Identification of SARS-CoV-2 Receptor Binding Inhibitors by In Vitro Screening of Drug Libraries

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is responsible for the coronavirus disease 2019 (COVID-19) global pandemic. The first step of viral infection is cell attachment, which is mediated by the binding of the SARS-CoV-2 receptor binding domain (RBD), part of the virus spike protein, to human angiotensin-converting enzyme 2 (ACE2). Therefore, drug repurposing to discover RBD-ACE2 binding inhibitors may provide a rapid and safe approach for COVID-19 therapy. Here, we describe the development of an in vitro RBD-ACE2 binding assay and its application to identify inhibitors of the interaction of the SARS-CoV-2 RBD to ACE2 by the high-throughput screening of two compound libraries (LOPAC^®1280 and DiscoveryProbeTM). Three compounds, heparin sodium, aurintricarboxylic acid (ATA), and ellagic acid, were found to exert an effective binding inhibition, with IC50 values ranging from 0.6 to 5.5 µg/mL. A plaque reduction assay in Vero E6 cells infected with a SARS-CoV-2 surrogate virus confirmed the inhibition efficacy of heparin sodium and ATA. Molecular docking analysis located potential binding sites of these compounds in the RBD. In light of these findings, the screening system described herein can be applied to other drug libraries to discover potent SARS-CoV-2 inhibitors.     

A novel BF<Subscript>2</Subscript>–curcumin-based fluorescent chemosensor for detection of Cu<Superscript>2+</Superscript> in aqueous solution and living cells

A novel BF₂–curcumin-based chemosensor 1, namely monopicolinate of BF₂–curcumin complex, was designed, synthesized and applied for the detection of Cu²⁺ in aqueous buffer solution and living cells. Sensor 1 exhibited sensitive naked-eye color change toward Cu²⁺ from blue to pink in TBS solution and the detection limit was estimated to be 0.12 µM. The selectivity of sensor 1 for Cu²⁺ was high over competing metal ions (Ag⁺, Cu⁺, Hg²⁺, Mg²⁺, Ca²⁺, Co²⁺, Zn²⁺, Mn²⁺, Ni²⁺, Fe²⁺ and Fe³⁺). Based on the experimental results, the sensing mechanism was proposed for the Cu²⁺ triggered hydrolysis of 1 to BF₂–curcumin which has unique chromogenic and fluorogenic properties. Compared with other chemosensors with a similar mechanism, chemosensor 1 had a comparatively large Stokes shift and the emission wavelength was close to NIR. Moreover, cell imaging investigations indicated that sensor 1 has the potential to be applied for practical Cu²⁺ detection in biological systems.     

A new perylene diimide-based colorimetric and fluorescent sensor for selective detection of Cu<Superscript>2+</Superscript> cation

A new perylene diimide (PDI) ligand (1) functionalized with a dipicolylethylenediamine (DPEN) moiety was synthesized and first used as a colorimetric and fluorometric dual-channel sensor to specifically detect the presence of Cu²⁺ over a wide range of other cations. The solution of 1 (10 μmol/L) upon addition of Cu²⁺ displayed distinguishing pink color compared with other cations including K⁺, Ni²⁺, Ca²⁺, Mn²⁺, Na⁺, Sr²⁺, Zn²⁺, Co²⁺, Cd²⁺, Mg²⁺, Cr³⁺, Ag⁺, and Ba²⁺, indicating the sensitivity and selectivity of 1 to Cu²⁺. Thus, the advantage of this assay is that naked-eye detection of Cu²⁺ becomes possible. Moreover, among these metal ions investigated, only Cu²⁺ quenched more than half fluorescent intensity of 1. The ESI-TOF spectrum of a mixture of 1 and CuCl₂ in combination of the fluorescence titration spectra of 1 (10 μmol/L) upon addition of various amounts of Cu²⁺ revealed the formation of a 2:1 metal-ligand complex through the metal coordination interaction. Supported by the National Natural Science Foundation of China (Grant Nos. 20872101 & 20772086)     

