Self-Assembly for the Synthesis of Core-Degradable Waterborne Particles

Poly(N-acryloylmorpholine) (PNAM)-decorated waterborne nanoparticles comprising a core of either degradable polystyrene (PS) or poly(n-butyl acrylate) (PBA) were synthesized by polymerization-induced self-assembly (PISA) in water. A PNAM bearing a trithiocarbonate chain end (PNAM-TTC) was extended via reversible addition-fragmentation chain transfer (RAFT)-mediated emulsion copolymerization of either styrene (S) or n-butyl acrylate (BA) with dibenzo[c,e]oxepane-5-thione (DOT). Well-defined amphiphilic block copolymers were obtained. The in situ self-assembly of these polymers resulted in the formation of stable nanoparticles. The insertion of thioester units in the vinylic blocks enabled their degradation under basic conditions. The same strategy was then applied to the emulsion copolymerization of BA with DOT using a poly(ethylene glycol) (PEG) equipped with a trithiocarbonate end group, resulting in PEG-decorated nanoparticles with degradable PBA-based cores.     

Unimer Exchange Is not Necessary for Morphological Transitions in Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly (PISA) has established itself as a powerful and straightforward method to produce polymeric nano-objects of various morphologies in (aqueous) solution. Generally, spheres are formed in the early stages of polymerization that may evolve to higher order morphologies (worms or vesicles), as the solvophobic block grows during polymerization. Hitherto, the mechanisms involved in these morphological transitions during PISA are still not well understood. Combining a systematic study of a representative PISA system with rheological measurements, we demonstrate that—unexpectedly—unimer exchange is not necessary to form higher order morphologies during radical RAFT-mediated PISA. Instead, in the investigated aqueous PISA, the monomer present in the polymerization medium is responsible for the morphological transitions, even though it slows down unimer exchange.     

开环聚合诱导自组装的挑战与展望

聚合诱导自组装(PISA)是一种新兴的纳米粒子制备技术,它集聚合与组装过程于一体,可在高固含量条件下进行,因此备受青睐.此外,通过改变嵌段聚合度以及固含量等参数,可以精确地控制纳米粒子的形貌,实现从球形胶束到空心囊泡的形貌转变.然而,受限于适用于PISA体系的聚合方法和单体种类,其发展也受到了一定的限制.目前,PISA主要基于可逆加成-断裂链转移聚合(RAFT),其在聚合诱导自组装机理、形貌控制、结构表征等方面的研究成果,对于高分子化学其他领域具有重要的参考价值.然而,由于RAFT聚合诱导自组装(RAFT-PISA)体系中适用的单体往往局限于(甲基)丙烯酸酯类和苯乙烯类,导致RAFT-PISA制备的纳米粒子限于其碳-碳主链的基本结构难以生物降解,因此生物医用前景并不乐观.为了克服以上缺陷,开环聚合诱导自组装(ROPISA)应运而生,主要包括开环易位聚合诱导自组装(ROMPISA)、氨基酸-N-羧基-环内酸酐开环聚合诱导自组装(NCA-PISA)及自由基开环聚合诱导自组装(r ROPISA).由于ROMPISA体系对诸多功能性基团表现出化学惰性,从而为多功能纳米粒子的原位制备提供了新的方...     

Ultrafast Xanthate-Mediated Photoiniferter Polymerization-Induced Self-Assembly (PISA)

Polymerization-induced self-assembly (PISA) is a powerful technique for preparing block copolymer nanostructures. Recently, efforts have been focused on applying photochemistry to promote PISA due to the mild reaction conditions, low cost, and spatiotemporal control that light confers. Despite these advantages, chain-end degradation and long reaction times can mar the efficacy of this process. Herein, we demonstrate the use of ultrafast photoiniferter PISA to produce polymeric nanostructures. By exploiting the rapid photolysis of xanthates, near-quantitative monomer conversion can be achieved within five minutes to prepare micelles, worms, and vesicles at various core-chain lengths, concentrations, or molar compositions.     

基于聚合诱导自组装制备二氧化硅/聚合物纳米复合材料

纳米二氧化硅(SiO2)颗粒以其高硬度、高比表面积、高稳定、价格合理等优势被广泛应用于复合材料的制备中,获得的SiO2/聚合物复合材料通常具有优良的机械性能、很好的热稳定性以及增强的光学和电性能.近年来,随着聚合诱导自组装(PISA)的提出与发展,研究者们基于PISA发展了多种制备不同形貌聚合物纳米粒子的简便方法,为制...     

