Exchange bias in Co nanoparticles embedded in an Mn matrix

Magnetic properties of Co nanoparticles of 1.8 nm diameter embedded in Mn and Ag matrices have been studied as a function of the volume fraction (VFF). While the Co nanoparticles in the Ag matrix show superparamagnetic behavior with T_B=9.5 K (1.5% VFF) and T_B=18.5 K (8.9% VFF), the Co nanoparticles in the antiferromagnetic Mn matrix show a transition peak at ∼65 K in the ZFC/FC susceptibility measurements, and an increase of the coercive fields at low temperature with respect to the Ag matrix. Exchange bias due to the interface exchange coupling between Co particles and the antiferromagnetic Mn matrix has also been studied. The exchange bias field (H_eb), observed for all Co/Mn samples below 40 K, decreases with decreasing volume fraction and with increasing temperature and depends on the field of cooling (H_fc). Exchange bias is accompanied by an increase of coercivity.     

Fabrication and magnetic properties of Fe3O4 nanowire arrays in different diameters

Fe₃O₄ nanowire arrays with different diameters of D=50, 100, 150 and 200 nm were prepared in anodic aluminum oxide (AAO) templates by an electrodeposition method followed by heat-treating processes. A vibrating sample magnetometer (VSM) and a Quantum Design SQUID MPMS magnetometer were used to investigate the magnetic properties. At room temperature the nanowire arrays change from superparamagnetism to ferromagnetism as the diameter increases from 50 to 200 nm. The zero-field-cooled (ZFC) and field-cooled (FC) magnetization measurements show that the blocking temperature T_B increases with the diameter of nanowire. The ZFC curves of D=50 nm nanowire arrays under different applied fields (H) were measured and a power relationship between T_B and H were found. The temperature dependence of coercivity below T_B was also investigated. Mössbauer spectra and micromagnetic simulation were used to study the micro-magnetic structure of nanowire arrays and the static distribution of magnetic moments of D=200 nm nanowire arrays was investigated. The unique magnetic behaviors were interpreted by the competition of the demagnetization energy of quasi-one-dimensional nanostructures and the magnetocrystalline anisotropy energy of particles in nanowires.     

Numerical simulation of magnetic interactions in polycrystalline YFeO3

The magnetic behavior of polycrystalline yttrium orthoferrite was studied from the experimental and theoretical points of view. Magnetization measurements up to 170 kOe were carried out on a single-phase YFeO₃ sample synthesized from heterobimetallic alkoxides. The complex interplay between weak-ferromagnetic and antiferromagnetic interactions, observed in the experimental M(H) curves, was successfully simulated by locally minimizing the magnetic energy of two interacting Fe sublattices. The resulting values of exchange field (H_E=5590 kOe), anisotropy field (H_A=0.5 kOe) and Dzyaloshinsky–Moriya antisymmetric field (H_D=149 kOe) are in good agreement with previous reports on this system.     

Photo-induced bias of the hysteresis loop in ferrites at room temperature with long-time memory

New photo-magnetic effects with an indefinitely long-time memory are found at room temperature in the epitaxial Mg_0.75Mn_0.21Co_0.04Fe₂O₄ ferrite film. Illumination of the ferrimagnetic material with low-intensity (0.4 W cm⁻²) circularly polarized light with or without a static magnetic field in the Faraday effect geometry results in a number of nonlinear effects in both space and time. In a uniform crystal with cubic symmetry, the long-lived photo-induced magnetization (PIM) with a unidirectional anisotropy appears along the direction of the incoming light. The effects depend on a combination of magnetic field H and the helicity of circularly polarized light σ. Two combinations H⁺,σ⁺ and H⁻,σ⁻ lead to a photo-induced unidirectional anisotropy with a shift of the hysteresis loop along an applied field and a change in loop parameters. The loop contracts by a factor of two, the shift of the mid-point H_sh increases by factor of five surpassing the coercivity H_c, the coercivity H_c1 and remanence M_r1 (for decreasing applied field) reverse the sign, increasing by 9 Oe and reducing by a factor of 4.5, respectively. The effects cannot be erased by a conventional demagnetization (using an AC current that is reduced to zero amplitude), but can be removed using an illumination with two other combinations (H⁺,σ⁻ and H⁻,σ⁺) as well as by heating at temperatures higher than the Curie temperature. This long-lived room-temperature memory effect may arise from the formation of complex photo-induced defects including photo-induced magnetic polarons. The possible mechanisms responsible for the appearance of a room-temperature photo-induced unidirectional anisotropy with a long-lived memory are discussed. These new photo-magnetic effects may find an application in magneto-optical memory devices.     

