Ultrasensitive fluorescence protein detection in isoelectric focusing gels using a ruthenium metal chelate stain

SYPRO Ruby IEF Protein Gel Stain is an ultrasensitive, luminescent stain optimized for the analysis of protein in isoelectric focusing gels. Proteins are stained in a ruthenium-containing metal complex overnight and then rinsed in distilled water for 2 h. Stained proteins can be excited by ultraviolet light of about 302 nm (UV-B transilluminator) or with visible light of about 470 nm. Fluorescence emission of the dye is maximal at approximately 610 nm. The sensitivity of the SYPRO Ruby IEF protein gel stain is superior to colloidal Coomassie blue stain and the highest sensitivity silver staining procedures available. The SYPRO Ruby IEF protein gel stain is suitable for staining proteins in nondenaturing or denaturing carrier ampholyte isoelectric focusing and immobilized pH gradient gel electrophoresis. The stain is compatible with N,N'-methylenebisacrylamide or piperazine diacylamide cross-linked polyacrylamide gels as well as with agarose gels and high tensile strength Duracryl gels. The stain does not contain extraneous chemicals (formaldehyde, glutaraldehyde, Tween-20) that frequently interfere with peptide identification in mass spectrometry. Successful identification of stained proteins by peptide mass profiling is demonstrated.     

Quantitative evaluation of proteins in one- and two-dimensional polyacrylamide gels using a fluorescent stain

The characteristics of protein detection and quantitation with SYPRO Ruby protein gel stain in one- and two-dimensional polyacrylamide gels were evaluated. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analyses of three different purified recombinant proteins showed that the limits of detection were comparable to the limits of detection with ammoniacal silver staining and were protein-specific, ranging from 0.5 to 5 ng. The linearity of the relationship between protein level and SYPRO Ruby staining intensity also depended on the individual protein, with observed linear dynamic ranges of 200-, 500-, and, 1000-fold for proteins analyzed by SDS-PAGE. SYPRO Ruby protein gel stain was also evaluated in two-dimensional electrophoretic (2-DE) analysis of Escherichia coli proteins. The experiment involved analysis of replicates of the same sample as well as dilution of the sample from 0.5 to 50 nug total protein across gels. In addition to validating the 2-DE system itself, the experiment was used to evaluate three different image analysis programs: Z3 (Compugen), Progenesis (Nonlinear Dynamics), and PDQuest (Bio-Rad). In each program, we analyzed the 2-DE images with respect to sensitivity and reproducibility of overall protein spot detection, as well as linearity of response for 20 representative proteins of different molecular weights and pI. Across all three programs, coefficients of variation (CV) in total number of spots detected among replicate gels ranged from 4 to 11%. For the 20 representative proteins, spot quantitation was also comparable with CVs for gel-to-gel reproducibility ranging from 3 to 33%. Using Progenesis and PDQuest, a 1000-fold linear dynamic range of SYPRO Ruby was demonstrated with a single known protein. These two programs were more suitable than Z3 for examining individual protein spot quantity across a series of gels and gave comparable results.     

Background-free, high sensitivity staining of proteins in one- and two-dimensional sodium dodecyl sulfate-polyacrylamide gels using a luminescent ruthenium complex

SYPRO Ruby dye is a permanent stain comprised of ruthenium as part of an organic complex that interacts noncovalently with proteins. SYPRO Ruby Protein Gel Stain provides a sensitive, gentle, fluorescence-based method for detecting proteins in one-dimensional and two-dimensional sodium dodecyl sulfate-polyacrylamide gels. Proteins are fixed, stained from 3h to overnight and then rinsed in deionized water or dilute methanol/acetic acid solution for 30 min. The stain can be visualized using a wide range of excitation sources commonly used in image analysis systems including a 302 nm UV-B transilluminator, 473 nm second harmonic generation (SHG) laser, 488 nm argon-ion laser, 532 nm yttrium-aluminum-garnet (YAG) laser, xenon arc lamp, blue fluorescent light bulb or blue light-emitting diode (LED). The sensitivity of SYPRO Ruby Protein Gel Stain is superior to colloidal Coomassie Brilliant Blue (CBB) stain or monobromobimane labeling and comparable with the highest sensitivity silver or zinc-imidazole staining procedures available. The linear dynamic range of SYPRO Ruby Protein Gel stain extends over three orders of magnitude, which is vastly superior to silver, zinc-imidazole, monobromobimane and CBB stain. The fluorescent stain does not contain superfluous chemicals (formaldehyde, glutaraldehyde, Tween-20) that frequently interfere with peptide identification in mass spectrometry. While peptide mass profiles are severely altered in protein samples prelabeled with monobromobimane, successful identification of proteins by peptide mass profiling using matrix-assisted laser desorption/ionization mass spectrometry was easily performed after protein detection with SYPRO Ruby Protein Gel stain.     

