Catalytic and non-catalytic growth of amorphous silica nanowires and their photoluminescence properties

A simple method based on the thermal oxidation of Si wafers in presence of a mixture of MgO and graphite powder was developed for large-scale synthesis of very long amorphous silica nanowires. The synthesis was done with and without gold as the catalyst. Almost aligned uniform nanowires with diameters within 60-90 nm and length up to few hundred micrometers were obtained using gold as the catalyst while bicycle chain like nanowires were obtained in absence of the catalyst. The growth sequence of the nanowires was observed through scanning electron microscope. Both forms of the nanowires emitted blue lights at 414 nm (3 eV) under excitation at 250 nm.     

Room temperature synthesis and characterization of NaEuF4 nanorods and Na5Eu9F32 nanospheres

A simple solution-based route was used to selectively synthesize two ternary metal fluoride NaEuF₄ nanorods with hexagonal structure and Na₅Eu₉F₃₂ nanospheres with cubic structure at room temperature. It is found that NaEuF₄ nanorods can be transformed into Na₅Eu₉F₃₂ nanospheres with the increasing the reaction time in the presence of excessive NaF. The luminescence properties of these two metal fluorides were investigated and the possible formation mechanism was discussed.     

The structure and photoluminescence properties of Cr-doped SiC films

Cr-doped SiC films are prepared by the RF-magnetron sputtering technique on Si substrates with a composite target of a single-crystalline SiC containing several Cr pieces on the surface. The as-deposited films are annealed in the temperature of 1000 °C under nitrogen ambient. The structure of the samples has been characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and Raman scattering measurement. The results show that the SiC crystal is formed and that majority of Cr doped in the SiC resulted in the formation of the C clusters. Then the photoluminescence (PL) spectra of the samples are observed in the visible range at room temperature. The optical properties of the samples have also been discussed briefly. We attribute the origin of the 412-nm PL band to a kind of C cluster center.     

Synthesis and red-shifted photoluminescence of single-crystalline ZnO nanowires

Local-oriented single-crystalline ZnO nanowires have been synthesized in large scale by a simple microemulsion method in the presence of sulfonate-polystyrene (S-PS) and dodecyl benzene sulfonic acid sodium salt (DBS). The as-prepared product is characterized by using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), infrared (IR) spectra and photoluminescence (PL) spectrum. The nanowires exhibit a local congregation and preferentially grow along the [0 0 2] facet. FT-IR spectrum indicates that S-PS is adsorbed on the surface of ZnO nanowires. The PL spectrum shows evidently red-shifted ultraviolet (UV) emission.     

Initial study on the structure and photoluminescence properties of SiC films doped with Al

SiC films doped with aluminum (Al) were prepared by the rf-magnetron sputtering technique on p-Si substrates with a composite target of a single crystalline SiC containing several Al pieces on the surface. The as-deposited films were annealed in the temperature range of 400-800 °C under nitrogen ambient. The thin films have been characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The results show that the introduction of Al into films hinders crystalline formation process. And with the increase of annealing temperature, more Si particles are formed in the films, which strongly affect the optical absorption properties. The photoluminescence (PL) spectra of the samples show two peaks at 370 nm and 412 nm. The intensities of the PL peaks are evidently improved after Al doped. We attribute the origin of the two PL peaks to a kind of Si-related defect centres. The obtained results are expected to have important applications in modern optoelectronic devices.     

Energy-transferred photoluminescence from thiophene/phenylene oligomer thin films

Photoluminescence (PL) based on Förster energy transfer between p-sexiphenyl (p-6P) and 5,5′-bis(4-phenylyl)-2,2′-bithiophene (BP2T) was investigated for their coevaporated and laminated thin films. In the former films, fluorescence quenching of the p-6P was accompanied by appearance of BP2T fluorescence, which indicated existence of the energy transfer between the donors and the acceptors. The latter films were fabricated by successive depositions of p-6P, MgF₂ and BP2T in which the thickness of the MgF₂ spacer was varied. The energy-transferred acceptor fluorescence was suppressed by the spacer thicker than the Förster distance (∼10 nm).     

