Rhenium(V) oxocomplexes with novel pyrazolyl-based N4- and N3S-donor chelators

The novel pyrazolyl-based ligands 3,5-Me2pz(CH2)2NH(CH2)2NH(CH2)2NH2 and pz*(CH2)2NH-Gly-CH2STrit (pz*=pz, 3,5-Me2pz, 4-(EtOOC)CH(2)-3,5-Me2pz) were synthesized, and their suitability to stabilize Re(V) oxocomplexes was evaluated using different starting materials, namely (NBu4)[ReOCl4], [ReOCl3(PPh3)2] and trans-[ReO2(py)4]Cl. Compound reacts with trans-[ReO2(py)4]Cl yielding the cationic compound [ReO(OMe){3,5-Me2pz(CH2)2N(CH2)2NH(CH2)2NH2}](BPh4) in a low isolated yield. In contrast, the neutral complexes [ReO{pz*(CH2)2NH-Gly-CH2S}] (pz*=pz, 3,5-Me2pz, 4-(EtOOCCH2)-3,5-Me2pz) were synthesized almost quantitatively by reacting [ReOCl3(PPh3)2] or (NBu4)[ReOCl4] with the trityl-protected chelators. The X-ray diffraction analysis of and confirmed the tetradentate coordination mode of the respective ancillary ligands. In the monoanionic chelator coordinates to the metal through four nitrogen atoms, while in the chelator is trianionic, coordinating to the metal through three nitrogens and one sulfur atom. Solution NMR studies of , including two-dimensional NMR techniques (1H COSY and 1H/13C HSQC), confirmed that the N3S coordination mode of the chelators is retained in solution. Unlike , complexes may be considered relevant in the development of radiopharmaceuticals, as further corroborated by the synthesis of the congener [99mTcO{pz(CH2)2-NH-Gly-CH2S}]. This radioactive compound was obtained from 99mTcO4- in aqueous medium, in almost quantitative yield and with high specific activity and radiochemical purity.     

ReO(N2O2)X] complexes: "4 + 1"?

[ReO(ppme)X] (where ppme(2-) is 2,5-diazo-N,N'-dimethylhexyl-1,6-bis(phenylphosphinate), X = Br0.3Cl0.7) has been synthesized via a substitution reaction and structurally characterized. The coordination geometry is a distorted octahedron and one phosphinate coordinates cis and the other trans to the oxo O atom. This coordination mode is conserved in all [ReOppmeX] complexes synthesized in this study. [ReO(ppme)Cl] has been prepared by a reduction/complexation reaction from [NH4][ReO4]. [ReO(ppme)Cl] reacts with thiocyanate and benzene thiolate forming [ReO(ppme)X] (X = (-)NCS, (-)SC6H5), but the one-pot synthesis of the respective ternary thiolate complexes from perrhenate was not successful. The reduction/complexation reaction of a thiol, H2ppmeCl4, and perrhenate resulted in the formation of [H3ppme][ReO(SR)4], the reaction of which with [ReO(ppme)Cl] does not lead to [ReO(ppme)SR] in high yields.     

Synthesis and characterization of six-coordinate "3 + 2" mixed-ligand oxorhenium complexes with the o-diphenylphosphinophenolato ligand and tridentate coligands of different N and S donor atom combinations

A series of octahedral six-coordinate oxorhenium(V) mixed ligand complexes containing the common [ReO(L)]2+ fragment (L = o-OC6H4P(C6H5)2] have been synthesized and characterized. Hence, it was shown that the [ReO(L)]2+ moiety can accommodate a variety of tridentate ligands containing a central amine group amenable to deprotonation and different combinations of lateral groups, such as ethylamine, substituted ethylamine, ethylthiol, and ethylthioether arms. In particular, by reaction of equimolar amounts of the pertinent HLn ligands with the [(n-C4H9)4N][ReOCl3(L)] precursor in refluxing acetonitrile/methanol or dichloromethane/methanol mixtures, the following series of [ReO(Ln)(L)]+/0 oxorhenium(V) complexes has been generated: ReO[[N(CH2CH2NH2)2][o-OC6H4P(C6H5)2]]Cl (1); ReO[[C2H5)2NCH2CH2NCH2CH2S][o-OC6H4P5)2]] (2); ReO[[(CH2)4NCH2CH2NCH2CH2S][o-OC6H4P(C6H4P(C6H5)2]] (3); and ReO[[C2H5SCH2CH2NCH2CH2S][o-OC6H4P(C6H5)2]] (4). The complexes are closed-shell 18-electron oxorhenium species, which adopt octahedral geometries both in solution and in the solid state, as established by conventional physicochemical techniques including multinuclear NMR and single-crystal X-ray diffraction analyses.     