多色彩可视化半定量检测方法用于COVID-19患者治疗过程中抗体浓度变化的快速监测

现场快速定量检测新型冠状病毒(SARS-CoV-2)抗体对于监测新型冠状病毒感染的肺炎患者治疗过程具有重要作用. 目前, 大多数抗体检测采用基于金纳米粒子的免疫层析定性检测, 但该方法仅表现出一种颜色变化, 无法实现现场快速定量检测. 本文采用特异性刻蚀金纳米棒(Au NRs)的方法, 实现了SARS-CoV-2抗体多色彩可视化的现场快速定量检测. 首先, 将SARS-CoV-2重组抗原固定在96孔酶标板上; 随后, 将辣根过氧化物酶标记的酶标抗体与待测抗体结合, 形成抗原-待测抗体-酶标抗体的复合三明治结构, 且酶标抗体与待测抗体浓度呈正相关; 由于酶标抗体可与3,3',5,5'-四甲基联苯胺(TMB)发生特异性反应, 生成TMB²⁺, 而TMB²⁺可选择性刻蚀Au NRs, 使得溶液产生丰富多彩的颜色, 即可通过观察溶液颜色变化实现SARS-CoV-2抗体浓度半定量检测. 在最佳条件下, 该方法对SARS-CoV-2 IgM抗体在5.00~200 IU浓度范围内呈良好线性关系, 检出限为1.29 IU, 并具有较高的灵敏度和特异性. 上述方法成功用于COVID-19患者治疗过程中SARS-CoV-2 IgM抗体浓度半定量快速检测.     

A Colorimetric and Fluorimetric Chemodosimeter for Copper Ion Based on the Conversion of Dihydropyrazine to Pyrazine

In this research, we successfully synthesized and fully characterized the new compound 5,8,13,16,21,24‐hex‐(triisopropylsilyl)ethynyl)‐6,23‐dihydro‐6,7,14,15,22,23‐hexaza‐trianthrylene ( HHATA , brown color in a mixed solvent of CH₂Cl₂/CH₃CN 1:1, v/v, weakly blue fluorescent), which can be easily oxidized to 5,8,13,16,21,24‐hex‐(triisopropylsilyl)ethynyl)‐6,7,14,15,22,23‐hexazatrianthrylene ( HATA ) (yellow color in CH₂Cl₂/CH₃CN 1:1, v/v), red fluorescent) by Cu²⁺ ions. This reaction only proceeds efficiently in the presence of Cu²⁺ ions when compared with other common metal ions such as Fe³⁺, Co²⁺, Mn²⁺, Hg²⁺, Ni²⁺, Pb²⁺, Ag⁺, Mg²⁺, Ca²⁺, K⁺, Na⁺, and Li⁺. Our result suggests that this reaction can be developed as an effective method for the detection of Cu²⁺ ions.     

Screening of Natural Products Inhibitors of SARS-CoV-2 Entry

The COVID-19 pandemic has led to the search for new molecules with antiviral activity against SARS-CoV-2. The entry of the virus into the cell is one of the main targets for inhibiting SARS-CoV-2 infection. Natural products are an important source of new therapeutic alternatives against diseases. Pseudotyped viruses allow the study of SARS-CoV-2 viral entry inhibitors, and due to their simplicity, they allow the screening of a large number of antiviral candidates in Biosafety Level 2 facilities. We used pseudotyped HIV-1 with the D614G SARS-CoV-2 spike glycoprotein to test its ability to infect ACE2-expressing HEK 293T cells in the presence of diverse natural products, including 21 plant extracts, 7 essential oils, and 13 compounds from plants and fungi. The 50% cytotoxic concentration (CC₅₀) was evaluated using the resazurin method. From these analyses, we determined the inhibitory activity of the extract of Stachytarpheta cayennensis, which had a half-maximal inhibitory concentration (IC₅₀) of 91.65 µg/mL, a CC₅₀ of 693.5 µg/mL, and a selectivity index (SI) of 7.57, indicating its potential use as an inhibitor of SARS-CoV-2 entry. Moreover, our work indicates the usefulness of the pseudotyped-virus system in the screening of SARS-CoV-2 entry inhibitors.     

