An approximation algorithm for square packing

We consider the problem of packing squares into bins which are unit squares, where the goal is to minimize the number of bins used. We present an algorithm for this problem with an absolute worst-case ratio of 2, which is optimal provided P≠NP.     

A 17/10-approximation algorithm fork-bounded space on-line variable-sized bin packing

A version of thek-bounded space on-line bin packing problem, where a fixed collection of bin sizes is allowed, is considered. By packing large items into appropriate bins and closing appropriate bins, we can derive an algorithm with worst-case performance bound 1.7 fork≥3. This research is supported by the Science Foundation under State Education Committee of China. The earlier version was done in Institute of Applied Mathematics, Academia Sinica.     

带冲突关系装箱问题的启发式求解算法

现实物流活动中大量存在的食品、药品和危险品等货物的分组包装问题属于带冲突关系的装箱问题(BPPC),其优化目标是在满足货物间冲突限制的前提下完成装箱操作,并最小化使用货箱的数量。本文从实际需求出发,基于货物之间的冲突关系、装箱顺序和货箱容量等约束建立相应的数学规划模型;随后设计了求解BPPC问题的启发式算法,算法通过迭代求解最大团结构实现货物间冲突关系的消去,根据当前货物最大团采用改进降序首次适应算法(FFD)完成货物装箱操作,并通过“洗牌”策略对已有装箱方案进行局部优化;最后,针对Iori算例数据,将以上算法与基于图着色的启发式算法进行比较分析,结果表明,本文算法是求解BPPC问题更为有效的方法。     

Bin packing: On optimizing the number of pieces packed

We consider bin-packing variations related to the well-studied problem of maximizing the total number of pieces packed into a fixed set of bins. We show that, when the objective is to minimize the total number of pieces packed subject to the constraint that no unpacked piece will fit, no polynomial-time relative approximation algorithm exists (unless, of course,P=NP). That is, we prove that it isNP-hard to guarantee packing no more than a constant multiple of the optimal number of pieces, for any constant. This appears to be the first bin-packing problem for which this property has been demonstrated. Furthermore, this result also holds for the allied packing variant which seeks to minimize the maximum number of pieces packed in any single bin. We find the situation to be markedly better for the problem of maximizing the minimum number of pieces in any bin. If all bins possess the same capacity, we prove that the familiar SPF rule is an absolute approximation algorithm with additive constant 1, and can therefore be regarded as a best possible heuristic. For the more general and difficult case in which bin capacities may differ, it turns out that SPF fails to qualify as even a relative approximation algorithm. However, we devise an implementation of the well-known FFD heuristic, which we show to be a relative approximation algorithm, yielding a worst-case performance ratio of 1/2 with additive constant 0. Moreover, we prove that (unlessP=NP) no polynomial-time algorithm can guarantee a higher ratio without sacrificing the additive constant.This author's research is supported in part by the National Science Foundation under grants ECS-8403859 and MIP-8603879.     

New classes of fast lower bounds for bin packing problems

The bin packing problem is one of the classical NP-hard optimization problems. In this paper, we present a simple generic approach for obtaining new fast lower bounds, based on dual feasible functions. Worst-case analysis as well as computational results show that one of our classes clearly outperforms the previous best “economical” lower bound for the bin packing problem by Martello and Toth, which can be understood as a special case. In particular, we prove an asymptotic worst-case performance of 3/4 for a bound that can be computed in linear time for items sorted by size. In addition, our approach provides a general framework for establishing new bounds. Received: August 11, 1998 / Accepted: February 1, 2001?Published online September 17, 2001     

Two-stage open shop scheduling with a bottleneck machine

It is known that for the open shop scheduling problem to minimize the makespan there exists no polynomial-time heuristic algorithm that guarantees a worst-case performance ratio better than 5/4, unless P≠NP. However, this result holds only if the instance of the problem contains jobs consisting of at least three operations. This paper considers the open shop scheduling problem, provided that each job consists of at most two operations, one of which is to be processed on one of the m⩾2 machines, while the other operation must be performed on the bottleneck machine, the same for all jobs. For this NP-hard problem we present a heuristic algorithm and show that its worst-case performance ratio is 5/4.     

THE FFD ALGORITHM FOR THE BIN PACKING PROBLEM WITH KERNEL ITEMS

The FFD algorithm is one of the most famous algorithms for the classical bin packing problem. In this paper,some versions of the FFD algorithm are considered in several bin packing problems. Especially,two of them applied to the bin packing problem with kernel items are analyzed. Tight worst-case performance ratios are obtained.     

