原位聚合法制备具有温敏PNIPAM壳的核-壳结构聚合物纳米微球的研究

结合大分子自组装和原位自由基聚合方法,采用油溶性引发剂偶氮二异丁腈(AIBN),在聚(ε-已内酯)(PCL)纳米粒子表面引发聚合单体N-异丙基丙烯酰胺(NIPAM)和交联剂亚甲基双(丙烯酰胺)(MBA),制备得到了核-壳结构的PCL/PNIPAM聚合物纳米微球.系统研究了单体和交联剂用量、壳层目标交联度、初始PCL/DMF溶液的浓度及引发剂AIBN含量4个反应参数对核-壳结构PCL/PNIPAM纳米微球的PNIPAM壳层得率、微球尺寸、温敏性能及电镜形貌的影响.结果表明,在制备核-壳结构PCL/PNIPAM纳米微球的反应过程中,PCL粒子表面的聚合和水中的聚合二者之间相互竞争.适当增加引发剂AIBN的添加量,有利于制备得到核/壳比例可控的PCL/PNIPAM纳米微球;交联剂MBA较高的反应活性导致形成了非均匀交联的PNIPAM壳层.     

制备核-壳结构聚合物纳米微球和空心球的原位聚合方法的普适性研究

采用原位聚合制备核-壳结构聚合物纳米微球和空心球的新方法, 利用甲基丙烯酸2-羟丙酯(HPMA)和乙酸乙烯酯(VAc)两种单体, 在类似的反应条件下, 成功地制备了以聚(ε-己内酯)(PCL)为核, 分别以交联PHPMA和PVAc为壳的纳米微球; 将微球的核酶解后, 分别得到了对应的交联PMAA空心球和交联PVA空心球. 结果表明, 原位聚合制备核-壳结构聚合物微球的新方法具有一定的普适性, 适用于单体可溶于水而生成的聚合物不溶于水的体系.     

聚合物负载金属纳米粒子型核壳结构催化剂的研究

核壳结构聚合物负载型催化剂因其载体材料独特的结构、形貌和性质而具有优异的催化活性,成为了催化化学领域研究的热点。本文综述了聚合物负载金属纳米粒子型核壳结构催化剂,包括球形聚合物刷负载金属纳米粒子、聚合物中空微球负载金属纳米粒子、聚合物实心微球表面包覆金属纳米粒子等类型催化剂的制备及其相应的催化性能,强调了各类载体的组成和结构特点对催化活性及其稳定性的影响。最后总结了该类催化材料的优势和不足,并对其性能和应用进行了展望。     

无皂乳液聚合法制备聚甲基丙烯酸甲酯包覆厚度可控的纳米核-壳二氧化硅微球

用改进的Stöber法和无皂乳液聚合法制备窄分布的二氧化硅/PMMA核-壳纳米微球. 用改进的Stöber法将3-乙氧基甲基丙烯酸丙基硅烷(MPS)修饰在纳米的二氧化硅表面后, 用无皂乳液聚合法制备核-壳纳米微球. 该法简单有效且得到厚度均匀的聚合物包覆层. 随着单体MMA用量的增加, 用动态光散射法测量, PMMA壳层的厚度从6.4 nm增加到96.3 nm. 热重分析表明, PMMA的含量从22.25%增加到93.41%. 扫描电子显微镜和透射电子显微镜结果表明, 得到的是包覆良好、表面光滑的核-壳无机/聚合物纳米微球.     

刚性聚合物微球透明增韧聚苯乙烯

通过多步复合乳液聚合方法合成了一种具有核壳结构的刚性聚合物微球.不同粒径、用量及核层交联密度的核壳微粒(C-S)与聚苯乙烯(PS)共混得到PS/C-S复合材料.通过对其冲击强度及透明性的研究表明增韧PS的最佳条件是核壳微粒的粒径大于100nm,复合材料中的微粒含量在2%～5%,核层具有适当的交联度.在未影响材料透明性的前提下,材料的韧性比纯PS提高2倍     

Pickering乳滴模板法制备超粒子结构有机/无机杂化微球

Pickering乳滴模板法制备有机/无机杂化的核壳微球越来越引起人们的关注,主要因为该方法制备出的微球具有以无机粒子为壳层的超粒子结构(supracolloidal structure),能够赋予微球独特的功能.胶体粒子在乳滴表面自组装形成有序的球面胶体壳,得到稳定Pickering乳液,固定乳滴表面的胶体粒子来制备核壳结构的微球或者以胶体粒子为壳层的微胶囊(colloidosome).本文综述了我们课题组以Pickering乳滴模板法制备超粒子结构有机/无机杂化微胶囊包括实心微球方面的工作.我们选择具有不同性能、种类的胶体粒子以及具有不同性质和功能的核材料,采用Pickering乳滴模板法,对吸附在乳滴表面的胶体粒子用不同的固定方法制备具有不同结构和性能的微球和微胶囊,利用基于多重Pickering乳液的聚合技术制备双纳米复合的超粒子结构多核聚合物微球.     

