Electrochemical generation of manganese (III) at glassy carbon electrode in acetic acid

Conditions were established for the electrochemical generation of manganese(III) at glassy carbon in acetic acid. In the oxidation of manganese-(II) in potassium acetate supporting electrolyte high current efficiencies were achieved in a wide range of current densities at the working electrode, whereas in the presence of sodium perchlorate a successful generation of manganese(III) could be performed only at low current densities. With increasing content of water in the anolyte the amount of generated manganese (III) was abruptly decreased and its stability in the solution was diminished. Procedures are given for a successful coulometric titration of reducing substances with anodically generated manganese (III); biamperometric, potentiometric and bipotentiometric methods for the location of the end-point were employed. The error of the determinations did not exceed ± 2%.     

Anodic generation of cerium (IV) at glassy carbon in acetic acid and coulometric titrations with the generated reagent

Conditions for electrochemical generation of cerium(IV) at glassy carbon in acetic acid in the presence of alkali-metal acetates and sodium perchlorate, respectively, were investigated. A high current efficiency was achieved in anodic oxidation of cerium(III) in acetate supporting electrolytes. Coulometric titration methods for the determination of reducing substances with the generated oxidant were also developed. The end-points were determined by the biamperometric and bipotentiometric methods. The error of the determinations was less than + 2%.     

Anodically generated cobalt(III) acetate as reagent for coulometric titrations in acetic acid

Summary Conditions for the anodic generation of cobalt(III) acetate with high current efficiency in non-aqueous solutions of potassium acetate in acetic acid have been investigated. The presence of water or acetic anhydride in the anolyte diminishes the amount of the generated oxidant. The stability of the generated cobalt(III) acetate solution is decreased in the presence of water and at elevated temperatures. Procedures for coulometric titrations of reducing substances with cobalt(III) acetate, using the biamperometric or the potentiometric end point detection, are described.Presented at the Fifth European Conference on Analytical Chemistry-EUROANALYSIS V, Cracow, Poland, August 26–31, 1984.     

Coulometric titrations of arsenic(III) and antimony(III) with electrically generated bromine in acetic acid

Conditions for the coulometric titrations were investigated. Arsenic(III) could be titrated by continuous or discontinuous generation of bromine, and antimony(III) by discontinuous generation or back-titration. The accuracy and reproducibility depend on the pretreatment of the platinum electrodes.     

Investigation of cobalt interference on lead hydride generation with tetrahydroborate(III) in the presence of hexacyanoferrate(III)

The interference of Co(II) on plumbane generation with tetrahydroborate in the presence of hexacyanoferrate(III) was studied with a new mechanism proposed to explain the interference. The products that were obtained, following reactions of a CoCl₂ solution with tetrahydroborate(III), which interfere with plumbane generation, were precipitated and investigated by inductively-coupled plasma-atomic emission spectrometry and -mass spectrometry (ICP-OES and ICP-MS). Batch experiments of the potentiometer analysis and pH determination were performed to investigate a mechanism of Co(II) interference on plumbane generation, the role of hexacyanoferrate(III) on plumbane generation, and the function of the masking agent on Co(II) interference. The preferentially formed nanoscale catalytic and magnetic cobalt borides in the redox system cause a potential for a strong reducing condition and induces the precipitation of Fe(III) and Pb(II) in the solution, which is counter to plumbane generation. Potassium thiocyanate/oxalic acid/1,10-phenanthroline, as the combined masking agent and working with hexacyanoferrate(III), decreases the amount of borides in the precipitates and acts as a kind of buffer of the redox potential, which maintains the conditions for plumbane generation. This hydride generation method has been applied to the direct determination of trace Pb in cobalt oxide standard reference materials with a detection limit of 0.3 µg L^− 1.     

A New potentiometric determination of L-ascorbic acid(Vitamin C) in Pharmaceuticals with hexamine cobalt (III) tri carbonato cobaltate

Abstract

A new potentiometric method is developed for determination of 10–100 μg ml of L-ascorbic acid in pure solution and Pharmaceuticals with 0.1 to 0.8% RSD.

