Dynamic Cross‐Exchange in Halophosphonium Species: Direct Observation of Stereochemical Inversion in the Course of an SN2 Process

The complex fluxional interconversions between otherwise very similar phosphonium bromides and chlorides R₃PX⁺X^? (R=Alk, Ar, X=Cl or Br) were studied by NMR techniques. Their energy barriers are typically ca. 11 kcal mol^?1, but rise rapidly as bulky groups are attached to phosphorus, revealing the importance of steric factors. In contrast, electronic effects, as measured by Hammett analysis, are modest (ρ 1.46) but still clearly indicate negative charge flow towards phosphorus in the transition state. Most significantly, detailed analysis of the exchange pathways unequivocally, and for the first time in any such process, shows that nucleophilic attack of the nucleophilic anion on the tetrahedral centre results in inversion of configuration.     

Bifunctional Behavior of Unsaturated Intramolecular Phosphane–Borane Frustrated Lewis Pairs Derived from Uncatalyzed 1,4‐Hydrophosphination of a Dienylborane

Three unsaturated C₄‐bridged phospane/borane frustrated Lewis pairs (P/B FLPs) are prepared by uncatalyzed hydrophosphination of a dienylborane. The systems are bifunctional. Consequently, two examples undergo clean hydroboration reactions with HB(C₆F₅)₂ to yield B/B/P systems. The 1,4‐P/B system (C₆F₅)₂B?CH₂CH?CMeCH₂PMes₂ reacts with benzaldehyde initially by allylborane addition, followed by internal P/B FLP addition to the pendant C?C double bond, to yield a bicyclic product. The corresponding reaction of (C₆F₅)₂B?CH₂CH?CMeCH₂PtBu₂ stops at the allylborane/benzaldehyde addition product. The related system (C₆F₅)₂B?CH₂CH?CMeCH₂PPh₂ shows a similar bifunctional reaction pattern, whereby allylborane addition to benzaldehyde is combined with P/B addition to a second aldehyde equivalent to form the eight‐membered heterocyclic 1:2 addition product.     

Formation of Active Cyclic Five-membered Frustrated Phosphane/Borane Lewis Pairs and their Cycloaddition Reactions

The cyclic five-membered frustrated phosphane/borane Lewis pairs 11 a , b featuring the bulky octaethylhydrindacenyl- (Eind) substituent or its mono-bromo derivative (^BrEind) at phosphorus are monomeric at room temperature. The reactive frustrated Lewis pairs (FLPs) cleave dihydrogen. The cyclic FLP 11 b (^BrEind) undergoes 1,2-P/B addition to ethylene to give the zwitterionic heteronorbornane derivative 14 b . It reacts similarly with the carbon–carbon double bond of norbornene. With a variety of organic π-reagents, the cyclic FLP 11 b often undergoes reaction sequences reminiscent of the Alder–Rickert reaction: the cycloaddition reaction is followed by rapid cycloreversion to form new five-membered heterocyclic FLP products with extrusion of ethene. Reactions of 11 b with benzaldehyde or with acetylenes follow this reaction pattern.     

Frustrated Lewis-Pair Neighbors at the Xanthene Framework: Epimerization at Phosphorus and Cooperative Formation of Macrocyclic Adduct Structures

Attachment of a pair of P-stereogenic mesityl(alkynyl)phosphanyl groups at the 4- and 5-positions of a 9,9-dimethylxanthene framework gave mixtures of the respective rac- and meso-bisphosphanyl diastereoisomers. They slowly epimerized in a thermally induced reaction with Gibbs activation barriers of about 25 kcal mol⁻¹ at room temperature (measured and DFT calculated). The reaction of the meso-mesityl(tert-butylethynyl)phosphanyl derivative with two molar equivalents of Piers′ borane [HB(C₆F₅)₂] led to the formation of the alkylidene-bridged geminal bisphosphane/borane-frustrated Lewis pair system. The compound was obtained enriched (>85 %) in the rac diastereoisomer. With a variety of bifunctional donor substrates, the rac-bis-P/B FLP formed macrocyclic compounds. They were all formally derived from meso-configurated diastereoisomers of the bisphosphanylxanthene backbone.     

Expedient Synthetic Identification of a P-Stereogenic Ligand Motif for the Palladium-Catalyzed Preparation of Isotactic Polar Polypropylenes

The iso-specific statistical copolymerization of unprotected polar monomers with propylene remains a grand challenge in the field of polymer chemistry. Current research is hampered because only a single natural-product-derived dimenthylphosphine-motif is known to allow for the preparation of moderately isotactic polypropylene copolymers. To overcome this structural limitation, we developed time-efficient synthetic methods that facilitate P-donor ligand development. The strength of these methods was demonstrated with preparation of twenty-five new P-stereogenic phosphine/sulfonate- and bisphosphine-monoxide-type palladium catalysts, which could typically be developed in parallel. A lead candidate was identified for iso-specific propylene polymerization. The best-performing catalysts utilizing the P-stereogenic donor motif achieved triad isotacticities of up to mm=0.75—the highest value within those reported for group 10 metal catalysts—for the homo- and copolymerization of propylene with unprotected polar monomers at an industrially relevant temperature of 50 °C.     

