Luminescent rhenium(I)-gold(I) hetero organometallics linked by ethynylphenanthrolines

The first luminescent rhenium(I)-gold(I) hetero organometallics, Re{phenAu(PPh₃)}(CO)₃Cl (3) and Re{(PPh₃)AuphenAu(PPh₃)}(CO)₃Cl (4), have been prepared using the gold(I) complex AuCl(PPh₃) (PPh₃ = triphenylphosphine) and the novel rhenium(I) complexes Re(phenH)(CO)₃Cl (5) (phenH = 3-ethynyl-1,10-phenanthroline) or Re(HphenH)(CO)₃Cl (6) (HphenH = 3,8-bis(ethynyl)-1,10-phenanthroline). All the present rhenium(I) complexes 3-6 were revealed to possess a facial configuration (fac-isomer) with respect to the three carbonyl ligands. The main frameworks for these new gold(I) organometallics were constructed by the Au-C σ-bonding (with the η¹-type coordination) between the ethynylphenanthrolines and the Au(I) phosphine unit. Re(I)-Au(I) heterometallics 3 and 4 have shown single phosphorescence from the ³MLCT excited state and this observation can be interpreted in terms of the efficient intramolecular energy transfer from the Au(I) unit to the Re(I) unit.     

The effect of processing method on dry sliding performance of polyimides at high load/high velocity conditions

Polyimides can be processed by sintering or injection moulding, depending on their molecular structure. Raman spectroscopy shows differences in imide I (CO stretch), imide II (CNC axial vibration) and imide III (CNC transverse vibration) bands for both polyimide types, indicating that (i) further imidisation happens during sintering, while being amorphous and (ii) crystallisation happens during melt processing. Thermogravimetric analysis indicates no glass transition or melting temperatures until degradation at 592 °C after sintering, while moulded polyimides show a glass transition temperature at 250 °C. A dehydration reaction at 180 °C will importantly influence the sliding properties of both sintered and injection moulded polyimides. For sintered polyimide, friction and wear in cylinder-on-plate tests is mechanically controlled and mainly determined by normal loads. Overload for sintered polyimides is due to brittleness above 150 N, as also observed in debris morphology. For moulded polyimide, both normal loads and sliding velocity cause a decrease in friction and increase in wear. Overload for moulded polyimide is thermo-mechanically controlled. Sliding stability is controlled by smooth transfer, which is influenced by thermal action, plastic deformation or shear and promoted by elongation at break. Overload conditions are further discussed in relation to deformation of the Hertz line contact, recovery after sliding and the pv-limit (contact pressure × sliding velocity) related to frictional heating.     

Oxidatively induced reactions of a diimine platinum(IV) tetramethyl complex

The oxidation of the Pt(IV) tetramethyl complex [ArNCHCHNAr]PtMe₄ (Ar = 2,6-Me₂C₆H₃) has been investigated in acetonitrile and dichloromethane. Cyclic voltammetry demonstrates that the irreversible oxidation of [ArNCHCHNAr]PtMe₄ occurs at a slightly less positive oxidation potential than the irreversible oxidation of the analogous Pt(II) species [ArNCHCHNAr]PtMe₂. The product distribution arising from the oxidation depends strongly on the reaction conditions and includes cationic Pt(IV) species (acetonitrile, dichloromethane solvents) and Pt(II) species (dichloromethane only). Evidence is presented that suggests that homolytic cleavage of a weakened PtC bond in is involved in the oxidatively induced reactions.     

Reactivity of [CpRh(η-C6H3NH2-2,6-i-Pr2)](OTf)2 toward phosphines and alkynes

The cationic aniline complex [Cp^∗Rh(η⁶-2,6-(Me₂CH)₂C₆H₃NH₂)](OTf)₂ (1) was prepared from either [Cp^∗Rh(η²-NO₃)(η¹-OTf)] or [Cp^∗Rh(OH₂)₃](OTf)₂ and 2,6-diisopropylaniline. Complex 1 underwent substitution with phosphines or phosphites, indicating the labile character of the η⁶-aniline ligand. Complex 1 mediated cycloaddition reactions of several alkynes in refluxing ethanol: the [2 + 2] dimerization for PhCCPh and the [2 + 2 + 1] trimerization for PhCCH and CH₃C₆H₄CCH. The unexpected cyclobutadiene complex [Cp^∗Rh(η⁴-C₄(C(O)CH₃)₂H(SiMe₃))] was obtained from complex 1 and Me₃SiCCCCSiMe₃ and structurally characterized by X-ray diffraction.     

