Luminescence properties of LiPrxCe1−xP4O12

LiPr_1−xCe_xP₄O₁₂ (x=0, 0.002, 0.02; 0.1) powder samples were prepared using the melt solution technique. Luminescent parameters of LiPr_1−xCe_xP₄O₁₂ phosphors have been investigated under ultraviolet-vacuum ultraviolet (3-12 eV) synchrotron radiation and X-rays excitation at room and near liquid He temperatures. Excitation luminescence spectra of Ce³⁺ emission, luminescent spectra and decay curves from the lower excited state levels of the 4f¹5d¹ and 5d¹ electronic configuration of the Pr³⁺ and Ce³⁺, respectively, clearly indicate energy transfer from Pr³⁺ to Ce³⁺. Energy migration proceeds via the Pr-sublattice followed by nonradiation transfer from Pr³⁺ to Ce³⁺ ions.     

Effect of interface states associated with transitional nanophase precipitates in the enhancement of red emission from SrAl12O19:Pr by Ti incorporation

SrAl₁₂O₁₉:Pr³⁺, Ti⁴⁺ phosphor suitable for field emission displays is prepared by the wet chemical gel-carbonate method and the mechanism of enhancement in red photoluminescence (PL) intensity with Ti⁴⁺ therein has been investigated. The PL spectra of Pr³⁺ show both ¹D₂-³H₄ and ³P₀-³H₆ emission in the red region with very weak intensity when excited at 355 nm. The emission intensity has increased by about 100 times at room temperature in the compositional range SrAl_12−xTi_xO_19+x/2:Pr³⁺, with 0.1≤x≤0.3 in comparison to Ti-free SrAl₁₂O₁₉:Pr³⁺. TEM investigations show the presence of exsolved nanophase of SrAl₈Ti₃O₁₉, the precipitation of which is preceded by the presence of defect centers at the interfacial regions between the semicoherent transient phase and the parent SrAl₁₂O₁₉ matrix. The presence of transitional nanophase and the associated defects modify the excitation-emission process by way of formation of electronic sub-levels at lower energy (3.5 eV) than the band gap of SrAl₁₂O₁₉ (∼7 eV) followed by non-resonance energy transfer to Pr³⁺ level, leading to magnetic-dipole related red emission with enhanced intensity. The PL intensity of Pr³⁺ decreases at high Ti⁴⁺ concentrations (x>0.3) due to higher extent of segregation of non-emissive SrAl₈Ti₃O₁₉:Pr³⁺ phase.     

Photoluminescence properties of Sr1-xSi2O2N2: Eux as green to yellow-emitting phosphor for blue pumped white LEDs

This study evaluated potential applications of green to yellow-emitting phosphors (Sr_1−xSi₂O₂N₂: Eu²⁺_x) in blue pumped white light emitting diodes. Sr_1-xSi₂O₂N₂: Eu²⁺_x was synthesized at different Eu²⁺ doping concentrations at 1450 °C for 5 h under a reducing nitrogen atmosphere containing 5% H₂ using a conventional solid reaction method. The X-ray diffraction patterns of the prepared phosphor (Sr_1-xSi₂O₂N₂: Eu²⁺_x) were indexed to the SrSi₂O₂N₂ phase and an unknown intermediate phase. The photoluminescence properties of these phosphors (Sr_1−xSi₂O₂N₂: Eu²⁺_x) showed that the samples were excited from the UV to visible region due to the strong crystal field splitting of the Eu²⁺ ion. The emission spectra under excitation of 450 nm showed a bright color at 545-561 nm. The emission intensity increased gradually with increasing Eu²⁺ doping concentration ratio from 0.05 to 0.15. However, the emission intensity decreased suddenly when the Eu²⁺ concentration ratio was >0.2. As the doping concentration of Eu²⁺ was increased, there was a red shift in the continuous emission peak. These results suggest that Sr_1-xSi₂O₂N₂: Eu₂⁺_x phosphor can be used in blue-pumped white light emitting diodes.     

The structure and luminescence properties of a novel orange emitting phosphor Y3MnxAl5−2xSixO12

A series of phosphors with the composition Y₃Mn_xAl_5−2xSi_xO₁₂ (x=0, 0.05, 0.1, 0.15, 0.2, 0.3, 0.4, 0.5, 0.6) was prepared through solid state reactions. X-ray powder diffraction analysis of samples shows that when co-doping content does not exceed 16% of Al³⁺, equimolar co-doping of Mn²⁺ and Si⁴⁺ does not change the garnet structure of phosphors, but makes the interplanar distance to decrease a certain extent. However, if the co-doping content exceeds 16%, new phases will form in the samples. The excitation and emission spectra of samples show that Mn²⁺ in Y₃Mn_xAl_5−2xSi_xO₁₂ emits broadband orange light (peak wavelength varies from 586 to 593 nm). With an increment in co-doping content, the emission intensity of the phosphors increases when the value of x is lower than 0.1 while it decreases when it is higher than 0.1 and the emission peak moves to a longer wavelength.     

