Ionic conductivity of NTE materials c- Zr1−xErxW2O8−x/2

It is found that the c- Zr_1−xEr_xW₂O_8−x/2 solid solutions which are well known to have isotropic NTE properties clearly exhibit oxygen-ionic conductance and their ionic conductivities are measured to be about 10⁻⁴ S cm⁻¹ at 673 K, which is comparable to that of ceria-based solid electrolytes.     

Luminescent properties of HTP AgGd1−xW2O8:Eux and AgGd1−x(W1−yMoy)2O8:Eux phosphor for white LED

Intense red phosphors, AgGd_1−xEu_x(W_1−yMo_y)₂O₈ (x=0.0-1.0, y=0.0-1.0), have been synthesized through traditional solid-state reaction and characterized by X-ray diffraction (XRD) and photoluminescence (PL). XRD results reveal that AgGd_1−xEu_xW₂O₈ synthesized at 1000 °C has a tetragonal crystal structure, which is named as high temperature phase (HTP) AgGdW₂O₈. All phosphors compositions with Eu³⁺ show red and green emission on excitation either in the charge-transfer or Eu³⁺ levels. Analysis of the emission spectra with different Eu³⁺ concentrations reveal that the optimum dopant concentration for Eu³⁺ is x=0.6 in the HTP AgGd_1−xEu_xW₂O₈ (x=0.0-1.0). Studies on the AgGd_0.4Eu_0.6(W_1−yMo_y)₂O₈ (y=0.0-1.0) and AgGd_1−xEu_x(W_0.7Mo_0.3)₂O₈ (x=0.0-1.0) show that the emission intensity is maximum for compositions with y=0.3 and x=0.5, respectively, and a decrease in emission intensity is observed for higher y or x values. The Mo⁶⁺ and Eu³⁺ co-doped AgGd(WO₄)₂ phosphors show higher emission intensity in comparison with the singly Eu³⁺-doped AgGd(WO₄)₂ in UV region. The intense emission of the tungstate/molybdate phosphors under 394 and 465 nm excitations, respectively, suggests that these materials are promising candidates as red-emitting phosphors for near-UV/blue GaN-based white LED for white light generation.     

Low temperature magnetic behaviour of (V2−yWy)O5 solid solutions

The thermal variation of the magnetic susceptibility of (V_2-yW_y)O₅ solid solutions is analysed between 2.5 and 220°K. We determine the number of paramagnetic V⁴⁺ centers induced by the presence of W⁶⁺ ions. The ratio between the number of V⁴⁺ and W⁶⁺ ions is a function of the composition, decreasing with y. Finally, this behaviour is discussed.     

Structure, transport and magnetic properties in La2xSr2−2xCo2xRu2−2xO6

The perovskite solid solutions of the type La_2xSr_2−2xCo_2xRu_2−2xO₆ with 0.25≤x≤0.75 have been investigated for their structural, magnetic and transport properties. All the compounds crystallize in double perovskite structure. The magnetization measurements indicate a complex magnetic ground state with strong competition between ferromagnetic and antiferromagnetic interactions. Resistivity of the compounds is in confirmation with hopping conduction behaviour though differences are noted especially for x=0.4 and 0.6. Most importantly, low field (50 Oe) magnetization measurements display negative magnetization during the zero field cooled cycle. X-ray photoelectron spectroscopy measurements indicate the presence of Co²⁺/Co³⁺ and Ru⁴⁺/Ru⁵⁺ redox couples in all compositions except x=0.5. Presence of magnetic ions like Ru⁴⁺ and Co³⁺ gives rise to additional ferromagnetic (Ru-rich) and antiferromagnetic sublattices and also explains the observed negative magnetization.     

The great potential of coupled substitutions in In2O3 for the generation of bixbyite-type transparent conducting oxides, In2−2xMxSnxO3

The study of coupled substitution of In³⁺ by Sn⁴⁺/M²⁺ species in In₂O₃ has allowed In_2−2xSn_xM_xO₃ solid solutions with bixbyite structure to be synthesized for M=Ni, Mg, Zn, Cu and Ca. The latter exhibit a rather broad homogeneity range and are characterized by an ordered cationic distribution. More importantly, these novel oxides are transparent conductors, and among them the Zn and Cu phases show a great potential, since one observes a semi-metallic behavior with conductivity up to 3×10² and 3×10³ (Ω cm)⁻¹, respectively, to be compared to 2×10³ (Ω cm)⁻¹ for reduced ITO. Moreover, in contrast to the latter no reducing conditions are required for reaching such performances.     

