Theoretical Study on Redox Potential Control of Iron-Sulfur Cluster by Hydrogen Bonds: A Possibility of Redox Potential Programming

The effect of hydrogen bonds around the active site of Anabaena [2Fe-2S] ferredoxin (Fd) on a vertical ionization potential of the reduced state (IP(red)) is examined based on the density functional theory (DFT) calculations. The results indicate that a single hydrogen bond increases the relative stability of the reduced state, and shifts IP(red) to a reductive side by 0.31–0.33 eV, regardless of the attached sulfur atoms. In addition, the IP(red) value can be changed by the number of hydrogen bonds around the active site. The results also suggest that the redox potential of [2Fe-2S] Fd is controlled by the number of hydrogen bonds because IP(red) is considered to be a major factor in the redox potential. Furthermore, there is a possibility that the redox potentials of artificial iron-sulfur clusters can be finely controlled by the number of the hydrogen bonds attached to the sulfur atoms of the cluster.     

Synthesis of Pharmacologically Active Bis(indolyl) and Tris(indolyl) Derivatives Using Chlorotrimethylsilane

Chlorotrimethylsilane is found to be a comparatively fast and efficient catalyst for carrying out electrophilic substitution reactions of indoles with various aldehydes/ketones/triethylorthoformate, yielding excellent amount of bis(indolyl)methanes/tris(indolyl)methanes. The merits of this protocol are avoidance of any external energy source, minimal reaction time, simple and easy procedure and high yield under solvent free room temperature condition. The versatility of this method has been tested with various aldehydes/ketones and received satisfactory results.     

聚(丙烯酸钠-4-乙烯基吡啶)的生物降解性和功能性研究

用自由基共聚法制备了一系列可生物降解的功能聚合物聚(丙烯酸钠-4-乙烯基吡啶)[P(SA-co-4VP)],研究了其组成和分子量与生物降解性、资合性及分散性间的关系.结果表明:聚合物中小乙烯基吡啶含量越大,P(SA-co-4VP)的生物降解越显著.分子是一定时,少量的个乙烯基吡啶引入聚丙烯酸钠主链是增强聚合物生物降解性和保持原有功能特性的有效途径.     

Polymeric ISE for Hydrogen Sulfite Based on Bis‐Urea Calix[4]diquinones as Neutral Lipophilic Ionophores

A new PVC membrane electrode for HSO₃^? anion based on bis‐urea calix[4]diquinones I–VI as neutral ionophores is prepared. Of the various membranes prepared, the membrane based on calix[4]diquinone III exhibits a linear stable response over a wide concentration range (6.0×10^?5?1.0×10^?2) with a slope of ?51.5 mV/decade and a detection limit of 2.2×10^?6 M. With the exception of HSO₃^? anion, the remainder of the anions responds based on their hydrophobicity. The membrane revealed improved selectivity coefficients for HSO₃^? over a wide variety of other anions, and the comparable selectivity for the HSO₃^?selective membranes is iodide anion.     

碱性电解液中K3[Fe(CN)6]在锌阳极上的自发还原和吸附延长锌镍电池的循环寿命

采用K₃[Fe(CN)₆]作为锌镍电池的电解液添加剂,克服了锌阳极的变形。此外,通过一系列实验设计和表征,探索了电解液中金属锌与K₃[Fe(CN)₆]的反应机理。通过XRD (X-ray diffraction)和XPS (X-ray photo-electron spectroscopy)测试,我们发现金属锌在KOH水溶液中能够与K₃[Fe(CN)₆]反应,将[Fe(CN)₆]^3–还原为[Fe(CN)₆]⁴⁻。添加K₃[Fe(CN)₆]的锌镍电池实现了更长的循环寿命,比不添加K₃[Fe(CN)₆]的锌镍电池长3倍以上。在相同循环次数下,改性电解质中锌阳极循环不仅形状变化较小,而且没有出现“死”锌现象,电极添加剂和粘结剂也没有发生偏析。此外,不同于一般的有机添加剂,K₃[Fe(CN)₆]的加入不仅不会增大电极的极化,还能够提高锌镍电池的放电容量和倍率性能。因此,考虑到这一改性策略有着较高的可行性和较低的成本,K₃[Fe(CN)₆]添加剂在锌镍电池的实际应用中具有极大的推广潜力。     