交联核壳结构PBA/PS和PBA/PMMA纳米微球的制备与应用

考察了聚丙烯酸丁酯/聚苯乙烯(PBA/PS)以及聚丙烯酸丁酯/聚甲基丙烯酸甲酯(PBA/PMMA)交联核壳结构纳米高分子微球的制备方法,并对其在尼龙复合材料中的应用进行了初步研究.结果表明,通过交联剂的引入使粒子核层和壳层内部均形成了高度交联的结构,可以限制亲水性较小的聚苯乙烯(PS)壳层向粒子内部迁移的趋势;制备出的微球平均粒径为40~50 nm,粒径分布很窄.采用饥饿态加料方式加入第二单体不仅可以使微球具有较高的产率和凝胶率,而且可以使其具有更理想的核壳结构和更窄的粒径分布.此外,将合成出的PBA/PMMA核壳粒子对尼龙6基体进行复合的结果表明,由于该微球表面与尼龙6基体之间具有较强的界面相互作用且微球具有较大的形变能力,可以在基体中形成良好的分散,在保持材料强度的同时有效地提高了其刚性和韧性.     

油酸/PSt/TiO_2复合纳米微球的制备

纳米复合材料是近年来化学、物理及材料科学研究最活跃的领域之一 .有机 -无机复合纳米微球的制备和性能研究是这一研究领域的一个重要分支 .有机 -无机复合纳米微球兼有有机材料、无机材料和纳米材料的特性 ,特别是“球形”结构使其具有微观的“滚动”特性而倍受摩擦学工作者的青睐 .目前聚合物纳米微球的摩擦学性能研究已取得了重要进展 [1～ 4 ] .段标等 [3,5]认为聚合物微球的润滑机理是在摩擦过程中 ,微球进入摩擦表面 ,因其弹性和球形 ,而起到一定的滚动作用 ;高载荷下 ,微球变形并在摩擦表面形成聚合物润滑膜 .然而有关聚合物 /无机…     

基于3D受限自组装构筑中空介孔氧化硅/碳复合微球

发展简单、高效、可控的方法来制备中空介孔微球是介孔材料领域的研究热点.本工作结合嵌段共聚物的三维受限自组装(3D-CSA)和自模板碳化策略,建立了一种构筑中空介孔微球的新方法 .首先,采用乳液-溶剂挥发法实现嵌段共聚物与全氟辛烷(PFO)在3D受限空间的分级组装,获得了核-壳结构微球,其中壳层由微相分离的嵌段共聚物构成.然后,在壳层的连续相选择性地复合氧化硅,既实现了无机框架的负载,又实现了对连续相聚合物链选择性交联.对复合微球进行煅烧处理后,实现了壳层连续相聚合物的选择性碳化,获得了中空介孔氧化硅/碳复合微球.本研究系统地阐述了核-壳型分级结构微球的形成机理和必备条件,研究了氧化硅前驱体添加量和嵌段共聚物分子量对中空介孔氧化硅/碳复合微球形貌的影响,为制备中空介孔微球材料提供了一种简便、可控的方法.     

核壳结构金属-有机骨架的研究

核壳结构(core-shell)金属-有机骨架(metal-organic frameworks,MOFs)是多功能MOFs复合材料中最为典型的一类构型,是由MOFs材料和另一种材料(如MOFs、碳材料、无机化合物、有机聚合物等)组装形成的核壳结构,其中MOFs既可作核,亦可作壳。因结合了核层和壳层两种材料,核壳结构MOFs展现出了优于核层或者壳层的独特性能,例如结构稳定、选择性分离、气体吸附等,为MOFs材料实现工业化应用带来了新的潜力。本文综述了近年来核壳结构MOFs材料的研究进展,介绍了各类构型核壳结构MOFs材料(例如MOF@MOF、MOF@carbon、metal oxide@MOF、polymer@MOF等)的合成方法及应用研究,并对其今后的发展进行了展望。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.