Iron(II) and iron(III) complexes containing ethynyl thiophene fragments

The synthesis of the new complexes Cp*(dppe)FeCC2,5-C₄H₂SR (Cp* = 1,2,3,4,5-pentamethylcyclopentadienyl; dppe = 1,2-bis(diphenylphosphino)ethane; 2a, R = CCH; 2b, R = CCSi(CH₃)₃; 2c, R = CCSi(CH(CH₃)₂)₃; 3a, R = CC2,5-C₄H₂SCCH; 3c, R = CC2,5-C₄H₂SCCSi(CH(CH₃)₂)₃) is described. The ¹³C NMR and FTIR spectroscopic data indicate that the π-back donation from the metal to the carbon rich ligand increases with the size of the organic π-electron systems. The new complexes were also analyzed by CV and the chemical oxidation of 2a and 3c was carried out using 1 equiv of [Cp₂Fe][PF₆]. The corresponding complexes 2a[PF₆] and 3c[PF₆] are thermally stable, but 2a[PF₆] was too reactive to be isolated as a pure compound. The spectroscopic data revealed that the coordination of large organic π-electron systems to the iron nucleus produces only a weak increase of the carbon character of the SOMO for these new organoiron(III) derivatives.     

Synthesis and characterization of phenylacetylene-terminated poly(silyleneethynylene-4,4′-phenylethereneethynylene)s

Two kinds of phenylacetylene-terminated poly(silyleneethynylene-4,4′-phenylethereneethynylene)s, {C₆H₅CC[Si(R)₂CCC₆H₄OC₆H₄CC]_nC₆H₅} wherein R represents methyl or phenyl, were synthesized by condensation reaction between dichlorosilanes and 4,4′-diethynyldiphenyl ether using organomagnesium reagents. The polymers were characterized by NMR, IR, gel permeation chromatography, thermogravimetric analysis, and differential scattering calorimetry.     

Synthesis and characterization of three new fluorovanadate complexes: N(C2H5)4[VOF4], N(CH3)4[VOF3Cl], N(C4H9)4[VOF3Br] and theoretical calculations of VOF4, VOF3Cl and VOF3Br ions

The reaction of VOF₃ with (C₂H₅)₄NF, (CH₃)₄NCl and (C₄H₉)₄NBr salts in anhydrous CH₃CN produced new complexes with the anion general formula [VOF₃X]⁻ in that (X = F⁻, Cl⁻, Br⁻). These were characterized by elemental analysis, IR, UV/Visible and ¹⁹F NMR spectroscopy. The optimized geometries and frequencies of the stationary point are calculated at the B3LYP/6-311G level of theory. Theoretical results showed that the VX (X = F, Cl, Br) bond length values for the [VOF₃X]⁻ in compounds 1-3 are 1.8247, 2.4031 and 2.5595 Å, respectively. Also, the VF₅ bond length values in [VOF₃X]⁻ are 1.824, 1.812 and 1.802 Å, respectively. These results reveal that the bond order for VX bonds decrease from compounds 1 to 3, while for VF₅ bonds, the bond orders increase. It can be concluded that the decrease of VX bonds lengths and the increase of VF₅ bond lengths in compounds 1-3 result from the increase of the hyperconjugation from compounds 1 to 3. Harmonic vibrational frequencies and infrared intensities for VOF₄⁻, VOF₃Cl⁻ and VOF₃Br⁻ are studied by means of theoretical and experimental methods. The calculated frequencies are in reasonable agreement with the experiment values. These data can be used in models of phosphoryl transfer enzymes because vanadate can often bind to phosphoryl transfer enzymes to form a trigonal-bipyramidal structure at the active site.     

P-Modular bis(phosphines) based on the 1,2-trans-disubstituted cyclopentane framework in synthesis, coordination chemistry, and catalysis

The review describes a class of versatile bidentate phosphines having a homochiral 1,2-disubstituted cyclopentane backbone, the use of such ligands in coordination chemistry, and their application in transition metal-catalyzed synthesis, including CH activation, CC coupling, CC hydrogenation, and hydroformylation. In particular, the synthetic potential of the multi-purpose PH and PCl reagents (R,R)- and (S,S)-C₅H₈(PX₂)₂ (X = H, Cl) is highlighted, since these open up the possibility to incorporate virtually any other PO-, PN- or PC-bonded residue (“module”) into the homochiral bis(phosphine) framework. The resulting chelate ligands allow access to transition metal catalysts with stereodiscriminating properties determined by parameters such as (i) the presence of P-substituents that are equal or pairwise different in steric demand, (ii) the spatial orientation of such substituents with respect to the coordination plane of the catalyst complex, and (iii) the combination of C- and P-chirogenic stereoelements in matched (or mismatched) fashion. A comparative discussion of the crystal structures that are currently available for the free ligands and their transition metal complexes is also presented.     