Interference study is carried out for different acids, Most importantly, the new method is applied for variety of vitamine C in Pharmaceuticals and successful results are achieved.     

A new reductimetric reagent: Iron (II) in acetic acid medium and in presence of pyrophosphate. Spectrophotometric titration of some oxazine dyes

Iron(II) in acetic acid medium and the presence of pyrophosphate is used as a new reductimetric reagent and utilised for the spectrophotometric titration of microgram quantities of six oxazine dyes. All these dyes are rapidly and quantitatively reduced to their colourless leuco-bases in a 2-electron reduction with iron(II), provided the medium contains 1 or 3M acetic acid (depending on the dye) and at least 0.1M pyrophosphate. The redox potentials of the iron(III)/iron(II) couple at different pyrophosphate and acetic acid concentrations have been measured and a method for purification of some of the commercially impure oxazine dyes is suggested.     

抗坏血酸在离子液体修饰玻碳电极上的电化学行为

利用离子液体1-丁基-3-甲基咪唑四氟硼酸盐(BMIMBF4)对玻碳电极(GCE)进行修饰,制备了BMI-MBF4/GCE电极.在0.1mol/L的磷酸盐缓冲溶液中,采用循环伏安法研究了抗坏血酸在BMIMBF4/GCE电极和裸玻碳电极(GCE)上的电化学行为.结果表明,pH=5.7的磷酸盐缓冲溶液为最佳测定底液,最佳富集时间为120s;BMIMBF4/GCE对抗坏血酸的氧化反应有很好的电化学催化作用.抗坏血酸的氧化峰电流与其浓度在2.0×10-4～1.0×10-2 mol/L的范围内呈良好的线性关系,相对标准偏差为4.53%(n=5).     

Zinc and cobalt complexes with (2-carboxyphenoxy) acetic acid ligand: syntheses,structures, fluorescent and magnetic properties

Four binary compounds, [Zn(cpa)(H₂O)₃] (1), [Co(cpa)(H₂O)₃] (2), [Zn(cpa)(H₂O)]_n, (3) and [Co(cpa)(H₂O)]_n (4) (H₂cpa = (2-carboxyphenoxy)acetic acid), have been synthesized and structurally characterized. In mononuclear 1 or 2, the metal ion (Zn^II for 1 and Co^II for 2) is surrounded by three water molecules and one tridentate chelate cpa^2? in a distorted octahedral geometry, while in 3 or 4, the central metal ion (Zn^II for 3 and Co^II for 4) is located in a deformed square–pyramid formed by one water and two cpa^2?. Each cpa^2? is chelate bridging μ₂ coordination and forms a 1-D zigzag chain structure 2 or 3. The different synthesis conditions for 1–4 have been carefully discussed. The solid-state fluorescence measurements for 1 and 3 together with magnetic properties for 4 also have been investigated.     

Determination of chromium(VI) and total chromium in water by in-electrode coulometric titration in a porous glassy carbon electrode

Chromium(VI) is determined through its direct electrochemical reduction in the bulk of a porous glassy carbon electrode. An electrode filled with the acidified sample and Cr(VI) is reduced by means of a constant current whereas the potential of the electrode is monitored. The limits of detection and quantification were found to be 1.9 and 6.0 μg · L⁻¹, resp. The linear range, repeatability and reproducibility were found to be 5–500 μg · L⁻¹, 1.2, and 1.8%, resp. The influence of Fe(III), Ca(II), Mg(II), sulphates, nitrates, humic acids and surfactants was investigated. Total chromium was measured after chemical oxidation of Cr(III) to chromate by permanganate. The method was applied to analyses of water samples.     