Seven-coordinate [ReVON4X2]+ complexes (X = O and Cl)

The oxorhenium(V) complexes with ligands containing N4 (H2pmen) and N4O2 (H2bbpen, H2Clbbpen, and H2bped) donor atom sets have been synthesized. X-ray crystallographic analyses of the [ReO(H2pmen)Cl2]+, [ReO(bbpen)]+, and [ReO(bped)]+ complexes showed that all three cations share a rare seven-coordinate structure with a distorted pentagonal bipyramidal geometry, which represents a novel and potentially general structural motif in ReV = O complexes. 1H NMR spectroscopy shows that the structures of the complexes are retained in the solution.     

Rhenium(V) and technetium(V) complexes with phosphoraneimine and phosphoraneiminato ligands

Air-stable rhenium(V) nitrido complexes are formed when [ReOCl3(PPh3)2], [NBu4][ReOCl4], or [NBu4][ReNCl4] are treated with an excess of silylated phosphoraneiminates of the composition Me3SiNPPh3 or Ph2P(NSiMe3)CH2PPh2 in CH2Cl2. Complexes of the compositions [ReNCl(Ph2PCH2PPh2NH)2]Cl (1), [ReN(OSiMe3)(Ph2PCH2PPh2NH)2]Cl (2) or [ReNCl2(PPh3)2] (3) were isolated and structurally characterized. The latter compound was also produced during a reaction of the rhenium(III) precursor [ReCl3(PPh3)2(CH3CN)] and Me3SiNPPh3. Nitrogen transfer from the phosphorus to the rhenium atoms and the formation of nitrido ligands were observed in all examples. All products of reactions with an excess of the potentially chelating phosphoraneiminate Me3SiNP(Ph2)CH2PPh2 contain neutral Ph2PCH2PPh2NH ligands. The required protons are supplied by a metal-induced decomposition of the solvent dichloromethane. The Re-N(imine) bond lengths (2.055-2.110 A) indicate single bonds, whereas the N-P bond with lengths between 1.596 A and 1.611 A reflect considerable double bond character. An oxorhenium(V) phosphoraneiminato complex, the dimeric compound [ReOCl2(mu-N-Ph2PCH2PPh2N)]2 (4), is formed during the reaction of [NBu4][ReOCl4] with an equivalent amount of Ph2P(NSiMe3)CH2PPh in dry acetonitrile. The blue neutral complex with two bridging phosphoraneiminato units is stable as a solid and in dry solvents. It decomposes in solution, when traces of water are present. The rhenium-nitrogen distances of 2.028(3) and 2.082(3) A are in the typical range of bridging phosphoraneiminates and an almost symmetric bonding mode. Technetium complexes with phosphoraneimine ligands were isolated from reactions of [NBu4][TcOCl4] with Me3SiNPPh3, and [NBu4][TcNCl4] with Me3SiNP(Ph2)CH2PPh2. Nitrogen transfer and the formation of a five-coordinate nitrido species, [TcNCl2(HNPPh3)2] (5), was observed in the case of the oxo precursor, whereas reduction of the technetium(VI) starting material and the formation of the neutral technetium(V) complex [TcNCl2(Ph2PCH2PPh2NH)] (6) or [TcNCl(Ph2PCH2PPh2NH)2]Cl (7) was observed in the latter case. Both technetium complexes are air stable and X-ray structure determinations show bonding modes of the phosphoraneimines similar to those in the rhenium complexes.     

