Sterically bulky thioureas as air- and moisture-stable ligands for pd-catalyzed Heck reactions of aryl halides

We demonstrate that sterically bulky N,N'-disubstituted cyclic thiourea-Pd(0) complexes are air- and moisture-stable and highly active catalysts for palladium-catalyzed Heck reaction of aryl iodides and bromides with olefins (TONs up to 500000 for the reaction of PhI and methyl acrylate). Even activated aryl chlorides can undergo complete conversion in Bu(4)NBr in the presence of 1 mol % Pd catalyst.     

Synthesis,characterization and catalytic activity of polymer anchored transition metal complexes toward oxidation reactions

The polymer-anchored Schiff base complexes of Cu(II), Co(II), Ni(II), Mn(II) and Fe(III) were prepared by reacting polystyrene amine with 2-pyridinecarbaldehyde followed by loading of metal atom in methanol. These complexes were characterized by using different physico-chemical and spectroscopic methods. The catalytic activity of these polymer-supported metal catalysts was tested for the oxidation of various olefins and alcohols. Influence of various reaction parameters, such as reaction temperature, reaction time, oxidant, substrate-to-oxidant mole ratio and nature of solvent, was studied for the oxidation of cyclohexene with these catalysts. Among the catalysts studied, Cu-Cat showed higher catalytic activity toward oxidation reactions than the other catalysts. Moreover, hot filtration experiments proved that these catalysts are truly heterogeneous and can be reused a number of times without significant loss of activity.     

Carbonylation of Alkynes,Alkenes and Alcohols using Metal Complex Catalysts

Carbonylation of olefins, alcohols and halides using homogeneous as well as heterogeneous catalysts has been discussed. Highlights of contributions on the activity, selectivity and stability of catalysts for carbonylation reactions are discussed. Kinetics and mechanism including characterization of the intermediate catalytic species has also been reviewed. The performance of anchored Pd complexes on mesoporous supports (MCM-41 and MCM-48), water soluble Pd complexes and supported Pd catalysts in carbonylation of aryl alcohols and olefins has been discussed in the context of catalyst-product separation. Some aspects of kinetic modelling and reaction engineering of these multiphase catalytic reactions have also been reviewed.     

A simple and versatile method for alkene epoxidation using aqueous hydrogen peroxide and manganese salophen catalysts

We describe a simple and versatile method for the catalytic epoxidation of a broad range of olefins (e.g., ketones, esters, and alkyl halides) with aqueous H₂O₂ using manganese salophen catalysts. Low catalyst loading, short reaction times, and a simple reaction setup (e.g., no pH buffer is required) are salient features of the system, which unites the benefits of H₂O₂ as an oxidant with the versatility and modularity of salen-based catalysts.     

Highly active palladium/activated carbon catalysts for Heck reactions: correlation of activity, catalyst properties, and Pd leaching

A variety of palladium on activated carbon catalysts differing in Pd dispersion, Pd distribution, Pd oxidation state, and water content were tested in Heck reactions of aryl bromides with olefins. The optimization of the catalyst (structure-activity relationship) and reaction conditions (temperature, solvent, base, and Pd loading) allowed Pd/C catalysts with very high activity for Heck reactions of unactivated bromobenzene (turnover number (TON) approximately 18000, turnover frequency (TOF) up to 9000, Pd concentrations down to 0.005 mol %) to be developed. High Pd dispersion, low degree of reduction, sufficient content of water, and uniform Pd impregnation are criteria for the most active system. The catalysts combine high activity and selectivity under ambient conditions (air and moisture), easy separation (filtration), and quantitative recovery of palladium. Determination of Pd in solution after and during the reaction, and catalyst characterization before and after the reaction (transmission electron microscopy (TEM), X-ray diffraction (XRD)), indicate dissolution/reprecipitation of palladium during the reaction. The Pd concentration in solution is highest at the beginning of the reaction and is a minimum (< 1 ppm) at the end of the reaction. Palladium leaching correlates significantly with the reaction parameters.     

聚苯乙烯键合麻黄碱-Co(Ⅱ)络合物对烯烃环氧化反应的催化作用

聚苯乙烯键合麻黄碱 Ｃｏ（Ⅱ）络合物对烯烃环氧化反应的催化作用刘庆艳刘必前何纪纲（中国科学院化学研究所北京１０００８０）关键词环氧化，分子氧，烯烃，醛，高分子催化剂烯烃的环氧化反应是将烯烃进行氧化转化的重要反应［１］．由于高分子催化剂具有与反应...     

