Preparation of γ-AL(OH)3 and γ-AL2O3 Nanoparticles by the Method of Pulsed Laser Ablation of Metal Aluminum in Water

Russian Physics Journal -     

Synthesis of Nanometer Glass and Crystal Particles by Excimer Laser Ablation

ＳｙｎｔｈｅｓｉｓｏｆＮａｎｏｍｅｔｅｒＧｌａｓａｎｄＣｒｙｓｔａｌＰａｒｔｉｃｌｅｓｂｙＥｘｃｉｍｅｒＬａｓｅｒＡｂｌａｔｉｏｎＬＯＵＱｉｈｏｎｇＺＨＥＮＧＪｕｎＤＯＮＧＪｉｎｇｘｉｎＬＩＪｉｎｇＷＥＩＹｕｎｒｏｎｇＨＵＡＮＧＷｅｉｍｉｎ（Ｓｈａ...     

Characteristics of γ-Al2O3 nanoparticles generated by continuous-wave laser ablation in liquid

Laser ablation in liquid is one of the most widely investigated methods for generating various nanoparticles (NPs) that are difficult to produce using other means. In this paper, we report the generation of Al-oxide NPs by continuous-wave (CW) fibre laser ablation of corundum (α-Al₂O₃) target submerged in deionised water. The effects of CW fibre laser power and radiation time have been investigated. Characterisation of the NPs generated, in terms of size, size distribution, shape, chemical composition, and phase structure, was carried out by means of high-resolution transmission electron microscopy (HR-TEM), high angle annular dark field (HAADF) in scanning-transmission (STEM) mode, energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD). The results show that the average size of Al-oxide NPs, in the range of 17 to 29 nm, increased with increasing the laser power and laser exposure time, and the NPs are dominated by stoichiometric γ-Al₂O₃ with a minor phase of α-Al₂O₃. The mechanism involved in the CWLAL is also discussed.     

Characteristics of Plasma Shock Waves Generated in the Pulsed Laser Ablation Process

We modify the Sedov theory to describe plasma shock waves generated in a pulsed laser ablating process,We also study the propagation characteristics of plasma shock during the preparation process of functional thin films deposited by a pulsed laser,In particular,we discuss in detail the temporal behaviour of energy causing the difference of the propagation characteristics between the plasma shock wave and the ideal shock wave in the point explosion model.Under the same experimental conditions,the theoretical results calculated with our modified Sedov theory are in good agreement with the existing experimental data.     

Ablation efficiency of α-Al2O3 in liquid phase and ambient air by nanosecond laser irradiation

Ablation efficiency and influences of laser parameters on a material removal rate by a nanosecond laser irradiation of α-Al₂O₃ are studied in gas and liquid phases. The laser ablation in the air yields maximum material removal rate of 12 ng/pulse using a 4.6-mJ pulse energy at 4-kHz repetition rate, compared to 88 ng/pulse in the water flow. Using a specific interpulse distance and a laser repetition rate further increase material removal rate by factor of 3 and 65, respectively, owing to an optimized lattice temperature and laser pulse interactions with the generated cavitation bubble. For the ablation in the air, these parameters do not significantly affect the ablation efficiency.     

Pulsed laser deposition of Eu:Y2O3 thin films on (0001) α-Al2O3

This paper focuses on the preparation and characterization of crystalline thin films of rare-earth-doped sesquioxides (Y₂O₃, Lu₂O₃) grown by pulsed laser deposition on single-crystal (0001) sapphire substrates. X-ray diffraction measurements show that the films with thicknesses between 1 nm and 500 nm were highly textured along the 111 direction. Using Rutherford backscattering analysis, the correct stoichiometric composition of the films was established. The emission and excitation spectra of europium-doped films with a thickness 100 nm look similar to those of the corresponding crystalline bulk material, whereas films with a thickness 20 nm show a completely different emission behavior. PACS 68.55.Jk; 78.66.Nk; 81.15.F     

Adsorption and dehydrogenation of 2-propanol on the surface of γ-Al2O3-supported gold