Rhenium(V) oxo complexes with N-heterocyclic carbenes

Air-stable rhenium(V) oxo complexes are formed when [ReOCl(3)(PPh(3))(2)] is treated with N-heterocyclic carbenes of the 1,3-dialkyl-4,5-dimethylimidazol-2-ylidene type, L(R) (R = Me, Et, i-Pr). Complexes of the compositions [ReO(2)(L(R))(4)](+), [ReOCl(L(R))(4)](2+), or [ReO(OMe)(L(R))(4)](2+) can be isolated depending on the alkyl substituents at the nitrogen atoms of the ligands and the reaction conditions applied. Despite the steric overcrowding of the equatorial coordination spheres of the metal atoms by each of the four carbene ligands, stable complexes with six-coordinate rhenium atoms are obtained. Steric demands of the alkyl groups allow control of the stability of the mono-oxo intermediates. Air-stable cationic complexes of the compositions [ReOCl(L(Me))(4)](2+), [ReOCl(L(Et))(4)](2+), and [ReO(OMe)(L(Me))(4)](2+) have been isolated, whereas reactions of [ReOCl(3)(PPh(3))(2)] or other rhenium(V) precursors with the more bulky 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene (L(i)(-)(Pr)) directly yield the dioxo complex [ReO(2)(L(i)(-)(Pr))(4)](+). X-ray structures of [ReO(2)(L(i)(-)(Pr))(4)][ReO(4)], [ReO(2)(L(i)(-)(Pr))(4)][PF(6)], [ReO(2)(L(Me))(4)][ReO(4)](0.45)[PF(6)](0.55), [ReO(MeOH)(L(Me))(4)][PF(6)](2), and [ReOCl(L(Et))(4)][PF(6)](2) show that the equatorial coordination spheres of the rhenium atoms are essentially planar irrespective of the steric demands of the individual carbene ligands.     

Diazo complexes of rhenium: preparations and crystal structures of the bis(dinitrogen), [Re(N2)2(PPh(OEt)2)4][BPh4] and methyldiazenido [ReCl(CH3N2)(CH3NHNH2)(PPh(OEt)2)3][BPh4] derivatives

Depending on experimental conditions and the nature of the hydrazine, the reactions of ReCl3P3 [P = PPh(OEt)2] with RNHNH2 (R = H, CH3, tBu) afford the bis(dinitrogen) [Re(N2)2P4]+ (2+), dinitrogen ReClN2P4 (3), and methyldiazenido [ReCl(CH3N2)(CH3NHNH2)P3]+ (1+) derivatives. In contrast, reactions of ReCl3P3 [P = PPh(OEt)2, PPh2OEt] with arylhydrazines ArNHNH2 (Ar = Ph, p-tolyl) give the aryldiazenido cations [ReCl(ArN2)(ArNHNH2)P3]+ (4+) and [ReCl(ArN2)P4]+ (7+) and the bis(aryldiazenido) cations [Re(ArN2)2P3]+ (5+, 6+). These complexes were characterized spectroscopically (IR; 1H and 31P NMR), and the BPh4 complexes 1, 2, and 7 were characterized crystallographically. The methyldiazenido derivative [ReCl(CH3N2)(CH3NHNH2)(PPh(OEt)2)3][BPh4] (1) crystallizes in space group P1 with a = 15.396(5) A, b = 16.986(5) A, c = 11.560(5) A, alpha = 93.96(5) degrees, beta = 93.99(5) degrees, gamma = 93.09(5) degrees, and Z = 2 and contains a singly bent CH3N2, group bonded to an octahedral central metal. One methylhydrazine ligand, one Cl- trans to the CH3N2, and three PPh(OEt)2 ligands complete the coordination. The complex [Re(N2)2(PPh(OEt)2)4][BPh4] (2) crystallizes in space group Pbaa with a = 23.008(5) A, b = 23.367(5) A, c = 12.863(3) A, and Z = 4. The structure displays octahedral coordination with two end-on N2 ligands in mutually trans positions. [ReCl(PhN2)(PPh(OEt)2)4][BPh4] (7) crystallizes in space group P2(1)/n with a = 19.613(5) A, b = 20.101(5) A, c = 19.918(5) A, beta = 115.12(2) degrees, and Z = 4. The structure shows a singly bent phenyldiazenido group trans to the Cl- ligand in an octahedral environment. The dinitrogen complex ReClN2P4 (3) reacts with CF3SO3CH3 to give the unstable methyldiazenido derivative [ReCl(CH3N2)P4][BPh4]. Reaction of the methylhydrazine complex [ReCl(CH3N2)(CH3NHNH2)P3][BPh4] (1) with Pb(OAc)4 at -30 degrees C results in selective oxidation of the hydrazine, affording the corresponding methyldiazene derivative [ReCl(CH3N=NH)(CH3N2)P3][BPh4] (8). In contrast, treatment with Pb(OAc)4 of the related arylhydrazines [ReCl(ArN2)(ArNHNH2)P3][BPh4] (4) [P = PPh(OEt)2] gives the bis(aryldiazenido) complexes [Re(ArN2)2P3][BPh4] (5). Possible protonation reactions of Br?nsted acids HX with all diazenides, 1, 4, 5, 6, and 8, were investigated and found to proceed only in the cases of the bis(aryldiazenido) complexes 5 and 6, affording, with HCl, the octahedral [ReCl(ArN=NH)(ArN2)P3][BPh4] or [ReCl(Ar(H)NN)(ArN2)P3][BPh4] (10) (Ar = Ph; P = PPh2OEt) derivative.     

