Ultrasound‐assisted extraction and preliminary purification of proanthocyanidins and chlorogenic acid from almond (Prunus dulcis) skin

An aqueous solution of polyethylene glycol (PEG) as a green solvent was employed for the first time to develop the ultrasound‐assisted extraction of proanthocyanidins (PA) and chlorogenic acid (CA) from almond skin. The optimized extraction parameters were determined based on response surface methodology, and corresponded to an ultrasound power of 120 W, a liquid‐to‐solid ratio of 20:1 (mL/g), and a PEG concentration of 50% (v/v). Under these optimized conditions, the extraction yields of PAs and CA from almond skin were 32.68 ± 0.22 and 16.01 ± 0.19 mg/g, respectively. Compared with organic solvent extraction, PEG solution extraction produced higher yields. Different macroporous resins were compared for their performance in purifying PAs and CA from almond skin extract. Static adsorption/desorption experimental results demonstrated that AB‐8 resin exhibits excellent purification performance at pH 4. Under the optimized dynamic adsorption/desorption conditions on the AB‐8 column, the total recovery of purification for PAs and CA was 80.67%. The total content of PAs and CA in the preliminarily purified extract was 89.17% (with respective contents of 60.90 and 28.27%).     

Discrimination of almonds (Prunus dulcis) geographical origin by minerals and fatty acids profiling

Twenty-one almond samples from three different geographical origins (Sicily, Spain and California) were investigated by determining minerals and fatty acids compositions. Data were used to discriminate by chemometry almond origin by linear discriminant analysis. With respect to previous PCA profiling studies, this work provides a simpler analytical protocol for the identification of almonds geographical origin. Classification by using mineral contents data only was correct in 77% of the samples, while, by using fatty acid profiles, the percentages of samples correctly classified reached 82%. The coupling of mineral contents and fatty acid profiles lead to an increased efficiency of the classification with 87% of samples correctly classified.     

Amoxicillin removal from aqueous matrices by sorption with almond shell ashes

The adsorption of the antibiotic amoxicillin at low concentration levels (µg?L^?1 order) from aqueous solution on almond shell ashes has been investigated, either by kinetic or equilibrium assays. The effect of the adsorbent amount, initial concentration of the antibiotic, particle diameter (d_p) and temperature were considered to evaluate the adsorption capacity of the adsorbent. The results showed that amoxicillin sorption is dependent on these four factors. The adsorption process was relatively fast and equilibrium was established in about 12 hours. The optimum parameters for an initial concentration of 450?µg?L^?1 were 50?mg of adsorbent, 303?K and d_p?<?600?µm. A comparison of kinetic models showed that pseudo-second order kinetics provides the best correlation of the experimental data. Isotherm data adjusted better to Langmuir equation, with an adsorption capacity of 2.5?±?0.1?mg?g^?1 at 303?K. The desorption process was also evaluated (maximum efficiency of 5%). Thermodynamic parameters were calculated and the negative value of ΔH⁰ and ΔG⁰ showed that adsorption was exothermic and a spontaneous process.     

An unusual diterpene glycoside from the nuts of almond (Prunus amygdalus Batsch)

A new unusual kauranoid diterpene glycoside, named amygdaloside, was isolated from the nuts of almond (Prunus amygdalus). It's structure was established as 17-O-β-D-glucopyranoside ent-6,7-epoxy-6-hydroxyl-6,7-secokaur-19-oic acid, 6,19-lactone 16β17-diol on the basis of high-resolution 1D and 2D NMR spectral studies.     

