Pesticide analysis by micellar electrokinetic capillary chromatography

On-capillary sample concentration using sample stacking for the improvement of detection limits for various pesticides separated by micellar electrokinetic capillary chromatography was examined. The dependence of the stacking on different parameters was investigated. An approximately 30-fold preconcentration was achieved by applying sample stacking. Employing a two-step enrichment process (solid-phase extraction combined with sample stacking), detection limits were improved and the sample volume for SPE was reduced. In addition, the total time for the analysis was considerably reduced. Detection limits were between 0.01 and 0.1 ng/ml under these enrichment conditions.     

Molecular recognition by chiral cationic micellar and micelle-like aggregates in electrokinetic capillary chromatography

We examined the enantiomer separation with micelles and a micelle-like polymer made with trimethylammonium-terminated surfactants all of whose hydrocarbon chains contain hydrogen bonding valinediamide moieties in electrokinetic chromatography (EKC). The surfactants used were 3-(N-dodecanoyl-L-valylamino)-propyltrimethylammonium bromide (surfactant 1) and 6-(N-nonanoyl-L-valylamino)hexyl-trimethylammonium bromide (surfactant 2); the micelle-like polymer was derived from 3-(N-10-undecenoyl-L-valyl)aminopropyltrimethylammonium bromide (surfactant 3). N-Acylamino acids and their isopropyl esters were separated with enantiomers with the same configuration as the chiral surfactant and which were retained to a greater extent than the counterparts in micelles. The micellar hydrophobic environment, in which amides function as hydrogen bonding sites with solutes, and ceased micellar kinetic association-dissociation with polymerization are discussed.     

Optimization strategies in micellar electrokinetic capillary chromatography

Summary Computer-assisted procedures for the one-parameter optimization of the surfactant concentration and the concentration of urea or D-glucose as modifiers in micellar electrokinetic capillary chromatography have been developed. These procedures permit a rapid optimization of one parameter on the basis of only two experiments. Predicted values are compared to empirically obtained optimum values. The influence of the modifier concentration on the critical micelle concentration of sodium dodecyl sulfate was experimentally determined in buffers commonly employed in micellar electrokinetic chromatography. The alteration of retention factors of solutes caused by the influence of urea addition on the critical micelle concentration of sodium dodecyl sulfate was calculated under the assumption of constant distribution coefficients and compared to experimentally obtained values. It was demonstrated that the addition of urea or of D-glucose does not alter the phase ratio substantially.     

Pharmaceutical analysis using micellar electrokinetic capillary chromatography

The potential utility in pharmaceutical analysis of a capillary electrokinetic separation technique that employs a micellar "pseudo-stationary phase" is discussed and illustrated. Chromatograms of separations of vitamin metabolites and derivatized amino acids are presented to illustrate the high efficiency of the technique and the ability to simultaneously separate the charged and neutral components of pharmaceutical samples. The analytical characteristics of the technique and the importance of optimizing experimental parameters, such as surfactant concentration and capillary column diameter, are discussed and demonstrated with the aid of chromatograms.     

Separation of coumarins by micellar electrokinetic capillary chromatography

Nine coumarins were successfully separated simultaneously using micellar electrokinetic capillary chromatography with 4-hydroxybenzoic acid as an internal standard. A carrier composed of buffer solution (20 mM sodium dodecyl sulfate-15 mM sodium borate-15 mM sodium dihydrogenphosphate)-acetonitrile (24:1) was found to be the most suitable electrolyte for this separation. The analysis time (22 min) was shorter than that using high-performance liquid chromatography (47 min). Contents of coumarins in the crude drug of Angelicae Tuhou Radix could be easily determined by the proposed method.     

Serum iohexol analysis by micellar electrokinetic capillary chromatography

A simple and rapid ( approximately 4 min) method for the measurement of iohexol in serum for assessing the glomerular filtration rate is described. It is based on direct serum injection on the capillary by MEKC. The method is linear between 8 and 260 mg/L, with an RSD of peak height of 2.9%. Several simple steps have contributed to an improved daily precision, such as choosing a high pH buffer, increasing the SDS concentration, frequent standardization, and eliminating any sample pretreatment.     