The adsorption and reactions of 2-propanol on γ-Al₂O₃ and γ-Al₂O₃-supported gold samples were investigated by infrared (IR) spectroscopy, modulated differential scanning calorimetry (MDSC) and mass spectrometry. Adsorption of the alcohol on the samples at room temperature led to formation of molecularly adsorbed 2-propanol and 2-propoxide species bonded to Al³⁺ sites. Treatment of γ-Al₂O₃ after alcohol adsorption in flowing He from 25 to 300 °C led to 2-propanol desorption, without evidence of surface reactions. In contrast, when supported gold samples were exposed to the same thermal treatment, formation of acetone and H₂ was observed by mass spectra of the effluent gases from the flow reactor. Concomitantly, IR spectra of the samples showed the appearance of a band at 1698 cm^? 1, assigned to ν_CO vibrations of adsorbed acetone. The formation of acetone occurred by the dehydrogenation of 2-propoxide species bonded to Al³⁺ sites, as evidenced by (a) the decrease in the intensities of their IR bands and (b) the presence of a MDSC peak at approximately the same temperature as that at which acetone was formed and the 2-propoxide species were consumed. It is proposed that gold particles on the γ-Al₂O₃ surface facilitate breaking of the β-CH bond of neighboring surface 2-propoxide species to give acetone. Our results emphasize the bifunctional character of supported gold catalysts for the dehydrogenation of alcohols.     

Thermoluminescence of α-Al 2O 3 by neutron irradiation at low temperature

Thermoluminescence (TL) mechanisms of neutron-irradiated α-Al₂O₃ at 20 K is reported. The TL glow curves of neutron-irradiated and γ-ray-irradiated α-Al₂O₃ were observed. The TL emission bands near 340, 430, 530 and 694 nm were observed in the neutron-irradiated α-Al₂O₃. The γ-ray-irradiated α-Al₂O₃ only showed the TL emission line nearly at 694 nm, corresponding to the R lines of α-Al₂O₃:Cr³⁺. Therefore, the first three emission bands are related to the atomic displacement defects as F-type centers caused by neutron irradiation.     

Monte Carlo Simulation of Growth of Thin Film Prepared by Pulsed Laser

We use the Monte Carlo simulation method to perform the early growth stage of thin film prepared by pulsed laser deposition.We focus on the number of point defects on the substrate surface varying with the energy density of laser and substrate temperature.The results shows that the laser energy and the substrate temperature strongly affect the morphology and size of the growth islands and the deposition rate of thin film,Our results are in good agreement with the related experimental results.     

Effect of nano γ-Al2O3 addition on ion dynamics in polymer electrolytes

Polymer electrolytes, which hold the key of successful operation of all solid state ionic devices, have been investigated. An amorphous polymer was used to facsimile fast ion transport in the gel polymer electrolytes (GPE) and room temperature conductivity >10⁻³ S/cm can be attained. Further, these electrolytes were transformed into composites by dispersing inorganic particles of γ-Al₂O₃ (11 nm in size) in varying wt.%. An enhancement in the conductivity for an optimum concentration using LiClO₄ as a salt can be obtained and is described in terms of free charge carrier concentration, while the other family of Lithium salts viz. LiTf, LiIm, LiBETI decreases the conductivity marginally. FTIR spectroscopy supports the observed decrease in terms of more association between fillers and salts. It has been realized that the mechanical integrity of these composites increases manifold, without affecting the conductivity, significantly.     

Effects of Confined Laser Ablation on Laser Plasma Propulsion

We investigate the effects of confined laser ablation on laser plasma propulsion. Compared with planar ablation, the cavity ablation provides an effective way to obtain a large target momentum and a high coupling coefficient. When laser pulses are focused into a cavity with 1 mm diameter and 2ram depth, a high coupling coefficient is obtained. By using a glass layer to cover the cavity, the coupling coefficient is enhanced by 10 times. Meanwhile, it is found that with the increase of the target surface size, the target momentum presents a linear increase.     

Chemical Oxidation of La2CuO4 Epitaxial Thin Films Grown by Pulsed Laser Deposition

Chemical oxidation is used to induce superconductivity in La2CuO4 expitaxial thin films fabricated by pulsed laser deposition technique. Details about the influence of oxidation time on structural, surface morphology, Raman spectra, and electrical properties have been investigated. The results convince that successful uptake of oxygen occurs in the oxidized films, and the content of the inserted oxygen increases with increasing oxidation interval. The possible mechanism for the excess oxygen insertion into the film is also discussed.     