Structural and Magnetic Properties of NiFe2−2xSnxCuxO4

The substituted nickel ferrite (NiFe_2−2xSn_xCu_xO₄, x=0, 0.1, 0.2, 0.3) was prepared by the conventional ceramic method. The effect of substitution of Fe³⁺ ions by Sn⁴⁺ and Cu²⁺ cations on the structural and magnetic properties of the ferrite was studied by means of ⁵⁷Fe Mössbauer spectroscopy, alternating gradient force magnetometry (AGFM) and Faraday balance. Whereas undoped NiFe₂O₄ adopts a fully inverse spinel structure of the type (Fe)[NiFe]O₄, Sn⁴⁺ and Cu²⁺ cations tend to occupy octahedral positions in the structure of the substituted ferrite. Based on the results of Mössbauer spectroscopic measurements, the crystal-chemical formula of the substituted ferrite may be written as (Fe)[NiFe_1−2xSn_xCu_x]O₄, where parentheses and square brackets enclose cations in tetrahedral (A) and octahedral [B] coordination, respectively. The Néel temperature and the saturation magnetization values of the NiFe_2−2xSn_xCu_xO₄ samples were found to decrease with increasing degree of substitution (x). The variation of the saturation magnetization with x measured using the AGFM method and that calculated on the basis of the Mössbauer spectroscopic measurements are in qualitative agreement.     

Crystal structure and photoluminescence of (Y1−xCex)2Si3O3N4

Oxonitridosilicate phosphors with compositions of (Y_1−xCe_x)₂Si₃O₃N₄ (x=0−0.2) have been synthesized by solid state reaction method. The structures and photoluminescence properties have been investigated. Ce³⁺ ions have substituted for Y³⁺ ions in the lattice. The emission and excitation spectra of these phosphors show the characteristic photoluminescence spectra of Ce³⁺ ions. Based on the analyses of the diffuse reflection spectra and the PL spectra, a systematic energy diagram of Ce³⁺ ion in the forbidden band of sample with x=0.02 is given. The best doping Ce content in these phosphors is ∼2 mol%. The quenching temperature is ∼405 K for the 2 mol% Ce content sample. The luminescence decay properties were investigated. The primary studies indicate that these phosphors are potential candidates for application in three-phosphor-converted white LEDs.     

High-temperature electrical properties of magnesiowustite Mg1 − xFexO and spinel Fe3 − x − yMgxCryO4 ceramics

Phase relationships, thermal expansion and electrical properties of Mg_1 − xFe_xO (x = 0.1-0.45) cubic solid solutions and Fe_{3 − x − y}Mg_xCr_yO_4 ± δ (x = 0.7-0.95; y = 0 or 0.5) spinels were studied at 300-1770 K in the oxygen partial pressure range from 10 Pa to 21 kPa. Increasing iron content enlarges the spinel phase stability domain at reduced oxygen pressures and elevated temperatures. The total conductivity of the spinel ceramics is predominantly n-type electronic and is essentially p(O₂)-independent within the stability domain. The computer simulations using molecular dynamics technique confirmed that overall level of ion diffusion remains low even at high temperatures close to the melting point. Temperature dependencies of the total conductivity in air exhibit a complex behavior associated with changing the dominant defect-chemistry mechanism from prevailing formation of the interstitial cations above 1370-1470 K to the generation of cation vacancies at lower temperatures, and with kinetically frozen cation redistribution in spinel lattice below 700-800 K. The average thermal expansion coefficients of the spinel ceramics calculated from dilatometric data in air vary in the range (9.6-10.0) × 10^− 6 K^− 1 at 300-500 K and (13.2-16.1) × 10^− 6 K^− 1 at 1050-1370 K. Mg_1 − xFe_xO solid solutions undergo partial decomposition on heating under oxidizing and mildly reducing conditions, resulting in the segregation of spinel phase and conductivity decrease.     