Heck reaction catalyzed by PD-modified zeolites.

[Pd]-exchanged NaY zeolites have been prepared, characterized, and applied for the first time for catalytic carbon-carbon coupling reactions. The catalysts exhibit a high activity and selectivity toward the Heck reaction of aryl bromides with olefins for small palladium concentrations (< or =0.1 mol % of Pd). The catalysts can easily be separated from the reaction mixture and reused after washing without loss in activity. No limitation to the diffusion of adducts in the zeolite cages was observed (for linear alkenes). The electronic nature of the aryl bromides and the olefins has a dominating effect on the reaction yield and selectivity. The heterogeneous catalysts quantitatively convert all types of all aryl bromide (complete conversion of bromobenzene within 30 min) and activated aryl chlorides under standard reaction conditions. Product form selectivity is observed in the Heck reaction with cyclic olefins.     

手性双唑啉铜配合物在不对称合成中的应用

综述了手性双E唑啉配体的主要结构类型,并讨论了手性双E唑啉铜配合物在不对称Diels-Alder反应、Ene反应、Mukaiyama adol反应、烯丙基氧化、环丙烷化、氮杂环丙烷化等反应中的应用。     

Highly selective ruthenium metathesis catalysts for ethenolysis

N-Aryl,N-alkyl N-heterocyclic carbene (NHC) ruthenium metathesis catalysts are highly selective toward the ethenolysis of methyl oleate, giving selectivity as high as 95% for the kinetic ethenolysis products over the thermodynamic self-metathesis products. The examples described herein represent some of the most selective NHC-based ruthenium catalysts for ethenolysis reactions to date. Furthermore, many of these catalysts show unusual preference and stability toward propagation as a methylidene species and provide good yields and turnover numbers at relatively low catalyst loading (<500 ppm). A catalyst comparison showed that ruthenium complexes bearing sterically hindered NHC substituents afforded greater selectivity and stability and exhibited longer catalyst lifetime during reactions. Comparative analysis of the catalyst preference for kinetic versus thermodynamic product formation was achieved via evaluation of their steady-state conversion in the cross-metathesis reaction of terminal olefins. These results coincided with the observed ethenolysis selectivities, in which the more selective catalysts reach a steady state characterized by lower conversion to cross-metathesis products compared to less selective catalysts, which show higher conversion to cross-metathesis products.     

Rationally designed pincer-type heck catalysts bearing aminophosphine substituents: Pd IV intermediates and palladium nanoparticles

The aminophosphine-based pincer complexes [C6H3-2,6-(XP(piperidinyl)2)2Pd(Cl)] (X=NH 1; X=O 2) are readily prepared from cheap starting materials by sequential addition of 1,1',1'-phosphinetriyltripiperidine and 1,3-diaminobenzene or resorcinol to solutions of [Pd(cod)(Cl)2] (cod=cyclooctadiene) in toluene under N2 in "one pot". Compounds 1 and 2 proved to be excellent Heck catalysts and allow the quantitative coupling of several electronically deactivated and sterically hindered aryl bromides with various olefins as coupling partners at 140 degrees C within very short reaction times and low catalyst loadings. Increased reaction temperatures also enable the efficient coupling of olefins with electronically deactivated and sterically hindered aryl chlorides in the presence of only 0.01 mol % of catalyst. The mechanistic studies performed rule out that homogeneous Pd 0 complexes are the catalytically active forms of 1 and 2. On the other hand, the involvement of palladium nanoparticles in the catalytic cycle received strong experimental support. Even though pincer-type Pd IV intermediates derived from 1 (and 2) are not involved in the catalytic cycle of the Heck reaction, their general existence as reactive intermediates (for example, in other reactions) cannot be excluded. On the contrary, they were shown to be thermally accessible. Compounds 1 and 2 show a smooth halide exchange with bromobenzene to yield their bromo derivatives in DMF at 100 degrees C. Experimental observations revealed that the halide exchange most probably proceeded via pincer-type Pd IV intermediates. DFT calculations support this hypothesis and indicated that aminophosphine-based pincer-type Pd IV intermediates are generally to be considered as reactive intermediates in reactions with aryl halides performed at elevated temperatures.     