Separation of some chiral flavanones by micellar electrokinetic chromatography

Micellar electrokinetic chromatography (MEKC) was applied for enantioseparation of selected flavanones, including naringin, hesperidin, neohesperidin, naringenin, hesperetin, pinostrobin, isosakuranetin, eriodictyol, and homoeriodictyol. gamma-Cyclodextrin (gamma-CD) and sodium cholate (SCh) were used as chiral modifiers inducing enantioselectivity to the background electrolyte. From among many investigated selectors only these two appeared to possess the best enantioselective properties in respect to studied flavanones. The mechanisms of their action are a little different; SCh used above critical micelle point concentration forms chiral micelles itself while gamma-CD is deprived of this property and requires addition of surfactants as, e.g., sodium dodecyl sulfate. It was found that SCh enables separation of flavanone glycosides diastereomers while separation of enantiomers of flavanone aglycones may be achieved with gamma-CD. Consideration of structural relation led to the suggestion that interaction of sugar moiety of glycosides with SCh micelles give rise to chiral recognition. MEKC appeared to be a suitable and efficient analytical tool to follow enantiomeric composition of flavanones.     

Determination of heterocyclic compounds by micellar electrokinetic capillary chromatography

Micellar electrokinetic capillary chromatography (MECC) based on sodium cholate (NaCh) and sodium dodecyl sulphate (SDS) was developed for the determination of aromatic amino acids and heterocyclic legume constituents. The influence of temperature, voltage, micellar system, pH, zwitterion and modifier concentrations in the buffer on migration times, peak areas, resolution and number of theoretical plates was investigated. This MECC method makes possible the sensitive determination of the individual compounds with detection limits in the picomole range. Up to 300 000 theoretical plates per metre of capillary were obtained together with satisfactory linearity and repeatability of the NaCh method. The applicability of MECC to samples prepared from plant material, following a fast and simple technique of isolation, purification and group separation, is illustrated by selected examples.     

Determination of plasma heparin by micellar electrokinetic capillary chromatography

The micellar electrokinetic capillary chromatography (MECC) method is reported for the separation of heparin, and for the possibility of direct determination of free heparin in plasma. The conditions for MECC were: pH 8.5, 25 mM sodium dodecyl sulfate (SDS), 25 mM borate buffer, with a 30 cmx50 mum ID fused-silica capillary. The sample was detected with a UV-detector at 270 nm with heparin as external standard. The recovery rate was 95.6-98.7%. This method was linear in the range 80-7000 U l(-1). The within-run and between-run relative standard deviations were lower than 3.1 and 4.5%, respectively. It is suggested that this MECC method may be used to determine blood samples containing high levels of heparin.     

The separation of herbicides by micellar electrokinetic capillary chromatography

Summary A method for the separation of a number of herbicides consisting of chlorophenoxy acids by micellar electrokinetic capillary chromatography (MECC) was developed. Sodium dodecyl sulphate (SDS), Brij 35, cetyltrimethylammonium bromide (CTAB) and methanol were introduced into the buffers to investigate their effects on the separation of the herbicides. SDS combined with Brij 35 as the micellar agent was found to provide the best overall separation of these components.     

Separation of anabolic steroids by micellar electrokinetic capillary chromatography

Summary The separation of seven analogous anabolic steroids was studied by micellar electrokinetic capillary chromatography (MECC). The retention order was found to be dependent on polarity. All of these steroids were well separated by the addition of organic modifiers to the separation buffer. Of the organic modifiers tested, 1-propanol gave the best separation, better than methanol or acetonitrile.     

Analysis of water-soluble vitamins by micellar electrokinetic capillary chromatography

Seven water-soluble vitamins were determined simultaneously by micellar electrokinetic capillary chromatography with UV detection. All these compounds were separated from each other within ca. 22 min by using a carrier containing sodium dodecyl sulphate as the surfactant. On-column detection at 254 nm with ethyl p-aminobenzoate as the internal standard allowed sensitive, accurate and reproducible determination of these compounds. Five principal constituents of a vitamin injection were determined with relative standard deviations of less than 2.1%.     