Group-Transfer Polymerization-Induced Self-Assembly (GTPISA) in Non-polar Media: An Organocatalyzed Route to Block Copolymer Nanoparticles at Room Temperature

Polymerization-induced self-assembly (PISA) enables the synthesis at large scale of a wide variety of functional nanoparticles. However, a large number of works are related to controlled radical polymerization (CRP) methods and are generally undertaken at elevated temperatures (>50 °C). Here is the first report on methacrylate-based nanoparticles fabricated by group transfer polymerization-induced self-assembly (GTPISA) in non-polar media (n-heptane). This GTPISA process is achieved at room temperature (RT) using 1-methoxy-1-(trimethylsiloxy)-2-methylprop-1-ene (MTS) and tetrabutylammonium bis-benzoate (TBABB) as initiator and organic catalyst, respectively. Under these conditions, well-defined metal-free and colorless diblock copolymers are produced with efficient crossover from the non-polar stabilizing poly(lauryl methacrylate) (PLMA) block to the non-soluble poly(benzyl methacrylate) (PBzMA) segment. The resulting PLMA-b-PBzMA block copolymers simultaneously self-assemble into nanostructures of various sizes and morphologies. GTPISA in non-polar solvent proceeds rapidly at RT and avoids the use of sulfur or halogenated compounds or metallic catalysts associated with the implementation of CRP methods, thus expanding the potential of PISA formulations for applications in non-polar environments.     

Aqueous Ring-Opening Polymerization-Induced Self-Assembly (ROPISA) of N-Carboxyanhydrides

Reported here is the first aqueous ring-opening polymerization (ROP) of N-carboxyanhydrides (NCAs) using α-amino-poly(ethylene oxide) as a macroinitiator to protect the NCA monomers from hydrolysis through spontaneous in situ self-assembly (ISA). This ROPISA process affords well-defined amphiphilic diblock copolymers that simultaneously form original needle-like nanoparticles.     

Recent Advances in Polymerization-Induced Self-Assembly (PISA) Syntheses in Non-Polar Media

It is well-known that polymerization-induced self-assembly (PISA) is a powerful and highly versatile technique for the rational synthesis of colloidal dispersions of diblock copolymer nanoparticles, including spheres, worms or vesicles. PISA can be conducted in water, polar solvents or non-polar media. In principle, the latter formulations offer a wide range of potential commercial applications. However, there has been just one review focused on PISA syntheses in non-polar media and this prior article was published in 2016. The purpose of the current review article is to summarize the various advances that have been reported since then. In particular, PISA syntheses conducted using reversible addition-fragmentation chain-transfer (RAFT) polymerization in various n-alkanes, poly(α-olefins), mineral oil, low-viscosity silicone oils or supercritical CO₂ are discussed in detail. Selected formulations exhibit thermally induced worm-to-sphere or vesicle-to-worm morphological transitions and the rheological properties of various examples of worm gels in non-polar media are summarized. Finally, visible absorption spectroscopy and small-angle X-ray scattering (SAXS) enable in situ monitoring of nanoparticle formation, while small-angle neutron scattering (SANS) can be used to examine micelle fusion/fission and chain exchange mechanisms.     

Ab initio RAFT emulsion polymerization of butadiene using the amphiphilic poly(acrylic acid‐b‐styrene) trithiocarbonate as both surfactant and mediator

Ab initio reversible addition fragmentation chain transfer (RAFT) emulsion polymerization of butadiene was investigated by using the amphiphilic poly(acrylic acid_n‐b‐styrene₅) trithiocarbonate as both surfactant and mediator. The neutralization on acrylic acid (AA) units played significant influence on the gelation. When half of the AA units were neutralized, the gelation occurred in the early stage of the polymerization so that the highest accessible molecular weight of polybutadiene was as low as 5 kg mol^?1. In the non‐neutralized conditions, the gelation was much retarded so that the highest accessible molecular weight was increased up to 23 kg mol^?1. In the non‐neutralized conditions, potassium persulfate could not initiate the polymerization. When azobisisobutyronitrile was used as initiator, the polymerization mediated by poly(acrylic acid₂₇‐b‐styrene₅) trithiocarbonate could proceed much faster than the solution polymerization did. The latex was stable. Before the gel point, molecular weight agreed well with the theoretical prediction while PDI was relatively high due to the branching reaction. The poly(butadiene‐b‐styrene) core/shell particles could obtained by extending polybutadiene. When the n value in poly (acrylic acid_n‐b‐styrene₅) trithiocarbonate was lower than 20, the coalescence would occur, leading to the formation of some coagulum. On the other hand, when n value was as high as 60, the molecular weight was out of control. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