The structure and luminescence properties of long afterglow phosphor Y3−xMnxAl5−xSixO12

A series of phosphors with the composition Y_3−xMn_xAl_5−xSi_xO₁₂ (x=0, 0.025, 0.050, 0.075, 0.150, 0.225, 0.300) were prepared with solid state reactions. The X-ray powder diffraction analysis of samples shows that the substitution of Mn²⁺ and Si⁴⁺ does not change the garnet structure of phosphors, but makes the interplanar distance decrease to a certain extent. The emission spectra show that Mn²⁺ in Y₃Al₅O₁₂ emits yellow-orange light in a broad band. With the increment of substitution content, the emission intensity of the phosphors increases firstly then decreases subsequently, and the emission peak moves to longer wavelength. Afterglow spectra and decay curves show that all the Mn²⁺ and Si⁴⁺ co-doped samples emit yellow-orange light with long afterglow after the irradiation of ultraviolet light. The longest afterglow time is 18 min. Thermoluminescence measurement shows that there exist two kinds of traps with different depth of energy level and their depth decreases with the increment of substitution content.     

Combustion synthesis and luminescence properties of NaY1−xEux(WO4)2 phosphors

The red phosphors NaY_1−xEu_x(WO₄)₂ with different concentrations of Eu³⁺ were synthesized via the combustion synthesis method. As a comparison, NaEu(WO₄)₂ was prepared by the solid-state reaction method. The phase composition and optical properties of as-synthesized samples were studied by X-ray powder diffraction and photoluminescence spectra. The results show that the red light emission intensity of the combustion synthesized samples under 394 nm excitation increases with increase in Eu³⁺ concentrations and calcination temperatures. Without Y ions doping, the emission spectra intensity of the NaEu(WO₄)₂ phosphor prepared by the combustion method fired at 900 °C is higher than that prepared by the solid-state reaction at 1100 °C. NaEu(WO₄)₂ phosphor synthesized by the combustion method at 1100 °C exhibits the strongest red emission under 394 nm excitation and appropriate CIE chromaticity coordinates (x=0.64, y=0.33) close to the NTSC standard value. Thus, its excellent luminescence properties make it a promising phosphor for near UV InGaN chip-based red-emitting LED application.     

Critical current density and flux pinning in La2−xPrxCa2x Ba2Cu4+2xOz (x=0.1-0.5) superconductors

Polycrystalline La_2−xPr_xCa_2xBa₂Cu_4+2xO_z (LPCaBCO) compounds with x=0.1-0.5 were synthesized by solid-state reaction method and studied by room temperature X-ray diffraction, dc resistivity, dc magnetization and iodometry. The superconducting transition temperatures in these tetragonal triple perovskite compounds increases from 32 to 62 K (T_c^onset values) with increasing dopant concentration. The mixing of rare earth La³⁺ and Pr^3+/4+ ions at rare earth site (La³⁺) along with substitution of divalent Ca²⁺ results in the shrinkage of unit cell volume. The contraction of unit cell volume due to larger ion being substituted by smaller ions, gives rise to creation of pinning centres in the unit cell leading to increase in critical current density and flux pinning.     

Luminescent properties of HTP AgGd1−xW2O8:Eux and AgGd1−x(W1−yMoy)2O8:Eux phosphor for white LED

Intense red phosphors, AgGd_1−xEu_x(W_1−yMo_y)₂O₈ (x=0.0-1.0, y=0.0-1.0), have been synthesized through traditional solid-state reaction and characterized by X-ray diffraction (XRD) and photoluminescence (PL). XRD results reveal that AgGd_1−xEu_xW₂O₈ synthesized at 1000 °C has a tetragonal crystal structure, which is named as high temperature phase (HTP) AgGdW₂O₈. All phosphors compositions with Eu³⁺ show red and green emission on excitation either in the charge-transfer or Eu³⁺ levels. Analysis of the emission spectra with different Eu³⁺ concentrations reveal that the optimum dopant concentration for Eu³⁺ is x=0.6 in the HTP AgGd_1−xEu_xW₂O₈ (x=0.0-1.0). Studies on the AgGd_0.4Eu_0.6(W_1−yMo_y)₂O₈ (y=0.0-1.0) and AgGd_1−xEu_x(W_0.7Mo_0.3)₂O₈ (x=0.0-1.0) show that the emission intensity is maximum for compositions with y=0.3 and x=0.5, respectively, and a decrease in emission intensity is observed for higher y or x values. The Mo⁶⁺ and Eu³⁺ co-doped AgGd(WO₄)₂ phosphors show higher emission intensity in comparison with the singly Eu³⁺-doped AgGd(WO₄)₂ in UV region. The intense emission of the tungstate/molybdate phosphors under 394 and 465 nm excitations, respectively, suggests that these materials are promising candidates as red-emitting phosphors for near-UV/blue GaN-based white LED for white light generation.     

