Finite Element Analysis of Field Pattern in Multiple Groove Guide

Rectangular groove guide with multiple grooves has been analyzed by finite element method (FEM) in this paper. The electrical field patterns of the dominant mode and the first higher-order TE mode have been presented for groove guide with single-, double-, triple-, and quadruple-rectangular grooves. The electromagnetic field of the dominant mode is distributed with a concentration in the groove regions, while the electromagnetic field of the first higher-order TE mode is mainly distributed in regions between grooves. The low loss characteristic has been found not only in single-groove guide, but also in multiple groove guide.     

Field Patterns in Double Circular-Groove Guide by Finite Element Method

The electromagnetic power coupling in symmetrical and asymmetrical double circular-groove guides have been analyzed by finite element method (FEM) in this paper. The electrical field patterns of the dominant mode and the first higher-order TE mode have been presented. The electromagnetic field of the dominant mode distributes with a concentration in the two grooves and the region between grooves as well for symmetrical double circular-groove guide, while it distributes with a concentration in the groove with larger radius for the asymmetrical double circular-groove guide. The electrical field patterns of the first higher-order TE mode in symmetrical and asymmetrical double circular-groove guide are also presented. The figures in this paper have important values in design of circular-groove guide power coupler for millimeter wave applications.     

Finite Element Analysis of the Field Patterns of Higher-Order TE and TM Modes in Rectangular-Groove Guide

The field patterns of the different TE and TM modes in a rectangular-groove guide are analysed by finite element method. The electric field, magnetic field and energy distributions in the groove guide for the dominant TE mode, the lowest TM mode and the 1st, 2nd, and 3rd higher-order TE,TM modes are presented. The results show that the low-loss characteristic of rectangular-groove guide seems unreliable. The results in this paper will be of benefit for us to understand the transmission characteristics of rectangular-groove guide, and will be of practical significance in designing groove guide components.     

Finite Element Analysis of the Dominant Mode Variation in Groove Guide

In this paper, the dominant mode in groove guide is analyzed by finite element method. For the guide with a shallow groove, the electric field lines (abbreviated as E lines) are perpendicular to the parallel plate, which is different from the literatures, and the dominant mode distribution is irrelevant to the groove width; for the guide with a narrow but deeper groove, the E lines are parallel to the plate region, which represents the characteristics of lower attenuation, for the guide with a deeper and wider groove, a complicated E lines are obtained. These results reveal that the dominant mode distribution in groove guide is varied, which replenish our understanding of groove guide, and the results have important values in design, manufacture, and application of groove guide.     

The characteristic equations of higher-order modes in circular groove guide

The characteristic equations of higher-order modes, including TE mode and TM mode, are derived in this paper. These equations are very useful for us to understand the mode distribution in circular groove guide.The Project Supported by National Natural Science Foundation of P.R.China     

Finite Element Analysis of the TE Modes in Truncated-Circular Waveguide

Truncated-circular waveguide are used in some microwave and millimeter-wave components. The field patterns in truncated-circular waveguide are desired but usually difficult to be computed by conventional methods. In this paper, they are efficiently determined by using finite element method. The electrical field lines of the dominant TE mode and the first sixteen higher-order TE modes are presented. The calculated results in this paper have important values for us to understand the transmission characteristics of truncated-circular waveguide, and will be of practical significance in designing waveguide components in microwave and millimeter wave engineering.     

The dominant mode in closed circular groove guide

The structure of closed circular groove guide is similar to that of open circular groove guide, but it can prevent energy from leaking out of the guide. In this paper, the dominant mode in closed circular groove guide is considered. The characteristic equation is derived and solved and the results are discussed.The Project Supported by National Natural Science Foundation of P. R. China and National Key Laboratory of Millimeter Waves Foundation of P. R. China     

SiO2波导布拉格器件中声表面波及声光相互作用分析

针对SiO2光波导声光布拉格器件,计算了SiO2非对称平板波导TE模式的横向场分布;给出了SiO2/ZnO/Air层状介质结构的性能方程、运动方程和麦克斯韦方程,推导出这种层状结构的特征方程,并结合所满足的边界条件,得到了各层介质的位移及电磁场分布;计算了声表面波所引起的光学相对介质隔离率张量的变化,最后讨论了声光衍射效率和光场与声场的重叠积分、声功率、声频率、声孔径和光波导参数之间的关系。结果表明,在低频范围内光场与声表面波场重叠良好;低阶模的重叠积分始终大于高阶模重叠积分,最低阶模与声表面波相互作用最强,所需声功率最小;当声功率一定时,增加声孔径可以提高衍射效率。     