Rhenium(V) oxo complexes with acetylacetone derived Schiff bases: structure and catalytic epoxidation

Substitution reactions of rhenium(V) oxo precursors [ReOCl3(PPh3)2] or [NBu4][ReOCl4] with the bidentate acetylacetone-derived ketoamine ligands APOH = 4-anilino-3-penten-2-one, DPOH = 4-[2,6-dimethylanilino]-3-penten-2-one, and MTPOH = 4-[2-(methylthio)anilino]-3-penten-2-one gave the complexes [ReO(APO)Cl2(PPh3)] (1), [ReO(DPO)Cl2(PPh3)] (2), and [NBu4][ReOLCl3] (3, L = APO; 4, L = DPO; 5, L = MTPO), respectively. All complexes exhibit only one ketoamino chelate, independent of the amount of ligand added to the rhenium precursors. The complexes were characterized by 1H and 13C NMR spectroscopy. X-ray crystal structures of the complexes 1, 2, 4, and 5, including that of MTPOH, were determined, revealing the trans position of the two oxygen atoms and the trans-Cl,Cl conformation in 1 and 2, in contrast to most other rhenium complexes of this type where the cis-Cl,Cl conformation is observed. Coordination of the potentially tridentate ligand MTPOH in 5 is bidentate with a dangling thioether substituent. Compound 2 shows catalytic activity in the oxidation of cis-cyclooctene with tert-butylhydroperoxide.     

Syntheses and structures of pyrazolylmethane complexes of rhenium(III), (IV) and (V)

Reaction of [ReOCl3(PPh3)(2)] with HCpz(3) (pz = pyrazole) in dichloromethane leads to the formation of a new Re(iv) complex [ReCl3(HCpz3)]X (X=Cl, [ReO4]) with loss of the rhenium-oxo group. We also report a convenient, high-yield synthetic route to complexes of the type [ReOXn(L)](3-n)+ (X=Cl, Br, n = 2, 3) by the reaction of bis(pyrazolylmethane) and bis(pyrazolylacetate) ligands with [ReOCl3(PPh3)2]. Dinuclear complexes containing the O=Re-O-Re=O group were also isolated and structurally characterised. We have also investigated the reactions of these ligands with diazenide precursors and isolated and characterised complexes of the type [ReClx(N2Ph) (L)(PPh3)] (x = 1,2). The potential applications of these complexes as radiopharmaeuticals is discussed.     

Synthesis and characterization of novel rhenium(V) tetradentate N2O2 Schiff base monomer and dimer complexes

Several rhenium(V) oxo complexes with tetradentate N(2)O(2) Schiff base ligands were synthesized and characterized. The general synthetic procedure involved reaction of [NBu(4)][ReOCl(4)] with a tetradentate Schiff base ligand (L(1) = N,N'-ethylenebis(acetylacetoneimine), (acac(2)en) or L(2) = N,N'-propylenebis(acetylacetoneimine) (acac(2)pn)) in ethanol solution to generate complexes of the form trans-ReOX(L) where X = Cl(-), MeO(-), ReO(4)(-), or H(2)O. The product isolated from the reaction was found to be dependent on the reaction conditions, in particular the presence or absence of water and/or base. The mu-oxo-Re(2)O(3)(L)(2) dimers were synthesized and characterized for chemical and structural comparison to the related monomers. Conversion of the monomer to its dimer analogue was followed qualitatively by spectrophotometry. The complexes were characterized by (1)H and (13)C NMR, UV-vis, and IR spectroscopy, elemental analysis, and single crystal X-ray diffraction. The crystallographic data reported for the structures are as follows: trans-[ReO(OH(2))(acac(2)en)]Cl (H(20)C(12)ClN(2)O(4)Re) 1, triclinic (Ponemacr;), a = 7.2888(6) A, b = 9.8299(8) A, c = 10.8195(9) A, alpha = 81.7670(10) degrees, beta = 77.1510(10) degrees, gamma = 87.6200(10) degrees, V = 747.96(11) A(3), Z = 2; trans-[ReO(OReO(3))(acac(2)en)] (H(18)C(12)N(2)O(7)Re(2)) 2, monoclinic (P2(1)/c), a = 7.5547(4) A, b = 8.7409(5) A, c= 25.7794(13) A, beta = 92.7780(10) degrees, V = 1700.34(16) A(3), Z = 4; trans-[ReOCl(acac(2)pn)] (H(20)C(13)N(2)O(3)ClRe) 3, monoclinic (P2(1)/c), a = 8.1628(5) A, b = 13.0699(8) A, c = 28.3902(17) A, beta = 97.5630(10) degrees, V = 3002.5(3) A(3), Z = 8; trans-[ReO(OMe)(acac(2)pn)] (H(23)C(14)N(2)O(4)Re) 4, monoclinic (P2(1)/c), a = 6.7104(8) A, b = 27.844(3) A, c = 8.2292(9) A, beta = 92.197(2) degrees, V = 1536.4(3) A(3), Z = 4; trans-[mu-oxo-Re(2)O(3)(acac(2)en)(2)] (H(36)C(24)N(4)O(7)Re(2)) 5, monoclinic (P2(1)/n), a = 9.0064(5) A, b = 12.2612(7) A, c = 12.3695(7) A, beta = 90.2853(10) degrees, V = 1365.94(13) A(3), Z = 2; and trans-[mu-oxo Re(2)O(3)(acac(2)pn)(2)] (H(40)C(26)N(4)O(7)Re(2)) 6, monoclinic (P2(1)/n), a = 9.1190(5) A, b = 12.2452(7) A, c = 12.8863(8) A, beta = 92.0510(10) degrees, V = 1438.01(14) A(3), Z = 2.     