刚柔嵌段共轭聚合物自组装体系*

刚柔嵌段共轭聚合物的自组装是超分子化学研究的热点之一。本文综述了近年来刚柔嵌段共轭聚合物自组装体系研究进展。根据共轭刚性段的不同分类进行阐述,综述了聚芴,二（苯乙烯）-蒽,聚对苯撑,聚对苯乙烯撑,聚对苯撑乙炔,聚（2,5-苯甲酮）,聚噻吩,聚苯基喹啉等作为刚性链段的刚柔嵌段共轭聚合物自组装体系,介绍了刚柔嵌段共轭聚合物的合成和光物理性质;重点评述了刚柔嵌段共轭聚合物在不同溶剂、浓度、温度等条件下自组装形成一维、二维以及三维的周期性微结构,且具有方便的可控性。概括了刚柔嵌段共轭聚合物自组装体系广阔的应用前景,尤其在光电器件领域有着潜在的应用价值。最后展望了刚柔嵌段共轭聚合物自组装体系研究和发展的方向。     

Synthesis and characterization of model diblock copolymers of poly(dimethylsiloxane) with poly(1,4‐butadiene) or poly(ethylene)

Model diblock copolymers of poly(1,4‐butadiene) (PB) and poly(dimethylsiloxane) (PDMS), PB‐b‐PDMS, were synthesized by the sequential anionic polymerization (high vacuum techniques) of butadiene and hexamethylciclotrisiloxane (D₃) in the presence of sec‐BuLi. By homogeneous hydrogenation of PB‐b‐PDMS, the corresponding poly(ethylene) and poly(dimethylsiloxane) block copolymers, PE‐b‐PDMS, were obtained. The synthesized block copolymers were characterized by nuclear magnetic resonance (¹H and ¹³C NMR), size‐exclusion chromatography (SEC), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), transmission electron microscopy (TEM), and rheology. SEC combined with ¹H NMR analysis indicates that the polydispersity index of the samples (M_w/M_n) is low, and that the chemical composition of the copolymers varies from low to medium PDMS content. According to DSC and TGA experiments, the thermal stability of these block copolymers depends on the PDMS content, whereas TEM analysis reveals ordered arrangements of the microphases. The morphologies observed vary from spherical and cylindrical to lamellar domains. This ordered state (even at high temperatures) was further confirmed by small‐amplitude oscillatory shear flow tests. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1579–1590, 2006     

Bioresorbable Hydrogels Prepared Through Stereocomplexation between Poly(L‐lactide) and Poly(D‐lactide) Blocks Attached to Poly(ethylene glycol)

Block copolymers were synthesized by ring‐opening polymerization of L ‐lactide or D ‐lactide in the presence of mono‐ or dihydroxyl poly(ethylene glycol), using zinc metal as catalyst. The resulting copolymers were characterized by various techniques, namely ¹H NMR spectroscopy, differential scanning calorimetry (DSC), X‐ray diffractometry, and Raman spectrometry. The composition of the copolymers was designed such that they were water soluble. Bioresorbable hydrogels were prepared from aqueous solutions containing both poly(L ‐lactide)/poly(ethylene glycol) and poly(D ‐lactide)/poly(ethylene glycol) block copolymers. Rheological studies confirmed the formation of hydrogels resulting from stereocomplexation between poly(L ‐lactide) and poly(D ‐lactide) blocks.

Ring‐opening polymerization of L (D )‐lactide in the presence of dihydroxyl PEG using zinc powder as catalyst.     

两亲嵌段共聚物溶液自组装新进展

综述了两亲嵌段共聚物在溶液中自组装的新进展，重点介绍了两亲嵌段共聚物自组装聚集体中棒状、蠕虫状、囊泡、洋葱和实心洋葱等几种新形态的特点和形成机理；另外对两亲嵌段共聚物溶液自组装在光电、药物释放、靶向以及作为基因工程载体方面的应用前景及两亲嵌段共聚物聚集体的制备方法作了详细的评述。     

经两亲嵌段共聚物自组装制备纳米胶束

本文介绍两亲嵌段共聚物的合成,综述了经两亲嵌段共聚物自组装制备纳米胶束的研究进展,并对该领域的发展趋势进行了展望。     

Proapoptotic Peptide Brush Polymer Nanoparticles via Photoinitiated Polymerization-Induced Self-Assembly

