Band bending at the Ni/Si(100)-2×1 submonolayer interface

Band bending at the Ni/Si(100)-2×1 interface has been monitored by using Si 2p core level photoemission spectra. Two nickel-induced Si 2p components appear in the initial interaction between Ni and Si(100)-2×1, which is confined at the top surface and the first subsurface layers. At Ni coverage less than 0.0375 ML, Ni atoms prefer the adamantane interstitial sites on the first subsurface, but switch to the pedestal sites on Si dimer rows at higher Ni coverage. The change in the preferred occupation sites of Ni atoms on the Si(100)-2×1 surface strongly affects the amount of band bending shift. The shift towards higher binding energy, when Ni atoms occupy the adamantane interstitial sites, is attributed to metal-induced-gap states. While Ni atoms occupy the pedestal sites, the band bending shift is reduced which is attributed to the passivation of surface states.     

Interaction of copper with sulfur on the sulfur-terminated Si(1 1 1)-(7 × 7) surface

The adsorption of S₂ on the Si(1 1 1)-(7 × 7) surface and the interaction of copper and sulfur on this sulfur-terminated Si(1 1 1) surface have been studied using synchrotron irradiation photoemission spectroscopy and scanning tunneling microscopy. The adsorption of S₂ at room temperature results in the passivation of silicon dangling bonds of Si(1 1 1)-(7 × 7) surface. Excessive sulfur forms S_n species on the surface. Copper atoms deposited at room temperature directly interact with S-adatoms through the formations of Cu-S bonds. Upon annealing the sample at 300 °C, CuS_x nanocrystals were produced on the sulfur-terminated Si(1 1 1) surface.     

Adsorption and thermal decomposition of C60 on Co/Si(111)-7 × 7

We present a study on the adsorption and thermal decomposition of C₆₀ on Co covered Si(111)-7 × 7 using scanning tunneling microscopy and X-ray photoelectron spectroscopy. Co-induced magic clusters grown on Si(111)-7 × 7 are identified as a possible adsorption site where 51 ± 3% of C₆₀ molecules adsorb at room temperature. On Co/Si(111)-7 × 7, C₆₀ molecules start to decompose at 450 °C, and are completely dissociated to form SiC by 720 °C. This temperature is significantly lower than 910 °C at which C₆₀ completely dissociates on clean Si(111)-7 × 7. This is a possible low temperature method for growing crystalline SiC films using C₆₀ as a precursor molecule.     

Oxygen adsorption on a Mo2C(0 0 0 1) surface: Angle-resolved photoemission study

Oxygen adsorption on a C-terminated α-Mo₂C(0 0 0 1) surface has been investigated with Auger electron spectroscopy, low-energy electron diffraction, and angle-resolved photoemission spectroscopy utilizing synchrotron radiation. It is found that the oxygen atoms adsorb on the Mo atoms in the second layer forming a (1 × 1) orthorhombic periodicity. The oxygen adsorption induces a peculiar state around the Fermi level, which is observed at 0.4 eV in the normal-emission spectra. ARPES measurements show that the state is a partially occupied metallic state. The photoionization cross section of the state shows a maximum at the photon energy of 56 eV, which is assigned as originating from the resonance of the Mo 4d photoemission involving Mo 4p → 4d photoexcitation.     

Electronic and geometric structure of methyl oxirane adsorbed on Si(1 0 0)2 × 1

Electronic and geometric properties of the adsorbate-substrate complex formed upon adsorption of methyl oxirane on Si(1 0 0)2 × 1 at room temperature is reported, obtained with synchrotron radiation-induced valence and core-level photoemission. A ring-opening reaction is demonstrated to occur, followed by a five-membered ring formation involving two of the Si surface atoms bound to a surface dimer. Core-level photoemission spectra support the ring-opening reaction and the SiO and SiC bond formation, while from the valence spectra a more extended molecular fragmentation can be ruled out. We discuss the most likely geometry of the five-membered ring.     

