Differential spectrophotometric determination of micro amounts of metal ions in mixtures

A differential spectrophotometric method is described for the simultaneous determinations of iron and molybdenum, iron and titanium, iron and uranium, molybdenum and titanium, and molybdenum and uranium in mixtures, in a single solution at room temperature. The general method consists in treating the mixture with 5 ml of 1 M sodium acetate and 1 ml of 1% pyrocatechol in 25-ml volumetric flasks. The optical density of color of mixed complexes is determined at the corresponding pair of wavelengths suggested. From the optical density and molar extinction coefficient, the concentration of each ion in mixtures has been calculated. By this procedure, the metal ions can be determined even if they differ by large ratios. Procedures have been extended for the analysis of mixtures containing iron, molybdenum, and titanium (or uranium). These procedures can be applied for the analysis of any type of materials, like minerals, rocks, ores, alloys, steels and refractory materials. Spectra of each complex and their Beer's law were studied in detail. Experiments were also made to show that the calculated and observed optical density of mixture complexes is the same, thereby the additive of optical density of mixtures at each pair of wavelengths suggested for individual determinations of ions have been verified.     

Some azo-dye reagents for the spectrophotometric determination of cadmium

2-[2-(5-Bromopyridyl)azol-4,5-dimethylphenol (BrPDMP) and 2-[2-benzothiazolylazo)-5-dimethylaminophenol (BTADAP) have been synthesised and compared, as reagents for cadmium, with the related dyes BrPADAP and BTDMP. The new dyes both form stable highly coloured 2:1 complexes with cadmium, with molar absorptivities (in o-xylene solution) of 3.8 x 10(4) 1.mole(-1).cm(-1) at 590 nm (BrPDMP) and 4.5 x 10(4) 1.mole(-1).cm(-1) at 600 nm (BTADAP). Cadmium can be determined by extraction under alkaline conditions with a solution of BTADAP in xylene. Beer's law is obeyed up to at least 16 mug of cadmium. A limit of detection of 0.15 mug has been estimated and a coefficient of variation of 3.3% at the 5 mug level was found. The only species which interfere seriously are Co(2+), Ni(2+), and Ca(2+). A 200-fold excess of zinc may be tolerated. The method has been applied to the determination of cadmium in water samples, plant materials and hair. Interferences were overcome by preliminary extraction into Aliquat/carbon tetrachloride. The acid dissociation constant of BTADAP (pK = 9.5) and formation constant of the cadmium-BTADAP complex (log beta = 15.1) have been determined.     

Potentiometric and spectrophotometric flow-injection determinations of metal ions with use of metal ion buffers

Potentiometric and spectrophotometric flow-injection determinations of metal ions, based on metal ion buffers, are described. A copper(II) ion-selective electrode and copper(II) ion buffers containing nitrilotriacetic acid (NTA) or ethylenebis(oxyethylenedinitrilo)tetraacetic acid (EGTA) are used for determination of ca. 10^?3 M transition metal ions or of calcium in the presence of magnesium. Spectrophotometric determination of transition metal ions is achieved by using a zinc ion buffer solution containing NTA and xylenol orange as indicator. Zinc concentrations up to 2 M can be determined by using large dispersion in the manifold. The factors influencing the sensitivity of the proposed methods are discussed.     

Simultaneous spectrophotometric determination of metal ions with 4-(pyridyl-2-azo)resorcinol (PAR)

Summary A new method for the simultaneous determination of the divalent ions of cadmium, cobalt, copper, lead, manganese, nickel and zinc in binary, ternary and quaternary mixtures based on the application of a multiple linear regression programme to the spectra of the complexes of these ions with 4-(pyridyl-2-azo)resorcinol (PAR) was developed. The detection limits afforded by the proposed method range from 0.02 g/ml for Co(II), Mn(II), Ni(II) and Zn(II) to 0.10 g/ml for Pb(II). The method is rapid and quite simple as it entails no prior separation, and was successfully applied to the analysis for the above-mentioned ions in synthetic samples and real alloys.     