A practical, fast, and high-yielding aziridination procedure using simple Cu(II) complexes containing N-donor pyridine-based ligands

Four-coordinate dichlorocopper(II) complexes derived from di(2-pyridyl)methanes or pyridine itself exhibit high catalytic activity in aziridination of regular olefins with PhINTs in weakly coordinating chloroform in the presence of 1-2 equiv of NaBArF4 (BArF4- = tetra[3,5-di(trifluoromethyl)phenyl]borate). High yields of aziridines exceeding 90% can be obtained with a 1:1 olefin/PhINTs ratio and 1-5 mol % catalyst loading for such reactive olefins as styrene, tri- and tetramethylethylene. For cis-cyclooctene, indene, methyl acrylate, methyl methacrylate, vinyl methyl ketone, tert-butylethylene, and neopentylethylene, as well as for 1-hexene and cyclopentene, yields of corresponding aziridines vary from 44% to 83%. The catalytic activity and efficiency of the reported copper complexes decrease moderately in the absence of NaBArF4.     

Ethylene Oligomerization Catalyzed by MCl2(PPh3)2 Complex‐es/Ethylaluminoxane

The catalytic properties of MCl₂ (PPh₃)₂ (M = Fe, A; Co, B; Ni, C) in combination with ethylaluminoxane (EAO) as cocatalyst for ethylene oligomerization have been investigated. Treatment of the MCl₂ (PPh₃)₂ complexes with EAO in toluene generated active catalysts in situ that are capable of oligomerizating ethylene to low‐carbon olefins. The catalytic activity and product distribution were affected by reaction condition, such as reaction temperature, the ratios of Al/M and the reaction time. The activity of 1.70 × 10⁵ g oligomers/ (mol Co. h) for the catalytic system of CoCl₂(PPh₃)₂ with EAO at 200°C was observed, with the selectivity of 91.1% to C_4–10 olefins and 70.7% to C_4–10 linear α‐olefins.     

Iron(III) porphyrin catalyzed aziridination of alkenes with bromamine-T as nitrene source

[reaction: see text] Iron(III) porphyrin complexes Fe(Por)Cl are effective catalysts for aziridination of alkenes using bromamine-T as the nitrene source. The catalytic system can operate under mild conditions with alkenes as limiting reagents. The aziridination reaction is general and suitable for a wide variety of alkenes, including aromatic, aliphatic, cyclic, and acyclic olefins, as well as alpha,beta-unsaturated esters. For 1,2-disubstituted olefins, the reactions proceeded with moderate to low stereospecificity.     

Fe_2O_3／ZrO_2催化剂上一氧化碳加氢反应制低碳烯烃──I．催化剂反应性能及反应过程中铁物相的变化

用浸渍法制得一系列不同铁负载量的Ｆｅ２Ｏ３／ＺｒＯ２催化剂，应用催化反应评价结合穆斯堡尔谱对催化剂的ＣＯ加氢反应性能、催化剂活性相结构及催化剂铁物种在合成气反应过程中的物相变化进行了研究．结果表明，铁负载量的大小对于Ｆｅ２Ｏ３／ＺｒＯ２催化剂的Ｆ－Ｔ反应催化性能有很大影响，铁负载量适当时，Ｆｅ２Ｏ３／ＺｒＯ２催化剂铁锆间适当的强相互作用使得催化剂在保持较高催化活性的同时高选择性地生成低碳烯烃，产物分布偏离Ｓｃｈｕｌｚ－Ｆｌｏｒｙ分布规律．     

Pincer Thioamide and Pincer Thioimide Palladium Complexes Catalyze Highly Efficient Negishi Coupling of Primary and Secondary Alkyl Zinc Reagents at Room Temperature

Pincer thioamide Pd^II complex 2 was prepared, and its reaction with cyclohexylzinc chloride yielded novel pincer thioimide Pd^II complex 3 besides Pd⁰ species. The structures of complexes 2 and 3 were confirmed by X‐ray analysis. Both complexes are efficient catalysts for Negishi couplings involving primary and secondary alkyl zinc reagents bearing β‐hydrogen atoms. At a concentration of 0.1–0.5 mol % both catalysts readily promoted reactions at room temperature or even at 0 °C. The operational simplicity of these processes, in conjunction with the easy accessibility of both catalysts and substrates, promises synthetic utility of this new methodology. An experiment on a scale of 19.35 g carried out at very low catalyst loading of 2 (turnover number: 6 100 000) highlighted the potential application of the catalytic system. Monoalkyl and dialkyl zinc reagents displayed different reactivities and selectivities in reactions with aryl iodides catalyzed by complexes 2 or 3 , and isomerization in reactions involving acyclic secondary alkyl zinc derivatives was suppressed by using appropriate amounts of dialkyl zinc reagents. Based on preliminary kinetic profiles and reaction evidence, three possible pathways are proposed for the reactions involving acyclic secondary alkyl zinc reagents to rationalize the difference between mono‐alkyl and dialkyl zinc derivatives.     