Removal of lead(II) and zinc(II) ions from aqueous solutions by adsorption onto activated carbon synthesized from watermelon shell and walnut shell

Activated carbons from watermelon shell (GACW) and walnut shell (GACN) were synthesized through chemical activation with phosphoric acid 40 % w/w, as an alternative low-cost adsorbent for the removal of lead(II) and zinc(II) ions from aqueous solutions. The yield of production was 85 and 80 % for GACW and GACN respectively. To compare the differences and similarities between the two activated carbons the following tests were performed: surface and pore width with SEM, nitrogen adsorption isotherms at ?196 °C (77 K), IR spectroscopy, TGA, point of zero charge (PZC) and Boehm titration. The GACN has 10 % more surface area (789 m² g^?1 for GACN and 710 m² g^?1 for GACW) and 13 % more pore volume than GACW. Also, GACN has a better resistance to high temperatures than GACW (the loss of mass at 900 °C was 20 % for GACN, while for GACW was 31 %). The effect of the initial concentration of lead(II) and zinc(II) ions on the adsorption process was studied in a batch process mode. To quantify the adsorption of lead and zinc adsorption isotherms of both metals in aqueous solution were performed for each carbon using analytic technique of atomic absorption. The adsorption isotherm data were better fitted by Langmuir model. Experimental results suggests that one gram of GACW adsorbs more milligrams of lead(II) and zinc(II) than one gram of GACN; it is suggest that the pore distribution is a significant variable in the adsorption process because GACW present mesopores and micropores, while GACN has only micropores. Also, the surface chemistry is an important variable in the adsorption process because GACW presents a lower pH_PZC than GACN (3.05 for GACW and 4.5 for GACN) and the solution’s pH of each metal was adjusted in 4.5, for that it could be suggested that the electrostatic interactions were increased between the ion and the carbon surface.     

Assessment of Bleached and Unbleached Nanofibers from Pistachio Shells for Nanopaper Making

Cellulose and lignocellulose nanofibrils were extracted from pistachio shells utilizing environmentally friendly pulping and totally chlorine-free bleaching. The extracted nanofibers were used to elaborate nanopaper, a continuous film made by gravimetric entanglement of the nanofibers and hot-pressed to enhance intramolecular bonding. The elaborated nanopapers were analyzed through their mechanical, optical, and surface properties to evaluate the influence of non-cellulosic macromolecules on the final properties of the nanopaper. Results have shown that the presence of lignin augmented the viscoelastic properties of the nanopapers by ≈25% compared with fully bleached nanopaper; moreover, the hydrophobicity of the lignocellulose nanopaper was achieved, as the surface free energy was diminished from 62.65 to 32.45 mNm⁻¹ with an almost non-polar component and a water contact angle of 93.52°. On the other hand, the presence of lignin had an apparent visual effect on the color of the nanopapers, with a ΔE of 51.33 and a ΔL of −44.91, meaning a substantial darkening of the film. However, in terms of ultraviolet transmittance, the presence of lignin resulted in a practically nonexistent transmission in the UV spectra, with low transmittance in the visible wavelengths. In general, the presence of lignin resulted in the enhancement of selected properties which are desirable for packaging materials, which makes pistachio shell nano-lignocellulose an attractive option for this field.     

Xanthones from the green branch of Garcinia dulcis

Two new prenylated xanthones, namely dulcisxanthone H and dulcisxanthone I along with garciniaxanthone C, were isolated from the dichloromethane extract of the green branch of Garcinia dulcis. Their structures were elucidated by the analysis of 1-D and 2-D NMR spectral data. Their antibacterial activities were also examined.     

Amphiphilic antioxidants from "cashew nut shell liquid" (CNSL) waste

Hydrogenated cardanol and cardols, contained in industrial grade cardanol oil and obtained by distillation of the raw "cashew nut shell liquid" (CNSL), are easily transformed into efficient 4-thiaflavane antioxidants bearing a long alkyl chain on A ring and a catechol group on B ring.     