Cu2+ and Cu+ bathocuproine disulfonate complexes promote the oxidation of the ROS-detecting compound dichlorofluorescin (DCFH)

The water-soluble Cu⁺chelator bathocuproine disulfonate (BCS) is widely used to quantify Cu⁺ or detect Cu⁺ formation in Cu²⁺-initiated oxidation reactions. The dichlorofluorescin (DCFH) assay is commonly used to monitor free radical reactions, reactive oxygen species (ROS), or reactive nitrogen species (RNS). Upon oxidation the non-fluorescent DCFH is converted into the fluorescent compound dichlorofluorescein (DCF). In the present communication we show that the Cu⁺ reagent BCS strongly facilitated the oxidation of DCFH in the presence of Cu²⁺ or Cu⁺. In contrast, 2,2′-dipyridyl (DP), which is also a Cu⁺-complexing reagent, but not as well known and therefore not as commonly used as BCS, did not cause any oxidative modification of DCFH in the presence of Cu²⁺ or Cu⁺. We therefore recommend that DP should be used instead of BCS to complex Cu⁺ in reactions which are initiated by Cu²⁺ and when ROS/RNS are analyzed by the DCFH oxidation assay.     

Novel 1,8-naphthalimide dye for multichannel sensing of H<Superscript>+</Superscript> and Cu<Superscript>2+</Superscript>

A novel 1,8-naphthalimide dye with simple structure has been produced by a facile synthetic method for colorimetric and fluorescent sensing of H⁺ and Cu²⁺. In CH₃CN/H₂O (1/1, v/v), the dye could monitor H⁺ using dual channels (ratiometric absorbance and fluorescence intensity change) from pH 6.2 to 12.0. Meanwhile, in the pH range of 1.9–5.2, the dye could also be used to detect Cu²⁺ using triple channels [ultraviolet–visible (UV–Vis) absorption, fluorescence intensity reduction, as well as fluorescence blueshift]. The detection limits for Cu²⁺ evaluated by colorimetric and fluorescent titration were 6.10 × 10^?7 and 2.62 × 10^?7 M, respectively. The dye exhibited specific selectivity and sensitivity for H⁺ and Cu²⁺ over various coexisting metal ions. Moreover, the sensing mechanism of the dye for H⁺ and Cu²⁺ was carefully examined.     

CRISPR-Mediated Profiling of Viral RNA at Single-Nucleotide Resolution

Mass pathogen screening is critical to preventing the outbreaks and spread of infectious diseases. The large-scale epidemic of COVID-19 and the rapid mutation of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus have put forward new requirements for virus detection and identification techniques. Here, we report a CRISPR-based Amplification-free Viral RNA Electrical Detection platform (CAVRED) for the rapid detection and identification of SARS-CoV-2 variants. A series of CRISPR RNA assays were designed to amplify the CRISPR-Cas system‘s ability to discriminate between mutant and wild RNA genomes with a single-nucleotide difference. The identified viral RNA information was converted into readable electrical signals through field-effect transistor biosensors for the achievement of highly sensitive detection of single-base mutations. CAVRED can detect the SARS-CoV-2 virus genome as low as 1 cp μL⁻¹ within 20 mins without amplification, and this value is comparable to the detection limit of real-time quantitative polymerase chain reaction. Based on the excellent RNA mutation detection ability, an 8-in-1 CAVRED array was constructed and realized the rapid identification of 40 simulated throat swab samples of SARS-CoV-2 variants with a 95.0 % accuracy. The advantages of accuracy, sensitivity, and fast speed of CAVRED promise its application in rapid and large-scale epidemic screening.     