Angle-resolved photoemission study of CoSi2 nanofilms grown on Si(111) substrates

We have carried out an angle-resolved photoemission study for CoSi₂ nanofilms grown on the Si(111)-7×7 substrates. The surface of CoSi₂(111) nanofilm changes from the bulk-truncated surface to the surface with additional Si-bilayer by annealing at higher temperature above 825 K. The angle-resolved photoemission spectra of the CoSi₂ nanofilm annealed at 853 K show the spectral features originated from the surface resonance state on the CoSi₂ surface terminated by Si-bilayer. From the detailed photoemission study, we discuss the surface electronic structure in CoSi₂(111) nanofilms grown on Si(111) substrates.     

SR-PES and STM observation of metastable chemisorption state of oxygen on Si(1 1 0)-16 × 2 surface

Initial adsorption of oxygen molecules on the Si(1 1 0)-16 × 2 surface and subsequent modification of the bonding states induced by mild (300 °C) annealing have been studied by synchrotron-radiation photoemission spectroscopy and scanning-tunneling microscopy. It has been shown that upon annealing, the intensity and the energy positions of the Si 2p suboxide components shift towards the values characteristic for the thermal oxide. This indicates the presence of a metastable chemisorption state of oxygen on the Si(1 1 0)-16 × 2 surface.     

Spectroscopic interpretation for Na-induced phase transitions on Na/Si(1 1 1)3 × 1

Na adsorption at room temperature causes the Na/Si(1 1 1)3 × 1 surface with Na coverage of 1/3 monolayer (ML) to transit into the Na/Si(1 1 1)6 × 1 surface at 1/2 ML and sequentially into the Na/Si(1 1 1)3 × 1 surface at 2/3 ML. The phase transition was studied by Si 2p core-level photoemission spectroscopy. The detailed line shape analysis of the Si 2p core-level spectrum of the Na/Si(1 1 1)3 × 1 surface (2/3 ML) is presented and compared to the Na/Si(1 1 1)3 × 1 surface (1/3 ML) which is composed of Si honeycomb chain-channel structures. This suggests that as additional Na atoms form atomic chains resulting in the Na/Si(1 1 1)3 × 1 surface (2/3 ML), the inner atoms of the Si honeycomb chain-channel structure is buckled due to the additional Na atoms.     

Growth of nano-crystalline metal dots on the Si(1 1 1)-7 × 7 surface saturated with C2H5OH

Metal atom on the Si(1 1 1)-7 × 7 surface undergoes migration by hopping among Si-adatom and Si-rest atom. If the hopping migration is prohibited, how change the deposited metals? In this paper, we studied the deposition of metals on the Si(1 1 1)-7 × 7 surface saturated with C₂H₅OH, on which the whole Si-rest atoms are changed to Si-H so that the hoping migration of metals will be prohibited. We found the growth of ca. 5 nm of crystalline dots by the deposition of Sn, Zn and Ag. Interestingly, Ag dots undergo layer-by-layer growth so that the surface is covered with 5 nm size dots with uniform height. When the hopping migration is prohibited, growth of dots is controlled by the kinetics of precursor state atoms instead of the lattice energy relating to lattice matching or strain.     

Configuration of pentacene (C22H14) films on Si(1 0 0)-2 × 1 studied by NEXAFS

Pentacene films on Si(1 0 0)-(2 × 1) surface at 300 K were investigated using near edge X-ray absorption fine structure (NEXAFS) at the carbon K-edge. NEXAFS spectra show that pentacene molecules are chemisorbed on the Si(1 0 0)-(2 × 1) surface for monolayer with flat-laying and predominantly physisorbed on the Si(1 0 0)-(2 × 1) surface for multilayer films with an upright molecular orientation. Absorption angle of pentacene molecules were measured through π^∗ transition. The angles between the double bond and the silicon surface were 35-55°, 65° and 76° at monolayer, 24 and 48 nm pentacene deposited on the Si(1 0 0) surface, respectively. We observed that the intermediate flat-laying phase is favored for monolayer coverage, while the films of molecules standing perpendicular to the Si(1 0 0) surface are favored for multilayer coverage.     