从电纺丝到电喷离子化制备核壳纳米粒子

20世纪80年代,随着纳米科学研究的迅速发展,制备纳米纤维的电纺丝技术引起人们的浓厚兴趣,在电纺丝过程中,人们向聚合物溶液或熔体施加几千至上万伏的高压静电,使电荷在聚合物溶液内大量聚集,当电荷聚集到一定程度,电荷之间的排斥力克服了溶液表面张力后,     

Ag(core)-AgCl(shell) standard microelectrode-loaded TiO2

Micrometer-sized Ag(core)-AgCl(shell) composite crystals have been formed on TiO2 thin films by a two-st epelectrochemical method to provide information on the thermodynamic condition for efficient photoinduced interfacial electron transfer.     

Removal of uranium(VI) from aqueous solution by apricot shell activated carbon

Uranium is a toxic and radioactive heavy metal found in nuclear effluents and should be treated based on environmental considerations. The adsorption of uranyl cations (UO₂ ²⁺) by apricot shell activated carbon (ASAC) was investigated in a batch system. The effects of pH, contact time, temperature, adsorbent dosage on the adsorption kinetics and equilibrium adsorption isotherms of U(VI) were examined. The U(VI) uptake was fast within the first 60 min and reached an equilibrium state at 120 min. The adsorption process was highly pH dependent and the maximum adsorption was obtained at an initial solution pH of 6.0. Temperature over the range 25–45 °C had little effect on the U(VI) adsorption. The U(VI) removal efficiency increased concurrently with increasing ASAC dosage, whereas the U(VI) adsorption capacity decreased with increasing ASAC dosage. The adsorption process followed both Langmuir and Freundlich isotherms. On the basis of Langmuir model, the maximum adsorption capacity was found to be 59.17 mg U(VI)/g adsorbent. The adsorption kinetics can be very well defined by the pseudo-first-order rate model. The present results suggest that ASAC could be used as an adsorbent for an efficient removal of U(VI) from aqueous solution.     

New Bisabolane-Type Sesquiterpenes from the Aerial Parts of Lippia dulcis

Two new bisabolane-type sesquiterpenes, lippidulcine A (3) and epilippidulcine A (4), have been isolated from the aerial parts of Lippia dulcis TREV. along with five known flavonoids, cirsimaritin (5), salvigenin (6), eupatorin (7), 5-hydroxy-6,7,3',4'-tetramethoxyflavone (8) and 5,3'-dihydroxy-6,7,4',5'-tetramethoxyflavone (9), three known phenylethanoid glycosides, decaffeoylverbascoside (10), acteoside (11) and isoacteoside (12), and two known iridoid glucosides, 8-epiloganin (13) and lamiide (14). Their chemical structures have been determined on the basis of spectroscopic data. Among them, 5, 7, and 9 exhibited almost the same activity as that of alpha-tocopherol, and 10-12 were identified as stronger antioxidants than alpha-tocopherol using the ferric thiocyanate method.     

A new prenylated biflavonoid from the leaves of Garcinia dulcis

A new prenylated biflavonoid, named dulcisbiflavonoid A, together with five biflavonoids were isolated from the leaves of Garcinia dulcis. Their structures were elucidated by analysing their spectroscopic data, especially 1D and 2D NMR.     

Preparation and reactions of optically active cyanohydrins using the (R)-hydroxynitrile lyase from Prunus amygdalus

Cyanuration of 2-naphthaldehyde (1) and 5-methyl-2-furaldehyde (2) yielded the racemic 2-hydroxy-2-(β-naphthyl)ethanenitrile (R,S)-3 and 2-hydroxy-2-(5-methyl-2-furyl)ethanenitrile (R,S)-5, respectively. The same reaction can be completed by using acetone cyanohydrin (4) as a transcyanating agent. The optically active (R)-3 and (S)-5 could be respectively obtained by hydrocyanation of 1 and 2 using (R)-hydroxynitrile lyase (R)-PaHNL [EC 4.1.2.10] from almonds (Prunus amygdalus) as a chiral catalyst. Cyanohydrins 3 and 5 in their racemic and optically active forms undergo a number of transformations which involve either the hydroxyl group or the cyanide function. Moreover, derivatization of 3 and 5 with (S)-Naproxen®chloride (S)-14 gave the respective diastereoisomers. The optical activity of (R)-3 and (S)-5 as well as their derivatives were recorded. The postulated structures for the new products were supported with compatible elementary and spectroscopic (IR, ¹H NMR, ¹³C NMR, MS, and single crystal X-Ray crystallography) analyses. The antimicrobial activity of some selected racemic new products and their respective optically active analogues were also undertaken.     