A comparison of silver stain and SYPRO Ruby Protein Gel Stain with respect to protein detection in two-dimensional gels and identification by peptide mass profiling

Proteomic projects are often focused on the discovery of differentially expressed proteins between control and experimental samples. Most laboratories choose the approach of running two-dimensional (2-D) gels, analyzing them and identifying the differentially expressed proteins by in-gel digestion and mass spectrometry. To date, the available stains for visualizing proteins on 2-D gels have been less than ideal for these projects because of poor detection sensitivity (Coomassie blue stain) or poor peptide recovery from in-gel digests and mass spectrometry (silver stain), unless extra destaining and washing steps are included in the protocol. In addition, the limited dynamic range of these stains has made it difficult to rigorously and reliably determine subtle differences in protein quantities. SYPRO Ruby Protein Gel Stain is a novel, ruthenium-based fluorescent dye for the detection of proteins in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) gels that has properties making it well suited to high-throughput proteomics projects. The advantages of SYPRO Ruby Protein Gel Stain relative to silver stain demonstrated in this study include a broad linear dynamic range and enhanced recovery of peptides from in-gel digests for matrix assisted laser desorption/ionization-time of flight (MALDI-TOF) mass spectrometry.     

Comparison of fluorescent stains: relative photostability and differential staining of proteins in two-dimensional gels

The fluorescence of proteins stained with Deep Purple and SYPRO Ruby was measured over a time course of UV transillumination to determine the relative photostability of each stain. Mean spot fluorescence (n = 200 matched spots) in gels stained with Deep Purple decreased 27% following 2 min of UV transillumination, compared to SYPRO Ruby, which decreased 17%. After 19 min, an 83% decrease in Deep Purple fluorescence was observed, compared to 44% for SYPRO Ruby. By interpolation, the half-life of Deep Purple fluorescence was estimated to be approximately 6 min. The half-life of SYPRO Ruby fluorescence was not reached during the 19 min time course. Further, differential staining of proteins was observed in gels stained with Deep Purple and SYPRO Ruby as compared to colloidal Coomassie Brilliant Blue and silver staining.     

Postelectrophoretic staining of proteins separated by two-dimensional gel electrophoresis using SYPRO dyes

While the classical silver stain has been the method of choice for high sensitivity protein visualization on two-dimensional gel electrophoresis (2-D PAGE), post-electrophoretic fluorescent staining with the SYPRO group of dyes has emerged to challenge silver staining for proteome analysis. The latter offers improved sensitivity, higher dynamic range and easy handling. However, most of the published data were derived from analysis of 1-D gel separations. In this work, we have focused on three commercially available fluorescent dyes, SYPRO Ruby, SYPRO Orange and SYPRO Red (Molecular Probes, Eugene, OR, USA) and studied their sensitivity and dynamic range on 2-D PAGE. The use of a multiwavelength fluorescent scanner to image 2-D protein profiles visualized with fluorescent staining is discussed, and a detailed comparison with analysis by silver staining is also provided. These results demonstrate the advantages of using SYPRO dyes, which are in agreement with the literature based on 1-D gel electrophoresis, and give a more realistic understanding of the performance of these fluorescent dyes with 2-D PAGE.     