Field Patterns of the TE Modes in Ridge-Trough Waveguide

A single-ridge waveguide with a symmetrical longitudinal trough, designated as a ridge-trough waveguide has been used as a transition in a V-band (50-75 GHz) wafer probe recently. In this paper, the field patterns for the dominant TE mode and the first higher TE mode in ridge-trough waveguide with different configurations are presented by finite element method. The field patterns in this paper have important values for us to understand the transmission characteristics of ridge-trough waveguide, and will be of practical significance in designing ridge-trough waveguide components in microwave and millimeter wave engineering.     

Transmission characteristics of several kinds of closed groove waveguides for millimeter waves

An advantage of closed groove guide over open groove guide is attended. In this paper, the several kinds of closed groove guides including the trapezoidal-, elliptic- and parabolic-groove guides as new types of millimeter wave transmission lines are presented. Their dispersion and cut-off characteristics of the dominant mode are analysed and compared with ones of the closed V-and circular- groove guides by using the equivalent network method. The obtained results have important meaning in theoretical studies and actual applications of groove waveguides.     

任意分配比的微波功率分配器

圆波导中TE11模式波的电场在波导壁上随角度按正弦(或余弦)变化.如果在其侧壁上沿径向接两根互相垂直的波导,波导绕轴转动时两根波导中所分配的功率将随旋转角度而变化.这样就可以设计出任意分配比的微波功率分配器.通过HFSS的模拟计算完成了该功分器的设计,同时设计了一个新型的圆波导TE11模式转换器.     

Higher-order modes of photonic-crystal fibers

The propagation constants and the field distribution of the higher-order modes in photonic-crystal fibers have been studied. It is shown that the standard single-mode operation condition of a fiber, in which the first higher-order mode is cut-off, is not applicable to photonic-crystal fibers because the latter can guide higher-order eigenmodes, even when this condition is fulfilled.     

对称单负介质包层平面波导的模式特征

系统研究了负μ材料(MNG)作为包层的对称三层平板波导的传输特性. 研究发现,这种波导既支持快波的传播,又支持TE₀,TE₁模式的慢波传输. 其模式特性不同于左手介质波导和传统介质波导,导模存在的模折射率范围要比它们的大. MNG波导的TE₀快波模缺失,且TE_m模(m>1)的传播常数大于TM_m模的传播常数. TE_m模具有双模特征,且与波导的结构参数密切相关,导致波导中的净能流出现负值. 关键词： 单负介质 平板波导 快波与慢波 传播常数     

Finite Element Analysis of the Field Patterns in Elliptical Waveguide

In this paper, finite element method is first used to discuss the field patterns in a hollow perfectly conducting pipe with elliptical cross section. The electrical field lines of the dominant TE mode as well as the magnetic field lines of the lowest TM mode are presented. The results are the same with literatures, and also give a correction to the field pattern of the lowest TM mode in elliptical waveguide.     

HEM₁₁ mode magnetically insulated transmission line oscillator:Simulation and experiment

A novel magnetically insulated transmission line oscillator(MILO) in which a modified HEM 11 mode is taken as its main interaction mode(HEM 11 mode MILO) is simulated and experimented in this paper.The excitation of the oscillation mode is made possible by carefully adjusting the arrangement of each resonant cavity in a two-dimensional slow wave structure.The special feature of such a device is that in the slow-wave-structure region,the interaction mode is HEM 11 mode which is a TM-like one that could interact with electron beams effectively;and in the coaxial output region,the microwave mode is TE 11 mode which has a favourable field density pattern to be directly radiated.Employing an electron beam of about 441 kV and 39.7 kA,the HEM 11 mode MILO generates a high power microwave output of about 1.47 GW at 1.45 GHz in particle-in-cell simulation.The power conversion efficiency is about 8.4 % and the generated microwave is in a TE 11-like circular polarization mode.In a preliminary experiment investigation,high power microwave is detected from the device with a frequency of 1.46 GHz,an output energy of 43 J-47 J,and a pulse duration of 44 ns-49 ns when the input voltage is 430 kV-450 kV,and the diode current is 37 kA-39 kA.     

