Application of non-linear heterogeneity-based isotherm models for characterizing sorption of Cs and Se on mudrocks

It plays a very important role for characterizing sorption behaviors of cesium (Cs) and selenium (Se) on Taiwanese mudrocks to retard the migration of radionuclides from a radioactive waste repository. In this study, two non-linear heterogeneity-based isotherms, Langmuir–Freundlich model (LF) and generalized-Freundlich model (GF), were applied for the evaluation of the sorption characteristics of Cs and Se on Taiwanese mudrocks. The batch sorption experiments were carried out and the experimental data were simulated by LF and GF heterogeneity-based isotherm models. In addition, the results showed that both of the LF and GF models could fit the experimental data more perfectly than the Langmuir one. The heterogeneity of sorption behaviors for Cs and Se could be well characterized by the LF and GF models from the root mean square error calculation and plot of the affinity spectrum. The results demonstrated that the sorption mechanism of Cs and Se on mudrock is quite different and Cs sorption is more heterogeneous and complicated than that in Se.     

Sorption of cesium from aqueous solutions using polymer supported bentonite

Polyacrylonitrile supported bentonite (PAN-B) was prepared, characterized and used for adsorption of cesium from aqueous solutions through batch and column techniques. Different techniques were used for characterization of the prepared adsorbent as surface area, swelling properties, FTIR and SEM. The effect of pH, contact time, sorbent dose and the initial cesium concentration on the uptake percent of Cs from aqueous solution were studied. The equilibrium sorption data were described by the Temkin and Flory–Huggins isotherm models and the results could fit more with Temkin model with correlation coefficient 0.997. The effect of temperature on the sorption behavior was studied and the thermodynamic parameters were calculated and showed the exothermic nature of sorption reaction with ΔH_o = ?69.38 kJ/mol. Fixed bed studies were performed, the breakthrough of PAN-B column was studied at different conditions and the breakthrough capacity was calculated.     

Sorption of cesium on composite sorbents based on nickel ferrocyanide

Composite sorbents based on potassium nickel ferrocyanide embedded in silica gel matrix were prepared and characterised by powdered X-ray diffraction analysis, IR spectra, Mössbauer spectra and electron microscopy. The sorbent exhibits very good efficiency for cesium uptake and radiation resistance. The sorption capacity for cesium ions is comparable with the capacity for the pure ferrocyanides.     

Sorption of cesium on montmorillonite and effects of salt concentration

The sorption behavior of cesium on montmorillonite type clay was studied by using radioactivity measurements. Concentrations of Cs⁺ ions ranged from 10^–6 to 10^–2M. Cesium retention reduced with increasing salt concentration which was varied between 10^–4 and 10^–1M. Selectivity coefficients K_Cs–Na for the exchange between Cs and Na were calculated for different equivalent fractions of Cs on the solid phase. Using theK _Cs–Na values, free energy change was found to be 7.8 kJ/mol. The data could be fitted to a Freundlich isotherm, and empirical Freundlich parameters enabled the generation of a site distribution function. By fitting the data to the Dubinin-Radushkevich (D-R) isotherm, a mean energy of sorption of 8.6 kJ/mole was calculated which corresponds to the energy of ion exchange reactions. The values of energy changes calculated by using two different methods were in good agreement.     

Sorption capacity of cesium on different forest and agricultural soils

Journal of Radioanalytical and Nuclear Chemistry - To investigate the sorption capacity of cesium on different forest and agricultural soils, batch sorption experiment was conducted. The Freundlich...     

Sorption of cesium ions by nanostructured calcium aluminosilicates

Data on the sorption properties of synthetic calcium aluminosilicates (CASes) with Al: Si ratios of 2: 2, 2: 6, and 2: 10, fabricated within the multicomponent system CaCl₂–AlCl₃–KОН–SiO₂–H₂O, are presented. Isotherms of the sorption of Cs⁺ ions from aqueous solutions with Cs⁺ concentrations of 0.2 to 6.0 mmol L^–1 are analyzed. The CAS maximum sorption capacity and the Langmuir constants are determined. Kinetic data are obtained, and the energy of cation-exchange activation upon the sorption of Cs⁺ ions is determined. The effect of a salt background (1% KCl + 6% NaCl) has on the values of distribution coefficient (K_d) and the degree of Cs⁺ ion removal is established.     

