Structural, magnetic and magnetotransport behavior of La0.7SrxCa0.3−xMnO3 compounds

A systematic investigation of the structural, magnetic and electrical properties of a series of nanocrystalline La_0.7Sr_xCa_0.3−xMnO₃ materials, prepared by high energy ball milling method and then annealed at 900 °C has been undertaken. The analysis of the XRD data using the Win-metric software shows an increase in the unit cell volume with increasing Sr ion concentration. The La_0.7Sr_xCa_0.3−xMnO₃ compounds undergo a structural orthorhombic-to-monoclinic transition at x=0.15. Electric and magnetic measurements show that both the Curie temperature and the insulator-to-metal transition temperature increase from 259 K and 253 K correspondingly for La_0.7Ca_0.3MnO₃ (x=0) to 353 K and 282 K, respectively, for La_0.7Sr_0.3MnO₃ (x=0.3). It is argued that the larger radius of Sr²⁺ ion than that of Ca²⁺ is the reason to strengthen the double-exchange interaction and to give rise to the observed increase of transition temperatures. Using the phenomenological equation for conductivity under a percolation approach, which depends on the phase segregation of ferromagnetic metallic clusters and paramagnetic insulating regions, we fitted the resistivity versus temperature data measured in the range of 50-320 K and found that the activation barrier decreased with the raising Sr²⁺ ion concentration.     

On the coexistence of spin and lattice polarons in the La0.67−xEuxCa0.33MnO3 CMR system

The electrical and magnetic transport properties of the La_0.67−xEu_xCa_0.33MnO₃ system exhibit lowering of insulator to metal and paramagnetic to ferromagnetic transition temperature (T_C) with the increase of Eu concentration in addition to possessing CMR property. The temperature variation of electrical resistivity and magnetic susceptibility for x=0.21 is found to have two distinct regions in the paramagnetic state for T>T_P; one with the localization of lattice polaron in the high-temperature region (T>1.5T_P) satisfying the dynamics of variable range hopping (VRH) model and the other being the combination of the spin and lattice polarons in the region T_P<T<1.5T_P. The resistivity variation with temperature and magnetic field, the cusp in the resistivity peak and CMR phenomenon are interpreted in terms of coexistence of spin and lattice small polarons in the intermediate region (T_P<T<1.5T_P). The spin polaron energy in the La_0.46Eu_0.21Ca_0.33MnO₃ system is estimated to be 106.73±0.90 meV and this energy decreases with the increase of external magnetic field. The MR ratio is maximal with a value of 99.99% around the transition temperature and this maximum persists till T→0 K, at the field of 8 T.     

Metastable structure and properties of (La0.73Bi0.27)0.67Ca0.33MnO3

The electrical transport and magnetic properties of high Bi doped (La_0.73Bi_0.27)_0.67Ca_0.33MnO₃ are studied at the temperature and magnetic field ranges from 10 to 300 K and 0 to 3 T. Significant temperature and magnetic field hystereses are observed in both resistivity and magnetization measurements. Meanwhile, an enhanced magnetoresistance effect, within a wide temperature window, is obtained in the (La_0.73Bi_0.27)_0.67Ca_0.33MnO₃. The hysteresis and enhanced magnetoresistance are discussed based on an inhomogeneous metastable structure related to the Bi dopant.     

Synthesis and enhanced low-field magnetoresistance in La0.67Ca0.33MnO3 /CuO composites

The (1−x)La_0.67Ca_0.33MnO₃+xCuO composites have been synthesized by a new liquid phase method. The XRD and SEM measurements reveal that little CuO is soluble in the structure of La_0.67Ca_0.33MnO₃ and is mainly distributed at the grain boundary of La_0.67Ca_0.33MnO₃. As CuO content x increases, the magnetization M values increase until x=0.05 and M values decrease when x further increases at low temperature. For x=0.10, 0.20 and 0.30 composites, double metal-insulator transitions accompanying a single ferromagnetic transition are observed. Large low-field magnetoresistance is achieved for the composites and the largest magnetoresistance appeared when x=0.20.     