Synthesis and structural characterization of new oxorhenium and oxotechnetium complexes with XN2S-tetradentate semi-rigid ligands (X = O, S, N)

Twelve novel oxo-technetium and oxo-rhenium complexes based on N2S2-, N2SO- or N3S-tetradentate semi-rigid ligands have been synthesised and studied herein. By reacting the ligands with a slight excess of suitable [MO]3+ precursor (ReOCl3(PPh3)2 or [NBu4][99gTcOCl4]), the monoanionic complexes of general formula [MO(Ph-XN2S)]- could be easily produced in high yield. The complexes have been characterized by means of IR, electrospray mass spectrometry, elemental analysis, NMR and conductimetry. The crystal structures of [PPh4][ReO(Ph-ON2S)] 1b and [NBu4][99gTcO(Ph-ON2S)] 1c have been established. The [MO]3+ moiety was coordinated via the two deprotonated amide nitrogens, the oxygen and the terminal sulfur atoms in 1b and 1c. In both compounds, the ON2S coordination set is in the equatorial plane, and the complexes adopted a distorted square-pyramidal geometry with an axial oxo-group. The chemical and structural identity of the different prototypic complexes (rhenium, 99gTc complexes and their corresponding 99mTc radiocomplexes) have been also established by a comparative HPLC study.     

Re(V) and Re(III) complexes with sal2phen and triphenylphosphine: rearrangement, oxidation and reduction

Reactions of Re(V), tetradentate Schiff base complexes with tertiary phosphines have previously yielded both rearranged Re(V) and reduced Re(III) complexes. To further understand this chemistry, the rigid diiminediphenol (N(2)O(2)) Schiff base ligand sal(2)phen (N,N'-o-phenylenebis(salicylaldimine)) was reacted with (n-Bu(4)N)[ReOCl(4)] to yield trans-[ReOCl(sal(2)phen)] (1). On reaction with triphenylphosphine (PPh(3)), a rearranged Re(V) product cis-[ReO(PPh(3))(sal(2)phen*)]PF(6) (2), in which one of the imines was reduced to an amine during the reaction, and the reduced Re(III) products trans-[ReCl(PPh(3))(sal(2)phen)] (4) and trans-[Re(PPh(3))(2)(sal(2)phen)](+) (5) were isolated. Reaction of sal(2)phen with [ReCl(3)(PPh(3))(2)(CH(3)CN)] resulted in the isolation of [ReCl(2)(PPh(3))(2)(salphen)] (3). The compounds were characterized using standard spectroscopic methods, elemental analyses and single crystal X-ray crystallography.     