碱性电解液中K3[Fe(CN)6]在锌阳极上的自发还原和吸附延长锌镍电池的循环寿命

In view of the continuously worsening environmental problems, fossil fuels will not be able to support the development of human life in the future. Hence, it is of great importance to work on the efficient utilization of cleaner energy resources. In this case, cheap, reliable, and eco-friendly grid-scale energy storage systems can play a key role in optimizing our energy usage. When compared with lithium-ion and lead-acid batteries, the excellent safety, environmental benignity, and low toxicity of aqueous Zn-based batteries make them competitive in the context of large-scale energy storage. Among the various Zn-based batteries, due to a high open-circuit voltage and excellent rate performance, Zn-Ni batteries have great potential in practical applications. Nevertheless, the intrinsic obstacles associated with the use of Zn anodes in alkaline electrolytes, such as dendrite, shape change, passivation, and corrosion, limit their commercial application. Hence, we have focused our current efforts on inhibiting the corrosion and dissolution of Zn species. Based on a previous study from our research group, the failure of the Zn-Ni battery was caused by the shape change of the Zn anode, which stemmed from the dissolution of Zn and uneven current distribution on the anode. Therefore, for the current study, we selected K₃[Fe(CN)₆] as an electrolyte additive that would help minimize the corrosion and dissolution of the Zn anode. In the alkaline electrolyte, [Fe(CN)₆]^3– was reduced to [Fe(CN)₆]^4– by the metallic Zn present in the Zn-Ni battery. Owing to its low solubility in the electrolyte, K₄[Fe(CN)₆] adhered to the active Zn anode, thereby inhibiting the aggregation and corrosion of Zn. Ultimately, the shape change of the anode was effectively eliminated, which improved the cycling life of the Zn-Ni battery by more than three times (i.e., from 124 cycles to more than 423 cycles). As for capacity retention, the Zn-Ni battery with the pristine electrolyte only exhibited 40% capacity retention after 85 cycles, while the Zn-Ni battery with the modified electrolyte (i.e., containing K₃[Fe(CN)₆]) showed 72% capacity retention. Moreover, unlike conventional organic additives that increase electrode polarization, the addition of K₃[Fe(CN)₆] not only significantly reduced the charge-transfer resistance in a simplified three-electrode system, but also improved the discharge capacity and rate performance of the Zn-Ni battery. Importantly, considering that this strategy was easy to achieve and minimized additional costs, K₃[Fe(CN)₆], as an electrolyte additive with almost no negative effect, has tremendous potential in commercial Zn-Ni batteries.     

聚丙烯酸[2,5-双(对甲氧基苯甲酰氧基)苄酯]及聚甲基丙烯酸[2,5-双(对甲氧基苯甲酰氧基)苄酯]的合成

周其凤等曾报道聚丙烯酸［２,５－双（对甲氧基苯甲酰氧基）节酯］［１］和聚甲基丙烯酸［２,５－双（对甲氧基苯甲酰氧基）苄酯］［２］的合成．但后来的研究发现,在合成单体的条件下出现的一种未见报道的异常反应［３］使产物成分复杂化,因此当时报道的聚合物可能不是聚丙烯酸［２,５－双－（对甲氧基苯甲酰氧基）苄酯］或聚甲基丙烯酸［２,５－双（对甲氧基苯甲酰氧基）苄酯］,而可能是共聚物．针对这一问题,我们重新设计了合成路线以避免发生上述副反应,成功地合成了丙烯酸或ａ－甲基丙烯酸［２,５－双－（对甲氧基苯甲酰氧基…     

手性催化剂(4R)-苄氧基-(S)-脯氨酸的合成及其对不对称羟醛反应的催化活性

手性催化剂(4R)-苄氧基-(S)-脯氨酸的合成及其对不对称羟醛反应的催化活性;羟醛反应     

Syntheses and Crystal Structures of Two Gd（Ⅲ） Hydrogen Supramolecules Based on p-Sulfonatothiacalix[4]arene