Spray-pyrolysis deposition of LaMnO3 and La1−xCaxMnO3 thin films

Ethylene glycol solutions of La-Mn(II) and La-Ca-Mn(II) citric complexes has been used as a starting material for spray-pyrolysis deposition of LaMnO₃ and La_1−xCa_xMnO₃ thin films on β-quartz, fused quartz, Si(0 0 1) and SrTiO₃(1 0 0) substrates heated during the deposition at 380 °C. At suitable post-deposition heating conditions highly uniform films, 0.1-1 μm in thickness, with good crystal structure were obtained. Highly textured LaMnO₃ films are obtained on SrTiO₃(1 0 0) substrate. Interaction between the layer and Si-containing substrates is observed during the post-deposition heating in static air.     

Electroresistance effect in La1−xCaxMnO3 (0<x<1) ceramics

Electroresistance (ER) effects were investigated for a full series of manganite ceramics La_1−xCa_xMnO₃ (0<x<1), synthesized by solid state reaction. The results indicate that while the ER effects are large only in the presence of electrically active, high E-field boundaries, the equilibrium or metastable electronic-magnetic states in the adjoining domains are also significant, as a large ER occurs only at x=0.51 and x=0.17; those compositions are both near a two-phase coexistence region, i.e. close to a compositional regime where equilibrium insulating/metallic phase domains and interfaces would occur spontaneously.     

Magnetoresistance in La1−xCaxMnO3 (0≤x<0.4)

The magnetic and transport properties of La_1−xCa_xMnO₃ (0≤x<0.4) have been systematically studied. The magnetoresistance (MR) maximum appears at x=0.2-0.25 and the temperature dependence of MR for x>0.25 shows a much broader profile than that of samples for x=0.2-0.25. Based on a scenario in which there is a short-range charge ordering (CO) state coexisting in the ferromagnetic state matrix for x>0.25, and the least or even no short-range CO state exists in samples for x=0.2-0.25, the above observations can be understood.     

Large magnetoresistance in low temperature metallic region of manganite compounds (La0.7−2xEux)(Ca0.3Srx)MnO3 (0.05≤x≤0.15)

Magnetoresistance (MR) and magnetization (dc and ac) measurements have been carried out on the manganites, (La_0.7−2xEu_x)(Ca_0.3Sr_x)MnO₃ (0.05≤x≤0.15), in the temperature range of 5-320 K. At 5 K, an unusually large MR of almost 98% is observed in the x=0.15 sample, nearly up to fields of 4-5 T. This large high-field MR occurs in the metallic region, far below the insulator-metal transition temperature, and does not vary linearly with applied field. The unusual magnetoresistance is explained in the light of various possibilities such as phase segregation, cluster spin-glass behavior, etc.     

Electrical conductivity and low field magnetoresistance in polycrystalline La1−xKxMnO3 pellets prepared by pyrophoric method

Electrical conductivity and magnetoresistance of a series of monovalent (K) doped La_1−xK_xMnO₃ polycrystalline pellets prepared by pyrophoric method have been reported. K doping increases the conductivity as well as the Curie temperature (T_C) of the system. Curie temperature increases from 260 to 309 K with increasing K content. Above the metal-insulator transition temperature (T>T_MI), the electrical resistivity is dominated by adiabatic polaronic model, while in the ferromagnetic region (50<T<T_MI), the resistivity is governed by several electron scattering processes. Based on a scenario that the doped manganites consist of phase separated ferromagnetic metallic and paramagnetic insulating regions, all the features of the temperature variation of the resistivity between ∼50 and 300 K are described very well by a single expression. All the K doped samples clearly display the existence of strongly field dependent resistivity minimum close to ∼30 K. Charge carrier tunneling between antiferromagnetically coupled grains explains fairly well the resistivity minimum in monovalent (K) doped lanthanum manganites. Field dependence of magnetoresistance at various temperatures below T_C is accounted fairly well by a phenomenological model based on spin polarized tunneling at the grain boundaries. The contributions from the intrinsic part arising from DE mechanism, as well as, the part originating from intergrannular spin polarized tunneling are also estimated.     