Octahedral Ru(II) amido complexes TpRu(L)(L')(NHR) (Tp = hydridotris(pyrazolyl)borate; L = L' = P(OMe)3 or PMe3 or L = CO and L' = PPh3; R = H,Ph, or tBu): synthesis,characterization, and reactions with weakly acidic C-H bonds

The octahedral Ru(II) amine complexes [TpRu(L)(L')(NH(2)R)][OTf] (L = L' = PMe(3), P(OMe)(3) or L = CO and L' = PPh(3); R = H or (t)Bu) have been synthesized and characterized. Deprotonation of the amine complexes [TpRu(L)(L')(NH(3))][OTf] or [TpRu(PMe(3))(2)(NH(2)(t)Bu)][OTf] yields the Ru(II) amido complexes TpRu(L)(L')(NH(2)) and TpRu(PMe(3))(2)(NH(t)Bu). Reactions of the parent amido complexes or TpRu(PMe(3))(2)(NH(t)Bu) with phenylacetylene at room temperature result in immediate deprotonation to form ruthenium-amine/phenylacetylide ion pairs, and heating a benzene solution of the [TpRu(PMe(3))(2)(NH(2)(t)Bu)][PhC(2)] ion pair results in the formation of the Ru(II) phenylacetylide complex TpRu(PMe(3))(2)(C[triple bond]CPh) in >90% yield. The observation that [TpRu(PMe(3))(2)(NH(2)(t)Bu)][PhC(2)] converts to the Ru(II) acetylide with good yield while heating the ion pairs [TpRu(L)(L')(NH(3))][PhC(2)] yields multiple products is attributed to reluctant dissociation of ammonia compared with the (t)butylamine ligand (i.e., different rates for acetylide/amine exchange). These results are consistent with ligand exchange reactions of Ru(II) amine complexes [TpRu(PMe(3))(2)(NH(2)R)][OTf] (R = H or (t)Bu) with acetonitrile. The previously reported phenyl amido complexes TpRuL(2)(NHPh) [L = PMe(3) or P(OMe)(3)] react with 10 equiv of phenylacetylene at elevated temperature to produce Ru(II) acetylide complexes TpRuL(2)(C[triple bond]CPh) in quantitative yields. Kinetic studies indicate that the reaction of TpRu(PMe(3))(2)(NHPh) with phenylacetylene occurs via a pathway that involves TpRu(PMe(3))(2)(OTf) or [TpRu(PMe(3))(2)(NH(2)Ph)][OTf] as catalyst. Reactions of 1,4-cyclohexadiene with the Ru(II) amido complexes TpRu(L)(L')(NH(2)) (L = L' = PMe(3) or L = CO and L' = PPh(3)) or TpRu(PMe(3))(2)(NH(t)Bu) at elevated temperatures result in the formation of benzene and Ru hydride complexes. TpRu(PMe(3))(2)(H), [Tp(PMe(3))(2)Ru[double bond]C[double bond]C(H)Ph][OTf], [Tp(PMe(3))(2)Ru=C(CH(2)Ph)[N(H)Ph]][OTf], and [TpRu(PMe(3))(3)][OTf] have been independently prepared and characterized. Results from solid-state X-ray diffraction studies of the complexes [TpRu(CO)(PPh(3))(NH(3))][OTf], [TpRu(PMe(3))(2)(NH(3))][OTf], and TpRu(CO)(PPh(3))(C[triple bond]CPh) are reported.     

Synthesis, characterization, and stereochemistry of oxorhenium(V) complexes with 2-aminoethanethiolate