Reactivity trends of cobalt(III) complexes towards various amino acids based on the properties of the amino acid alkyl chains

The reactivity of the cobalt(III) complexes dichlorido[tris(2‐aminoethyl)amine]cobalt(III) chloride, [CoCl₂(tren)]Cl, and dichlorido(triethylenetetramine)cobalt(III) chloride, [CoCl₂(trien)]Cl, towards different amino acids (l ‐proline, l ‐asparagine, l ‐histidine and l ‐aspartic acid) was explored in detail. This study presents the crystal structures of three amino acidate cobalt(III) complexes, namely, (l ‐prolinato‐κ²N,O)[tris(2‐aminoethyl)amine‐κ⁴N,N′,N′′,N′′′]cobalt(III) diiodide monohydrate, [Co(C₅H₈NO₂)(C₆H₁₈N₄)]I₂·H₂O, I , (l ‐asparaginato‐κ²N,O)[tris(2‐aminoethyl)amine‐κ⁴N,N′,N′′,N′′′]cobalt(III) chloride perchlorate, [Co(C₄H₇N₂O₃)(C₆H₁₈N₄)](Cl)(ClO₄), II , and (l ‐prolinato‐κ²N,O)(triethylenetetramine‐κ⁴N,N′,N′′,N′′′)cobalt(III) chloride perchlorate, [Co(C₄H₇N₂O₃)(C₆H₁₈N₄)](Cl)(ClO₄), V . The syntheses of the complexes were followed by characterization using UV–Vis spectroscopy of the reaction mixtures and the initial rates of reaction were obtained by calculating the slopes of absorbance versus time plots. The initial rates suggest a stronger reactivity and hence greater affinity of the cobalt(III) complexes towards basic amino acids. The biocompatibility of the complexes was also assessed by evaluating the cytotoxicity of the complexes on cultured normal human fibroblast cells (WS1) in vitro. The compounds were found to be nontoxic after 24 h of incubation at concentrations up to 25 mM.     

New Indicator for the Titration of Iron(III) with EDTA

Abstract

New metal indicators, 7 -(2-hydroxy-1-naphthylazo)-8-hydroxy-quinoline-5-sulfonic acids were synthesized. Among them 7-(6-nitro-4-sulfo-2-hydroxy-1-naphthylazo)-8-hydrqxyquinoline-5-sulfonic acid(NH-SNAZOXS) is recommended as an indicator for the titration of iron(III) with EDTA. The sharp color change at the equivalence point from yellow to violet is obtained at pH 2.0 to 3.0 at 50°.     

Synthesis,crystal structure and antibacterial activity of manganese(III) and cobalt(III) complexes containing pentadentate Schiff bases of a common amine and thiocyanate

Abstract

Four new mononuclear Schiff base manganese(III) and cobalt(III) complexes viz. [Mn(L¹)(NCS)] (1), [Mn(L²)(NCS)] (2), [Co(L³)(NCS)] (3), and [Co(L⁴)(NCS)]·0.5CH₃OH·0.5H₂O (4), containing thiocyanate as a common pseudohalide ion are reported. The pentadentate Schiff base ligands H₂L¹, H₂L², H₂L³, and H₂L⁴ were obtained by the condensation of substituted salicylaldehydes with N-(3-aminopropyl)-N-methylpropane-1,3-diamine. The syntheses of the complexes have been achieved by the reaction of manganese(II) perchlorate or cobalt(II) perchlorate with the respective Schiff bases in the presence of thiocyanate in methanol medium. Complexes 1–4 have been characterized by microanalytical, spectroscopic, single-crystal X-ray diffraction and other physicochemical studies. Structural studies reveal that 1–4 adopt nearly similar structures containing the MN₄O₂ (M?=?Mn, Co) chromophore in which each central M(III) ion adopts a distorted octahedral geometry. Weak intermolecular H-bonding interactions are operative in these complexes to bind the molecular units. The antibacterial activity of 1–4 and their constituent Schiff bases has been tested against some common bacteria.     

Simultaneous determination of tryptophan, uric acid and ascorbic acid at iron(III) doped zeolite modified carbon paste electrode