Resource augmented semi-online bounded space bin packing

We study on-line bounded space bin-packing in the resource augmentation model of competitive analysis. In this model, the on-line bounded space packing algorithm has to pack a list L of items with sizes in (0, 1], into a minimum number of bins of size b, b≥1. A bounded space algorithm has the property that it only has a constant number of active bins available to accept items at any point during processing. The performance of the algorithm is measured by comparing the produced packing with an optimal offline packing of the list L into bins of size 1. The competitive ratio then becomes a function of the on-line bin size b. Csirik and Woeginger studied this problem in [J. Csirik, G.J. Woeginger, Resource augmentation for online bounded space bin packing, Journal of Algorithms 44(2) (2002) 308-320] and proved that no on-line bounded space algorithm can perform better than a certain bound ρ(b) in the worst case. We relax the on-line condition by allowing a complete repacking within the active bins, and show that the same lower bound holds for this problem as well, and repacking may only allow one to obtain the exact best possible competitive ratio of ρ(b) having a constant number of active bins, instead of achieving this bound in the limit. We design a polynomial time on-line algorithm that uses three active bins and achieves the exact best possible competitive ratio ρ(b) for the given problem.     

Flow-shop scheduling with a learning effect

The paper is devoted to some flow-shop scheduling problems with a learning effect. The objective is to minimize one of the two regular performance criteria, namely, makespan and total flowtime. A heuristic algorithm with worst-case bound m for each criteria is given, where m is the number of machines. Furthermore, a polynomial algorithm is proposed for both of the special cases: identical processing time on each machine and an increasing series of dominating machines. An example is also constructed to show that the classical Johnson's rule is not the optimal solution for the two-machine flow-shop scheduling to minimize makespan with a learning effect. Some extensions of the problem are also shown.     

Dynamic multi-dimensional bin packing

A natural generalization of the classical online bin packing problem is the dynamic bin packing problem introduced by Coffman et al. (1983) [7]. In this formulation, items arrive and depart and the objective is to minimize the maximal number of bins ever used over all times. We study the oriented multi-dimensional dynamic bin packing problem for two dimensions, three dimensions and multiple dimensions. Specifically, we consider dynamic packing of squares and rectangles into unit squares and dynamic packing of three-dimensional cubes and boxes into unit cubes. We also study dynamic d-dimensional hypercube and hyperbox packing. For dynamic d-dimensional box packing we define and analyze the algorithm NFDH for the offline problem and present a dynamic version. This algorithm was studied before for rectangle packing and for square packing and was generalized only for multi-dimensional cubes. We present upper and lower bounds for each of these cases.     

A note on the minimum bounded edge-partition of a tree

Minimum bounded edge-partition divides the edge set of a tree into the minimum number of disjoint connected components given a maximum weight for any component. It is an adaptation of the uniform edge-partition of a tree. An optimization algorithm is developed for this NP-hard problem, based on repeated bin packing of inter-related instances. The algorithm has linear running time for the class of ‘balanced trees’ common for the stochastic programming application which motivated investigation of this problem.Fast 2-approximation algorithms are formed for general instances by replacing the optimal bin packing with almost any bin packing heuristic. The asymptotic worst-case ratio of these approximation algorithms is never better than the absolute worst-case ratio of the bin packing heuristic used.     

A 3-approximation algorithm for two-dimensional bin packing

In the classical two-dimensional bin packing problem one is asked to pack a set of rectangular items, without overlap and without any rotation, into the minimum number of identical square bins. We give an approximation algorithm with absolute worst-case ratio of 3.     

Single-machine scheduling with deteriorating jobs and learning effects to minimize the makespan

This paper studies the single-machine scheduling problem with deteriorating jobs and learning considerations. The objective is to minimize the makespan. We first show that the schedule produced by the largest growth rate rule is unbounded for our model, although it is an optimal solution for the scheduling problem with deteriorating jobs and no learning. We then consider three special cases of the problem, each corresponding to a specific practical scheduling scenario. Based on the derived optimal properties, we develop an optimal algorithm for each of these cases. Finally, we consider a relaxed model of the second special case, and present a heuristic and analyze its worst-case performance bound.     

