Thermodynamic evaluation and optimization of the (NaCl + KCl + MgCl2 + CaCl2 + MnCl2 + FeCl2 + CoCl2 + NiCl2) system

A complete critical evaluation of all available phase diagram and thermodynamic data has been performed for all condensed phases of the (NaCl + KCl + MgCl₂ + CaCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) system, and optimized model parameters have been found. The (MgCl₂ + CaCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) subsystem has been critically evaluated in a previous article. The model parameters obtained for the binary subsystems can be used to predict thermodynamic properties and phase equilibria for the multicomponent system. The Modified Quasichemical Model was used for the molten salt phase, and the (MgCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) solid solution was modeled using a cationic substitutional model with an ideal entropy and an excess Gibbs free energy expressed as a polynomial in the component mole fractions. Finally, the (Na,K)(Mg,Ca,Mn,Fe,Co,Ni)Cl₃ and the (Na,K)₂(Mg,Mn,Fe,Co,Ni)Cl₄ solid solutions were modeled using the Compound Energy Formalism.     

Thermodynamic evaluation and optimization of the (LiF + NaF + KF + MgF2 + CaF2 + SrF2) system

A complete critical evaluation of all available phase diagram and thermodynamic data has been performed for all condensed phases of the (LiF + NaF + KF + MgF₂ + CaF₂ + SrF₂) system, and optimized model parameters have been found. The (LiF + NaF + KF + MgF₂ + CaF₂) subsystem has been critically evaluated in a previous article. The model parameters obtained for the binary and ternary subsystems can be used to predict thermodynamic properties and phase equilibria for the multicomponent system. The Modified Quasichemical Model for short-range ordering was used for the molten salt phase, and the low-temperature and high-temperature (CaF₂ + SrF₂) solid solutions were modelled using a cationic substitutional model with an ideal entropy and an excess Gibbs free energy expressed as a polynomial in the component mole fractions. Finally, the (Li, Na, K)(Mg, Ca, Sr)F₃ perovskite phase was modelled using the Compound Energy Formalism.     

Thermodynamic evaluation and optimization of the (MgCl2 + CaCl2 + MnCl2 + FeCl2 + CoCl2 + NiCl2) system

A complete critical evaluation of all available phase diagram and thermodynamic data has been performed for all condensed phases of the (MgCl₂ + CaCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) system, and optimized model parameters have been found. The model parameters obtained for the binary subsystems can be used to predict thermodynamic properties and phase equilibria for the multicomponent system. The Modified Quasichemical Model was used for the molten salt phase, and the (MgCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) solid solution was modeled using a cationic substitutional model with an ideal entropy and an excess Gibbs free energy expressed as a polynomial in the component mole fractions. This is the first of two articles on the optimization of the (NaCl + KCl + MgCl₂ + CaCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) system.     

Phase equilibria for H2 + CO2 + H2O system containing gas hydrates

Isothermal phase equilibrium (pressure–composition in the gas phase) for the ternary system of H₂ + CO₂ + H₂O has been investigated in the presence of gas hydrate phase. Three-phase equilibrium pressure increases with the H₂ composition of gas phase. The Raman spectra suggest that H₂ is not enclathrated in the hydrate-cages and behaves only like the diluent gas toward the formation of CO₂ hydrate. This fact is also supported by the thermodynamic analysis using Soave–Redlich–Kwong equation of state.     

(Liquid + liquid) equilibria of (sulfolane + benzene + n-hexane), (N-formylmorpholine + benzene + n-hexane), and (sulfolane + N-formylmorpholine + benzene + n-hexane) at temperatures ranging from (298.15 to 318.15) K: Experimental results and correlation

The experimental (liquid + liquid) equilibrium (LLE) properties for two ternary systems containing (N-formylmorpholine + benzene + n-hexane), (sulfolane + benzene + n-hexane) and a quaternary mixed solvent system (sulfolane + N-formylmorpholine + benzene + n-hexane) were measured at temperature ranging from (298.15 to 318.15) K and at an atmospheric pressure. The experimental distribution coefficients and selectivity factors are presented to evaluate the efficiency of the solvents for extraction of benzene from n-hexane. The LLE results obtained indicate that increasing temperature decreases selectivity for all solvents. The LLE results for the systems studied were used to obtain binary interaction parameters in the UNIQUAC model by minimizing the root mean square deviations (RMSD) between the experimental and calculated results. Using the interaction parameters obtained, the phase equilibria in the systems were calculated and plotted. The calculated compositions based on the UNIQUAC model were found to be in good agreement with the experimental values. The result of the RMSD obtained by comparing the calculated and experimental two-phase compositions is 0.0163 for (N-formylmorpholine + benzene + n-hexane) system and is 0.0120 for (sulfolane + benzene + n-hexane) system.     