A new chemically modified electrode is constructed based on iron(III) doped zeolite modified carbon paste electrode (Fe(3+)Y/ZCME). The electrode was evaluated as a sensor for sub-micromolar determination of tryptophan (Trp), uric acid (UA) and ascorbic acid (AA) in aqueous solutions. The measurements were carried out by application of the differential pulse voltammetry (DPV) method in phosphate buffer solution with pH 3.5. Iron(III) loaded in zeolite can increase anodic peak currents by adsorption of Trp, UA and AA on electrode surface The analytical performance was evaluated with respect to the carbon paste composition, pH of solution, accumulation time and accumulation potential. The prepared electrode shows voltammetric responses with high sensitivity and selectivity for Trp, UA and AA in optimal conditions, which makes it very suitable for simultaneous determination of these compounds. The linear calibration range for AA in the presence of 50muM UA and 50muM Trp was 0.6muM to 100muM, with a correlation coefficient of 0.9992, and a detection limit of 0.21muM (S/N=3). A linear relationship was found for UA in the range of 0.3-700muM containing 10muM AA and 50muM Trp, with a correlation coefficient of 0.9990 and a detection limit of 0.08muM. The linear calibration range for Trp in the presence of 10muM AA and 50muM UA was 0.2-150muM, with a correlation coefficient of 0.9996, and a detection limit of 0.06muM. The proposed method was successfully applied for determination Trp, UA and AA in biological systems and pharmaceutical samples.     

Voltammetric determination of antibacterial drug gemifloxacin in solubilized systems at multi-walled carbon nanotubes modified glassy carbon electrode

A sensitive electroanalytical method for determination of gemifloxacin in pharmaceutical formulation has been investigated on the basis of the enhanced electrochemical response at multi-walled carbon nanotubes modified glassy carbon electrode in the presence of CTAB. Solubilized system of different surfactants including SDS, Tween-20 and CTAB were taken for the study of electrochemical behaviour of gemifloxacin at modified electrode. The reduction peak current increases in the presence of CTAB while other surfactants show opposite effect. The modified electrode exhibits catalytic activity, high sensitivity, stability and is applicable over wide range of concentration for the determination of gemifloxacin. The mechanism of electrochemical reduction of gemifloxacin has been proposed on the basis of CV, SWV, DPV and coulometeric techniques. The proposed squarewave voltammetric method shows linearity over the concentration range 2.47-15.5 μg/mL. The achieved limits of detection (LOD) and quantification (LOQ) are 0.90 ng/mL and 3.0 ng/mL respectively.     

Complexes of oxamic acid with Au(III) and Rh(III)

The preparation and some properties of the deprotonated complexes of oxamic acid with Au(III) and Rh(III) are reported. On the basis of analytical results, conductometric measurements, magnetic moments and spectral data (IR and UV-visible), a square planar structure is proposed for K[AuL(OH)₂] and octahedral for K₃[RhL ₃] 3H₂O (whereLH₂=oxamic acid).L ^2– acts as a bidentate, non-bridging ligand.

---

Komplexe der Oxamidsäure mit Au(III) und Rh(III)

Zusammenfassung Es wird über die Darstellung und einige Eigenschaften von deprotonierten Komplexen der Oxamidsäure mit Au(III) und Rh(III) berichtet. Auf der Grundlage von analytischen Ergebnissen, Leitfähigkeitsmessungen, magnetischen Momenten und IR- und UV(vis)-spektroskopischen Daten wird für K[AuL(OH)₂] eine quadratisch planare und für K₃[RhL ₃] 3 H₂O eine oktaedrische Struktur vorgeschlagen (LH₂=Oxamidsäure).L ^2– reagiert als zweizähniger, nicht überbrückender Ligand.

     

Study on the interaction of lanthanum(III) with adrenaline

Lanthanum(III) equilibria in the presence of adrenaline have been investigated by potentiometric titration under physiological conditions (37°C and an ionic strength of 0.15?M NaCl). The interaction of lanthanum(III) with adrenaline has also been studied using an ab initio method. The complex species in the lanthanum(III)–adrenaline system have been ascertained and the protonation constants for adrenaline and the stability constants for lanthanum(III) complexes with adrenaline have been obtained. Adrenaline can form stable lanthanum(III) complexes with the phenolic hydroxyl group of adrenaline as the binding site of lanthanum(III).     