Synthesis and photoluminescence of aligned straight silica nanowires on Si substrate

Aligned straight silica nanowires (NWs) have been synthesized on Si wafer by thermal evaporation of mixed powders of zinc carbonate hydroxide and graphite at 1100 °C and condensation on Si substrate without using any catalyst. The straight silica NWs have diameters ranging from 50 to 100 nm, and lengths of several micrometers, with cone-shaped tips at their ends. High deposition temperature and relatively high SiO_x vapor concentration near the growth substrate would be beneficial to the formation of the aligned straight silica NWs. Different morphologies of silica nanostructures have also been obtained by varying the deposition temperature and the vapor concentration of the SiO_x molecules. Room temperature photoluminescence measurements on the oriented silica NWs show that two green emission bands at 510 and 560 nm, respectively, revealing that the aligned straight silica NWs might have potential applications in the future optoelectronic devices.     

On photoluminescence properties of a-Si:H-based structures

Non-Gaussian photoluminescence peaks observed in a-Si:H-based structures at 6 K are interpreted as a consequence of the presence of different phases in material. Thin films of amorphous silicon deposited on glass substrate have been analyzed.The main aims of the contribution are (i) analysis of numerical data obtained by fitting procedure and (ii) formulation of corresponding conclusions in terms of structural properties of sample. Spectrum of a-Si:H-based samples can be interpreted as superposition of photoluminescence signals arising from two domains with different degrees of structural disordering. By our knowledge this result corresponds to real situation from view of structural properties of amorphous hydrogenated silicon. Under certain circumstances, decomposition of photoluminescence spectrum can give information of geometrical structure of sample.     

Crystalline and photoluminescence characteristics of YVO4:Sm thin films grown by pulsed laser deposition under oxygen pressure

YVO₄:Sm³⁺ films were deposited on Al₂O₃ (0 0 0 1) substrates at various oxygen pressures changing from 13.3 to 46.6 Pa by using the pulsed laser deposition method. The crystallinity and surface morphology of these films were investigated by means of X-ray diffraction (XRD) and atomic force microscopy (AFM), respectively. The XRD pattern confirmed that YVO₄:Sm³⁺ film has zircon structure and the AFM study revealed that the films consist of homogeneous grains ranging from 100 to 400 nm. The room temperature photoluminescence (PL) spectra showed that the emitted radiation was dominated by a reddish-orange emission peak at 602 nm radiating from the transition of (⁴G_5/2→⁶H_7/2). The crystallinity, surface morphology, and photoluminescence spectra of thin-film phosphors were highly dependent on the deposition conditions, in particular, the substrate temperature. The surface roughness and photoluminescence intensity of these films showed similar behavior as a function of oxygen pressure.     

Highly enhanced photoluminescence and X-ray excited luminescence of Li doped Gd2O3:Eu thin films

Transparent Li-doped Gd₂O₃:Eu³⁺ thin-film phosphors were prepared by a modified sol-gel method. The effect of the Li⁺ ions on luminescent properties of the thin film was investigated. The results indicated that incorporation of Li⁺ ions into Gd₂O₃ lattice could result in a remarkable increase on photoluminescence or X-ray excited luminescence, and the strongest emission was observed from Gd_1.84Li_0.08Eu_0.08O_3−δ film, in which the intensity was increased by a factor of 1.9 or 2.3 in comparison with that of Gd_1.92Eu_0.08O₃ film. And it could be achieved the highest intensity for sintering the Gd_1.84Li_0.08Eu_0.08O_3−δ film at 700 °C. Such a temperature is much lower than the typical solid-state reaction temperature for its powder phosphors. This kind of transparent thin-film phosphors may promise for application to micro X-ray imaging system.     