Two novel polymeric complexes, [Gd（HsTCAS）（H2O）7]·4H2O 1 and [Gd（HsTCAS） （CH3COCH3）（H2O）6]·6H2O 2 （H4TCAS = p-sulfonatothiacalix[4]arene）, have been synthesized and characterized by single-crystal X-ray diffraction analyses. Complex 1 crystallizes in monoclinic, space group C2/m with a = 20.2308（12）, b = 19.0894（10）, c = 12.2448（7）A, β = 101.847（3）°, V = 4628.1（5）A^3, C24H43GdO27S8, Mr = 1169.25, Z = 4, Dc = 1.690 g/cm^3, F（000） = 2380,μ = 1.879 mm^-1, the final R = 0.0404 and wR = 0.1038 for 5127 observed reflections with I 〉 2σ（I）. Complex 2 is pseudo-isostructural with complex 1.     

Synthesis of (4R)-Methylnonan-1-ol and (4R,8RS)-Dimethyldecanal from (S)-(+)-3,7-Dimethyl-1,6-octadiene

Optically active (4R,8RS)-dimethyldecanal, an analog of the aggregation pheromone of the flour beetles Tribolium confusum and T. Castaneum, and (4R)-methylnonan-1-ol, the sex pheromone of the yellow mealworm Tenebrio molitor L., are synthesized using ozonolytic transformation of (6R,10)-dimethyl-9-undecen-2-one to (6R)-methyl-9-hydroxynonan-2-one in the key step. The starting compound is available as enantiomerically enriched (ee ~50%) (S)-(+)-3,7-dimethyl-1,6-octadiene.     

An Unusual Binodal （4,12）-Connected 3D Supramolecular Network Based on [Mn4（OH）e（H20）2]6＋ Subunits

A new two-dimensional Mnn metal-organic framework (MOF), [Mn4(μ3-OH)2L2 (4,4'-bipy)2(H20)2]·H2O (1, H3L = 5-oxyacetateisophthalic acid, 4,4'-bipy = 4,4'-bipyridine) has been synthesized by the hydrothe...     

Bis(O-nitrophenyl) Carbonate as a New Reagent for the Synthesis of Chiral Oxazolidin-2-ones

Bis(o-nitrophenyl) carbonate reacts under mild conditions with chirals 1,2-amino alcohols and, after addition of DMAP, affords the corresponding oxazolidin-2-ones in very good yields.     

Theoretical Studies on the Stabilities and Hydrogen Bond Actions of （H2O）n Clusters

1 INTRODUCTION In the latest ten years, the structure and function of water clusters have captured the interest of chemists. One of the most important study objects in water cluster is to describe the behavior of water so- lution quantitatively at molecule level, which will pave the way for the solving of some environmental and other scientific problems, such as the formation of acid rain and nucleation mechanism of little water drop. Besides, weak interaction in water clusters could be al…     

The sorption mechanism of Au(III) on sulfur-containing chelating resin poly[4-vinylbenzyl (2-hydroxyethyl) sulfide]

The sorption mechanism of sulfur-containing chelating resin, poly[4-vinylbenzyl (2-hydroxyethyl) sulfide], towards Au(III) was investigated by Fourier transform infrared spectra (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy dispersive X-ray microanalysis (EDX), and X-ray diffraction (XRD). It was showed that the sulfide bond in the resin was oxidized into sulfoxide and sulfone bond, and Au(III) was deoxidized into Au(0).     

簇合物[Et4N]2[Mo2S4(SCH2CH2S)2]的合成及其结构研究

以(NH4)2MoS4,Et4NBr,HSCH2CH2SH为原料,合成出[Et4N]2[Mo2S4(SCH23CH2S)2]簇合物,用X射线衍射法测定了晶胞结构.其晶胞参数为a=1.0304(8)nm,b=1.4158(8)nm,c=1.1417(1)nm,V=1.63801nm3,Z=4,晶体属单斜晶系,晶体结构经块状矩阵最小二乘法修正后,最终偏离因子R=0.089.此外还进行了红外光谱,紫外可见光谱的测定.     