Ferromagnetism of epitaxially grown CaRu1−xMxO3 (M=Ti, Mn) films

Epitaxial thin films of CaRu_1−xM_xO₃ (M=Ti, Mn) were fabricated on a (0 0 1)-SrTiO₃ substrate by spin-coat method using organometallic solutions (metal alkoxides). Results of X-ray diffraction and transmission electron microscopy indicate that the epitaxial films were grown pseudomorphically so as to align the [0 0 l] axis of the CaRu_1−xM_xO₃ films perpendicular to the (0 0 1) plane of the SrTiO₃ substrate. Ferromagnetism and metal-insulator transition are induced by the substitution of transition metal ions. The occurrence of ferromagnetism was explained qualitatively assuming a TiRu₆ cluster model for CaRu_1−xTi_xO₃ film and a mixed valence model for CaRu_1−xMn_xO₃ film. Ferromagnetism was also observed for layered CaRuO₃/CaMnO₃ film and CaRuO₃/CaMnO₃/CaRuO₃/CaMnO₃ multilayer film and the magnetism was explained by an interfacial exchange interaction model with magnetic Mn³⁺, Mn⁴⁺, and Ru⁵⁺ ions.     

Chemical vapor deposition of ZrxTi1−xO2 and HfxTi1−xO2 thin films using the composite anhydrous nitrate precursors

Zr-Ti and Hf-Ti composite nitrates were successfully developed as single-source precursors for the chemical vapor deposition (CVD) of Zr_xTi_1−xO₂ and Hf_xTi_1−xO₂ thin films. The Zr-Ti nitrate can be assumed as a solid solution of the individual Zr and Ti nitrates, and the Zr/Ti molar ratio in the deposited Zr_xTi_1−xO₂ films is consistent with that in the precursor. The Hf-Ti nitrate appears to be a mixture of the Hf and Ti nitrates and the composition of the deposited Hf_xTi_1−xO₂ films depends remarkably on the heating time of precursor. Both Zr_xTi_1−xO₂ and Hf_xTi_1−xO₂ films exhibit trade-off properties between band gap and dielectric constant. The obtained results suggest that Zr_xTi_1−xO₂ and Hf_xTi_1−xO₂ films are promising candidates for gate dielectric application to improve the scalability and reduce the leakage current of the future complementary metal-oxide-semiconductor (CMOS) devices.     

High temperature ferromagnetism of the vacuum-annealed (In1−xFex)2O3 powders

(In_1−xFe_x)₂O₃ (x = 0.02, 0.05, 0.2) powders were prepared by a solid state reaction method and a vacuum annealing process. A systematic study was done on the structural and magnetic properties of (In_1−xFe_x)₂O₃ powders as a function of Fe concentration and annealing temperature. The X-ray diffraction and high-resolution transmission electron microscopy results confirmed that there were not any Fe or Fe oxide secondary phases in vacuum-annealed (In_1−xFe_x)₂O₃ samples and the Fe element was incorporated into the indium oxide lattice by substituting the position of indium atoms. The X-ray photoelectron spectroscopy revealed that both Fe²⁺ and Fe³⁺ ions existed in the samples. Magnetic measurements indicated that all samples were ferromagnetic with the magnetic moment of 0.49-1.73 μ_B/Fe and the Curie temperature around 783 K. The appearance of ferromagnetism was attributed to the ferromagnetic coupling of Fe²⁺ and Fe³⁺ ions via an electron trapped in a bridging oxygen vacancy.     

Raman characterization of Pb2Na1−xLaxNb5−xFexO15 and Pb0.5(5−x)LaxNb5−xFexO15 (0≤x≤1) solid solutions

The ferroelectric compounds Pb₂Na_1−xLa_xNb_5−xFe_xO₁₅ and Pb_0.5(5−x)La_xNb_5−xFe_xO₁₅ (0≤x≤1) with the tungsten bronze type structure have been investigated using Raman spectroscopy. The evolution of the spectra as a function of composition at room temperature is reported. In the frequency range 200-1000 cm⁻¹ three main A₁ phonons around 240 (υ₁), 630 (υ₂) and 816 (υ₃) cm⁻¹ were observed. The broadening of the Raman lines for high values of x originates from a significant structural disorder. This is in good agreement with the relaxor character of these compositions. The lowest-frequency part of the spectra, below 180 cm⁻¹, reveals a structural change in the studied solid solutions. The behaviour of the Raman shift of the υ₁ mode confirms that in Pb₂Na_1−xLa_xNb_5−xFe_xO₁₅, a clear anomaly occurs in the vicinity of x=0.4.     