Sorption of zinc and cadmium on zeolite rocks

The sorption of zinc and cadmium on zeolite rocks from different locations in Bulgaria is studied. The basic equilibrium and kinetic parameters are determined. It has been found that the clinoptilolite rock from the location Bali plast may be used as a sorbent for zinc and cadmium.     

Sorption of cesium radionuclides with composite carbon fibrous materials

Sorption of composite sorbents produced by a combined method of thermal treatment and electrochemical and chemical deposition of transition metal ferrocyanides stabilized with latex emulsions onto a fibrous carbon matrix for cesium radionuclides was studied.     

Sorption of cesium from aqueous waste solution on a SuperLigÒ644 resin

Summary The removal of cesium from aqueous waste solution was investigated in a column setup using a relatively coarse SuperLig^ò644 resin. The bed volume (BV=140) at the onset of breakthrough surpassed the design requirement of 100 BV at 50% breakthrough, and also corresponds to 99.96% cesium removal. Cesium elution with 0.5M HNO₃was satisfactory with a peak BV of 2.5. The elution BV for C/C₀=0.01 was 10, which is less than the target of 15 BV. The percent of sorbed cesium eluted was 99.88%. Further, the BV of the various solutions used for the supporting process steps was sufficient.     

Sorption of cesium and strontium ions on hydrous titanium dioxide from chloride medium

Epiboron instrumental neutron activation analysis (EINAA) using flexible boron as thermal neutron filter, has been used to analyze several salt samples obtained from various markets in Ghana for iodine. The method involves the irradiation of samples in boron carbide-lined polyethylene vials at the outer irradiation site of the Ghana Research Reactor-1 (GHARR-1). The samples were then counted directly without any pre-treatment on a Canberra N-type HPGe detector. The qualitative and quantitative analyses were done using the 443 keV photopeak of ¹²⁸I. The precision and accuracy of the method have been evaluated and the detection limits of the various samples were calculated. The values of iodine determined in the iodized salt range between 10.0 and 210 ppm. For non-iodinated salts, iodine levels were below 500 ppb. The values obtained show great variations among the salt samples, sample collection time and from market to market. This results show that the method can be successfully applied in the determination of trace amount of iodine in salt samples without any chemical separation.     

Sorption of caesium and strontium on clinoptilolite-and mordenite-containing sedimentary rocks

The sorption of caesium and strontium from its aqueous solutions by ten clinoptilolite-and mordenite-containing sedimentary materials from Slovakia, Bulgaria, Ukraine and Greece was investigated by batch-type procedure and radiotracer techniques. The concentration of the solutions, that were performed in and without the presence of competing cations (0.005 mol·dm⁻³ KCl) varied between 1·10⁻⁴ and 5·10⁻² mol·dm⁻³. The uptake and distribution coefficient (K _d ) values determined for the materials of the different origin, were correlated with their mineralogical composition and gross cation exchange capacity (CEC). The identification of the specific uptake sites was attempted on the basis of the sorption isotherms and the content of exchangeable cations. The experimental results provide information on the suitability of the individual materials for the treatment of radioactive wastes and their application as backfills in potential nuclear waste repositories.     

Sorption ability of chemically treated clinoptilolites with regard to cobalt and cesium

Clinoptilolites were treated by NaOH, NH₄NO₃, NaNO₃, KNO₃ and HCl solutions. The sorption ability has been measured by a radiochemical technique. The sorption coefficients were calculated for Co and Cs.     

Sorption of phenol and radioactive cesium onto surfactant modified insolubilized humic acid

In this study, the sorption behavior of two important contaminants, phenol and radioactive cesium (¹³⁷Cs), onto surfactant modified insolubilized humic acid (SMIA) were investigated as a function of time, sorbate concentration utilizing the radiotracer method and UV–Vis spectroscopy. Phenol sorption process was well described by both Freundlich and Tempkin type isotherms, and cesium sorption was described by Freundlich and Dubinin–Radushkevich isotherms. It was found that SMIA adsorbs both cations and phenolic substances. Kinetic studies indicated that adsorption behavior of phenol obey the pseudo second order rate law. FTIR spectroscopic technique was used to understand the structural changes during modification process with surfactants.     

Discrimination between adsorption isotherm models based on nonlinear frequency response results

A number of criteria are established for distinguishing between different adsorption isotherm types. These criteria are defined based on the adsorption isotherm derivatives up to the third order, which, on the other hand, can be estimated from nonlinear frequency response data. The criteria for five favourable (Langmuir, Freundlich, Sips, Toth and Unilan) isotherms and two complex isotherms (BET and quadratic) are presented. These criteria enable unique identification of the underlying adsorption isotherm relation if the values of the local first, second and third order isotherm derivatives at several points are known. The method is applied to experimental data from our previous publications, for one case of a favourable and one case of a complex isotherm.     