Simultaneous, two-color fluorescence detection of total protein profiles and beta-glucuronidase activity in polyacrylamide gel

A dichromatic method for measuring the specific activity of beta-glucuronidase from complex cell homogenates or partially purified protein fractions is presented. Dual fluorescence is achieved by using the green emitting fluorogenic substrate ELF 97 beta-D-glucuronide to detect beta-glucuronidase activity, followed by the red emitting SYPRO Ruby protein gel stain or SYPRO Ruby IEF gel stain to detect the remaining proteins in the electrophoretic profile. Both ELF 97 alcohol, the highly fluorescent hydrolytic product generated from the enzyme substrate, and the SYPRO Ruby total protein stains are maximally excited by ultraviolet illumination. ELF 97 alcohol emits maximally at 525 nm while the SYPRO Ruby dyes emit maximally at 610 nm. Since ELF 97 beta-glucuronide is a precipitating substrate, it allows precise localization of beta-glucuronidase activity with minimal band diffusion. The staining method is simple and direct, without the requirement for ancillary coupling reactions. Dichromatic protein detection is demonstrated after sodium dodecyl sulfate(SDS)-polyacrylamide gel electrophoresis, carrier ampholyte-mediated isoelectric focusing or two-dimensional gel electrophoresis.     

Functional characterization of two-dimensional gel-separated proteins using sequential staining

Proteins separated by two-dimensional (2-D) gel electrophoresis can be visualized using various protein staining methods. This is followed by downstream procedures, such as image analysis, gel spot cutting, protein digestion, and mass spectrometry (MS), to characterize protein expression profiles within cells, tissues, organisms, or body fluids. Characterizing specific post-translational modifications on proteins using MS of peptide fragments is difficult and labor-intensive. Recently, specific staining methods have been developed and merged into the 2-D gel platform so that not only general protein patterns but also patterns of phosphorylated and glycosylated proteins can be obtained. We used the new Pro-Q Diamond phosphoprotein dye technology for the fluorescent detection of phosphoproteins directly in 2-D gels of mouse leukocyte proteins, and Pro-Q Emerald 488 glycoprotein dye to detect glycoproteins. These two fluorescent stains are compatible with general protein stains, such as SYPRO Ruby stain. We devised a sequential procedure using Pro-Q Diamond (phosphoprotein), followed by Pro-Q Emerald 488 (glycoprotein), followed by SYPRO Ruby stain (general protein stain), and finally silver stain for total protein profile. This multiple staining of the proteins in a single gel provided parallel determination of protein expression and preliminary characterization of post-translational modifications of proteins in individual spots on 2-D gels. Although this method does not provide the same degree of certainty as traditional MS methods of characterizing post-translational modifications, it is much simpler, faster, and does not require sophisticated equipment and expertise in MS.     

Improved detection of lymphocyte membrane proteins in purified form and as a crude mixture using native and denaturing polyacrylamide gel electrophoresis by optimisation of coomassie brilliant blue and silver staining.

Optimised silver staining protocols were devised for the detection of membrane proteins in purified form and as a crude mixture. These were adduced in both sodium dodecyl sulphate (SDS) and native polyacrylamide gel electrophoresis and consisted of ethanol-acetic acid-formaldehyde fixation, Coomassie Brilliant Blue prestaining, Rapidfix pretreatment, formaldehyde enhancement and finally ammoniacal silver staining. With these modifications, numerous staining problems of membrane proteins were overcome. These included reduction in background staining, enhanced detection sensitivity in native gels, elimination of negative staining and the avoidance of metallic silver deposition on the gel surface. In overcoming these problems, some factors determining the colour and stainability of membrane proteins in their native state were determined. Both the anionic Coomassie Brilliant Blue dye and SDS detergent improved the sensitivity of silver staining in native gels, and ammoniacal silver was more sensitive than neutral silver, suggesting silver staining to be a charge dependent process.     