Sensitive spectrophotometric determination of tin with Pyrogallol Red and cetyldimethylbenzylammonium ions

Summary Tin(IV), in the presence of cetyldimethylbenzylammonium chloride (CDBA), forms with Pyrogallol Red (PR) a complex SnPR-CDBA. This complex floates at the interface between hexane and aqueous medium. It dissolves in acetone and can be advantageously used for the determination of tin. The molar absorptivity is 6.5×10⁴ l·mole^–1·cm^–1 at 480 nm. The method is selective when citric acid is used as masking agent. Phosphate, fluoride, EDTA, nitrite and sulphide interfere.

---

Zusammenfassung Zinn(IV) bildet mit Pyrogallolrot (PR) in Gegenwart von Cetyldimethylbenzylammoniumchlorid (CDBA) einen Komplex. Dieser wird flotiert, in Aceton gelöst und zur Bestimmung von Zinn verwendet. Der molare Absorptionskoeffizient bei =480 nm beträgt =6,5·10⁴ l·mol^–1 cm^–1. Die Methode ist selektiv, wenn Zitrate zur Maskierung verwendet werden. Es stören Phosphat, Fluorid, ÄDTA, Nitrit und Sulfid.

     

Visible spectrophotometric determination of metal ions: the influence of structure on molar absorptivity value of copper(II) complexes in aqueous solution

In this study, the structure-absorptivity relationship problem is dealt with, on the basis of a considerable mass of data (117 complexes) concerning equatorial complexes of copper(II) in aqueous solution. Some spectrophotometric measurements have been carried out and as well as some molar absorptivity calculations on copper(II)-ammonia (ε₆₄₀=77 M⁻¹ cm⁻¹ for the Cu(NH₃)₄²⁺ species) and copper(II)-biuret (ε₅₀₅=46 M⁻¹ cm⁻¹ for the Cu(C₂H₃N₃O₂)₂²⁻ species) systems have been made, in order to complete the quantitative information necessary for the discussion. It was found that the qualitative relationship between ε_max and λ_max, for the complexes in question is traceable back to a hyperbolic type of path; the dispersion of the data in the cartesian plane (ε_max, λ_max) is analyzed and discussed. It has been found that the dissociated peptide nitrogen is, amongst those under study (namely: amino nitrogen; peptide nitrogen; imidazole nitrogen; carboxylate oxygen; alcoholate oxygen; hydroxide oxygen; water oxygen), that which corresponds to the major increase of ε_max for copper(II). On the contrary, the one which corresponds to the minor increase is the imidazole donor (that is pyridine nitrogen of imidazole residue), which manifests the ability to lower the ε_max values of the equatorial complexes of copper(II).Moreover, contrary to what has been previously demonstrated for λ_max, for ε_max it does not appear to be correct to schematize the ligand with its donor groups in order to assess spectrum-structure correlations. Consequently, this study contains a type of methodological proposal, even beyond the metal ion specifically in question, for the analyses of the selection criteria of the molecular characteristics that a ligand must possess in order to form a co-ordination compound of analytical interest with a determined metal ion.     

Polarographic determination of NTA in the presence of metal ions

Summary The determination of NTA in water containing large amounts of metal ions strongly complexing with NTA, even in acid solution, appears to be possible after removal of the metal ions by electrolysis at a mercury pool electrode. After the electrolysis NTA can be determined in the usual way by a suitable voltammetric method, which in the present work was a.c. polarography.

---

Polarographische Bestimmung von Nitrilotriessigsäure in Gegenwart von Metallionen

Zusammenfassung Die quantitative Bestimmung von Nitrilotriessigsäure, NTA, in wäßrigen Lösungen, die große Mengen Metallionen enthalten, die mit NTA auch in saurer Lösung stabile Komplexe bilden, ist nach Entfernung dieser Metallionen durch Elektrolyse an einer Quecksilberelektrode möglich. Nach der Elektrolyse kann NTA nach einer der üblichen voltammetrischen Methoden bestimmt werden. In dieser Arbeit wurde dazu die Wechselstrompolarographie angewendet.

Lecture presented at Euroanalysis I Conference, 28. 8.–1. 9. 1972 in Heidelberg, Germany.     