Photoelectrochemical biosensing platform for the SARS-CoV-2 spike and nucleocapsid proteins

The COVID-19 pandemic is still a continuing worldwide challenge for public health systems. Early and ultrasensitive identification of the infection is essential for preventing the spread of COVID-19 by pre-symptomatic or asymptomatic individuals, particularly in the community and in-home settings. This work presents a versatile photoelectrochemical (PEC) immunosensor for SARS-CoV-2 detection based on a composite material formed by bismuth vanadate (BiVO₄) and strontium titanate (SrTiO₃). The PEC platform was denoted as BiVO₄/SrTiO₃/FTO, and it can be tuned for the detection of either Spike (S) or Nucleocapsid (N) protein by simply altering the antibody immobilized on the platform's surface. Chemical, morphological, and electrochemical characterizations were performed by X-Ray Diffraction, Scanning Electron microscopy, Energy-dispersive X-ray spectroscopy, Electrochemical Impedance Spectroscopy, and Amperometry. With a simple sensing architecture of the PEC platform, it was possible to achieve a linear response range of 0.1 pg mL⁻¹ to 1000 ng mL⁻¹ for S protein and 0.01 pg mL⁻¹ to 1000 ng mL⁻¹ for N protein. The PEC immunosensors presented recovery values for the two SARS-CoV-2 proteins in artificial saliva samples between 97 % and 107.20 % suggesting a good accuracy for the proposed immunosensors.     

Das Gleichgewicht des Cu2+−Cu+−Cu-systems in konzentrierten Perchloratlösungen

The equilibrium of the reaction Cu²⁺+Cu?2 Cu⁺ has been investigated in cone. solutions of Ca(ClO₄)₂. The apparent equilibrium constants of this reaction and the formal potentials of the Cu²⁺/Cu⁺, Cu²⁺/Cu and Cu⁺/Cu redox systems were determined. From these data the hydration numbers of the Cu²⁺ and Cu⁺ ions were estimated and the scheme of the reaction studied was proposed and discussed. In addition the equilibrium constants of the reaction Cu²⁺+Cu(Hg)?2 Cu⁺ were calculated and discussed.     

An ultra-sensitive and colorimetric sensor for copper and iron based on glutathione-functionalized gold nanoclusters

Here, we report an ultra-sensitive and colorimetric sensor for the detection of Fe³⁺ or Cu²⁺ successively using glutathione-functionalized Au nanoclusters (GSH-AuNCs). For GSH-AuNCs can catalytically oxidize peroxidase substrates, such as 3, 3′, 5, 5′-tetramethylbenzidine (TMB), colored products are formed in the presence of H₂O₂. While upon the addition of Fe³⁺ or Cu²⁺ into the GSH-AuNCs-TMB-H₂O₂ system, diverse color and absorbance of the system was obtained due to the self oxidation of Fe³⁺ and the inhibition of peroxidase-like activity of GSH-AuNCs. With the introduction of ethylene diamine tetraacetic acid (EDTA) or ammonium fluoride (NH₄F) to GSH-AuNCs-TMB-H₂O₂+Cu²⁺ system or GSH-AuNCs-TMB-H₂O₂+Fe³⁺ system respectively, a restoration of color and absorbance of system was realized. On the basis of above phenomenon, a colorimetric and quantitative approach for detecting Fe³⁺ and Cu²⁺ was developed with detection limit of 1.25 × 10⁻⁹ M and 1.25 × 10⁻¹⁰ M respectively. Moreover, the concentration of Fe³⁺ and Cu²⁺ in human serums was also accurate quantified by this method. So this design strategy realized the simple and simultaneous detection of Fe³⁺ and Cu²⁺, suggesting significant potential in clinical diagnosis.     