(S)-(4-溴-2-甲苯)(3-甲基吗啉)甲酮的合成

以(S)-2-氨基丙醇和氯乙酰氯为起始原料,经酰化和环合反应制得(S)-5-甲基吗啉-3-酮（4）; 4经还原制得(S)-3-甲基吗啉(5); 5与4-溴-2-甲基苯甲酸酰化缩合合成了(S)-(4-溴2-甲基苯基)(3-甲基吗啉)-甲酮,总收率57%,其结构经¹H NMR 和 ¹³C NMR确证。     

Synthetic and spectroscopic characterization of Rh(I)-( S )-amino acid complexes with diphosphine and triphosphine ligands

Reaction of [Rh(η⁴-cod)(S)-amino-acidato] ((S)-amino acidate?=?(S)-O₂C-CHR-NH₂; cod?=?cycloocta-1,5-diene) with 1,2-bis(diphenylphosphino)ethane (dppe) affords the ionic [Rh(dppe)₂]{(S)-O₂C-CHR-NH₂} (R?=?Me, I; Ph, II) complexes. Reactions with 1,3-bis(diphenylphosphino)propane (dppp) or 2,2,2-tris(diphenylphosphinomethyl)ethane (triphos) give the neutral [Rh(dppp){(S)-O₂C-CHR-NH₂}] (R?=?Me, III; Ph, IV) or [Rh(η²-triphos){(S)-O₂C-CHR-NH₂}] (R?=?Me, V; Ph, VI) complexes. The complexes are characterized by elemental analysis, UV–Vis-, IR-, ¹H/³¹P{¹H} NMR- and mass-spectroscopy. Two molecules of dppe coordinate to the Rh(I) symmetrically by replacing both cod and (S)-amino acidate to give I–II. Only one molecule of dppp (or triphos) coordinate to the Rh(I) asymmetrically by replacing only cod to give III–VI. Two diastereomeric Rh(I)-complexes are present in V and VI. The results further suggest that the ligands are arranged in a distorted square planar geometry around the Rh(I) centre. The use of triphos instead of dppe or dppp yields the same coordination sphere.     

Synthesis of well‐defined second‐generation dendritic polymers of isoprene (I) and styrene (S): (S2I)3, (SI′I)3, (I″I′I)3, and (I′2I)4

The synthesis of second‐generation (G‐2) dendritic polymers of isoprene (I) and styrene (S) was achieved with anionic polymerization high‐vacuum techniques and by performing the following steps: (1) selective reaction of a living chain with the chlorosilane group of 4‐(chlorodimethylsilyl)styrene (a dual‐functionality compound) to produce a macromonomer, (2) addition of a second living chain (same or different) to the double bond of the macromonomer, (3) polymerization of I with the anionic sites, and (4) reaction of the produced off‐center living species with trichloromethyl silane or tetrachlorosilane (CH₃SiCl₃ or SiCl₄). The combined characterization results showed that the G‐2 dendritic macromolecules synthesized—(S₂I)₃, (SI′I)₃, (I″I′I)₃, (I′₂I)₄—have a high molecular and compositional homogeneity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1519–1526, 2002     

Synthesis and Crystal Structure of 4,4'-(4-(1-Naphthyl)-4-phenyl-1,3-butadienylidene)-bis[N,N-diethylbenzenamine]

1 INTRODUCTION Organic photo-conductors (OPCs), due to their great advantages over inorganic ones, have been widely used in xerography and holography and aroused considerable interest in the past several de- cades. Recently, almost all OPCs are of a layered structure with a thin charge generation layer (CGL) and a charge transport layer (CTL). Current resear- ches are directed to both improving the chara- cteristics of existing OPCs and developing new ma- terials for future applicati…     

Palladium‐catalyzed cyanation reaction of aryl halides using K4[Fe(CN)6] as non‐toxic source of cyanide under microwave irradiation

An efficient method for preparation of aryl nitriles—using [Pd{C₆H₂(CH₂CH₂ NH₂)‐(OMe)₂,3,4} (µ‐Br)]₂ complex as an efficient catalyst and K₄[Fe(CN)₆] as a green cyanide source—from aryl bromides, aryl iodides and aryl chlorides under microwave irradiation has been reported. This complex has been demonstrated to be an active and efficient catalyst for this reaction. Using a catalytic amount of this synthesized palladium complex in DMF at 130 °C led to production of the cyanoarenes in excellent yields in short reaction times. Copyright © 2010 John Wiley & Sons, Ltd.