Magnetic ordering in CeMnCuSi2

Temperature and field-dependent magnetization measurements on polycrystalline CeMnCuSi₂ reveal that the Mn moments in this compound exhibit ordering with a ferromagnetic (FM) component ordered instead of the previously reported purely antiferromagnetic (AFM) ordering. The FM ordering temperature, T_c, is about 120 K and almost unchanged with external fields up to 50 kOe. Furthermore, an AFM component (such as in a canted spin structure) is observed to be present in this phase, and its orientation is modified rapidly by the external magnetic field. The Ce L₃-edge X-ray absorption result shows that the Ce ions in this compound are nearly trivalent, very similar to that in the heavy fermion system CeCu₂Si₂. Large thermomagnetic irreversibility is observed between the zero-field-cooled (ZFC) and field-cooled (FC) M(T) curves below T_c indicating strong magnetocrystalline anisotropy in the ordered phase. At 5 K, a metamagnetic-type transition is observed to occur at a critical field of about 8 kOe, and this critical field decreases with increasing temperature. The FM ordering of the Mn moments in CeMnCuSi₂ is consistent with the value of the intralayer Mn–Mn distance R^a_Mn–Mn=2.890 Å, which is greater than the critical value 2.865 Å for FM ordering. Finally, a magnetic phase diagram is constructed for CeMnCuSi₂.     

Disordering effects and property changes in fast neutron irradiated YIG

Damage region structure and property changes of YIG irradiated atD=10¹⁸?7.8×10¹⁹ n/cm² were studied. Damage regions at 300 K were found to consist of 1) a core of Fe³⁺ paramagnetic phase (PP) withgΔ=0.8 mm/s; 2) a shell of Fe³⁺ intermediate magnetic phase with heavily distorted bond geometry and <H _eff>≤300 kOe; 3) Fe³⁺ (a, d) surrounded by oxygen vacancies and interstitials. The dose dependence of PP concentration is given byC _PP=1-exp(?βD), yielding PP core radiusr _PP=12,5 Å. Magnetic ordering in PP was found to arise atT _tr=90 K. NGR probabilityf′ under irradiation was found to decrease linearly according to Δf′/f′=?C _PP(D). Net magnetization change was found, using the Gilleo model, to obey an analogous relationship ΔM(T)/M(T)=?C _PP(D).T _c dose dependence is given by ΔT _c/T _c=?0.5×C _PP(D) and can be related to lattice parameter change to yield Δa ₀/a ₀=(1.42±0.04)×10^?4×C _PP(D). External field experiments revealed a complex dependence ofK ₁ on PP concentration, elastic stress field magnitude and a with a minimum atD=10¹⁹ n/cm².     

Thermal stability and switching field of hard/soft-stacked perpendicular media

The time dependence of remanence coercivity and thermal stability were investigated for hard/soft-stacked media consisting of a magnetically hard granular layer underneath a very thin soft layer with a large saturation magnetization, M_s. The values of remanence coercivity at measurement times t′=10³ and 10⁻⁵ s (pulse field) were measured, and defined as H_r and H_r^P. The remanence coercivity on the recording time scale, H_r (1 ns), and the energy barrier, ΔE/kT, were evaluated by fitting H_r and H_r^P to Sharrock's equation taking into account the power law variation of the energy barrier, n. The value of H_r (1 ns) for a (Co–Pt)–SiO₂ (9 nm)/Co–SiO₂ (2 nm) stacked medium with an interfacial coupling control layer was about 9 kOe, which was less than half of that of a (Co–Pt)–SiO₂ (9 nm) conventional medium (=21.3 kOe). The value of ΔE/kT for the stacked medium was about 111 (n=0.7), and was not significantly different from the conventional medium. Moreover, no significant difference in the rate of decrease of H_r with increasing temperature was observed between media with and without interlayers. These results indicate that the use of a thin soft layer with high M_s was effective at significantly reducing H_r with no notable change in thermal stability.     