New lower bounds for the three-dimensional orthogonal bin packing problem

In this paper, we consider the three-dimensional orthogonal bin packing problem, which is a generalization of the well-known bin packing problem. We present new lower bounds for the problem from a combinatorial point of view and demonstrate that they theoretically dominate all previous results from the literature. The comparison is also done concerning asymptotic worst-case performance ratios. The new lower bounds can be more efficiently computed in polynomial time. In addition, we study the non-oriented model, which allows items to be rotated.     

Scheduling jobs with release dates on parallel batch processing machines to minimize the makespan

Batch processing happens in many different industries, in which a number of jobs are processed simultaneously as a batch. In this paper we develop two heuristics for the problem of scheduling jobs with release dates on parallel batch processing machines to minimize the makespan and analyze their worst-case performance ratios. We also present a polynomial-time optimal algorithm for a special case of the problem where the jobs have equal processing times.     

超尺寸物品装箱问题

本文给出一类新的装箱问题，超尺寸物品装箱问题。就实际解决该问题所普遍彩的两步法，证明了当采用经典目标函数并且拆分次数不超过2时，第二步采用FFDLR的渐进最坏比为3/2。进而针对超尺寸物品装箱问题的算法提出了一个评价效率更高的目标函数。证明了在此目标函数下，当不限制物品的最大尺寸时，第二步采用最优装法两步法的渐近最坏比为2。最后，给出渐近最坏与拆分次数的关系。     

Reoptimizing the 0-1 knapsack problem

In this paper we study the problem where an optimal solution of a knapsack problem on n items is known and a very small number k of new items arrive. The objective is to find an optimal solution of the knapsack problem with n+k items, given an optimal solution on the n items (reoptimization of the knapsack problem). We show that this problem, even in the case k=1, is NP-hard and that, in order to have effective heuristics, it is necessary to consider not only the items included in the previously optimal solution and the new items, but also the discarded items. Then, we design a general algorithm that makes use, for the solution of a subproblem, of an α-approximation algorithm known for the knapsack problem. We prove that this algorithm has a worst-case performance bound of , which is always greater than α, and therefore that this algorithm always outperforms the corresponding α-approximation algorithm applied from scratch on the n+k items. We show that this bound is tight when the classical Ext-Greedy algorithm and the algorithm are used to solve the subproblem. We also show that there exist classes of instances on which the running time of the reoptimization algorithm is smaller than the running time of an equivalent PTAS and FPTAS.     

A hybrid two-stage transportation and batch scheduling problem

We study the coordinated scheduling problem of hybrid batch production on a single batching machine and two-stage transportation connecting the production, where there is a crane available in the first-stage transportation that transports jobs from the warehouse to the machine and there is a vehicle available in the second-stage transportation to deliver jobs from the machine to the customer. As the job to be carried out is big and heavy in the steel industry, it is reasonable assumed that both the crane and the vehicle have unit capacity. The batching machine processes a batch of jobs simultaneously. Each batch occur a setup cost. The objective is to minimize the sum of the makespan and the total setup cost. We prove that this problem is strongly NP-hard. A polynomial time algorithm is proposed for a case where the job transportation times are identical on the crane or the vehicle. An efficient heuristic algorithm for the general problem is constructed and its tight worst-case bound is analyzed. In order to further verify the performance of the proposed heuristics, we develop a lower bound on the optimal objective function. Computational experiments show that the heuristic algorithm performs well on randomly generated problem instances.     

Open shop scheduling problem to minimize makespan with release dates

The scheduling problem of open shop to minimize makespan with release dates is investigated in this paper. Unlike the usual researches to confirm the conjecture that the tight worst-case performance ratio of the Dense Schedule (DS) is 2 − 1/m, where m is the number of machines, the asymptotic optimality of the DS is proven when the problem scale tends to infinity. Furthermore, an on-line heuristic based on DS, Dynamic Shortest Processing Time-Dense Schedule, is presented to deal with the off-line and on-line versions of this problem. At the end of the paper, an asymptotically optimal lower bound is provided and the results of numerical experiments show the effectiveness of the heuristic.     

带核箱覆盖问题的在线算法

经典的箱覆盖问题是组合优化中一个著名的问题,并且得到了广泛的研究．本文主要讨论带核元的箱覆盖问题的复杂性和在线条件下的算法．指出了带核的箱覆盖问题是强ＮＰ－ｈａｒｄ的．给出了在不同的在线条件下可行算法渐近比的上界,指出仅在条件三下才存在渐近比好于０的在线算法,并给出了在此条件下一个渐近比为１／２的最好的在线算法。