Epitaxial growth La0.67Ca0.33MnO3 thin film by radio frequency sputtering method

Perfect epitaxial growth of La_0.67Ca_0.33MnO₃ (LCMO) thin film has been achieved on (1 0 0) LaAlO₃ (LAO) single crystal substrate by radio frequency sputtering method. X-ray diffraction (XRD) and electron diffraction analysis indicates that La_0.67Ca_0.33MnO₃ film grows epitaxially on LaAlO₃ along [1 0 0] direction of the substrate. The resistivity variation with temperature of the film shows a sharp metal to semiconductor transition peak around 253 K, which is close to that of the target. The magnetoresistance (MR) also reveals high quality epitaxy film characteristic at low temperatures and near the metal to semiconductor transition temperature.     

A variable temperature EPR study of the manganites (La1/3Sm2/3)2/3SrxBa0.33−xMnO3 (x=0.0, 0.1, 0.2, 0.33): Small polaron hopping conductivity and Griffiths phase

Four manganite samples of the series, (La_1/3Sm_2/3)_2/3Sr_xBa_0.33−xMnO₃, with x=0.0, 0.1, 0.2 and 0.33, were investigated by X-band (∼9.5 GHz) electron paramagnetic resonance (EPR) in the temperature range 4-300 K. The temperature dependences of EPR lines and linewidths of the samples with x=0.0, 0.1 and 0.2, containing Ba²⁺ ions, exhibit similar behavior, all characterized by the transition temperatures (T_C) to ferromagnetic states in the 110-150 K range. However, the sample with x=0.33 (containing no Ba²⁺ ions) is characterized by a much higher T_C=205 K. This is due to significant structural changes effected by the substitution of Ba²⁺ ions by Sr²⁺ ions. There is an evidence of exchange narrowing of EPR lines near T_min, where the linewidth exhibits the minimum. Further, a correlation between the temperature dependence of the EPR linewidth and conductivity is observed in all samples, ascribed to the influence of small-polaron hopping conductivity in the paramagnetic state. The peak-to-peak EPR linewidth was fitted to ΔB_pp(T)=ΔB_pp,min+A/Texp(−E_a/k_BT), with E_a=0.09 eV for x=0.0, 0.1 and 0.2 and E_a=0.25 eV for x=0.33. From the published resistivity data, fitted here to σ(T)∝1/T exp(−E_σ/k_BT), the value of E_σ, the activation energy, was found to be E_σ=0.18 eV for samples with x=0.0, 0.1 and 0.2 and E_σ=0.25 eV for the sample with x=0.33. The differences in the values of E_a and E_σ in the samples with x= 0.0, 0.1and 0.2 and x=0.33 has been ascribed to the differences in the flip-flop and spin-hopping rates. The presence of Griffiths phase for the samples with x=0.1 and 0.2 is indicated; it is characterized by coexistence of ferromagnetic nanostructures (ferrons) and paramagnetic phase, attributed to electronic phase separation.     

Synthesis, structural and transport properties of nanocrystalline La1−xBaxMnO3 (0.0≤x≤0.3) powders

Nanocrystalline La_1−xBa_xMnO₃ (0.0≤x≤0.3) manganites have been prepared by a simple and instantaneous solution combustion method, which is a low temperature initiated synthetic route to obtain fine-grained powders with relatively high surface area. The phase purity and crystal structure of the combustion products are carried out by powder X-ray diffraction. The as-made nanopowders are in cubic phase. On calcination to 900 °C, barium doped manganites retain cubic phase, whereas barium free manganite transformed to rhombohedral phase. The scanning electron microscope (SEM) results revealed that the combustion-derived compounds are agglomerated with fine primary particles. The doped manganites have surface area in the range 24-44 m²/g. The surface area of the manganites increases with barium content, whereas it decreases on calcination. Both undoped and doped lanthanum manganites show two active IR vibrational modes at 400 and 600 cm⁻¹. The low temperature resistivity measurements have been carried out by four-probe method down to 77 K. All the samples exhibit metal-insulator behaviour and metal-insulator transition temperature (T_M-I) in the range 184-228 K and it is interesting to note that, as the barium content increases the T_M-I shifts to lower temperature side. The maximum T_M-I of 228 K is observed for La_0.9Ba_0.1MnO₃ sample.     