Properties of exchange interaction in Yb3Fe5O12 under extreme conditions

In Yb₃Fe₅O₁₂, the exchange effective field can be expressed as H_eff=−λ·M_Fe=−λχ_eff·H_e=−γ·H_e where γ is named as the exchange field parameter and H_e is the external magnetic field. Then, in this paper, by the discussions on the characteristics of the exchange field parameter γ, the properties of exchange interaction in ytterbium iron garnet (Yb₃Fe₅O₁₂) are analyzed under extreme conditions (high magnetic fields and low temperatures). Our theory suggests that the exchange field parameter γ is the function of the temperatures under different external magnetic fields, and γ=a+b·T+c·T², where the coefficients a, b, c are associated with the external magnetic fields and the magnetized directions. Thus, the temperature-dependence, field-dependence and anisotropic characteristics of the exchange interaction in Yb₃Fe₅O₁₂ are revealed. Also, excellent fits to the available experiments are obtained.     

The roles of the exchange and dipole couplings on the magnetoresistance for the nanoparticle arrays

Based on Monte Carlo simulations and resistor network model, the tunneling magnetoresistance (TMR) for the square anisotropic magnetic nanoparticle arrays with the exchange coupling J and dipolar coupling D has been studied. The simulated results reveal that, the coercivity H_c increases with decreasing value of D and increasing magnitude of J; the value of TMR_max decreases with enhancing value of J; for D<0.1, the value of TMR_max decreases with increasing value of D, while in contrast for D>0.1, it increases with increasing value of D. Those behaviours have been interpreted with the competition of the different energies, including the random anisotropy, exchange and dipolar energies.     

High concentration of hematite nanoparticles in a silica matrix: Structural and magnetic properties

The α-Fe₂O₃/SiO₂ nanocomposite containing 45 wt% of hematite was prepared by the sol-gel method followed by heating in air at 200 °C. The so-obtained composite of iron(III) nanoparticles dissolved in glassy silica matrix was investigated by X-ray powder diffraction (XRPD), transmission electron microscopy (TEM), and superconducting quantum interference device (SQUID) magnetometry. XRPD confirms the formation of a single-phase hematite sample, whereas TEM reveals spherical particles in a silica matrix with an average diameter of 10 nm. DC magnetization shows bifurcation of the zero-field-cooled (ZFC) and field-cooled (FC) branches up to the room temperature with a blocking temperature T_B=65 K. Isothermal M(H) dependence displays significant hysteretic behaviour below T_B, whereas the room temperature data were successfully fitted to a weighted Langevin function. The average particle size obtained from this fit is in agreement with the TEM findings. The small shift of the T_B value with the magnetic field strength, narrowing of the hysteresis loop at low applied field, and the frequency dependence of the AC susceptibility data point to the presence of inter-particle interactions. The analysis of the results suggests that the system consists of single-domain nanoparticles with intermediate strength interactions.     

Effect of the intergrain interactions on the coercivity and its angular dependence for Nd(FeCo)B sintered magnets

Effects of interactions between grains with different alignment degrees on the coercivity and its angular dependence for Nd₁₆(Fe_0.8Co_0.2)₇₈B₆ sintered magnets have been studied. The experiments show that the intrinsic coercivity _jH_c decreases with enhancing grain alignment (decreasing alignment coefficient σ), the coercivity _jH_c(θ) increases with increasing angle θ between the applied field and the texture axis of the magnets and the variation ratio is larger for the magnets with better grain alignment. The coercivity of the magnets should be determined by the critical field making the moment of individual grains reverse and the interactions between the grains. For the sintered magnets composed of the grains with μm size, the magnetostatic interaction between the grains is stronger than the exchange coupling interaction and it makes the coercivity of magnet increase with increasing alignment coefficient σ. Taking into account the intergrain interactions, the starting field theory of coercivity is in good agreement with the experimental results for Nd₁₆(Fe_0.8Co_0.2)₇₈B₆ sintered magnets.     