Optimized conditions for diluting and reusing a fluorescent protein gel stain

This study elucidates the optimum conditions at the minimum cost for using SYPRO Ruby protein gel stain. It deals with the effects of gel fixation and staining times, as well as dilution and reuse of SYPRO Ruby protein gel stain in one-dimensional (1-D) gels. Signal strength and dynamic range were highest in gels that were fixed thoroughly before staining, followed by overnight staining. Using the optimized protocol, dilution or reuse of the stain reduces the dynamic range and signal intensity. Sensitivity remains high if the stain is reused up to two times, but signal intensity is reduced up to 2.5-fold in twice used stain. Sensitivity also remains high if the stain is diluted 1:2 in water, but signal intensity is reduced up to 6-fold. Of the two options, reuse or dilution, reuse better retains signal intensity and dynamic range.     

A statistical comparison of silver and SYPRO Ruby staining for proteomic analysis

Silver staining has been the method most commonly employed for high sensitivity staining of proteins following two-dimensional gel electrophoresis. Whilst this method offers detection in the nanogram range it does have major drawbacks including a lack of linearity, nonstoichiometric staining of proteins, a lack of compatibility with the microchemical preparation of proteins for identification by mass spectrometric techniques, and a highly subjective assessment of the staining endpoint. SYPRO Ruby is a relatively new, ruthenium complex-based stain which is reported to offer advantages over silver, particularly in overcoming the limitations cited above. We describe a series of experiments where several protein staining procedures commonly employed are compared. To enable optimization of the in situ digestion procedure, a statistical approach has been undertaken. The effects of a variety of staining, digestion, and analysis protocols on the downstream processing of a test radiolabeled protein were studied. The data confirms that as well as offering sensitivity similar to silver, SYPRO Ruby staining is reproducible, linear, and offers a higher level of compatibility with the identification of proteins by mass spectrometry.     

Alternative methods for fixing and staining gliadins in polyacrylamide gels.

Staining efficiencies of Coomassie Brilliant Blue G-250 (CBB G-250) and Coomassie Brilliant Blue R-250 (CBB R-250) in various media were studied in efforts to reduce or eliminate requirements for trichloroacetic acid (TCA). Stained gels were compared with gels stained with CBB R-250 in 12% TCA and evaluated for overall stain and background. Because of qualitative effects, stain intensities of low- and high-mobility gliadins were also evaluated. Results indicated gliadins are fixed under a wide range of conditions, permitting adjustment of conditions to provide optimum staining. CBB G-250 and R-250 in tap water fixed and stained most gliadins. Best results were obtained with CBB G-250 in 2% TCA, in 2% TCA containing 5% sodium sulfate, and in 2% and 5% phosphoric acid containing 5% sodium chloride or 5% sodium sulfate. Gels stained in these media were more easily observed during staining and more easily destained than gels stained in CBB R-250 in 12% TCA.     

Design and synthesis of new fluorescent probe for rapid and highly sensitive detection of proteins via electrophoretic gel stain

A new fluorescent molecular probe, 2,2′‐(1E,1′E)‐2,2′‐(4‐(dicyanomethylene)‐4H‐pyrane‐2,6‐diyl)bis(ethene‐2,1‐diyl)bis(sodium benzenesulfonate) salt ( 1 ), possessing the cyanopyranyl moieties and two benzene sulfonic acid groups was designed and synthesized to detect proteins in solution and for high‐throughput SDS‐PAGE. Compound 1 exhibited no fluorescence in the absence of proteins; however, it exhibited strong fluorescence on the addition of bovine serum albumin as a result of intramolecular charge transfer. Compared with the conventional protocols for in‐gel protein staining, such as SYPRO Ruby and silver staining, 1 achieves higher sensitivity, even though it offers a simplified, higher throughput protocol. In fact, the total time required for protein staining was 60–90 min under optimum conditions much shorter than that required by the less‐sensitive silver staining or SYPRO Ruby staining protocols. Moreover, 1 was successfully applied to protein identification by mass spectrometry via in‐gel tryptic digestion, Western blotting, and native PAGE together with protein staining by 1 , which is a modified protocol of blue native PAGE (BN‐PAGE). Thus, 1 may facilitate high‐sensitivity protein detection, and it may be widely applicable as a convenient tool in various scientific and medical fields.     