Amperometric carbohydrate antigen 19-9 immunosensor based on three dimensional ordered macroporous magnetic Au film coupling direct electrochemistry of horseradish peroxidase

A sandwich-type electrochemical immunosensor for the detection of carbohydrate antigen 19-9 (CA 19-9) antigen based on the immobilization of primary antibody (Ab₁) on three dimensional ordered macroporous magnetic (3DOMM) electrode, and the direct electrochemistry of horseradish peroxidase (HRP) that was used as both the label of secondary antibody (Ab₂) and the blocking reagent. The 3DOMM electrode was fabricated by introducing core–shell Au–SiO₂@Fe₃O₄ nanospheres onto the surface of three dimensional ordered macroporous (3DOM) Au electrode via the application of an external magnet. Au nanoparticles functionalized SBA-15 (Au@SBA-15) was conjugated to the HRP labeled secondary antibody (HRP-Ab₂) through the Au–SH or Au–NH₃⁺ interaction, and HRP was also used as the block reagent. The formation of antigen–antibody complex made the combination of Au@SBA-15 and 3DOMM exhibit remarkable synergistic effects for accelerating direct electron transfer (DET) between HRP and the electrode. Under the optimal conditions, the DET current signal increased proportionally to CA 19-9 concentration in the range of 0.05 to 15.65 U mL⁻¹ with a detection limit of 0.01 U mL⁻¹. Moreover, the immunosensor showed high selectivity, good stability, satisfactory reproducibility and regeneration. Importantly, the developed method was used to assay clinical serum specimens, achieving a good relation with those obtained from the commercialized electrochemiluminescent method.     

A Dinuclear Ruthenium(II) Complex as a One‐ and Two‐Photon Luminescent Probe for Biological Cu2+ Detection

A new dinuclear Ru^II polypyridyl complex, [(bpy)₂Ru(H₂bpip)Ru(bpy)₂]⁴⁺ ( RuH₂bpip , bpy=2,2‐bipyridine, H₂bpip=2,6‐pyridyl(imidazo[4,5‐f][1,10]phenanthroline), was developed to act as a one‐ and two‐photon luminescent probe for biological Cu²⁺ detection. This Ru^II complex shows a significant two‐photon absorption cross section (400 GM) and displays a remarkable one‐ and two‐photon luminescence switch in the presence of Cu²⁺ ions. Importantly, RuH₂bpip can selectively recognise Cu²⁺ in aqueous media in the presence of other abundant cellular cations (such as Na⁺, K⁺, Mg²⁺, and Ca²⁺), trace metal ions in organisms (such as Zn²⁺, Ag⁺, Fe³⁺, Fe²⁺, Ni²⁺, Mn²⁺, and Co²⁺), prevalent toxic metal ions in the environment (such as Cd²⁺, Hg²⁺, and Cr³⁺), and amino acids, with high sensitivity (detection limit≤3.33×10^?8 M ) and a rapid response time (≤15 s). The biological applications of RuH₂bpip were also evaluated and it was found to exhibit low cytotoxicity, good water solubility, and membrane permeability; RuH₂bpip was, therefore, employed as a sensing probe for the detection of Cu²⁺ in living cells and zebrafish.     

A novel lipid droplets-targeting fluorescent probe based on dicyanisophorone and carbazole for Cu2+ and its application

A novel fluorescent probe, LCH , based on dicyanisophorone and carbazole, was prepared for the visual detection of Cu²⁺. The probe LCH could recognize Cu²⁺ by fluorescence quenching in EtOH/H₂O (1/4, v/v) solution, which could be easily identified under the 365 nm UV lamp, and the detection limit was as low as 0.785 μM. The recognition mechanism of probe LCH with Cu²⁺ was determined by combining ¹H NMR titration, MS, and theoretical calculations. Practical application experiments showed that probe LCH could be used to detect Cu²⁺ in the test strip experiments. Cell imaging experiments showed that the probe LCH owned good cell permeability and could be applied to the imaging of Cu²⁺ in HepG2 cells. In addition, fluorescence colocalization experiments showed that LCH could target lipid droplets. These results indicate that the probe LCH will have a good application prospect in environmental detection and clinical medicine.     