Herein, we report the photoinitiated polymerization-induced self-assembly (photo-PISA) of spherical micelles consisting of proapoptotic peptide–polymer amphiphiles. The one-pot synthetic approach yielded micellar nanoparticles at high concentrations and at scale (150 mg mL⁻¹) with tunable peptide loadings up to 48 wt. %. The size of the micellar nanoparticles was tuned by varying the lengths of hydrophobic and hydrophilic building blocks. Critically, the peptide-functionalized nanoparticles imbued the proapoptotic “KLA” peptides (amino acid sequence: KLAKLAKKLAKLAK) with two key properties otherwise not inherent to the sequence: 1) proteolytic resistance compared to the oligopeptide alone; 2) significantly enhanced cell uptake by multivalent display of KLA peptide brushes. The result was demonstrated improved apoptosis efficiency in HeLa cells. These results highlight the potential of photo-PISA in the large-scale synthesis of functional, proteolytically resistant peptide–polymer conjugates for intracellular delivery.     

Crystallization and Physical Ageing of Poly (2-vinyl pyridine)-b-poly(ethylene oxide) Diblock Copolymers

Summary: A set of melt miscible Poly(2-vinyl pyridine)-b-Poly(ethylene oxide) (P2VP-b-PEO) block copolymers of different compositions were studied. Transmission electron microscopy shows phase separation in the materials during the crystallization process of the PEO block as crystalline lamellae are observed for all compositions evaluated. The isothermal crystallization kinetics of PEO is progressively retarded as the P2VP content in the copolymer increases, since P2VP hinders molecular mobility in the miscible amorphous phase. Polarized light optical microscopy demonstrated that the glassy P2VP block has a negative effect on the secondary nucleation of the PEO. Finally, physical ageing experiments performed in the glassy state of the amorphous mixed phase, at different ageing times, demonstrated that a nucleating effect can be induced in the glassy state as a consequence of the reorganization of the amorphous regions. This nucleating effect significantly alters the cold crystallization rate upon subsequent heating above the glass transition temperature.     

Synthesis and Self-Assembly of Mixed-Graft Block Copolymers

Mixed-graft block copolymers (mGBCPs) consist of two or more types of polymeric side chains grafted on a linear backbone in a random, alternating, or pseudo-alternating sequence. They can phase-separate with the backbone serving as the interface of the blocks, and the side chains dominate their self-assembly behavior. mGBCPs are an accessible polymer architecture for exploring the idea of encoding polymer properties through the macromolecular architecture, as there are two distinct structural components that can be tuned: the backbone and the side chains. In this Concept article, the current literature on the synthesis of mGBCPs is reviewed, and the advantages and disadvantages of each synthetic method are noted. The self-assembly of mGBCPs is also discussed where possible. Finally, directions for future research on mGBCP synthesis and self-assembly are suggested.     

Synthesis and rheological properties of polylactide/poly(ethylene glycol) multiblock copolymers

Ring-opening polymerization of D,L-lactide was carried out in the presence of poly(ethylene glycol), using Zn powder as catalyst. The hydroxyl-capped PLA-PEG-PLA triblock copolymers were coupled with adipoyl chloride at different molar ratios under mild conditions. N-Dimethylaminopyridine (DMAP) was used as catalyst of the coupling reaction. The resulting PLA/PEG multiblock copolymers were characterized by various analytical techniques such as IR, 1H NMR, SEC, and DSC. Sol-gel transition properties of the multiblock copolymers were investigated by mechanical rheology. The data showed that the sol-gel transition temperature and the transition modulus increased with increasing molecular weight and the solution concentration of the multiblock copolymers. [Graph: see text] Variation of storage modulus (G') and loss modulus (G') as a function of temperature for a 20% sample of MB3.     

嵌段共聚物薄膜快速自组装方法

嵌段共聚物 (BCP) 薄膜可通过不同的退火方法诱导其微相分离,从而获得大面积圆柱状、层状和球状等纳米图案。这些长程有序的纳米结构形态,已经广泛应用在纳米光刻和电子器件等多个领域中。目前,有效且快速的退火方法仍然是BCP薄膜自组装技术中的研究热点。本文首先介绍了制备BCP薄膜纳米结构图案常用的退火技术,然后综述了三种新型快速退火技术,最后分析总结了这些退火技术的优缺点。