Thermodynamic evaluation and optimization of the (NaF + AlF3 + CaF2 + BeF2 + Al2O3 + BeO) system

A complete critical evaluation of all available phase diagram and thermodynamic data has been performed for all condensed phases and relevant gaseous species of the (NaF + AlF₃ + CaF₂ + BeF₂ + Al₂O₃ + BeO) system, and optimized model parameters have been found. The (NaF + AlF₃ + CaF₂ + Al₂O₃) subsystem, which is the base electrolyte used for the electro-reduction of alumina in Hall–Héroult cells, has been critically evaluated in a previous article. The Modified Quasichemical Model in the Quadruplet Approximation for short-range ordering was used for the molten salt phase. The thermodynamic database developed is a first step towards a quantitative study of the beryllium mass balance in an electrolysis cell. In particular, the predominant Be-containing species in the gas phase evolved at the anode were identified; and, for a given beryllium content of the alumina, the beryllium content of the electrolytic bath at steady state was assessed under several approximations.     

(Liquid + liquid) equilibria of three ternary systems: (heptane + benzene + N-formylmorpholine), (heptane + toluene + N-formylmorpholine), (heptane + xylene + N-formylmorpholine) from T = (298.15 to 353.15) K

(Liquid + liquid) equilibrium (LLE) data for ternary systems: (heptane + benzene + N-formylmorpholine), (heptane + toluene + N-formylmorpholine), and (heptane + xylene + N-formylmorpholine) have been determined experimentally at temperatures ranging from 298.15 K to 353.15 K. Complete phase diagrams were obtained by determining solubility and tie-line data. Tie-line compositions were correlated by Othmer–Tobias and Bachman methods. The universal quasichemical activity coefficient (UNIQUAC) and the non-random two liquids equation (NRTL) were used to predict the phase equilibrium in the system using the interaction parameters determined from experimental data. It is found that UNIQUAC and NRTL used for LLE could provide a good correlation. Distribution coefficients, separation factors, and selectivity were evaluated for the immiscibility region.     

Dispersion energy in rare gas dimers from an ab initio perturbative procedure: Ne + Ne,Ar + Ar

The dispersion energy between two neon and two argon atoms is computed from an ab initio perturbative procedure not based on the multipole expansion. A comparison with the multipole expansion provides C₆ = 5.36 for Ne and 76.6 for Ar. It is seen that one d polarization function provides the main part of the C₆R^?6 contribution, the exponent of this function probably being related to the polarizability of the molecule. The multipole expansion seems acceptable up to the van der Waals minimum but quite invalid for smaller distances, and doubtful at the van der Waals minimum itself.     

Thermodynamic evaluation and optimization of the (NaCl + KCl + MgCl2 + CaCl2 + ZnCl2) system

A complete critical evaluation of all available phase diagram and thermodynamic data has been performed for all condensed phases and relevant gaseous species of the (NaCl + KCl + MgCl₂ + CaCl₂ + ZnCl₂) system, and optimized model parameters have been found. The (NaCl + KCl + MgCl₂ + CaCl₂) subsystem has been critically evaluated in a previous article. The model parameters obtained for the binary and ternary subsystems can be used to predict thermodynamic properties and phase equilibria for the multicomponent system. The Modified Quasichemical Model for short-range ordering was used for the molten salt phase.     

Quaternary isobaric (vapor + liquid + liquid) equilibrium and (vapor + liquid) equilibrium for the system (water + ethanol + cyclohexane + heptane) at 101.3 kPa

Experimental isobaric (vapor + liquid + liquid) and (vapor + liquid) equilibrium data for the ternary system {water (1) + cyclohexane (2) + heptane (3)} and the quaternary system {water (1) + ethanol (2) + cyclohexane (3) + heptane (4)} were measured at 101.3 kPa. An all-glass, dynamic recirculating still equipped with an ultrasonic homogenizer was used to determine the VLLE. The results obtained show that the system does not present quaternary azeotropes. The point-by-point method by Wisniak for testing the thermodynamic consistency of isobaric measurements was used to test the equilibrium data.     

Thermodynamic properties of (tetradecane + benzene, + toluene, + chlorobenzene, + bromobenzene, + anisole) binary mixtures at T = (298.15, 303.15, and 308.15) K

Density ρ, viscosity η, and refractive index n_D, values for (tetradecane + benzene, + toluene, + chlorobenzene, + bromobenzene, + anisole) binary mixtures over the entire range of mole fraction have been measured at temperatures (298.15, 303.15, and 308.15) K at atmospheric pressure. The speed of sound u has been measured at T = 298.15 K only. Using these data, excess molar volume V^E, deviations in viscosity Δη, Lorentz–Lorenz molar refraction ΔR, speed of sound Δu, and isentropic compressibility Δk_s have been calculated. These results have been fitted to the Redlich and Kister polynomial equation to estimate the binary interaction parameters and standard deviations. Excess molar volumes have exhibited both positive and negative trends in many mixtures, depending upon the nature of the second component of the mixture. For the (tetradecane + chlorobenzene) binary mixture, an incipient inversion has been observed. Calculated thermodynamic quantities have been discussed in terms of intermolecular interactions between mixing components.     