Dependence of photoluminescence from a-Si nanoparticles on the annealing time and exciting wavelength

Thin films of SiO_x having thickness of 0.2 μm and oxygen content x=1.5 or 1.7 are prepared by thermal evaporation of SiO in vacuum. Then some samples are furnace annealed for various times (in the range ) at 770 and 970 K and some others are rapid thermal annealed at 970 K for 30 and 60 s. Photoluminescence (PL) measurements are carried out at room temperature using the 442 nm line of a He-Cd laser and the 488 nm of an Ar laser for excitation. The effect of the annealing conditions and wavelength of the exciting light on the shape of the PL from these films is explored. The deconvolution of the PL spectra measured with the 442 nm line from samples annealed at 770 K for reveals two distinct PL bands peaked at around 2.3 and 2.5 eV, which do not shift appreciably with increasing annealing time. In addition, at longer annealing times, a weak third band is resolved centred in the range 2.0-2.1 eV. It exists in the spectra of all samples annealed at 970 K being more prominent in the samples with x=1.5. The intensity of this band shows different dependences on the annealing time in the films with different initial composition. The results obtained are discussed in terms of radiative recombination via defect states in the SiO_x matrix (the 2.5 eV band) or at the a-Si-SiO_x interface (the 2.3 eV band). The band centred in the 2.0-2.1 eV range is related to recombination in amorphous silicon nanoparticles grown upon annealing.     

Preparation and spectroscopic properties of Nb2O5 nanorods

Nb₂O₅ nanorods have been prepared using water/ethanol media. The samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-visible absorption and photoluminescence spectroscopy. The as-prepared Nb₂O₅ nanorods appeared to be single pseudohexagonal (TT-Nb₂O₅) phase. From the photoluminescence spectrum, two emission bands at 407 and 496 nm, respectively, were observed. The origin of the luminescence was discussed in detail.     

Photoreflectance study of energy level structure of self-assembled InAs/GaAs quantum dots emitting at 1.3 μm

Photoreflectance and photoluminescence measurements were performed on the ensemble of self assembled InAs/GaAs quantum dots designed to emit at 1.3 μm. As many as six QDs-related optical transitions were observed in PR spectra, the energies of which were confirmed by high-excitation PL results. Numerical calculations allowed estimating the average size of the dots, which is larger than for standard InAs/GaAs QDs. This result is in agreement with structural data. Additionally, the energy level structure for such QDs was derived and compared with the electronic structure of standard InAs/GaAs dots. It was shown that the energy level structure of such large dots qualifies them for the active region of a laser emitting at 1.3 μm.     

Effect of MgO on the enhancement of ultraviolet photoluminescence in ZnO

By glycine-nitrate combustion route and followed by 900 °C annealing in air, ZnO-MgO nanocomposite with heterojunction-like structures between ZnO and MgO phase was successfully produced. The ultraviolet photoluminescence band from ZnO is enhanced by the incorporation of MgO, as compared to the pure ZnO synthesized via the similar route. The charge transfer required by electronic equilibrium across the junction creates an electron depletion region in ZnO phase, which greatly changes the electron states of visible emission-related defects, as a result, the band-edge emission is enhanced while the visible emission in ZnO is suppressed. This mechanism may provide an effective way to modify the emission property of nanomaterials.     

Excitonic polaron and phonon assisted photoluminescence of ZnO nanowires

The coupling strength of the radiative transition of hexagonal ZnO nanowires to the longitudinal optic (LO) phonon polarization field is deduced from temperature dependent photoluminescence spectra. An excitonic polaron formation is discussed to explain why the interaction of free excitons with LO phonons in ZnO nanowires is much stronger than that of bound excitons with LO phonons. The strong exciton-phonon coupling in ZnO nanowires affects not only the Haung-Ray S factor but also the FXA-1LO phonon energy spacing, which can be explained by the excitonic polaron formation.     

Room temperature photoluminescence from amorphous silicon nanoparticles in SiOx thin films

Amorphous SiO_x thin films with four different oxygen contents (x=1.15, 1.4, 1.5, and 1.7) have been prepared by thermal evaporation of SiO in vacuum and then annealed at 770 or 970 K in argon for various times ?40 min. The influence of annealing conditions and the initial film composition on photoluminescence (PL) from the annealed films has been explored. Intense room temperature PL has been observed from films with x?1.5, visible with a naked eye. It has been shown that PL spectra of most samples consists of two main bands: (i) a ‘green’ band centered at about 2.3 eV, whose position does not change with annealing conditions and (ii) an ‘orange-red’ band whose maximum moves from 2.1 to 1.7 eV with increasing annealing time and temperature and decreasing initial oxygen content. These observations have been explained assuming recombination via defect states in the SiO_x matrix for the first band and emission from amorphous Si nanoparticles for the second one.     