Structural and magnetic phase diagram and room temperature CMR effect of La1−xAgxMnO3

The study of the structural and magnetic phase diagram of the manganites La_1−xAg_xMnO₃ shows similarity with the La_1−x′Sr_x′MnO₃ series, involving a metallic ferromagnetic domain at relatively high temperature (≈300 K). The Ag-system differs from the Sr-one by a much smaller homogeneity range (x≤1/6) and the absence of charge ordering. But the most important feature of the Ag-manganites deals with the exceptionally high magnetoresistance (−25%) at room temperature under 1.2 T, that appears for the composition x=1/6. The latter is interpreted as the coincidence of the optimal double exchange condition (Mn³⁺:Mn⁴⁺=2) with T_max=300 K (maximum of the ρ(T) curve in zero field).     

Effect of Mn-site vacancies on the magnetic entropy change and the Curie temperature of La0.67Ca0.33Mn1−xO3 perovskite

Single-phase polycrystalline samples of La_0.67Ca_0.33Mn_1−xO₃ (x=0.00, 0.02, 0.04, 0.06) have been prepared using the sol-gel method. The structure, magnetocaloric properties and the Curie temperature of the samples with different Mn vacancy concentrations have been investigated. The experimental results show that vacancy doping at the Mn-sites has a significant influence on the magnetic properties of La_0.67Ca_0.33Mn_1−xO₃. The Curie temperature decreases monotonically with increasing the Mn-site vacancy concentration x. A remarkable enhancement of the magnetic entropy change has been obtained in the La_0.67Ca_0.33Mn_0.98O₃ sample. The entropy change reaches |ΔS_M|=3.10 J kg⁻¹ K⁻¹ at its Curie temperature (264 K) under an applied magnetic field H=10 kOe, which is almost the same value as that of pure Gd.     

Electrical transport of (1−x)La0.7Ca0.3MnO3+xAl2O3 composites

We report the resistivity (ρ)-temperature (T) patterns in (1-x)La_0,7Ca_0,3MnO₃+xAl₂O₃ composites (0≤x≤0.05) over a temperature regime of 50-300 K. Al₂O₃ addition has increased the resistivity of these composites. The Curie temperature (T_C) is almost independent on the Al₂O₃ content and is about 250 K for all the samples, while the metal-insulator transition temperature (T_MI) decreases with increasing Al₂O₃ content. Based on the phenomenological equation for conductivity under a percolation approach, which is dependent on the phase segregation of ferromagnetic metallic clusters and paramagnetic insulating regions, we fitted the experimental data (ρ−T) from 50 to 300 K and find that the activation barrier increases as Al₂O₃ content increases.     

Influence of microstructures on exchange bias behaviors of La0.7Sr0.3MnO3/La0.33Ca0.67MnO3 bilayers

Ferromagnetic La_0.7Sr_0.3MnO₃ (LSMO) and antiferromagnetic La_0.33Ca_0.67MnO₃ (LCMO) layers were grown on SrTiO₃ (STO) substrates by the pulsed laser deposition technique. LSMO films had rougher surfaces and larger grain sizes than LCMO films. Fully strained bilayers, in which each layer was as thin as 10 nm, were prepared by changing their stacking sequences, i.e. LSMO/LCMO/STO and LCMO/LSMO/STO. The former had higher T_C (350 K) than the latter (300 K), and exchange bias effects were only observed in the former bilayers. This revealed that microstructures could play an important role in the transport and magnetic properties of manganese oxide thin films.     