Glassy Carbon Electrode Modified with Citrate Stabilized Gold Nanoparticles for Sensitive Arsenic (III) Detection

The electrochemical detection of As(III) was investigated on the novel citrate stabilized gold nanoparticle modified glassy carbon electrode (AuNPs/GCE) in 1 M HCl by square wave anodic stripping voltammetry. AuNPs/GCE was prepared by simply casting citrate stabilized gold nanoparticles onto the well-polished glassy carbon electrode. Gold modification was evaluated by cyclic voltammetry, while transmission electron microscopy and UV-vis Spectroscopy revealed the size and distribution of gold nanoparticles. Anodic stripping voltammetry was performed with the modified electrode in As(III) solution. Electrochemical experiments proved that AuNPS/GCE exhibited good performance for As(III) analysis, the linear range were obtained between 0.05 and 1 ppb for trace level of As(III) as well as 1 to 15 ppb, with a limit of detection of 0.025 ppb. In terms of reproducibility, the precision of the aforementioned method in %RSD was calculated at 7.78% (n = 10), and the repeatability of the proposed method was calculated to be 1.59%. The application of the method to analyze As(III) in tap water was investigated.     

Electrocatalytic reduction of NAD+ at glassy carbon electrode modified with single-walled carbon nanotubes and Ru(III) complexes

A simple procedure was developed to prepare a glassy carbon electrode modified with carbon nanotubes and Ruthenium (III) complexes. First, 25 μl of dimethyl sulfoxide–carbon nanotubes solutions (0.4 mg/ml) was cast on the surface of the glassy carbon electrode and dried in air to form a carbon nanotube film at the electrode surface. Then, the glassy carbon/carbon nanotube-modified electrode was immersed into a Ruthenium (III) complex solution (direct deposition) for a short period of time (10–20 s for multiwalled carbon nanotubes and 20–40 s for single-walled carbon nanotubes). The cyclic voltammograms of the modified electrode in aqueous solution shows a pair of well-defined, stable, and nearly reversible redox couple, Ru(III)/Ru(II), with surface-confined characteristics. The attractive mechanical and electrical characteristics of carbon nanostructures and unique properties and reactivity of Ru complexes are combined. The transfer coefficient (α), heterogeneous electron transfer rate constants (k _s), and surface concentrations (Γ) for the glassy carbon/single-walled carbon nanotubes/Ru(III) complex-, glassy carbon/multiwalled carbon nanotubes/Ru(III) complex-, and glassy carbon/Ru(III) complex-modified electrodes were calculated using the cyclic voltammetry technique. The modified electrodes showed excellent catalytic activity, fast response time, and high sensitivity toward the reduction of nicotinamide adenine dinucleotide in phosphate buffer solutions at a pH range of 4–8. The catalytic cathodic current depends on the nicotinamide adenine dinucleotide concentration. In the presence of alcohol dehydrogenase, the modified electrode exhibited a response to addition of acetaldehyde. Therefore, the main product of nicotinamide adenine dinucleotide electroreduction at the Ru(III) complex/carbon nanotube-modified electrode was the enzymatically active NADH. The purposed sensor can be used for acetaldehyde determination.     

Solvent and Temperature Dependence of 59Co NMR Chemical Shifts of Tris(acetylacetonato)cobaIt(III) and Tris(dipivaloylmethanato)cobalt(III)

Cobalt-59 NMR chemical shifts of Co(acac)₃, and Co(dpm)₃ (acac^– = acetylacetonate ion and dpm^– = dipivaloylmethanate ion) in 14 organic solvents, C₆H₁₄, C₆H₆, CH₂Cl₂, CHCl₃, CCl₄, CH₃CN, CH₃OH, C₂H₅OH, CH₃CH(OH)CH₃, (C₂H₅)₂O, (CH₃)₂CO, (CH₃)₂SO, (CH₃)₂NCHO and C₆H₅NO₂, were measured at five temperatures ranging from 289 to 329 K. The observed chemical shift (_obs) was linearly correlated to the maximum absorption wavelength in the visible spectra (_max) corresponding to the d-d electronic transition energy between the ground ¹A_1g and excited ¹T_1g states. The _obs-_max relation was explained by the ligand field theory. The temperature coefficients of _obs, of each complex showed a negative correlation with _obs. The _obs, of Co(acac)₃ decreased with the increasing electrophilic ability of the solvent (Mayer's acceptor number), whereas no tendency was observed in the case of Co(dpm)₃.