Luminescent properties of stabled hexagonal phase Sr1−xBaxAl2O4:Eu (x=0.37-0.70)

Stabled hexagonal phase Sr_1−xBa_xAl₂O₄:Eu²⁺ (x=0.37-0.70) was prepared by solid-state method. Result revealed that the structure behavior of the SrAl₂O₄:Eu²⁺ calcined at 1350 °C in a reducing atmosphere for 5 h strongly depended on the Ba²⁺ concentration. With increasing Ba²⁺ concentration, a characteristic hexagonal phase can be observed. When 37-70% of the strontium is replaced by barium, the structure of the prepared sample is pure hexagonal. Photoluminescence and excitation spectra of the samples with different x and doped with 2% Eu²⁺ were investigated. Changes in the emission spectra were observed in the two different phases. The green emission at 505 nm from Eu²⁺ was found to be quite strong in the hexagonal phase. The intensity and peak position of the green luminescence from Eu²⁺ changed with increasing content of Ba²⁺. The strongest green emission was obtained from Sr_0.61Ba_0.37Al₂O₄:Eu²⁺. The decay characteristics of Sr_1−xBa_xAl₂O₄:Eu²⁺ (x=0.37-0.70) showed that the life times also varied with the value of x. Furthermore, the emission colors and decay times varying with x could be ascribed to the variation of crystal lattice.     

Crystal structure and photoluminescence of (Y1−xCex)2Si3O3N4

Oxonitridosilicate phosphors with compositions of (Y_1−xCe_x)₂Si₃O₃N₄ (x=0−0.2) have been synthesized by solid state reaction method. The structures and photoluminescence properties have been investigated. Ce³⁺ ions have substituted for Y³⁺ ions in the lattice. The emission and excitation spectra of these phosphors show the characteristic photoluminescence spectra of Ce³⁺ ions. Based on the analyses of the diffuse reflection spectra and the PL spectra, a systematic energy diagram of Ce³⁺ ion in the forbidden band of sample with x=0.02 is given. The best doping Ce content in these phosphors is ∼2 mol%. The quenching temperature is ∼405 K for the 2 mol% Ce content sample. The luminescence decay properties were investigated. The primary studies indicate that these phosphors are potential candidates for application in three-phosphor-converted white LEDs.     

Low-voltage cathodoluminescence property of Li-doped Gd2−xYxO3:Eu

Cathodoluminescent (CL) spectra of Li-doped Gd_2−xY_xO₃:Eu³⁺ solid-solution (0.0?x?0.8) were investigated at low voltages (300 V-1 kV). The CL intensity is maximum for the composition of x=0.2 and gradually reduces with increasing the amount of substituted Y content. In particular, small (∼100 nm) particles of Li-doped Gd_1.8Y_0.2O₃:Eu³⁺ are obtained by firing the citrate precursors at only 650°C for 18 h. Relative red-emission intensity at 300 V of this phosphor is close to 180% in comparison with that of commercial red phosphor Y₂O₃:Eu³⁺. An increase of firing temperature to 900°C results in 400-600 nm sized spherical particles. At low voltages (300-800 V), the CL emission of 100 nm sized particles is much stronger than that of 400-600 nm sized ones. In contrast, the larger particles exhibit the higher CL emission intensity at high voltages (1-10 kV). Taking into consideration small spherical morphology and effective CL emission, Li-doped Gd_1.8Y_0.2O₃:Eu³⁺ appears to be an efficient phosphor material for low voltage field emission display.     

EPR and magnetic properties of vapour phase grown Zn1−xCrxTe crystals

The EPR and magnetic properties were investigated on vapour phase grown Zn_1−xCr_xTe (0.001?x?0.005) crystal samples at room temperature. The EPR spectra were observed for samples with x=0.001, 0.002 only. The simulations of the spectra confirm Cr³⁺ charge state of the dopant ion at tetrahedral symmetry. The magnetic behaviour of the samples with x=0.001 and 0.002 is neither that of Brillouin paramagnets nor Van Vleck systems while the samples with compositions x=0.003, 0.004 and 0.005 exhibited hysteresis behaviour.     