Evaluation of the Antioxidant and Antiradical Properties of Some Phyto and Mammalian Lignans

In this study, the antioxidant and antiradical properties of some phyto lignans (nordihydroguaiaretic acid, secoisolariciresinol, secoisolariciresinol diglycoside, and α-(-)-conidendrin) and mammalian lignans (enterodiol and enterolactone) were examined by different antioxidant assays. For this purpose, radical scavenging activities of phyto and mammalian lignans were realized by 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) radical (ABTS^•+) scavenging assay and 1,1-diphenyl-2-picrylhydrazyl radical (DPPH) scavenging assay. Additionally, the reducing ability of phyto and mammalian lignans were evaluated by cupric ions (Cu²⁺) reducing (CUPRAC) ability, and ferric ions (Fe³⁺) and [Fe³⁺-(TPTZ)2]³⁺ complex reducing (FRAP) abilities. Also, half maximal inhibitory concentration (IC₅₀) values were determined and reported for DPPH^• and ABTS^•+ scavenging influences of all of the lignan molecules. The absorbances of the lignans were found in the range of 0.150–2.320 for Fe³⁺ reducing, in the range of 0.040–2.090 for Cu²⁺ reducing, and in the range of 0.360–1.810 for the FRAP assay. On the other hand, the IC₅₀ values of phyto and mammalian lignans were determined in the ranges of 6.601–932.167 µg/mL for DPPH^• scavenging and 13.007–27.829 µg/mL for ABTS^•+ scavenging. In all of the used bioanalytical methods, phyto lignans, as secondary metabolites in plants, demonstrated considerably higher antioxidant activity compared to that of mammalian lignans. In addition, it was observed that enterodiol and enterolactone exhibited relatively weaker antioxidant activities when compared to phyto lignans or standard antioxidants, including butylated hydroxytoluene (BHT), butylated hydroxyanisole (BHA), Trolox, and α-tocopherol.     

Highly selective and sensitive paper-based colorimetric sensor using thiosulfate catalytic etching of silver nanoplates for trace determination of copper ions

A novel, highly selective and sensitive paper-based colorimetric sensor for trace determination of copper (Cu²⁺) ions was developed. The measurement is based on the catalytic etching of silver nanoplates (AgNPls) by thiosulfate (S₂O₃²⁻). Upon the addition of Cu²⁺ to the ammonium buffer at pH 11, the absorption peak intensity of AuNPls/S₂O₃²⁻ at 522 nm decreased and the pinkish violet AuNPls became clear in color as visible to the naked eye. This assay provides highly sensitive and selective detection of Cu²⁺ over other metal ions (K⁺, Cr³⁺, Cd²⁺, Zn²⁺, As³⁺, Mn²⁺, Co²⁺, Pb²⁺, Al³⁺, Ni²⁺, Fe³⁺, Mg²⁺, Hg²⁺ and Bi³⁺). A paper-based colorimetric sensor was then developed for the simple and rapid determination of Cu²⁺ using the catalytic etching of AgNPls. Under optimized conditions, the modified AgNPls coated at the test zone of the devices immediately changes in color in the presence of Cu²⁺. The limit of detection (LOD) was found to be 1.0 ng mL⁻¹ by visual detection. For semi-quantitative measurement with image processing, the method detected Cu²⁺ in the range of 0.5–200 ng mL⁻¹(R² = 0.9974) with an LOD of 0.3 ng mL⁻¹. The proposed method was successfully applied to detect Cu²⁺ in the wide range of real samples including water, food, and blood. The results were in good agreement according to a paired t-test with results from inductively coupled plasma-optical emission spectrometry (ICP-OES).     