Optical sensors for determination of heavy metal ions

A review is given on optical means for single shot testing (probing) as well as continuous monitoring (sensing) of heavy metal ions (HMs). Following an introduction into indicator based approaches, we discuss the types of indicator dyes and polymeric supports used, as well as existing sensing schemes for HMs. The wealth of information is compiled in the form of tables and critically reviewed. Notwithstanding the tremendous work performed so far, it is obvious that still severe limitations do exist in terms of selectivity, limits of detection, dynamic ranges, applicability to specific problems, and reversibility. On the other hand, such sensors have found — and will find — their application whenever rapid and cost-effective testing is required, where personnel is scarce or unskilled, and in field tests. Despite their limitations, the number of such sensors (and of irreversible probes) for HMs is likely to increase in future.     

Sensitive spectrophotometric determination of beryllium with Eriochrome Cyanine R and cetyltrimethylammonium ions

In the presence of cetyltrimethylammonium ions (CTA) a significant bathochromic shift in the color reaction of beryllium with Eriochrome Cyanine R (ER) takes place. This is accompanied by a nearly trifold increase in the sensitivity. The triple complex of beryllium with Eriochrome Cyanine R and CTA (in which the molar ratio of Be:ER is 1:2) is proposed as a basis of a new sensitive spectrophotometric method of beryllium determination. The molar absorptivity ? = 8.65 × 10⁴ at λ_max = 590 nm, pH ~ 7 (borate buffer), when the solution is heated at 60 °C for 15 min. The method is very selective when EDTA is used as a masking agent. EDTA does not affect the formation of the triple beryllium complex neither do tartrate, citrate, and acetate. Phosphate and fluoride interfere.     

Sensitive spectrophotometric determination of gallium with eriochrome Cyanine R and cetyltrimethylammonium ions

Summary A new sensitive, spectrophotometric determination of gallium, based on the ternary gallium-Eriochrome Cyanine R-cetyltrimethylammonium system has been developed. At _max=588 nm the molar absorptivity is 1.20×10⁵l·mole^–1·cm^–1. The maximum absorbance is attained in 5 min in the presence of a 10-fold molar ratio of Eriochrome Cyanine R and an approx. 50-fold ratio of cetyltrimethylammonium bromide (to Ga). Citrate, EDTA and to a lesser extent tartrate, interfere. Interference by metals can be eliminated by a preliminary extraction of gallium with di-isopropyl ether from 7 M hydrochloric acid in the presence of ascorbic acid as reductant. The results for gallium (at a concentration level of 1×10^–4%) in aluminium metal and chloride indicate good precision and accuracy.

---

Empfindliche spektrophotometrische Bestimmung von Gallium mit Eriochromcyanin-R- und Cetyltrimethylammonium-Ionen

Zusammenfassung Ein neues, empfindliches spektrophotometrisches Verfahren zur Galliumbestimmung wurde ausgearbeitet. Es beruht auf der Verwendung des ternären Systems Gallium — EriochromcyaninR — Cetyltrimethylammonium. Bei _max=588 nm beträgt die molare Extinktion 1,20·10⁵ 1·Mol^–1·cm^–1. Die maximale Absorption wird innerhalb von 5 min bei Gegenwart der 10fachen molaren Menge EriochromcyaninR und der etwa 50fachen Menge Cetyltrimethylammoniumbromid erreicht. Citrat, ÄDTA und in geringerem Maß Tartrat stören. Störende Wirkung durch Metalle kann durch vorhergehende Extraktion des Galliums mit Diisopropyläther aus 7 M Salzsäure in Gegenwart von Askorbinsäure als Reduktionsmittel vermieden werden. Die Ergebnisse (im Konzentrationsbereich von 10^–4% Ga) in metallischem Aluminium und AICI₃ sind genau.

     

Some pyridylazo compounds as sensitive reagents for the spectrophotometric determination of nickel

Six 2-(2-pyridylazo)-5-alkoxyphenol derivatives were synthesized, and their application to the spectrophotometric determination of nickel was studied; 2-(2-pyridylazo)-5-methoxyphenol and the corresponding ethoxyphenol are very sensitive and selective. The molar absorptivity of the nickel chelate of the former is 11.3 × 10⁴ l mol^-1 cm^-1. A solvent extraction procedure for the selective determination of 1–8 μg of nickel is described.     