Structural stability and magnetic properties of Bi1−xLa(Pr)xFeO3 solid solutions

In this work, X-ray diffraction data taken on Bi_1−xLa_xFeO₃ solid solutions are used to verify the following structural phase transitions: “polar rhombohedral-antipolar orthorhombic” at x≈0.16 and “commensurate-incommensurate” within the orthorhombic phase at x≈0.18. In contrast, in the Bi_1−xPr_xFeO₃ series, the polar rhombohedral phase transforms into an antipolar orthorhombic one at x≥0.13. The polar rhombohedral phase near the morphotropic phase boundary exhibits an isothermal transformation into an antipolar orthorhombic phase, though the transformation occurs much faster in the case of La-doped compounds. The incommensurate structural phase was not detected in Bi_1−xPr_xFeO₃ solid solutions. The ternary structural phase diagram is constructed for (Bi,La,Pr)FeO₃ systems. In addition, the polar rhombohedral phase exhibits a magnetic field-induced transition from the modulated antiferromagnetic state into a homogeneous weak ferromagnetic state whereas the antipolar phase is a weak ferromagnetic state in the absence of an external field.     

Some studies about the green and red light emitting structures in NaCl1−xBrx:Mn

In this work we present the results obtained from the luminescence spectra and X-ray diffraction as well as transmission electron microscopy, at room temperature on crystals of NaCl_1−xNaBr_x:MnCl₂:0.3% (x=0.00, 0.05, 0.25, and 0.50). The results suggest the existence of structures between the crystal planes (1 1 1) and (2 0 0), which may be associated with different types of Mn²⁺ arrangements, such as dipole complexes, octahedral and rhombohedral structures as well as other possible nanostructures that include mixtures of bromine/chlorine ions. These are responsible for the emission spectra of “as grown” crystals consisting of maxima around 500 nm and 600 nm. The green emission has been usually attributed to rhombohedral/tetrahedral symmetry sites; the present results point out that this is due to Mn–Cl/Br nanostructures with rhombohedral structure. On the other hand when the crystals are thermally quenched from 500 °C to room temperature the structures previously detected present changes. Only a red band appears around 620 nm if the samples are later annealed at 80 °C.     

Luminescent properties of trivalent praseodymium-doped lanthanum aluminum germanate LaAlGe2O7

The luminescent characteristics of Pr³⁺-activated LaAlGe₂O₇ were investigated. In response to excitement using 448 nm blue light, the emission spectra involved most of the ³P₀→³H_J transitions. The dominant emission came from the ³P₀→³H₄ transition at 487 nm. ¹D₂ fluorescence quenching was observed in highly doped samples and is related to the cross-relaxation processes among neighboring Pr³⁺ ions. In contrast with conventional Pr³⁺-activated phosphors, the extraordinary excitation spectra showed only intense f-f transition of Pr³⁺ ions, while the 4f-5d transition was eliminated. This is ascribed to photoionization. By analyzing absorption and excitation spectra, it is recognized that no efficient energy transfer occurs between Pr³⁺ and the host lattice in LaAlGe₂O₇.     

Observation of optical properties related to room-temperature ferromagnetism in co-sputtered Zn1−xCoxO thin films

We report on the analysis of optical transmittance spectra and the resulting ferromagnetic characteristics of sputtered Zn_1−xCo_xO films. Zn_1−xCo_xO films were prepared on (0001)-oriented Al₂O₃ substrates by the radio-frequency (rf) magnetron co-sputtering method. The XRD results showed that the crystallinity of films was properly maintained up to x=0.30 and no second phase peaks were detected up to x=0.40. The transmittance spectra showed both the increase of the absorption band intensity and the red shift of the absorption peak as well as the band edge with increasing x. We have proved experimentally that these changes depend on Co concentration. These optical properties suggest that sp-d exchange interactions and typical d-d transitions become activated with increasing x, which leads to the enhancement of ferromagnetic properties in Zn_1−xCo_xO films as shown in the AGM results. Therefore, it is concluded that the ferromagnetism derives from the substitution of Co²⁺ for Zn²⁺ without changing the wurtzite structure.     