Use of a fluorosurfactant in micellar electrokinetic capillary chromatography

Beads prepared from a thermosensitive polymer, hydroxypropylcellulose, exhibit temperature-dependent porosity. At temperatures below 40°C the beads are swollen having large pores, while at temperatures above 45°C the beads are in a shrunken state having smaller pores. In the presence of 1 M NaCl the transition temperature decreased to about 30°C. In a swollen state the size of pore is large enough to accommodate lysozyme (mol. mass 14 400) and -chymotrypsin (mol. mass 21 600) but not bovine serum albumin (mol. mass 67 000). When the beads are shrunken, all the proteins are eluted from the column packed with hydroxypropylcellulose beads in the volume close to the void volume of the column.     

Migration time and resolution in micellar electrokinetic capillary chromatography

Summary This paper analyses the various modes of implementing micellar electrokinetic capillary chromatography (MECC) experimentally, according to the respective directions of the electro-osmotic flow and micelle and solute migrations. The importance of each mode is discussed with respect to separation time, separation time range, solute separability and elution order. The k and R_s expressions suitable for each mode are derived.     

Mixed micellar electrokinetic capillary chromatography separation of depolymerized grape procyanidins

Oligomeric procyanidins are potent antioxidant polyphenols of potential interest as disease-preventing agents. Their efficiency depends on the size and composition of their oligomeric structures. The mean degree of polymerization of these compounds is usually estimated by thiolysis with thiol-alpha-toluene followed by analysis using high-performance liquid chromatography (HPLC). We show the development of a mixed micellar electrokinetic chromatography (MEKC) method for the separation of the major components obtained after thiolysis with cysteamine (catechins and their cysteamine conjugates). MEKC studies using sodium dodecyl sulfate (SDS as pseudostationary phase led to long migration times, e.g., with 100 mM SDS, at pH 7, the solutes were separated in about 40 min), while the use of sodium cholate (SC) produced an elution window relatively short. Using a mixed micellar SC-SDS system (50 mM phosphate at pH 7 containing 40 mM SC and 10 mM SDS), it is possible to separate these compounds in less than 15 min. The proposed method is useful to separate the major components of the thiolysate in effluents from food processing (e.g., skins and seeds from grape and apple) considered as potential procyanidin sources.     

Analysis of nucleic acid derivatives by micellar electrokinetic capillary chromatography

The use of micellar electrokinetic capillary chromatography (MECC) for the analysis of the major nucleobases, nucleosides, and nucleotides, and their chemically modified derivatives, has been developed and refined. The dimensions of the separating capillaries, the composition of the buffering systems, and the conditions used for electrophoresis were investigated in order to obtain the best performance. Particular emphasis was placed on the identification of the physiological constituents of nucleic acids and their chemically modified analogs: in vitro studies on calf thymus DNA exposed to genotoxic agents have demonstrated that adducted bases and nucleolides can be identified by MECC.     

Software and internet resources for capillary electrophoresis and micellar electrokinetic capillary chromatography

The purpose of the contribution is to show how software and the internet have changed the way in which we carry out research, and what additional possibilities these new resources and tools provide. The internet and e-mail broaden our horizon for cooperation. There are no borders for information exchange: our library is a virtual one, electronic databases are at our fingertips. E-mail discussion groups provide an electronic community of CE users. Such forums have provided a basis for worldwide scientific cooperation amongst scientists; the present contribution is only one of several examples. Estimation software provides us with estimates of component properties in those cases where this information is not available from literature or from experiments (an estimated value is better than no value). Several examples will illustrate the use of estimation software in capillary zone electrophoresis and micellar electrokinetic capillary chromatography. Simulation software presents visualization of experimental results to be expected, both as a training tool and as the first step in method development. Other simulations yield valuable insights into phenomena that are not readily accessible experimentally for reasons of size or time-scale.