Using the Secondary PH/BH Functional Groups of an Active Geminal Frustrated Lewis Pair for Carbon Monoxide Reduction and Reactions with Nitriles and Isonitriles

Reaction of the secondary alkynyl(Mes*)PH phosphane 2 with (Fmes)BH₂?SMe₂ gives the geminal PH/BH frustrated Lewis pair (FLP) 3 . The PH and the BH functions are jointly used in the reduction of carbon monoxide under mild reaction conditions to give the [P]‐CH₂‐O‐[B] product. A subsequent cycloaddition sequence results in the liberation of formaldehyde. The FLP 3 reacts with benzonitrile to give a P‐benzamidine, and it couples two isonitriles at the FLP framework.     

Effect of the Linking Structure of Nonlinear Optical Side Groups on the Phase Behavior of an Aromatic Polyester Backbone

Summary: The phase behavior of poly(p‐phenylene terephthalate)s (PPT) with pendant side groups, N‐(4‐nitrophenyl)ethylaminoethanol (NPE) and N‐(4‐nitrophenyl)‐L ‐prolinol (NPP) has been studied by using differential scanning calorimetry (DSC), wide‐angle X‐ray scattering (WAXS), and second harmonic generation (SHG). PPT‐NPE showed a layered liquid crystalline morphology while PPT‐NPP showed a completely amorphous structure. Compressive or shear stress applied on the polymer melt surface at 210 °C induced a more prominent layered structure of PPT‐NPE whereas the amorphous structure of PPT‐NPP remained unchanged under the stress. In order to understand this phase difference in terms of the repeat structure, we attempted theoretical ab initio Hartree‐Fock, and DFT calculations for the monomers and molecular dynamics for the bulk state. The results indicated that molecular configurations are a good way of microscopically understanding the phases of rigid backbone polymers with functional side groups: The NPT (constant particle number, pressure, and temperature) simulation data at 210 °C agree qualitatively with the experimental data and the difference between PPT‐NPE and PPT‐NPP could be understood using rotational energy barrier, steric hindrance and inter‐chain interactions. X‐ray diffractometer (XRD) simulation patterns for the oligomers are also in qualitative agreement with the experimental WAXS data and the structural parameters of stacks of PPT‐NPE chains are estimated to be layer distance (4.6 Å), backbone distance (21.5 Å), and side distance (12 Å).

     

Synthesis and NMR Study of α‐Keto Stabilized Ylides of the Type RCOCH=PAr3, (R=MeO‐C6H4, Cl‐C6H4, NO2‐C6H4, α‐Thiophenyl and Naphthyl; Ar = p‐Tolyl or Phenyl)

Synthesis and characterization of five new phosphonium salts and related phosphorus ylides of the type R‐COCH=PAr₃ are reported. The reaction of bromo 4′‐methoxo/chloro/nitro acetophenone, α‐thiophenyl and naphthoyl acetophenone with triphenylphosphine or triparatolylphosphine in acetone gives phosphonium salts. Dehydrogenation of these salts in aqueous sodium hydroxide solution form ylides. Characterization of obtained compounds was performed by IR, ¹H, ¹³C, ³¹PNMR and elemental analysis.     

α‐Hydroxymethylation of Pyridines at a Frustrated Lewis Pair Template

The “η²‐formylborane” moiety formed by CO reduction with HB(C₆F₅)₂ at a P/B frustrated Lewis pair template undergoes a hydroxymethylation reaction at the α‐position to nitrogen in pyridine or isoquinoline. The analogous reaction with pyrimidine revealed a mechanism related to the Tschitschibabin reaction.     

Voltammetric Behavior of Nitrofurazone at Highly Boron Doped Diamond Electrode

The electrochemical behavior of nitrofurazone (NFZ) at a highly boron doped diamond (BDD) electrode was studied in Britton‐Robinson (BR) buffer using cyclic voltammetry. NFZ was directly reduced to the amine derivative (RNH₂) in the pH range of 2.0 to 4.0 in a process involving six (6.0±0.4) electrons and six protons. In the range of pH 7.0 to 12 and, predominantly aqueous medium, the reduction step split into its two components: the reduction of NFZ to the radical anion (RNO₂^.?) and reduction of RNO₂^.? to hydroxylamine derivative (RNHOH) in processes involving one and three (3.1±0.1) electrons, respectively. On the anodic scan of the voltammograms and at pH 8.0, the oxidation of the hydroxylamine to the nitroso derivative (RNO), was observed in a process involving 2 (1.7±0.2) electrons and 2 protons. In addition and unreported in the literature on any electrode material, was the detection of a new oxidation peak at pH>8.0, which was observed regardless of whether NFZ had been previously reduced or not. The calculation of n, number of electrons, involved in each electrochemical step was satisfactorily accomplished using the Randles‐?evcik equation.     