Preparation and study of silver added La0.67Ca0.33MnO3 film

La_0.67Ca_0.33MnO₃ (LCMO) and Ag admixed La_0.67Ca_0.33MnO₃ (Ag-LCMO) polycrystalline films have been prepared on SrTiO₃ single crystal (100) substrates by ultrasonic spray pyrolysis technique. These films are characterized using XRD, SEM, and temperature dependence of resistivity (ρ-T) and ac susceptibility (χ-T). The films are having cubic structure with lattice parameters as 3.890 and 3.885 Å for LCMO and Ag-LCMO films, respectively. The peek in ρ-T curve (T_p) and the ferromagnetic transition temperature (T_C) for the Ag-LCMO film is higher than that of LCMO film. The stability of both the films was tested by repeated measurements of its characteristics over a period of one week after several thermal cycling from room temperature to 77 K. In the LCMO film, the peak in the ρ-T curve (T_p) is found to shift towards lower value and conduction noise of the film increases in the subsequent measurements. In the case of Ag-LCMO the value of T_p, T_C and conduction noise of the film did not change even after several measurements. Silver segregating at the grain boundaries in Ag-LCMO polycrystalline film seems to be responsible for improving the characteristics of Ag-LCMO films.     

Electronic transport and magnetic studies of La1−xCax−0.08Sr0.04Ba0.04MnO3

Lanthanum based mixed valence manganite system La_1−xCa_x−0.08Sr_0.04Ba_0.04MnO₃ (LCSBMO; x=0.15, 0.24 and 0.33) synthesized through the sol-gel route is systematically investigated in this paper. The electronic transport and magnetic susceptibility properties are analyzed and compared, apart from the study of unit cell structure, microstructure and composition. Second order phase transition is observed in all the samples and significant difference is observed between the insulator to metal transition temperature (T_MI) and paramagnetic (PM) to ferromagnetic (FM) transition temperature (T_C). In contrast to the insulating FM behaviour usually observed in La_1−xCa_xMnO₃ (LCMO) for x=0.15, a clear insulator to metal transition is observed for LCSBMO for the same percentage of lanthanum. The temperature dependent resistivity of polycrystalline pellets, when obeying the well studied law ρ=ρ_o+ρ₂T² for T<T_MI, is observed to differ significantly in the values of ρ_o and ρ₂, with the electrical conductivity increasing with x. The variable range hopping model has been found to fit resistivity data better than the small polaron model for T>T_MI. AC magnetic susceptibility study of the polycrystalline powders of the manganite system shows the highest PM to FM transition of 285 K for x=0.33.     

Room temperature magnetic entropy change and magnetoresistance in La0.70(Ca0.30−xSrx)MnO3:Ag 10% (x=0.0−0.10)

The magnetic and magnetocaloric properties of polycrystalline La_0.70(Ca_0.30−xSr_x)MnO₃:Ag 10% manganite have been investigated. All compositions are crystallized in single phase orthorhombic Pbnm space group. Both, the insulator–metal transition temperature (T^IM) and Curie temperature (T_c) are observed at 298 K for x=0.10 composition. Though both T^IM and T_c are nearly unchanged with Ag addition, the MR is increased. The MR at 300 K is found to be as large as 31% with magnetic field change of 1 T, whereas it reaches up to 49% at magnetic field of 3 T for the La_0.70Ca_0.20Sr_0.10MnO₃:Ag_0.10 sample. The maximum entropy change (ΔS_Mmax) at near its T_c (300.5 K) is 7.6 J kg⁻¹ K⁻¹ upon the magnetic field change of 5 T. The La_0.70Ca_0.20Sr_0.10MnO₃:Ag_0.10 sample having good MR (31%^1 T, 49%^3 T) and reasonable change in magnetic entropy (7.6 J kg⁻¹.K⁻¹, 5 T) at 300 K can be a potential magnetic refrigerant material at ambient temperatures.     

Electron diffraction evidence of charge-ordering at room-temperature in La1−xCaxMnO3 (0.55≤x≤0.67)

Temperature dependent electron diffraction of La_1−xCa_xMnO₃ for 0.55≤x≤0.67 using transmission electron microscope (TEM) has been carried out in the temperature range of 106-300 K to study the melting of charge-ordering across the transition temperature. Clear signature of charge-ordering as evident by the presence of diffuse super-lattice spots persist even at room temperature. This has been consistently observed for four different samples with compositions within the range of 0.55≤x≤0.67. The results indicate emergence of some degree of itinerancy in the localized charge carriers as temperature rises.