A series of oxorhenium(V) complexes with 2-aminoethanethiolate (aet), [ReO(aet-N,S)(D-pen-N,O,S)] (2), [[ReO(aet-N,S)(2)](2)O] (3), [ReO(Cl)(aet-N,S)(2)] (4), and [ReO(aet-N,S)(Haet-S)(2)]Cl(2) ([5]Cl(2)) was newly prepared starting from ReO(4)(-). The reaction of NH(4)ReO(4) with a 1:1 mixture of Haet.HCl and D-H(2)pen (D-penicillamine) in the presence of SnCl(2).2H(2)O in water gave 2, 3, and the known complex [ReO(D-Hpen-N,S)(D-pen-N,O,S)] (1). These complexes were fractionally precipitated by controlling the pH of the reaction solution. The complex 2 was also prepared in a higher yield by a similar reaction using methanol as a solvent. The crystal structure of 2 was determined by X-ray crystallography; 2 crystallizes in the tetragonal space group P4(3) with a = 9.621(1), c = 12.911(1) A, V = 1195.0(3) A(3), and Z = 4. The oxorhenium(V) core in 2 is coordinated by a bidentate-N,S aet ligand and a tridentate-N,O,S D-pen ligand, having a distorted octahedral geometry with a cis-N cis-S configuration in the equatorial plane perpendicular to the O-Re-O axis. The 1:2 reaction of NH(4)ReO(4) with Haet.HCl in the presence of SnCl(2).2H(2)O in methanol produced 4, which is interconvertible with 3, while the corresponding 1:3 reaction resulted in the isolation of [5]Cl(2). The complexes 4 and 5 were also structurally characterized; 4 crystallizes in the monoclinic space group P2(1)/c with a = 6.839(1), b = 10.0704(6), c = 14.1075(8) A, beta = 91.729(8) degrees, V = 971.2(2) A(3), and Z = 4, while [5]Cl(2) crystallizes in the triclinic space group P1 with a = 11.938(3), b = 12.366(3), c = 5.819(1) A, alpha = 102.71(2), beta = 101.28(2), gamma = 75.41(2) degrees, V = 802.0(3) A(3), and Z = 2. In 4, the oxorhenium(V) core is octahedrally coordinated by two bidentate-N,S aet ligands, which form a cis-N cis-S configurational equatorial plane with a Cl(-) ion trans to the oxo ligand. On the other hand, the oxorhenium(V) core in [5](2+) is coordinated by one bidenate-N,S aet and two monodentate-S Haet ligands, having a distorted trigonal-bipyramidal geometry with S and N donors at the apical positions.     

Oxorhenium phosphinophenolato complexes with model peptide fragments: synthesis, characterization, and stability considerations

The synthesis and characterization of a series of mixed-ligand oxorhenium(V) complexes containing the o-diphenylphosphinophenolato ligand (HL) and model peptide fragments acting as the tridentate coligand are reported. Thus, by reacting equimolar amounts of tiopronin, Gly-Gly, Gly-L-Phe, or glutathione (GSH) peptides on the [(n-C4H9)4N][ReOCl3(L)] precursor in refluxing MeCN/MeOH or aqueous MeCN/MeOH mixtures, the following complexes were obtained: ReO([SC(CH3)CONCH2COO][L])[(n-C4H9)4N], 1, ReO([H2NCH2CONCH2COO][L]), 2, ReO)[H2NCH2CONCH(CH2C6H5)COO][L]), 3, and ReO([SCH2CH(NHCOCH2CH2CHNH2COOH)CONCH2COO][L])Na, 4. The compounds are closed-shell 18-electron oxorhenium species adopting a distorted octahedral geometry, as demonstrated by classical spectroscopical methods including multinuclear NMR. X-ray diffraction analyses for 1 and 2 are also reported. By comparative stability studies of complexes 1-3 against excess GSH it was shown that complex 3 containing the bulky C6H5CH2 substituent adjacent to the coordinated carboxylate group of Phe is the most stable complex.     

Rhenium complexes with 2-(diphenylphosphinomethyl)aniline: formation of a cyclic, trinuclear oxorhenium(V) core

Reactions of 2-(diphenylphosphinomethyl)aniline, H(2)L(2), with (NBu(4))[ReOCl(4)] yield different oxo rhenium(V) complexes depending on the conditions applied. This comprises monomeric compounds such as [ReOCl(3)(H(2)L(2))] (1), [ReOCl(2)(OMe)(H(2)L(2))] (2), or [ReO(2)(H(2)L(2))(2)]Cl (5) as well as the dimeric μ-oxo complex [{ReOCl(2)(H(2)L(2))}(2)]O] (3) and the oxo-bridged trimer [{ReOCl(H(2)L(2))}O](3) (4). The latter compound represents the first example of a hitherto unknown trinuclear, cyclic oxo(V) core. [{ReOCl(H(2)L(2))}O](3) contains a tensed 6-membered metallacycle, which readily undergoes rearrangements and reactions with additional ligands. Compounds of the compositions 5 and [ReO(2)(H(2)L(2))(H(2)L(1))]Cl (6) were isolated either from the decomposition of 4 in CH(2)Cl(2)/n-pentane or from reactions with 2-(diphenylphosphino)aniline, H(2)L(1).     