Prunus armeniaca hydroxynitrile lyase (ParsHNL)-catalyzed asymmetric synthesis of cyanohydrins from sterically demanding aromatic aldehydes

Herein we report the biocatalytic asymmetric synthesis of cyanohydrins by using a new (R)-HNL from Prunus armeniaca. Several sterically demanding aromatic aldehydes which have never been used as substrates for any known HNLs are employed for the new (R)-HNL from P. armeniaca. The cyanohydrins synthesized are obtained in good chemical yield with excellent enantioselectivities.     

Formation of reversible shell cross-linked micelles from the biodegradable amphiphilic diblock copolymer poly(L-cysteine)-block-poly(L-lactide)

A novel biodegradable diblock copolymer, poly(L-cysteine)-b-poly(L-lactide) (PLC-b-PLLA), was synthesized by ring-opening polymerization (ROP) of N-carboxyanhydride of beta-benzyloxycarbonyl-L-cysteine (ZLC-NCA) with amino-terminated poly(L-lactide) (NH 2-PLLA) as a macroinitiator in a convenient way. The diblock copolymer and its precursor were characterized by (1)H NMR, Fourier transform infrared (FT-IR), gel permeation chromatography (GPC), and X-ray photoelectron spectroscopy (XPS) measurements. The length of each block polymer could be tailored by molecular design and the ratios of feeding monomers. The cell adhesion and cell spread on the PZLC-b-PLLA and PLC-b-PLLA films were enhanced compared to those on pure PLA film. PLC-b-PLLA can self-assemble to form micelles in aqueous media. A pyrene probe is used to demonstrate the micelle formation of PLC-b-PLLA in aqueous solution. Due to the ease of disulfide exchange with thiols, the obtained micelles are reversible shell cross-linked (SCL) micelles. The morphology and size of the micelles are studied by dynamic light scattering (DLS) and environmental scanning electron microscopy (ESEM).     

Type-II quantum dots: CdTe/CdSe(core/shell) and CdSe/ZnTe(core/shell) heterostructures

Type-II band engineered quantum dots (CdTe/CdSe(core/shell) and CdSe/ZnTe(core/shell) heterostructures) are described. The optical properties of these type-II quantum dots are studied in parallel with their type-I counterparts. We demonstrate that the spatial distribution of carriers can be controlled within the type-II quantum dots, which makes their properties strongly governed by the band offset of the comprising materials. This allows access to optical transition energies that are not restricted to band gap energies. The type-II quantum dots reported here can emit at lower energies than the band gaps of comprising materials. The type-II emission can be tailored by the shell thickness as well as the core size. The enhanced control over carrier distribution afforded by these type-II materials may prove useful for many applications, such as photovoltaics and photoconduction devices.     

电化学沉积法制备金（核）-铜（壳）纳米粒子阵列

以组装在有机分子自组装膜/金基底电极上的Au纳米粒子阵列为电化学沉积模板,制备了金(核)-铜 (壳)纳米粒子阵列.选用巯基十一胺（AUDT）和巯基癸烷（DT）混合自组装膜作为基底电极与Au纳米粒子的耦联层,可以在一定的电位下实现金属Cu在Au纳米粒子上的选择性沉积.将沉积电位控制在－0.03 V（vs SCE）时,沉积初期（t ≤ 15 s,沉积粒子粒径 ≤ 20 nm ）金(核)-铜 (壳)粒子具有良好的单分散性和近似球形,而且粒径实验值同计算值非常吻合.