Coupling of Carbon Monoxide with Nitrogen Monoxide at a Frustrated Lewis Pair Template

Coupling of carbon monoxide with nitrogen monoxide was achieved at a frustrated Lewis pair template. This unique reaction uses hydride as an auxiliary, which reductively activates carbon monoxide at the frustrated Lewis pair. The CO/NO coupling reaction then takes place through a pathway involving a radical reaction in which the hydrogen atom auxiliary is eventually removed again.     

主链含偶氮电活性聚酰胺材料的合成与性质

社会的发展和科技的进步不断对材料提出新的要求,功能材料已经成为新的研究热点,因此设计和研究高分子材料的多功能一体化具有重要的科学和现实意义。作为功能高分子材料的一种,聚苯胺因具有原料廉价、制备简便、环境稳定性好等一系列优点,以及特殊的光学、电学、磁学性质等而成为最具应用潜力的导电高分子材料[1-4]。然而聚苯胺结构上的缺陷和不溶不熔的现象,阻碍了人们对聚苯胺的微观研究和加工应用[5,6]。苯胺齐聚物具有明确的分子结构和良好的溶解性,同时光学和电学性质与聚苯胺十分相似[7,8],基本具备了成为聚苯胺替代者的条件,仅由于缺乏良好的机械性能和环境稳定性而发展受到限制。因此我们从分子设计入手,采用氧化偶联聚合方法,将苯胺齐聚物链段和具有光致异构特性的偶氮苯基团同时引入到具有良好综合性能的聚酰胺主链中,制备出一种兼具光活性和电活性的多功能聚合物材料。     

多巴胺在聚亚甲基蓝/石墨烯修饰电极上的电化学行为研究

利用电聚合方法在石墨烯修饰的玻碳电极表面制备了聚亚甲基蓝/石墨烯修饰电极(PMB/GH/GCE)。采用循环伏安法(CV)和差分脉冲伏安法(DPV)研究了多巴胺(DA)和抗坏血酸(AA)在该修饰电极上的电化学行为。在pH 6.9的磷酸盐缓冲溶液中,DA和AA分别在0.208 V和-0.108 V处产生灵敏的氧化峰,与其在聚亚甲基蓝和石墨烯单层修饰电极上的电化学行为相比,两者的峰电流明显增加,峰电位差达316 mV。研究表明,电聚合方法使亚甲基蓝牢固地非共价修饰到石墨烯上,并产生协同增效作用,较好地提高了电极的灵敏度和分子识别性能,有利于在大量AA存在下实现对DA的选择性测定。在1.00×10-3mol/L AA的存在下,DA的差分脉冲伏安法峰电流与其浓度在1.00×10-7～5.00×10-3mol/L范围内呈良好的线性关系,检出限达1.00×10-8mol/L。将该方法用于盐酸多巴胺注射液的测定,结果满意。     

Exploring the Limits of Frustrated Lewis Pair Chemistry with Alkynes: Detection of a System that Favors 1,1‐Carboboration over Cooperative 1,2‐P/B‐Addition

The zirconocene complex [{(C₆F₅)₂B‐(CH₂)₃‐Cp}(Cp‐PtBu₂)ZrCl₂] ( 6 ; Cp=cyclo‐C₅H₄) was prepared by hydroboration of [(allyl‐Cp)(Cp‐PtBu₂)ZrCl₂] ( 5 ) with HB(C₆F₅)₂ (“Piers’ borane”). It represents a frustrated Lewis pair (FLP) in which both the Lewis acid and the Lewis base were attached at the metallocene framework. Its reaction with 1‐pentyne did not result in the 1,2‐addition of or deprotonation reaction by the FLP, but rather in the 1,1‐carboboration of the triple bond, thereby obtaining a Z/E mixture (1.2:1) of the respective organometallic substituted alkenes 7 . The analogous reaction of 1‐pentyne with the phosphorous‐free system [{(C₆F₅)₂B‐(CH₂)₃‐Cp)}CpZrCl₂] ( 9 ) gave the respective 1,1‐carboboration products ( Z‐10 / E‐10 ≈1.3:1).     

ZnO/Boron Nitride Quantum Dots Nanocomposites for the Enhanced Photocatalytic Degradation of Methylene Blue and Methyl Orange

In this study, a heterostructure photocatalyst of ZnO nanoparticles decorated with boron nitride quantum dots (ZnO/BNQDs) was successfully synthesized by a simple solution procedure. The synthesized ZnO/BNQDs show that the BNQDs effectively suppress the recombination of photoinduced electrons and holes and the transfer of holes from ZnO nanoparticles by the formation of a heterojunction. The ZnO/BNQD nanocomposites thus demonstrate superior photocatalytic performances and excellent stability for the degradation of methylene blue (MB) and methyl orange (MO) under UV light irradiation. Based on the obtained results, the possible photocatalytic mechanism is proposed and discussed. Thus, the ZnO/BNQD nanocomposites demonstrate potential as an efficient low-cost photocatalyst for application in the photodegradation of organic dyes in wastewater for environmental remediation.