Ab initio calculations of surface structure and electronic properties caused by adsorption of Ca atoms on a Si(1 1 0) surface

The adsorption of Ca metals onto a Si(1 1 0) surface has been theoretically investigated by first-principle total-energy calculations. We employed a local density approximation of the density functional theory as well as a pseudopotential theory to study the atomic and electronic properties of the Ca/Si(1 1 0) structure. The (1×1) and (2×1) surface structures were considered for Ca coverages of 0.5 and 0.25 ML, respectively. It is found that the (1×1) phase is not expected to occur even for rich Ca regime. It was found that Ca adatoms are adsorbed on top of the surface and form a bridge with the uppermost Si atoms. The most stable structure of Ca/Si(1 1 0)-(2×1) surface produces a semiconducting surface band structure with a direct band gap that is slightly smaller than that of the clean surface. We have observed one filled and two empty surface states in the gap region. These empty surface states originated from the uppermost Si dangling bond states and the Ca 4s states. Furthermore, the Ca-Si bonds have an ionic nature with almost complete charge transfer from Ca to the surface Si atoms. The structural parameters of the ground state atomic configuration are detailed and compared with the available results of metal-adsorbed Si(1 1 0) surface, Ca/Si(0 0 1), and Ca/Si(1 1 1) structures.     

Adsorption of 2-butyne on Si(0 0 1) at room temperature: A valence band photoemission study

We present an angle resolved ultraviolet photoemission spectroscopy study of the adsorption of 2-butyne (CH₃-CC-CH₃) on Si(0 0 1)-2 × 1 at room temperature. We recorded valence band photoemission spectra for two azimuthal positions of a vicinal silicon surface, where all the rows formed by the surface silicon dimers are parallel. The photoemission symmetry selection rules allow the determination of the orientation of the molecular orbitals. The photoemission signal of the HOMO is enhanced when the electric field is parallel to the dimer rows. This showed that the π orbital left intact after the cyclo-addition reaction of the molecule with one silicon dimer is parallel to the dimer rows. This indicates that each 2-butyne molecule adsorbs on one silicon dimer. In spite of the size of the system and the vicinity of the orbitals, the angle resolved study points out that no dispersion of the electronic bands occurs. Not all the surface dimers are reacted so some disorder still exists on the surface preventing the formation of Bloch states.     

Growth mode and novel structure of ultra-thin KCl layers on the Si(1 0 0)-2 × 1 surface

This study investigates ultra-thin potassium chloride (KCl) films on the Si(1 0 0)-2 × 1 surfaces at near room temperature. The atomic structure and growth mode of this ionic solid film on the covalent bonded semiconductor surface is examined by synchrotron radiation core level photoemission, scanning tunneling microscopy and ab initio calculations. The Si 2p, K 3p and Cl 2p core level spectra together indicate that adsorbed KCl molecules at submonolayer coverage partially dissociate and that KCl overlayers above one monolayer (ML) have similar features in the valance band density of states as those of the bulk KCl crystal. STM results reveal a novel c(4 × 4) structure at 1 ML coverage. Ab initio calculations show that a model that comprises a periodic pyramidal geometry is consistent with experimental results.     

Low reactivity of molecular oxygen with Si(1 1 1)-c(2 × 8)

The adsorption of molecular oxygen on the c(2 × 8) reconstruction of quenched Si(1 1 1) surfaces has been studied at the atomic scale using scanning tunneling microscopy (STM) at room temperature (RT). It has been found that clean well reconstructed c(2 × 8) adatoms do not react with O₂ molecules but that a limited oxidation can start where adatom sites arranged in reconstructed structures are present. Comparison between O₂ adsorption on Si(1 1 1)-c(2 × 8) and Si(1 1 1)-7 × 7 reconstructions coexisting on the same quenched silicon surface has been carried out in detail. For each atomic site present on the surface the variation of reacted sites with exposure has been measured. For low O₂ exposures, bright and dark oxygen induced sites appear on the Si(1 1 1)-7 × 7, while Si(1 1 1)-c(2 × 8) does not oxidized at all. At high O₂ exposures, large oxidation areas have spread on the 7 × 7 reconstruction, preferentially on the faulted halves of the unit cell, and smaller oxidation areas induced by topological defects have grown all around clean un-reacted c(2 × 8) regions.     

Unoccupied band dispersion of Si(1 1 1):√3 × √3-Ag surface studied by time- and angle-resolved two-photon photoemission spectroscopy

Band dispersion and transient population of unoccupied electronic states on Si(1 1 1):√3 × √3-Ag surface have been studied by time-resolved (TR) and angle-resolved (AR) two-photon photoemission (2PPE) spectroscopy. The band dispersions originating from unoccupied electronic states have been identified from the comparison between AR-2PPE spectra and angle-resolved one-photon photoemission spectra with synchrotron radiation. A lifetime of unoccupied surface state has been determined from the TR-2PPE spectra.     