Effect of metal ions on the determination of semicarbazide hydrochloride with potassium bromate

Semicarbazide can be titrated quantitatively with potassium bromate in the presence of nickel(II), cobalt(III) and manganese(II) but copper(II) causes serious interference. The effects of copper ions on the reaction between potassium bromate and semicarbazide are investigated and the optimum conditions under which the reaction is quantitative are indicated.     

Effect of metal ions on the determination of polymer flocculants using triphenylmethane dyes

Transition and heavy metals interfere with the spectrophotometric determination of flocculants based on the formation of their ion associates with triphenylmethane dyes (TPM). The absorption band of metal complexes with these reagents overlaps the absorption band of the associates; moreover, metal ions enhance the absorption of the associate. The increase in sensitivity is accompanied by a decrease in repeatability; therefore, the detection limits of flocculants change insignificantly. In the determination of flocculants in water at a level of 1 mg/L and above, these metals should be separated or masked in advance.     

A simple and very sensitive spectrophotometric method for the direct determination of copper ions

A sensitive spectrophotometric method for the direct determination of copper in aqueous samples without a preconcentration step has been developed. It is based on the formation of a yellow complex with the chromogenic reagent di-2-pyridyl ketone benzoylhydrazone (dPKBH) in an alkaline medium. The complex stoichiometry was 1:2 (Cu:dPKBH) and presents maximum absorbance at 370 nm. The influence of chemical variables affecting the behaviour of the system such as pH, concentration of dPKBH, buffer solution and ethanol, order of addition of the reagents and stability of the complex, were evaluated. The molar absorptivity (epsilon) was 3.92x10(4) L mol(-1) cm(-1), and Beer's law was obeyed up to 3 mg L(-1) of copper. The relative standard deviation was 0.46% (n=11) for a sample containing 1 mg L(-1) Cu(II). The limit of detection was 2.5 micro g L(-1) and was therefore more sensitive than the direct methods reported previously. Finally, the method was successfully validated by analysing several real samples with different matrices, such as tap water, natural water or copper alloys, with an average relative error of 2.46%.     

Use of binary metal deposits on a cylindrical carbon-fiber microelectrode in the voltammetric determination of metal ions

The effect of binary metal deposits on a cylindrical carbon-fiber microelectrode on the determination of metals by direct and stripping voltammetry was studied. The electrolytic deposition of a binary system of copper and thallium, cadmium, lead, or mercury on the electrode in an alkaline solution resulted in the disappearance of the electroreduction peak of dissolved oxygen in the potential range from -0.8 to -1.4 V and in a decrease in the background current. Under the conditions of limited diffusion, the peak currents of Ni(II), Co(II), and Zn(II) in differential pulse voltammograms were 3–7 times higher than those calculated for a reversible electrode process under the conditions of semi-infinite diffusion. Because of this, the determination limit for metal ions in direct voltammetry was lowered to 1 X 10^-6 M. With a binary copper-thallium system, the peak current of zinc(II) reduction can be be detected in the presence of 5000-fold molar amounts of copper(II). The deposition of binary copper-lead and copper-thallium systems under the conditions of limited diffusion reduced the effect of negative interaction between the components of these systems and made possible the determination of lead(II) and thallium(I) by stripping voltammetry using additional peaks.     

Polarographic and spectrophotometric studies of the spiro[indolin-pyridobenzopyrane] complexes with the heavy metal ions

By means of the cathode differential pulse polarography on a mercury drop electrode the reactions of Zn²⁺, Cd²⁺, and Pb²+ ions with the spiro[pyridobenzopyranes] of the indoline series in DMSO were studied. Tetrabutylammonium perchlorate was used as the background electrolyte. It is found that well soluble heavy metal complexes of the spiro[indolin-pyridobenzopyranes] are formed in DMSO. The number of ligands, the step and the general stability constants of the obtained complex compounds are evaluated. The distribution curves of all the complexes under investigation are plotted. The spiropyrane complexes were also studied by means of the spectrophometric method. Good agreement of the results obtained by two different methods was established.