The Analysis of Post-Mount in W-Band Circular Groove Guide

Finite-difference time-domain (FDTD) method is used to calculate the driving-point impedance of the circular groove guide diode mount. A simple way is proposed to approximate the curvilinear metal boundary of circular groove guide. Discrete equations are obtained from the Ampere's law and Faraday's law. Perfectly matched layer (PML) is applied on the open boundary of circular groove guide. At last program is made to obtain the field components. The driving-point impedance can be achieved from the ratio of the Fourier transform of the voltage and the Fourier transform of the current. The cutoff frequency and field pattern of the dominant mode are also obtained with well agreement with the theoretical results, this verifies the validity of the FDTD program.     

磁光平面波导的单向传播特性

表面磁等离子体(surfacemagnetoplasmons,SMPs)是一种在电介质和偏置磁场作用下磁光材料界面处传播的近场电磁波.其独特的非互易传播特性引起了大量科研工作的关注,但在具体的波导结构设计上仍存在很多问题.本文研究了一种银-硅-磁光材料的3层平面波导结构,SMPs在磁光材料和硅的界面处传播,发现在特定的频率范围内,SMPs的基模及高阶模式均具有正向或反向的单向传播特性.分别计算了旋磁与旋电材料平面波导的色散方程,研究了硅层厚度与外加磁场对能带结构及SMPs单向传播区域的影响,发现无论是旋磁或旋电材料的结构,硅层厚度的增加使高阶模式使高阶模式出现在更低的频率位置,使单向传输带宽变小甚至消失,外加磁场的变大使磁光材料的能带结构频率增大的同时带隙中也引入了高阶模式.计算了2种磁光材料平面波导的正向和反向的单向传播带宽宽度,发现旋磁材料YIG的单向SMPs模式出现在GHz波段,最大单向带宽可达到2.45 GHz;旋电材料InSb的单向SMPs模式出现在THz波段,最大单向带宽达到3.9 THz.     

On the Main Mode of Trapezoidal-Groove Guide By Finite Element Method

In this paper, the propagation properties such as the dispersion characteristics, cut-off wavelength, guide wavelength and field distribution for the main mode of trapezoidal-groove guide are analysed by using the finite element method. The dispersion is very low, and the field distribution in a trapezoidal-groove guide is similar to that of rectangular one. The results have important values in design, manufacture, and application of groove guides.     

Dominant mode characteristics of circular groove guide

Circular groove guide is a kind of waveguide for millimeter waves with low loss, large dimensions, and low dispersion. In this paper, the dominant mode characteristics of it is analysed. The technique that mode macthing method combines with point matching method is used to derive the Nth-order characteristic equation of the guide. The 1st order, 2nd order and 3rd order approximate curves that the normalized cutoff wavelength of circular groove guide varies with c/a are given. The attenuation curves are given at 1mm, 1.5mm and 3mm wavelength. The numerical results are in well agreement with the experimental results published.Supported by National Science Foundation of P. R. China     

Effect of background plasma on electromagnetic properties of coaxial gyrotron cavity

We analyze the effect of the background plasma on the electromagnetic properties of coaxial resonators with a smooth and a corrugated inner conductors used in high-power gyrotrons. It is shown that the plasma produces different effects on the modes with different signs of the azimuthal index, leading to a decrease or an increase in the resonance frequencies. A modification of the distributions of electromagnetic fields and the electromagnetic energy density by the background plasma occurs in such a way that Ohmic losses decrease both on the inner and on the outer conductors. In the case of a smooth inner conductor, this is due to a decrease in the field strengths on the surface of the conductors. If the inner conductor is corrugated, the background plasma leads to an increase in the field strengths on its surface. Nevertheless, the relative Ohmic loss power decreases due to an increase in the energy density in the resonator (which is also caused by the background plasma). Calculations were mainly performed for a coaxial resonator of a gyrotron operating on the TE34.19 mode (Karlsruhe, Germany).