Luminescence property studies of α-Al2O3 by means of nanosecond time-resolved VUV spectroscopy

The luminescence spectra of corundum monocrystals grown by different methods are investigated by means of a time-resolved spectroscopy method at temperatures 90 K and 300 K. The existence of fast and slow emission in the VUV luminescence spectra of irradiated and nonirradiated crystals was observed. We observed luminescence bands with a maximum at 326 nm produced by F ⁺ centers. A new type of fast luminescence at the band of 270 nm was found. This is known as cross-luminescence and is connected with the recombination of valence band electrons with the holes in the low ground band. It was shown that the band of 410 nm isn't due to to anionic centers (F-centers), but is determined by the short lifetime center of emission (F ^- -centers). Received 20 October 1998 and Received in final form 20 January 1999     

Synthesis of flower-shape clustering GaN nanorods by ammoniating Ga2O3 films

Flower-shape clustering GaN nanorods are successfully synthesized on Si（111） substrates through ammoniating Ga2O3/ZnO films at 950℃. The as-grown products are characterized by x-ray diffraction （XRD）, scanning electron microscope （SEM）, field-emission transmission electron microscope （FETEM）, Fourier transform infrared spectrum （FTIR） and fluorescence spectrophotometer. The SEM images demonstrate that the products consist of flower-shape clustering GaN nanorods. The XRD indicates that the reflections of the samples can be indexed to the hexagonal GaN phase and HRTEM shows that the nanorods are of pure hexagonal GaN single crystal. The photoluminescence （PL） spectrum indicates that the GaN nanorods have a good emission property. The growth mechanism is also briefly discussed.     

Synthesis of GaN Nanorods by Ammoniating Ga2O3/ZnO Films

Large quantities of CaN nanorods are successfully synthesized on Si（111） substrates by ammoniating the films of Ga2O3/ZnO at 950℃ in a quartz tube. The structure, morphology and optical properties of the as-prepared CaN nanorods are studied by x-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, Fourier transform infrared spectroscopy, and photoluminescence. The results show that the CaN nanorods have a hexagonal wurtzite structure with lengths of several micrometres and diameters from 80 nm to 300hm, which could supply an attractive potential to harmonically incorporate future GaN optoelectronic devices into Si-based large-scale integrated circuits. The growth mechanism is also briefly discussed.     

Ablation of GaN Using a Femtosecond Laser

We study the pulsed laser ablation of wurtzite gallium nitride(GaN) films grown on sapphire,using the femtosecond laser beam at a central wavelength of 800nm as the source for the high-speed ablation of GaN films.By measuring the backscattered Raman spectrum of ablated samples,the dependence of the ablation depth on laser fluence with one pulse was obtained.The threwshold laser fluence for the ablation of GaN films was determined to be about 0.25J/cm^2,Laser ablation depth increases with the increasing laser fluence until the amount of removed material is not further increased.The ablated surface was investigated by an optical surface interference profile meter.     

Characteristics of Upconversion Luminescence of CaF2:Er Powders Excited by 1.5-µm Laser Radiation

Optics and Spectroscopy - The characteristics of upconversion luminescence of CaF2:Er crystalline powders upon laser excitation of Er3+ ions to the 4I13/2 level at a wavelength of 1531.8 nm are...     

Synthesis of Cubic Boron Nitride by the Reaction of Li3N and B2O3

Cubic boron nitride is synthesized by the reaction of Li3N and B203 under high pressure and high temperature （4.0-5.0 GPa, 1350-1500℃）. The minimum pressure of cBN formation is 4.0 GPa. The present condition of cBN formation is clearly lower than the eutectic temperature of Li3BN2 and BN in the Li3N-hBN system （5.5 GPa, 1610℃）. The content of cBN in the sample increases, while the content of hBN decreases with the temperature and pressure. The maximum conversion rate （5.0 GPa, 1500℃） is about 34%, which is higher than that in the hBN-Li3N system. The cBN crystals are octahedral or tetrahedral in shape and approximately 20 μm in diameter.     

Structural and phase transition of α-Al2O3 powders obtained by co-precipitation method

Aluminium oxide has been synthesized by co-precipitation technique at different annealing temperature. Powder XRD confirms the formation of α-Al₂O₃ with rhombohedral crystal structure having lattice constant a = 4.76 Å and b = 12.99 Å by the Scherer formula, the average crystallite size is estimated to be 66 nm. The scanning electron microscope results expose the fact that the α-Al₂O₃ nanomaterials are seemingly porous in nature and highly agglomerated. Chemical composition of aluminium oxide is confirmed by energy dispersive spectroscopy. The molecular functional group is confirmed by FTIR. Optical absorption of α-Al₂O₃ has been studied in the UV–vis region and its direct band gap is estimated to be 5.97 eV. This study involves the structural and phase transition of Al₂O₃ and also indicates that α-Al₂O₃ has considerable properties, deserving further investigation for the energetic materials with excellent properties for the possibility of using thin-layer α-Al₂O₃ as a thermo luminescence material.