Sorption of heavy-metal ions and radioactive cesium by “Ultrasorb” composite sorbent

Data are given on the sorption of heavy-metal ions (Fe³⁺, Co²⁺, Cd²⁺, Pb²⁺, Zn²⁺, Cu²⁺ and Ni²⁺) and radioactive isotope¹³⁷Cs from Ringer salt solution by Ultrasorb composite sorbent, which has two components: the modified clay mineral palygorskite (palygorskite-M) and a modified fibrous carbon sorbent of AUT-M type (UVM-Ts). Selectivity series have been determined for the sorption of these toxic metals on the basis of the calculated distribution coefficients K_d under standard conditions. It is shown that the properties of the components combine well in the material, and it is proposed for use as a treatment agent (enterosorbent) having a selective action in the treatment of diseases due to the accumulation of heavy metals and radionuclides in the body. Institute for Sorption and Endoecological Problems, National Academy of Sciences of Ukraine, 13 ul. Generala Naumova, Kiev 03164, Ukraine. Translated from Teoreticheskaya i éksperimental'naya Khimiya, Vol. 36, No. 1, pp. 53–57, January–February, 2000.     

Sorption of cesium on copper hexacyanoferrate/polymer/silica composites in batch and dynamic conditions

The sorption of cesium ions from aqueous solutions on composite sorbents was investigated in static (by the batch method) and dynamic (on column) conditions. The composite sorbents consisted of copper hexacyanoferrate retained by an anion-exchange polymeric layer bound to porous silica beads. The influence of cesium concentration and solution flow rates on cesium sorption were studied. The cesium sorption isotherm obtained is of the Langmuir type. The shape of the breakthrough curves and the sorption capacity for cesium depend on the preparation procedure of the composites.     

Sorption and desorption experiments using stable cesium: considerations for radiocesium retention by fresh plant residues in Fukushima forest soils

Journal of Radioanalytical and Nuclear Chemistry - We conducted sorption experiments with stable cesium (133Cs) solution in different organic matter samples, aiming to understand the sorption of...     

Sorption and diffusion of HTO and cesium in crushed granite compacted to different lengths

In this study, batch and through-diffusion experiments have been performed in order to determine the distribution coefficients (K _d ), apparent diffusion coefficients (D _a ) and retardation factor (Rf), respectively. Both apparent and effective diffusion coefficient (D _a and D _e ) of Cs were obtained by accumulative concentration method developed by Crank (1975). In addition, a non-reactive radionuclide, HTO, was initially conducted in through-diffusion experiment for assessing the ability of radionuclide retardation. The distribution coefficients (K _d ) obtained by batch tests in 14 days under aerobic and anaerobic systems were 2.06 and 3.52 ml/g. Moreover, it is found in through-diffusion test that Rf = 4.12 and 4.40 and K _d = 0.97 and 1.06 of Cs did not have an obvious discrepancy in a length/diameter/ (L/D) ratio of 0.44 and 1.78. However, Rf and K _d revealed a larger difference in an L/D ratio closing to 1 due to the geometric change of one-dimension diffusive hypothesis. Therefore, it demonstrates that Rf and K _d obtained by through-diffusion experiments only could be achieved at a lower or larger L/D ratio and would be reliable for long-term performance assessment.     

Water isotherm models for 4A (NaA) zeolite

The adsorption data of Gorbach et al. (Adsorption 10(1): 29–46, 2004) and Morris (J. Colloid Interface Sci. 28: 149–155, 1968) for the adsorption of water on 4A zeolite pellets is re-analyzed. Model isotherms are derived considering a two site hypothesis, one for the α cage and one for the β cage. Four simple model isotherms are fitted to the data. Both a dual site Toth or dual site Langmuir isotherm model fit the data adequately. The optimized standard enthalpy and entropy of adsorption parameters derived from the data are surprising for the β cage. The optimized standard enthalpy of the β cage is 1/3rd of that observed calorimetrically, and the standard entropy of adsorption is positive, a physical impossibility. Substituting the calorimetric enthalpy of adsorption corrected the standard differential entropy of sorption values resulting in the standard entropy of sorption values varying significantly with temperature. This variation is postulated to be due to either water of hydration formation, or clathrate formation, or the formation of clusters of water such as dimers, trimers, etc.