2π + 2π cycloaddition kinetics of some fluoro olefins and fluoro vinyl ethers

The second order 2π + 2π homo- and co-dimerization between various classes of fluorinated olefins has been investigated. The fluorinated olefins examined in this study were: (1) R_fOCFCF₂ (perfluorinated vinyl ethers); (2) R_fCFCF₂ (perfluorinated terminal olefins); (3) RCH₂CFCF₂; (4) PhOCFCF₂ (aryl perfluorinated vinyl ethers).Homo-dimerizations between vinyl ethers have an E_a between 20 and 24 kcal mol⁻¹ while homo-dimerizations between terminal olefins have an average E_a between 35 and 40 kcal mol⁻¹; vinyl groups have a second order cyclodimerization rate constant of formation between 1 × 10⁻⁷ and 1 × 10⁻⁴ M⁻¹ S⁻¹ while vinyl ethers have a second order cyclodimerization rate constant of formation = 1 × 10⁻¹ M⁻¹ s⁻¹. If there is a CH₂ group α to the terminal olefin, the E_a of cyclodimerization is about 7 kcal mol⁻¹) lower with respect to those olefins with a CF₂ α to the instauration. At 270 °C co-dimerizations have an average ΔS^≠ = −45 cal K⁻¹ mol⁻¹ and a second order rate constant of cyclodimerization ranging between 0.1 × 10⁻⁴ M⁻¹ S⁻¹ and 16 × 10⁻⁴ M⁻¹ S⁻¹ while homo-dimerizations have an average ΔS^≠ = −17 cal K⁻¹ mol⁻¹ and a second order rate constant which can span from 7 × 10⁻⁷ M⁻¹ S⁻¹ to as much as 1 × 10⁻¹ M⁻¹ S⁻¹ depending on the electronic nature of the perfluorinated terminal olefin.A good correlation between the electronegativity χ and the activation energy E_a demonstrates that “polarizing” groups, O, PhO, α to the olefin play an important role in the formation and stabilization of the cyclodimerization biradical intermediate.     

Solvent and phosphine dependency in the reaction of cis-RuCl2(P-P)2 (P-P = dppm or dppe) with terminal alkynes

Reaction of cis-[RuCl₂(dppm)₂] (dppm = 1,2-bis(diphenylphosphino)methane) with PhCCH and NaPF₆ utilising methanol as solvent results in the formation of the η³-butenynyl complex [Ru(η³-PhCCCCHPh)(dppm)₂][PF₆] in good yield. Similar reactions with Bu^tCCH and PrⁿCCH resulted in the corresponding alkyl-substituted complexes and all three of these compounds have been characterised by NMR spectroscopy and X-ray crystallography. The mechanism of this reaction has been probed by employing labelling experiments with both PhCCD and PhC¹³CH allowing the identity of possible intermediates in the reaction to be determined. Furthermore, [Ru(η³-PhCCCCHPh)(dppm)₂][PF₆] has been shown to be an effective regio- and stereo-selective catalyst for the dimerisation of PhCCH to Z-PhCCCHCHPh in the absence of solvent. In contrast, no evidence for the formation of alkyne coupling was obtained from the reaction of cis-[RuCl₂(dppe)₂] (dppe = 1,2-bis(diphenylphosphino)ethane) with PhCCH and NaPF₆.     

Synthesis, structure, and magnetic properties of 2,2′-(buta-1,3-diyne-1,4-diyl)bis(4,4,5,5-tetramethyl-4,5-dihydro-1H-imidazole 3-oxide 1-oxyl)

An approach to the synthesis of nitronyl nitroxide 2,2′-(buta-1,3-diyne-1,4-diyl)bis(4,4,5,5-tetramethyl-4,5-dihydro-1H-imidazole 3-oxide 1-oxyl) (4) was developed. Compound 4 is the first diradical with nitronyl nitroxide groups directly linked through a diacetylene fragment. In solid phase the diradicals are arranged in stacks with parallel CC fragments, with the distances between the terminal carbon atoms of the neighboring diacetylene groups (T and d) being 6.170 and 4.466 Å, respectively, and the angle between the translation vector and the median line passing through the CCCC fragment of 45.9°. The values of T and d are outside the range of structural criteria allowing a topochemical reaction. Thus UV irradiation does not initiate solid phase polymerization of 4. After exposure at 373 K for 1 h the crystals of 4 turn dark-brown, become X-ray amorphous and lose the majority of their paramagnetic centers without significantly changing their mass. Upon further heating up to 400-420 K the product explodes, releasing about 360 kJ/mol of heat. A diluted solution of 4 in 1,4-dioxane produces an EPR spectrum typical of a strong exchange (a multiplet of nine broadened lines with A_4N = 0.35 mT), indicating the efficiency of the CCCC fragment as an exchange channel. The character of the experimental μ_eff(T) dependence for 4 indicates a strong intramolecular antiferromagnetic-type exchange interaction (J/k_B ∼ −104 K) and the dominating weak intermolecular ferromagnetic exchange.