Thermodynamic evaluation and optimization of the (NaCl + Na2SO4 + Na2CO3 + KCl + K2SO4 + K2CO3) system

A complete, critical evaluation of all phase diagrams and thermodynamic data was performed for all condensed phases of the (NaCl + Na₂SO₄ + Na₂CO₃ + KCl + K₂SO₄ + K₂CO₃) system, and optimized parameters for the thermodynamic solution models were obtained. The Modified Quasichemical Model in the Quadruplet Approximation was used for modelling the liquid phase. The model evaluates first- and second-nearest-neighbour short-range order, where the cations (Na⁺ and K⁺) were assumed to mix on a cationic sublattice, while anions $({\text{CO}}_3^{2-}\text{,}{\text{SO}}_4^{2-}\text{,}\text{and}{\text{Cl}}^{-})$ were assumed to mix on an anionic sublattice. The thermodynamic properties of the solid solutions of (Na,K)₂(SO₄,CO₃) were modelled using the Compound Energy Formalism, and (Na,K)Cl was modelled using a substitutional model in previous studies. Phase transitions in the common-cation ternary systems (NaCl + Na₂SO₄ + Na₂CO₃) and (KCl + K₂SO₄ + K₂CO₃) were studied experimentally using d.s.c./t.g.a. The experimental results were used as input for evaluating the phase equilibrium in the common-cation ternary systems. The models can be used to predict the thermodynamic properties and phase equilibria in multicomponent heterogeneous systems. The experimental data from the literature are reproduced within experimental error limits.     

Thermodynamic evaluation and optimization of the (Ca + C + O + S) system

A critical evaluation of all available thermodynamic and (solid + liquid) phase equilibrium data for the (Ca + C + O + S) system has been performed. The liquid phase was modelled using the Modified Quasichemical Model in the pair approximation. The present database reproduces the (solid + liquid) equilibria of the experimentally studied subsystems of the (Ca + C + O + S) system within the experimental error limits. Estimations of the phase equilibria of systems lacking experimental data were made. The database of thermodynamic data for all phases can be used, along with other databases and Gibbs free energy minimization software, to calculate the phase equilibria and all thermodynamic properties of (Ca + C + O + S) mixtures, which are of great importance for several industrially relevant processes.     

Coexistence curves of critical nonaqueous microemulsions of (AOT + DMA + nonane) and (AOT + DMA + octane)

The coexistence curves of (T, n), (T, ϕ) and (T, ψ) (n, ϕ, ψ are the refractive index, the volume fraction, and the effective volume fraction, respectively) for two ternary nonaqueous microemulsion systems have been determined at constant pressure and a constant molar ratio ω of DMA to AOT. The critical exponent β and the critical amplitude B have been deduced, and the values of β were consistent with the theory of 3D-Ising in a region sufficiently close to the critical temperature. The results show that the coexistence curves have been successfully described by the Wegner equation and the expression for the diameter.     

(Liquid + liquid) equilibrium of (water + 2-propanol + 1-butanol + salt) systems at T = 313.15 K and T = 353.15 K: Experimental data and correlation

(Liquid + liquid) equilibrium data for the quaternary systems (water + 2-propanol + 1-butanol + potassium bromide) and (water + 2-propanol + 1-butanol + magnesium chloride) were measured at T = 313.15 K and T = 353.15 K. The overall salt concentrations were 5 and 10 mass percent. Ternary (liquid + liquid) equilibrium data for the salt-free system (water + 2-propanol + 1-butanol) were also determined and found to be in good agreement with data from the literature. The NRTL model for the activity coefficient was used to correlate the data. New interaction parameters were estimated, using the Simplex minimization method and a concentration-based objective function. The results are very satisfactory, with root mean square deviations between experimental and calculated compositions of both phases being less than 0.5%.     