Iron‐Catalyzed Direct Diazidation for a Broad Range of Olefins

Reported herein is a new iron‐catalyzed diastereoselective olefin diazidation reaction which occurs at room temperature (1–5 mol % of catalysts and d.r. values of up to >20:1). This method tolerates a broad range of both unfunctionalized and highly functionalized olefins, including those that are incompatible with existing methods. It also provides a convenient approach to vicinal primary diamines as well as other synthetically valuable nitrogen‐containing building blocks which are difficult to obtain with alternative methods. Preliminary mechanistic studies suggest that the reaction may proceed through a new mechanistic pathway in which both Lewis acid activation and iron‐enabled redox‐catalysis are crucial for selective azido‐group transfer.     

纳米SnO2高效催化烯烃与H2O2环氧化反应研究

构建了用于催化烯烃与过氧化氢环氧化反应的高效、 绿色催化反应体系. 首先, 通过水热合成法制备了纳米SnO₂, 并在320 ℃下煅烧. 随后, 对所有催化剂进行X射线衍射(XRD)、 紫外-可见漫反射光谱(UV-Vis)、 傅里叶变换红外光谱(FTIR)、 扫描电子显微镜(SEM)和透射电子显微镜(TEM)表征. 进一步将催化剂用于以H₂O₂水溶液为氧化剂环氧化各种官能化烯烃(包括环烯烃, 苯乙烯和直链烯烃)的反应, 以高转化率和高选择性得到了环氧化物. 在相似的反应条件下, 发现合成的纳米SnO₂-170催化剂在催化1-甲基环己烯与H₂O₂的环氧化反应中的活性最佳, 在2 h内1-甲基环己烯的转化率达到100%, 环氧化物选择性达到100%.     

轻烃在改性ZSM－5催化剂上转化成芳烃与低碳烯烃的选择性控制

研究了Ｃ３－Ｃ９烷烃在不同的改性ＺＳＭ－５沸石上的反应规律．过渡金属离子改性的ＺＳＭ－５沸石显示了较高的芳烃选择性，芳烃的选择性还取决于改性金属离子的脱氧能力并可通过预硫化得到改进．钾、钡改性的沸石显示了较高的烯烃选择性，增加钾含量，烯烃选择性显著提高，但也明显抑制了催化剂的活性；提高Ｂａ含量，同样可提高烯烃选择性，但对活性影响不大．环己烯的模型反应结果表明，Ｋ，Ｂａ的作用在于抑制了双分子氢转移反应和提高了脱氢能力．红外表征结果表明，沸石表面的羟基，因不同金属改性而发生不同的变化．此外，气相氧对提高烯烃和芳烃的收率有明显作用     

Nickel-catalyzed cross-coupling of silyl enol ethers with grignard reagents. Regio- and stereocontrolled synthesis of olefins

The substitution of the siloxy group in silyl enol ethers with Grignard reagents to form olefins is accomplished by use of nickel acetylacetonate or phosphine-nickel complexes as catalysts, the stereo- and regiochemistry of coupled olefins depending upon the nature of the catalyst and reaction conditions employed.     

Highly efficient and excellent reusable catalysts of molybdenum(VI) complexes grafted on ZPS‐PVPA for epoxidation of olefins with tert‐BuOOH

Four new kinds of heterogeneous catalysts for olefins epoxidation were obtained by grafting diamines on organic polymer–inorganic hybrid material, zirconium poly (styrene‐phenylvinylphosphonate)‐phosphate (ZPS‐PVPA), and subsequently coordinating with Schiff base Mo(VI) complexes. The catalysts were characterized by IR, XPS, SEM and TEM. All catalysts were evaluated through the epoxidation of olefins using tert‐BuOOH as oxidant. The heterogeneous catalysts possess the advantages of high conversion, selectivity and excellent reusability. The catalysts were easily separated from the reaction systems and could be reused 13 times without significant loss of catalytic activity. Copyright © 2010 John Wiley & Sons, Ltd.