Crystallinity and morphology dependent luminescence of Li-doped Y2−xGdxO3:Eu thin film phosphors

The influence of lithium doping on the crystallization, the surface morphology, and the luminescent properties of pulsed laser deposited Y_2−xGd_xO₃:Eu³⁺ thin film phosphors was investigated. The crystallinity, the surface morphology, and the photoluminescence (PL) of films depended highly on the Li-doping and the Gd content. The relationship between the crystalline and morphological structures and the luminescent properties was studied, and Li⁺ doping was found to effectively enhance not only the crystallinity but also the luminescent brightness of Y_2−xGd_xO₃:Eu³⁺ thin films. In particular, the incorporation of Li and Gd into the Y₂O₃ lattice could induce remarkable increase in the PL. The highest emission intensity was observed Li-doped Y_1.35Gd_0.6O₃:Eu³⁺ thin films whose brightness was increased by a factor of 4.6 in comparison with that of Li-doped Y₂O₃:Eu³⁺ thin films.     

Luminescent characteristics of CaTiO3:Pr thin films prepared by pulsed laser deposition method with various substrates

CaTiO₃:Pr³⁺ films were deposited on different substrates such as Al₂O₃ (0 0 0 1), Si (1 0 0), MgO (1 0 0), and fused silica using pulsed laser deposition method. The crystallinity and surface morphology of these films were investigated by XRD and SEM measurements. The films grown on the different substrates have different crystallinity and morphology. The FWHM of (2 0 0) peak are 0.18, 0.25, 0.28, and 0.30 for Al₂O₃ (0 0 0 1), Si (1 0 0), MgO (1 0 0), and fused silica, respectively. The grain sizes of phosphors grown on different substrates were estimated by using Scherrer's formula and the maximum crystallite size observed for the thin film grown on Al₂O₃ (0 0 0 1). The room temperature PL spectra exhibit only the red emission peak at 613 nm radiated from the transition of (¹D₂ → ³H₄) and the maximum PL intensity for the films grown on the Al₂O₃ (0 0 0 1) is 1.1, 1.4, and 3.7 times higher than that of the CaTiO₃:Pr³⁺ films grown on MgO (1 0 0), Si (1 0 0), and fused Sillica substrates, respectively. The crystallinity, surface morphology and luminescence spectra of thin-film phosphors were highly dependent on substrates.     

Structural and photoluminescence characters of SnO2:Sb films deposited by RF magnetron sputtering

The Antimony-doped tin oxide (SnO₂:Sb) films have been prepared on glass substrates by RF magnetron sputtering method. The prepared samples are polycrystalline films with rutile structure of pure SnO₂ and have preferred orientation of (1 1 0) direction. XRD measurement did not detect the existence of Sb₂O₃ phase and Sb₂O₅ phase; Sb ions occupy the site of Sn ions and form the substitution doping. An intensive UV-violet luminescence peak near 392 nm is observed at room temperature. Photoluminescence (PL) properties influenced by sputtering power and annealing for the SnO₂:Sb films are investigated in detail and corresponding PL mechanism is discussed.     

Radiative carrier recombination dependent on temperature and well width of InGaN/GaN single quantum well

Photoluminescence (PL) spectra and time-resolved PL are measured from around 10 to 300 K for the InGaN/GaN single quantum wells (SQWs) with well widths of 1.5, 2.5, 4 and 5 nm. For the SQWs with the well widths of 1.5 and 2.5 nm, the peak position of PL exhibits an S-shaped shift with increasing temperature. The radiative recombination time τ_RAD begins to increase at the temperature for the position to change from the red-shift to the blue-shift. The steep increase of τ_RAD is observed beyond the temperature from the blue-shift to the red-shift. For the SQWs with the well widths of 4 and 5 nm, the peak position of PL exhibits a monotonic red-shift. τ_RAD decreases at first and then increases with temperature. It is about 100-times longer in the low temperature region and about 10-times longer at room temperature as compared with those of the SQWs with narrower widths.