(Liquid + liquid) equilibria of the (water + propionic acid + Aliquat 336 + organic solvents) at T = 298.15 K

In this work, trioctyl methyl ammonium chloride (Aliquat 336) was studied for its ability to extract propionic acid at various amine concentrations. The extraction of propionic acid with Aliquat 336 dissolved in five single solvents (cyclohexane, hexane, toluene, methyl isobutyl ketone, and ethyl acetate ) and binary solvents (hexane + MIBK, hexane + toluene, and MIBK + toluene) was investigated under various experimental conditions. The loading factors Z, extraction efficiency E and overall particular distribution coefficients were determined. All measurements were carried out at T = 298.15 K. The obtained results and the observed phenomena were discussed by taking into consideration the mechanism of extraction and the concentration of the interaction product in the aqueous phase.     

Liquid–liquid equilibria for pseudo-ternary systems: (Sulfolane + 2-ethoxyethanol) + octane + toluene at 293.15 K

Liquid–liquid equilibrium data, both binodal and tie lines are presented for the pseudo-ternary systems: {(sulfolane + 2-ethoxyethano) (1) + octane (2) + toluene (3)} at 293.15 K. The experimental liquid–liquid equilibrium data have been correlated using NRTL and UNIQUAC models, and the binary interaction parameters of these components have been presented. The correlated tie lines have been compared with the experimental data. The comparisons indicate that both NRTL and UNIQUAC models satisfactorily correlated the equilibrium compositions. The tie-line data of the studied systems also were correlated using the Hand method.     

Hydrate phase equilibrium and structure for (methane + ethane + tetrahydrofuran + water) system

The separation of methane and ethane through forming hydrate is a possible choice in natural gas, oil processing, or ethylene producing. The hydrate formation conditions of five groups of (methane + ethane) binary gas mixtures in the presence of 0.06 mole fraction tetrahydrofuran (THF) in water were obtained at temperatures ranging from (277.7 to 288.2) K. In most cases, the presence of THF in water can lower the hydrate formation pressure of (methane + ethane) remarkably. However, when the composition of ethane is as high as 0.832, it is more difficult to form hydrate than without THF system. Phase equilibrium model for hydrates containing THF was developed based on a two-step hydrate formation mechanism. The structure of hydrates formed from (methane + ethane + THF + water) system was also determined by Raman spectroscopy. When THF concentration in initial aqueous solution was only 0.06 mole fraction, the coexistence of structure I hydrate dominated by ethane and structure II hydrate dominated by THF in the hydrate sample was clearly demonstrated by Raman spectroscopic data. On the contrary, only structure II hydrate existed in the hydrate sample formed from (methane + ethane + THF + water) system when THF concentration in initial aqueous solution was increased to 0.10 mole fraction. It indicated that higher THF concentration inhibited the formation of structure I hydrate dominated by ethane and therefore lowered the trapping of ethane in hydrate. It implies a very promising method to increase the separation efficiency of methane and ethane.     

Thermodynamic evaluation of the (LiF + NaF + BeF2 + PuF3) system: An actinide burner fuel

In this work the LiF–BeF₂, NaF–BeF₂, and BeF₂–PuF₃ binary phase diagrams have been thermodynamically assessed. The first two systems have been optimized based on the known experimental data, whereas the last one has been treated ideally. To describe the excess Gibbs parameters of the liquid solution the modified quasi chemical model based on the quadruplet approximation has been used. The results obtained together with the data of the (LiF + PuF₃), (NaF + PuF₃), and (LiF + NaF) systems, which have been assessed in previous studies, were used to extrapolate the (LiF + NaF + BeF₂ + PuF₃) quaternary system. The calculated (LiF + NaF + BeF₂) ternary subsystem has been compared with the experimental results published in literature. The nuclear fuel properties such as the melting behaviour, the vapour pressure, or the solubility of PuF₃ in the matrix of LiF–NaF–BeF₂ have been derived based on our assessment and compared with measurements in literature.     

Thermodynamic evaluation and optimization of the (Na2CO3 + Na2SO4 + Na2S + K2CO3 + K2SO4 + K2S) system

A critical evaluation of all phase diagram and thermodynamic data were performed for the solid and liquid phases of the (Na₂CO₃ + Na₂SO₄ + Na₂S + K₂CO₃ + K₂SO₄ + K₂S) system and optimized model parameters were obtained. The Modified Quasichemical Model in the Quadruplet Approximation was used for modelling the liquid phase. The model evaluates first- and second-nearest-neighbour short-range ordering, where the cations (Na⁺ and K⁺) are assumed to mix on a cationic sublattice, while anions $({\text{CO}}_3^{2-}\text{,}{\text{SO}}_4^{2-}\text{,}\text{and}{\text{S}}^{2-})$ are assumed to mix on an anionic sublattice. The Compound Energy Formalism was used for modelling the solid solutions of (Na, K)₂(CO₃, SO₄, S). The models can be used to predict the thermodynamic properties and phase equilibria in multicomponent heterogeneous systems. The experimental data from the literature were reproduced within experimental error limits.