Oxidation of Ethanol in Cu-Faujasites Studied by IR Spectroscopy

In this study, IR studies of the coadsorption of ethanol and CO on Cu⁺ cations evidenced the transfer of electrons from ethanol to Cu⁺, which caused the lowering of the frequency of the band attributed to CO bonded to the same Cu⁺ cation due to the more effective π back donation of d electrons of Cu to antibonding π* orbitals of CO. The reaction of ethanol with acid sites in zeolite HFAU above 370 K produced water and ethane, polymerizing to polyethylene. Ethanol adsorbed on zeolite Cu(2)HFAU containing acid sites and Cu⁺_exch also produced ethene, but in this case, the ethene was bonded to Cu⁺ and did not polymerize. C=C stretching, which is IR non-active in the free ethene molecule, became IR active, and a weak IR band at 1538 cm⁻¹ was present. The reaction of ethanol above 370 K in Cu(5)NaFAU zeolite (containing small amounts of Cu⁺_exch and bigger amounts of Cu⁺_ox, Cu²⁺_exch and CuO) produced acetaldehyde, which was further oxidized to the acetate species (CH₃COO⁻). As oxygen was not supplied, the donors of oxygen were the Cu species present in our zeolite. The CO and NO adsorption experiments performed in Cu-zeolite before and after ethanol reaction evidenced that both Cu⁺_ox and Cu²⁺ (Cu²⁺_exch and CuO) were consumed by the ethanol oxidation reaction. The studies of the considered reaction of bulk CuO and Cu₂O as well as zeolites, in which the contribution of Cu⁺_ox species was reduced by various treatments, suggest that ethanol was oxidized to acetaldehyde by Cu²⁺_ox (the role of Cu⁺_ox could not be elucidated), but Cu⁺_ox was the oxygen donor in the acetate formation.     

Approach to De-NOx-ing photocatalysis. II excited state of copper ions supported on silica and photocatalytic activity for no decomposition

Cu²⁺ ions supported on SiO₂ (Cm²⁺ /SiO₂) prepared by an ion-exchange method are reduced to Cu⁺ when Cu²⁺/SiO₂ samples are evacuated at temperatures higher than 573 K Reduced Cu²⁺ ions on SiO₂ (Cu⁺/SiO₂ catalyst) decomposes NO molecules photocatalytically and stoichiometrically into N₂ and O₂ at 275 K. The physicochemical and photochemical properties of copper ions anchored onto SiO₂ have been investigated by means of ESR and dynamic photoluminescence spectroscopies, as well as the analysis of photoreaction products. These results indicate that the excited state of the copper ions (Cu⁺ species) plays a significant role in the photocatalytic decomposition of NO molecules and the photoreaction involves an electron transfer from the excited state of the Cu⁺ ion into an anti-bonding π orbital of NO molecule within the lifetime of its excited state. Thus, the present results obtained with the Cu⁺/SiO₂ catalysts imply the possibility of their utilization as a potentially promising type of photocatalysts in gas-solid systems.     

Naked-eye detection of Cu (II) and Fe (III) based on a Schiff Base Ruthenium complex with nicotinohydrazide

A cyclometalated ruthenium (II) complex 1 [(Ru (Phen)₂(Pbznh)]⁺ PF₆⁻ (Phen = 1,10-phenanthroline and Pbznh = N-(4-(pyridine-2-yl)benzylidene) nicotinohydrazide) with nicotinohydrazide as a functional group was synthesized and characterized. Changes of its absorption spectra and color induced by Cu²⁺ and Fe³⁺ were systematic investigated. The results demonstrated that complex 1 could be served as a colorimetric probe to fast, selective and sensitive detection of Cu²⁺ and Fe³⁺ both in acetonitrile and filter paper based strips. Upon addition of Cu²⁺ and Fe³⁺ to solution of probe 1 , solution color changed from pink to colorless and light yellow respectively, and their corresponding detection limit were calculated to be 3.26 × 10⁻⁸ M and 3.12 × 10⁻⁷ M. Moreover, color of test papers with 1 changed from pink to colorless/yellow when Cu²⁺/Fe³⁺ were dropwise added. Therefore, it can be used as a desirable ‘naked-eye’ indicator candidate for Cu²⁺ and Fe³⁺.