Effect of Co underlayer on soft magnetic properties and microstructure of FeCo thin films

High saturation magnetization soft magnetic FeCo (=Fe₆₅Co₃₅) films were prepared using a thin Co underlayer. The FeCo/Co films exhibited a well-defined in-plane uniaxial anisotropy with easy axis coercivity (H_ce) of 10 Oe and hard axis coercivity (H_ch) of 3 Oe, and a half reduction of H_c with H_ce=4.8 Oe and H_ch=1.0 Oe was obtained when the composition was adjusted to 25 at% Co. The effective permeability of the films remains flat around 250 to 800 MHz. The saturation magnetostriction was 5.2×10⁻⁵ and the intrinsic stress was 0.8 GPa in FeCo single layer, both were slightly reduced by Co underlayer. The Co underlayer changed the preferred orientation of the FeCo films from (2 0 0) to (1 1 0) but more significantly, reduced the average grain size from ∼74 to ∼8.2 nm. It also reduced the surface roughness from 2.351 to 0.751 nm. The initial stage and interface diffusion properties were examined by TEM and XPS.     

Magneto-crystalline properties of BaFe12−2x M x Sn x O19 (M = Sn, Ni, Zn) ferrite powders

BaFe_12?2x M _x Sn _x O₁₉ compounds, where M?=?Sn²⁺, Ni²⁺ or Zn²⁺ ions, were synthesized by mechanical milling and partially by citrate precursor methods. Analysis of magneto-crystalline structure has been carried out by Mössbauer spectroscopy. The Sn⁴⁺ ions replace Fe³⁺ ions on 2b and slightly on 2a?+?4f₁ sites, Zn²⁺ ions strongly prefer 4f₁ sites, Sn²⁺ ions prefer 4f₁ sites too and Ni²⁺ ions occupy 4f₂ and 12k or 2a sites. The magnetic properties were evaluated by the vibrating sample magnetometry and the thermomagnetic analysis. A large variation of the intrinsic coercivity H _c (330 to 78 kA/m) and of temperature coefficient of coercivity of ΔH _c /Δ? (0.39 to 0.22 kA/m°C) were achieved as a function of the (Zn–Sn) and (Sn–Sn) substitutions, respectively. The Curie temperature T _c decreased with the (Ni–Sn) substitution from 447 to 399°C.     

Crystal structure and ferromagnetism of (n-C3H7)4N[CoFe(dto)3] (dto=C2O2S2)

Recently, we have discovered a new type of first order phase transition around 120 K for (n-C₃H₇)₄N[Fe^IIFe^III(dto)₃] (dto=C₂O₂S₂), where the charge transfer transition between Fe^II and Fe^III occurs reversibly. In order to elucidate the origin of this peculiar first order phase transition. Detailed information about the crystal structure is indispensable. We have synthesized the single crystal of (n-C₃H₇)₄N[Co^IIFe^III(dto)₃] whose crystal structure is isomorphous to that of (n-C₃H₇)₄N[Fe^IIFe^III(dto)₃], and determined its detailed crystal structure. Crystal data: space group P6₃, a=b=10.044(2) Å, c=15.960(6) Å, α=β=90°, γ=120°, Z=2 (C₁₈H₂₈NS₆O₆FeCo). In this complex, we found a ferromagnetic transition at T_c=3.5 K. Moreover, on the basis of the crystal data of (n-C₃H₇)₄N[Co^IIFe^III(dto)₃], we determined the crystal structure of (n-C₃H₇)₄N[Fe^IIFe^III(dto)₃] by simulation of powder X-ray diffraction results.     