Co-reduction synthesis of new LnxSb2−xS3 (Ln: Nd, Lu, Ho) nanomaterials and investigation of their physical properties

New Ln_xSb_2−xS₃ (Ln: Lu³⁺, Ho³⁺, Nd³⁺)-based nanomaterials were synthesized by a co-reduction method. Powder XRD patterns indicate that the Ln_xSb_2−xS₃ crystals (Ln=Lu³⁺, Ho³⁺, x=0.00−0.1 and Ln=Nd³⁺, x=0.00−0.08) are isostructural with Sb₂S₃. SEM images show that doping of Lu³⁺ and Ho³⁺ ions in the lattice of Sb₂S₃ results in nanorods while that in Nd³⁺ leads to nanoflowers. UV-vis absorption and emission spectroscopy reveal mainly electronic transitions of the Ln³⁺ ions in case of Ho³⁺ and Nd³⁺ doped nanomaterials. Emission spectra show intense transitions from excited to ground state of Ln³⁺. Emission spectra of doped materials, in addition to the characteristic red emission peaks of Sb₂S₃, show other emission bands originating from f-f transitions of the Ho³⁺ ions. TGA curves indicated that Sb₂S₃ has the highest thermal stability. The electrical conductance of Ln-doped Sb₂S₃ is higher than undoped Sb₂S₃, and increase with temperature.     

Preparation, crystal structure and photoluminescence of Mn-doped magnesium pyroborates solid solutions, (Mg1-xMnx)2B2O5

Solid solutions of manganese(II)-doped magnesium pyroborate, ((Mg_1−xMn_x)₂B₂O₅, 0<x≤0.30, triclinic system, space group: P1¯ (no. 2)), were synthesized by solid state reaction. The unit cell parameters were refined by the Rietveld method of powder X-ray diffraction patterns. (Mg_1−xMn_x)₂B₂O₅ showed broad red emission at 670 nm under 414 nm excitation. The wavelengths of the emission peak did not depend on the manganese content. Absorption of the d-d transitions of Mn²⁺ ions was observed in the photoluminescence excitation spectra. The emission intensity reached the maximum at a Mn content (x) of 0.05 and decreased with increasing x from 0.05 to 0.30.     

Sr2CeO4:Eu and Sr2CeO4:5 mol% Eu, 3 mol% Dy microphosphors: Wet chemistry synthesis from hybrid precursor and photoluminescence properties

In this article, Sr₂CeO₄:x mol% Eu³⁺ and Sr₂CeO₄:5 mol%Eu³⁺, 3 mol% Dy³⁺ phosphors were synthesized from assembling hybrid precursors by wet chemical method. As-prepared samples present uniform grain-like morphology and the particle size is about 0.2 μm. The luminescence spectra of Sr₂CeO₄:x mol% Eu³⁺ have been measured to examine the influence of the intensity of red emission lines for Eu³⁺ on the concentration of Eu³⁺, showing that the intensity of the red emission increases with an increase of the concentration from 1 to 5 mol%. Additionally, from the emission spectra of Sr₂CeO₄:5 mol%Eu³⁺, 3 mol% Dy³⁺ phosphors, the characteristic lines of Dy³⁺ have also been observed. This result indicates that there also exists an energy transfer process between Sr₂CeO₄ and Dy³⁺.     

Vibrational anisotropy of MnO6 octahedron and phase separation in La0.67−yPryCa0.33MnO3 manganites

The role of vibrational anisotropy of Mn³⁺O₆ octahedron in the phase separation behavior of La_0.67−yPr_yCa_0.33MnO₃ (x=0, 0.15, 0.25 and 0.30) has been investigated by means of magnetization M, internal friction Q⁻¹, Young's modulus E along with the X-ray powder diffraction measurements. For the samples with y=0 and 0.15, the Q⁻¹ exhibits three peaks in the ferromagnetic region, which are attributed to the intrinsic inhomogeneity of ferromagnetic phase, i.e. the electronic phase separation with the coexistence of insulating and conducting phases. However, both the samples with y=0.25 and 0.30 undergo a magnetic phase separation with the coexistence of the antiferromagnetic and ferromagnetic phases, and the Q⁻¹ peaks related to the electronic phase separation have not been observed. In addition, the Q⁻¹ exhibits a peak in the paramagnetic region for all samples, which may result from the formation of magnetic clusters. We observed that the evolution from electronic to magnetic phase separation is close related to the rapid increase in the ratio of two kinds of Jahn-Teller distortion modes Q₃ and Q₂, i.e. Q₃/Q₂. A schematic phase diagram is given in the text, and it is suggested that the enhancement of vibrational anisotropy of Mn³⁺O₆ octahedron plays a key role in the evolution from electronic to magnetic phase separation.