Comparison of automated in-gel digest methods for femtomole level samples

A comparison of automated in-gel digestion methods for low picomolar to femtomolar levels of protein is presented. Gel spots with 4 pmol to 120 fmol of protein were stained with either Coomassie colloidal blue or SYPRO Ruby and digested using an automated platform. The sequence coverages and average peak intensities obtained from a matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-MS) analysis are compared. Results show that methods using an acetonitrile extraction or digest times greater than the standard 4 h give no significant increase in peptide sequence coverage for automated digestion of low protein level samples. It is also shown that digests from SYPRO Ruby-stained gels show a greater improvement upon ZipTip cleanup than digests from Coomassie colloidal blue-stained gels. The digests from SYPRO Ruby-stained gels are also shown to give a higher average peptide intensity if a method with minimal gel plug washing is used.     

Mass spectrometry compatibility of two-dimensional gel protein stains

As proteomic technology evolves, protein staining sensitivity is constantly being improved, enabling researchers to better visualize the proteome of their system. The current challenge is to balance the limits of detection of protein visualization with those of the mass spectrometric methods. In this report, mass spectra generated from human serum or rat liver proteins stained with either colloidal Coomassie blue, Daiichi silver, SYPRO Orange, SYPRO Red, SYPRO Ruby, or SYPRO Tangerine are compared. It has been concluded that the newest generation of fluorescent protein stains, compared with traditional staining methods, are more compatible to matrix-assisted laser desorption/ionization (MALDI) and liquid chromatography-tandem mass spectrometry (LC-MS/MS) methods. The number of database matches obtained using each mass spectrometry method and the percent sequence coverage obtained from trypsin digested proteins stained using these six methods is provided.     

Fluorescence detection of proteins in sodium dodecyl sulfate-polyacrylamide gels using environmentally benign, nonfixative, saline solution

SYPRO Tangerine stain is an environmentally benign alternative to conventional protein stains that does not require solvents such as methanol or acetic acid for effective protein visualization. Instead, proteins can be stained in a wide range of buffers, including phosphate-buffered saline or simply 150 mM NaCl using an easy, one-step procedure that does not require destaining. Stained proteins can be excited by ultraviolet light of about 300 nm or with visible light of about 490 nm. The fluorescence emission maximum of the dye is approximately 640 nm. Noncovalent binding of SYPRO Tangerine dye is mediated by sodium dodecyl sulfate (SDS) and to a lesser extent by hydrophobic amino acid residues in proteins. This is in stark contrast to acidic silver nitrate staining, which interacts predominantly with lysine residues or Coomassie Blue R, which in turn interacts primarily with arginine and lysine residues. The sensitivity of SYPRO Tangerine stain is similar to that of the SYPRO Red and SYPRO Orange stains - about 4-10 ng per protein band. This detection sensitivity is comparable to colloidal Coomassie blue staining and rapid silver staining procedures. Since proteins stained with SYPRO Tangerine dye are not fixed, they can easily be eluted from gels or utilized in zymographic assays, provided that SDS does not inactivate the protein of interest. This is demonstrated with in-gel detection of rabbit liver esterase activity using alpha-naphthyl acetate and Fast Blue BB dye as well as Escherichia coli beta-glucuronidase activity using ELF-97 beta-D-glucuronide. The dye is also suitable for staining proteins in gels prior to their transfer to membranes by electroblotting. Gentle staining conditions are expected to improve protein recovery after electroelution and to reduce the potential for artifactual protein modifications such as the alkylation of lysine and esterification of glutamate residues, which complicate interpretation of peptide fragment profiles generated by mass spectrometry.     