Magnetic properties of Nd–Fe–B film magnets prepared by RF sputtering

Highly oriented films of ∼6 μm in thickness consisting of the Nd₂Fe₁₄B compound phase were obtained by a three-dimensional sputtering method at room temperature and the subsequent crystallization by annealing. The c-axis orientation and coercivity of film samples were sensitive to the sputtering parameters and annealing conditions. The optimum temperature and time for annealing were 650 °C and 30 min to show the highest coercivity without any deterioration for the orientation of Nd₂Fe₁₄B grains, and furthermore the degree of c-axis orientation was increased by decreasing the Ar gas pressure or input power for sputtering. The resultant film magnets with good magnetic properties of B_r=∼1.06 T, H_C=∼371 kA/m, and (BH)_max=∼160 kJ/m³ were obtained under the optimized parameters for sputtering.     

Synthesis and surface modified hard magnetic properties in Co0.5Pt0.5 nanocrystallites from a rheological liquid precursor

Small crystallites of a metastable phase Co_0.5Pt_0.5 are precipitated by heating a rheological liquid precursor of cobalt–hydrazine complex and platinum chloride H₂PtCl₆·xH₂O in polymer molecules of poly(vinylpyrrolidone) (PVP) in ethylene glycol. The hydrazine co-reduces nascent atoms from the Co²⁺ and Pt⁴⁺ that recombine and grow as Co_0.5Pt_0.5. The PVP molecules cap a growing Co_0.5Pt_0.5 as it achieves a critical size so that it stops growing further in given conditions. X-ray diffraction pattern of a recovered powder reveals a crystalline Co_0.5Pt_0.5 phase (average crystallite size D∼8 nm) of a well-known Fm3m-fcc crystal structure with the lattice parameter a=0.3916 nm (density ρ=14.09 g/cm³). A more ordered L1₀ phase (ρ=15.91 g/cm³) transforms (D≥25 nm) upon annealing the powder at temperature lesser than 700 °C (in vacuum). At room temperature, the virgin crystallites bear only a small saturation magnetization M_s=5.54 emu/g (D=8 nm) of a soft magnet and it hardly grows on bigger sizes (D≤31 nm) in a canted ferromagnetic structure. A rectangular hysteresis loop is markedly expanded on an optimally annealed L1₀ phase at 800 °C for 60 min, showing a surface modified coercivity H_c=7.781 kOe with remnant ratio M_r/M_s=0.5564, and M_s=39.75 emu/g. Crystallites self-assembled in an acicular shape tailor large H_c from ideal single domains and high magnetocrystalline anisotropy of a hard magnet L1₀ phase.     

Remarkable power-law temperature dependencies of inter-grain conductivity

Electrical conductivities with temperature dependencies of the type σ(T)−σ(0)∝T^p are remarkable when measurements over extended ranges of T show that p=1 or 2 over wide ranges of σ. We report on such behaviors for inter-grain conductivities of polycrystalline Sr₂CrMoO₆ samples. We show that for certain ranges of parameters the ‘fluctuation induced tunneling’ model fits these dependencies very well.     

Spin-wave theory for finite classical magnets and superparamagnetic relation

Analytical calculations based on finite-size spin-wave theory and Monte Carlo (MC) simulations are performed to investigate the validity of the well-known relation m(H, T) = M(H, T)B _D[M(H, T) H/T] between the induced magnetization m of the magnetic particle and its intrinsic magnetization M for the Ising and isotropic classical models (B _D(x) is the Langevin function, D is the number of spin components, is the number of atoms in the particle). It follows from general arguments and from our analytical results for the Heisenberg model at T≪T _c that this relation is not exact for any finite D and nonzero temperature. Nevertheless, corrections to this formula remain very small practically in the whole range T < T _c if ≫ 1, as confirmed by our Monte Carlo calculations. At T T _c/4 there is a good agreement between the MC and finite-size spin-wave calculations for the field dependence of m and M for the Heisenberg model with free boundary conditions. Received 1st December 2000