Evolution des proprietes de transport des solutions solides M1−xM′xF2+x (M=Sr,Pb; M′=Sb,Bi) ET M1−xM″xF2+2x (M″=Zr,Th) pour les faibles taux de substitution

A detailed study of the transport properties of the solid solutions M_1?xM′_xF_2+x (M=Sr, Pb; M′=Sb, Bi) and M_1?xM″_xF_2+2x (M″=Zr, Th) has been carried out for x<0.10. Contrary to solid solutions of strontium, solid solutions of lead show for a very small value of x (x = 0.10 forPb_1?xM′_xF_2+x, x = 0.005 for Pb_1?xM″'_xF_2+2x) a minimum of conductivity associated with a maximum of activation energy. Hypotheses are proposed to explain the results.     

Microstructure characterization and magnetic behavior of NiAlxFe2−xO4 and Ni1−yMnyAl0.2Fe1.8O4 ferrites

NiAl_xFe_2−xO₄ and Ni_1−yMn_yAl_0.2Fe_1.8O₄ ferrites were prepared by the conventional ceramic method and were characterized by X-ray diffraction, scanning electron microscopy, and magnetic measurements. The single spinel phase was confirmed for all prepared samples. A proper explanation of data is possible if the Al³⁺ ions are assumed to replace Fe³⁺ ions in the A and B sites simultaneously for NiAl_xFe_2−xO₄ ferrites, and if the Mn²⁺ ions are assumed to replace Ni²⁺ ions in the B sites for Ni_1−yMn_yAl_0.2Fe_1.8O₄ ferrites. Microstructural factors play an important role in the magnetic behavior of Ni_1−yMn_yAl_0.2Fe_1.8O₄ ferrites with large Mn²⁺ content.     

Electrical conductivity of (Er,U)O2+x and (Ce,U)O2+x

The electrical conductivity (σ) of (Er_yU_1−y)O_2+x (y=0.06, 0.20) and (Ce_yU_1−y)O_2+x (y=0.05, 0.15, 0.25) has been measured as a function of oxygen partial pressure in the temperature range of 1100≤T/°C≤1300 by a d.c. 4-probe method. Both of the oxides exhibited Po₂-regions where the electrical conductivity is independent of oxygen partial pressure, which indicates that doped Er and Ce exist as trivalent cations on uranium sites and fix the hole concentration by acting as electron acceptors, i.e. [h]=[Er′_U] and [h]=[Ce′_U], respectively. It is considered that strong oxidization tendency of uranium and reduction tendency of cerium simultaneously render the cerium ions exist exclusively as Ce³⁺ in the uranium dioxide. The electron-hole mobility of (Er_yU_1−y)O_2+x and (Ce_yU_1−y)O_2+x in the Po₂ region where σ is constant has been calculated by the combination of the electrical conductivity and charge carrier concentration; the activation energy (E_H) of each oxide has been obtained from the temperature dependence of the mobility. Small polaron hopping conduction mechanism was confirmed by small magnitude of the mobility (0.018-0.052 cm² V⁻¹ s⁻¹) and the activation energy (0.12-0.22 eV).     

Composition stability limits for the rocksalt-structure phase (Pb1−ySny)1−xTex from lattice parameter measurements