Investigation of 1,1-dichloroethene interacting with the Si(1 1 1)-7 × 7 surface studied by scanning tunneling microscopy

Adsorption of 1,1-dichloroethene (1,1-DCE) at the Si(1 1 1)-7 × 7 surface has been investigated using scanning tunneling microscopy. 1,1-DCE dissociates upon adsorption by breaking one or both CCl bonds. The appearance of reacted adatoms in the 7 × 7 reconstruction is found to vary for both positive and negative sample bias voltages in the range of 0.8 V to 2.5 V. Dissociated Cl atoms bond to adatom sites and appear bright for bias voltages higher than ±1.4 V. The other dissociated species appear dark for bias voltages below ±1.85 V with a preference of 2:1 for bonding to center relative to corner adatom sites. The faulted half unit cell is preferred. It is demonstrated that rest atoms are active in the dissociation of two-thirds of the 1,1-DCE molecules.     

Giant fullerenes formed on C60 films irradiated with electrons field-emitted from scanning tunneling microscope tips

It has been found that spherical large clusters of carbon atoms are formed by irradiation of crystalline C₆₀ films grown on Si(1 1 1)-(7 × 7) surfaces with electrons field-emitted from a scanning tunneling microscope probe tip. The size distribution of the clusters deduced from surface profile measurements suggests that the dominant clusters were not necessarily C_60n (n = 2-4) expected from the simple fusion of C₆₀ molecules. It was proposed that electronic excitations of C₆₀ molecules caused the fragment and coalescence of the molecules to form the giant fullerenes as in the photo-induced similar effects.     

Core level photoemission and STM characterization of Ta/Si(1 1 1)-7 × 7 interfaces

We present the results of scanning tunneling microscopy (STM) and photoemission spectroscopy (PES) of the Ta/Si(1 1 1)-7 × 7 system after deposition of Ta at substrate temperatures from 300 to 1250 K. The coverage of Ta varied from 0.05 up to 2.5 of a monolayer (ML). STM shows that at 300 K and coverage less than 1 ML, a disordered chemisorbed phase is formed. Deposition on a hot surface (above 500 K) produces round 3D clusters randomly distributed on the surface. Cluster height and their diameter are found to change drastically with annealing temperature and the Ta coverage. Analysis of photoemission data of the Si 2p core levels shows that at room temperature and at coverage ?1 ML core level binding energy shifts and intensity variations of Si surface related components are observed, which clearly indicate that the reaction starts already at 300 K. Shifts in the binding energy, changes of the peak shapes and intensity of the Ta 4f doublet at higher temperatures can be explained by the formation of stable silicide on the surface.     

Surface electronic structure of the (3 × 2) reconstruction induced by Yb on a Si(1 1 1) surface

We have investigated the electronic structure of the Yb/Si(1 1 1)-(3 × 2) surface using angle-resolved photoelectron spectroscopy. Five surface states have been identified in the gap of the bulk band projection. Among these five surface state, the dispersions of three of them agree well with those of the surface states of monovalent atom adsorbed Si(1 1 1)-(3 × 1) surfaces. The dispersions of the two other surface states agree well with those observed on the Ca/Si(1 1 1)-(3 × 2) surface, whose basic structure is the same as that of monovalent atom adsorbed Si(1 1 1)-(3 × 1) surfaces. Taking these results into account, we conclude that the five surface states observed in the band gap originate from the orbitals of Si atoms that form a honeycomb-chain-channel structure.     

Theoretical studies of the structure of C2H2 adsorbed on Si(0 0 1)

The carbon 1s near-edge X-ray absorption fine structure (NEXAFS) spectra of the acetylene (C₂H₂) at 1 ML coverage adsorbed on the Si(0 0 1)-(2 × 1) surface at room temperature have been investigated by multiple-scattering cluster (MSC). The MSC result shows that the correct adsorption model of C₂H₂/Si(0 0 1)-(2 × 1) is unique, i.e. the dimerized structure with two domains, (2 × 1) and (1 × 2).