Fluorescent staining of protein in SDS polyacrylamide gels by salicylaldehyde azine

As a noncovalent fluorescence probe, in this study, salicylaldehyde azine (SA) was introduced as a sensitive fluorescence‐based dye for detecting proteins both in 1D and 2D polyacrylamide electrophoresis gels. Down to 0.2 ng of single protein band could be detected within 1 h, which is similar to that of glutaraldehyde‐silver stain, but approximately four times higher than that of SYPRO Ruby fluorescent stain. Furthermore, comparative analysis of the MS compatibility of SA stain with SYPRO Ruby stain indicated that SA stain is compatible with the downstream of protein identification by LC‐MS/MS. Additionally, the probable mechanism of the SA stain was investigated by molecular docking. The results demonstrated that the interaction between SA and protein was mainly contributed by hydrogen bonding and hydrophobic forces.     

The simplified technique of high resolution two-dimensional polyacrylamide gel electrophoresis: biomedical applications in health and disease

The application of our simplified technique of high resolution two-dimensional polyacrylamide gel electrophoresis (2-D PAGE) to human body fluids is reviewed. Serum/plasma protein changes associated with alcohol abuse, familial dyslipoproteinemia ("fish-eye" disease), and myocardial infarction are demonstrated. High resolution 2-D PAGE of amniotic fluid, cerebrospinal fluid, urine, and saliva is shown with reference to the work of others, and the detection of pink-violet staining "lumicarmines" in sweat and tear fluid is reported for the first time. General aspects relating to the methodology are discussed. These include sample preparation, the choice of electrophoresis conditions (denaturing or nondenaturing) and detection method (Coomassie Brilliant Blue or silver), and the effects of native protein pretreatment with sodium dodecyl sulfate prior to silver staining or isoelectric focusing gel shrinkage in glycerol prior to second-dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis.     

Novel procedure for the identification of proteins by mass fingerprinting combining two-dimensional electrophoresis with fluorescent SYPRO red staining

The fluorescent sensitive SYPRO Red dye was successfully employed to stain proteins in two-dimensional gels for protein identification by peptide mass fingerprinting. Proteins which are not chemically modified during the SYPRO Red staining process are well digested enzymatically in the gel and hence the resulting peptides can be efficiently eluted and analysed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). A SYPRO Red two-dimensional gel of a complex protein extract from Candida albicans was analysed by MALDI-TOF MS. The validity of SYPRO Red staining was demonstrated by identifying, via peptide mass fingerprinting, 10 different C. albicans proteins from a total of 31 selected protein spots. The peptide mass signal intensity, the number of matched peptides and the percentage of coverage of protein sequences from SYPRO Red-stained proteins were similar to or greater than those obtained in parallel with the modified silver protein gel staining. This work demonstrates that fluorescent SYPRO Red staining is compatible with the identification of proteins separated on polyacrylamide gel and that it can be used as an alternative to silver staining. As far as we know, this is the first report in which C. albicans proteins separated using 2-D gels have been identified by peptide mass fingerprinting. The improved technique described here should be very useful for carrying out proteomic studies.     

Rapid and easy protein staining for SDS-PAGE using an intramolecular charge transfer-based fluorescent reagent

High-performance staining for 1-D and 2-D SDS-PAGE was carried out using a novel protein-binding fluorophore (Dye 1), which noncovalently interacts with proteins and provides a fluorescence emission response to proteins by intramolecular charge transfer. In order to achieve the high-throughput analysis of proteins for SDS-PAGE, the general protocols for in-gel protein staining (SDS-PAGE, fixation, staining, washing, and detection) were simplified to produce an easy and rapid protocol (SDS-PAGE together with staining, washing, and detection). This method was performed by preparation of an electrophoresis buffer containing Dye 1 under optimum conditions, and by the binding of Dye 1 to proteins in the gel during the SDS-PAGE. As a result, this study required only 15 min for protein staining as a minimum time. On the other hand, it takes several hours for the general protein staining method, such as SYPRO Ruby staining (18 h) and CBB staining (105 min). Moreover, the protein-to-protein variation was low, and the detection limit was 7.0 ng/band of BSA (S/N = 3.0) in this method, which was as sensitive as the short-protocol silver staining methods. On the basis of these results, this rapid and easy protocol for SDS-PAGE using Dye 1 may be widely applicable and convenient for users in the various scientific and medical fields.