The lattice parameters at 25°C have been measured on powders with a precision of one part in 3(10⁴) for (Pb_1−ySn_y)_1−xTe_x for y = 1·0, 0·90, 0·80,and0·00 and values of x both without and, for the first threey-values, within the composition stability range. For the first threey-values, the composition stability limits for samples metal-saturated at 400°C is 0·5000 ± 0·0002, while those for samples Te-saturated at 356°C is x = 0·5070fory = 1·0, x = 0·5056fory = 0·90,andx = 0·5038fory = 0·80. The fine powders pick up oxygen quickly in air, which reacts with the Pb and Sn upon heating to deplete the telluride solid-solution of metal and consequently reduce its parameter by 2–3(10⁻³)Å. The metals are substantially all returned to the telluride phase upon H₂-reduction at 500–600°C. The present results for SnTe are used to extend the sources of data used in an analysis of SnTe. This analysis shows that the ratio of the number of valence band holes per Sn-vacancy, c, to the 77°K Hall factor, r, is 3·2 ± 0·3 over the entire range of 3(10¹⁹) to 1·8(10²¹) cm⁻³ in the apparent hole concentration. The results for the solid solutions are extrapolated to give the atomic fraction of Te in the 356°C, Te-saturated solid solution for y < 0·8. Comparison with the electrical measurements of others gives c/r equal to about unity for y = 0·27and0·13.     

Structure and magnetic properties of Ca1−x−yMgxCu2+yO3 influenced by isoelectronic substitution x

Phases of the composition Ca_1−x−yMg_xCu_2+yO₃ have been prepared for the first time. The compounds are isostructural with the known end-members CaCu₂O₃ and MgCu₂O₃ showing a two-leg spin-ladder-like connection of copper and oxygen atoms within the Cu₂O₃-layer. Opposite the spin ladders this layer is folded, which results in a long-range antiferromagnetic ordering of these phases. The Néel temperature can be adapted by variation of x in Ca_1−x−yMg_xCu_2+yO₃ between 24 and 80 K. Several structural features, which influence the magnetic ordering, are discussed.     

Urbach rule and disordering processes in Cu6P(S1−xSex)5Br1−yIy superionic conductors

Compositional behavior of Urbach absorption edge is studied as well as the effect of compositional disordering on the parameters of exciton-phonon interaction, phase transition temperatures and electric conductivity in Cu₆P(S_1−xSe_x)₅Br_1−yI_y superionic solid solutions. The effect of different types of disordering on the optical absorption processes and specific features of compositional changes in the absorption edge spectra under S→Se and Br→I anion substitution in the mixed crystals are investigated. (x, T) phase diagrams for Cu₆P(S_1−xSe_x)₅X (X=I, Br) solid solutions are studied.     

Superconductivity and magnetism of La2Cu1−xZnxO4+δ chemically oxidized by NaClO

The structural, superconducting and magnetic properties of La₂Cu_1−xZn_xO_4+δ (0≤x≤0.1) chemically oxidized by NaClO at room temperature were studied. All the samples before and after oxidation are single phase with orthorhombic structure, as indicated by their powder X-ray diffraction analysis. The iodometric titration results indicate that Zn-substituted La₂Cu_1−xZn_xO₄ is more favorable for the insertion of the excess oxygen, as compared to the Zn-free La₂CuO₄. The T_c suppression rate resulting from Zn substitution in La₂Cu_1−xZn_xO_4+δ is −12.4 K/%. The effective magnetic moment induced by the non-magnetic Zn ion is the order of one Bohr magneton, which decreases with increasing the Zn concentrations in the range examined. The latter two results are qualitatively well consistent with those obtained in La_2−xSr_xCu_1−yZn_yO₄ with the Sr optimal doping. This reveals that the non-magnetic Zn ions play the same role in both of the La₂Cu_1−xZn_xO_4+δ with the excess oxygen content of about 0.1 and the La_2−xSr_xCu_1−yZn_yO₄ with the Sr optimal doping.     

Electric quadrupole interaction of Cd in (Ce1−xLax)Ru2 and (Ce1−yCay)Ru2 synthesized at high pressure

Quasibinary Laves systems (Ce_1−xLa_x)Ru₂ and (Ce_1−yCa_y)Ru₂ doped with ¹¹¹In were synthesized at a pressure of 8 GPa, and variations of the electric quadrupole interaction of ¹¹¹Cd at the Ru sites have been studied by the method of time-differential perturbed angular correlation in a wide range of Ce-La and Ce-Ca relative concentrations. In the first case two sites with quadrupole frequencies ν_Q≅220 and 150 MHz persist at x≤0.2, while at x≥0.3 only the higher frequency component remains in the spectra, which are similar to that of pure LaRu₂. In the series (Ce_1−yCa_y)Ru₂, at y≥0.03 the lower frequency component was washed out except in samples with y=0.1 and 0.2, where it was restored.