Structural characterization of a lanthanum bistriflimide complex, La(N(SO2CF3)2)3(H2O)3, and an investigation of La, Sm, and Eu electrochemistry in a room-temperature ionic liquid, [Me3N(n)Bu][N(SO2CF3)2

The reduction of selected lanthanide cations to the zerovalent state in the room-temperature ionic liquid [Me3N(n)Bu][TFSI] is reported (where TFSI = bistriflimide, [N(SO2CF3)2]-). The lanthanide cations were introduced to the melt as the TFSI hydrate complexes [Ln(TFSI)3(H2O)3] (where Ln = La(III), Sm(III) or Eu(III)). The lanthanum compound [La(TFSI)3(H2O)3] has been crystallographically characterized, revealing the first structurally characterized f-element TFSI complex. The lanthanide in all three complexes was shown to be reducible to the metallic state in [Me3N(n)Bu][TFSI]. For both the Eu and Sm complexes, reduction to the metallic state was achieved via divalent species, and there was an additional observation of the electrodeposition of Eu metal.     

Solution and solid-state preparation of 18-crown[6] complexes with M[HSO4]n salts (M = NH4+, K+, Sr2+ and n = 1, 2) and an investigation of solvation/desolvation processes and crystal polymorphism

18-Crown[6] ether has been used to prepare a new class of organic-inorganic complexes of general formula 18-crown[6]M[HSO(4)](n) (where M = NH(4) (+), K(+), Sr(2+) and n = 1, 2) by reacting directly in solution or in the solid state the crown ether 18-crown[6] with inorganic salts such as [NH(4)][HSO(4)], K[HSO(4)], and Sr[HSO(4)](2). The structures of 18-crown[6][NH(4)][HSO(4)]2 H(2)O (12 H(2)O), 18-crown[6][NH(4)][HSO(4)] (1), 18-crown[6]K[HSO(4)]2 H(2)O (22 H(2)O), 18-crown[6]K[HSO(4)] (2), and 18-crown[6]Sr[HSO(4)](2) (3) have been characterized by single-crystal X-ray diffraction. The reversible water loss in compounds 12 H(2)O and 22 H(2)O leads to formation of the corresponding anhydrous phases 18-crown[6][NH(4)][HSO(4)] (1), and 18-crown[6]K[HSO(4)] (2), which undergo, on further heating, enantiotropic solid-solid transitions very likely associated with the on-set of a solid state dynamical process. Similar high-temperature behavior is shown by 18-crown[6]Sr[HSO(4)](2) (3). The dehydration and phase-transition processes have been investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and variable temperature X-ray powder diffraction.     

A series of [3 + 2] cycloaddition products from the reaction of rhenium oxo complexes with diphenyl ketene

The reaction of rhenium (VII) trioxo complexes containing the ligand sets scorpionate, [HB(pz)3]ReO3 (6), [Ph-B(pz)3]ReO3 (7), and [[HC(pz)3]ReO3][ReO4] (8) and pyridine/pyridine-type ligands [(4,7-diphenyl-1,10-phen)(Br)ReO3] (12), [(4,4'-di-tert-butyl-2,2'-dipyridyl)(Cl)ReO3] (13), and [(py)2Re(Cl)O3] (4), with diphenyl ketene, has led to the isolation of six novel [3 + 2] cycloaddition products. These air-stable solids 9-11 and 15-17 are the result of [3 + 2] addition of the O=Re=O motif across the ketene C=C double bond. Five of the six [3 + 2] cycloaddition products have been structurally characterized by single-crystal X-ray diffraction and in all cases by 13C NMR and IR spectroscopies.     

Trithiacyclononane as a ligand for potential technetium and rhenium radiopharmaceuticals: synthesis of [M(9S3)(SC2H4SC2H4S)][BF4] (M = 99Tc, Re, 188Re) via C-S bond cleavage

Chemical or electrochemical reduction of the 1,4,7-trithiacyclononane (9S3) complexes [MII(9S3)2][BF4]2 (M = Re (3a) or Tc (3b)) results in instantaneous C-S bond cleavage to yield ethene and the stable MIII thiolate complexes [MIII(9S3)L][BF4] (M = Re (4a) or Tc (4b), L = SCH2CH2SCH2CH2S). Compounds 4 have been characterized by 1H NMR spectroscopy, and the pseudo-octahedral geometry of 4b has been confirmed by X-ray crystallography. Upon electrochemical reduction 4a loses ethene, while 4b can be reversibly reduced to [TcII(9S3)L], which is then further reduced to Tc(I) with loss of ethene. Successive ethene loss is observed in the mass spectra of compounds 3 and 4. The radiosynthesis of 4a with 188Re can be comfortably completed within 10 min starting with 188ReO4- from a 188W/188Re generator, with a radiochemical yield in excess of 90%, and thus represents a practical approach to the preparation of stable 188Re (and 99mTc) thioether complex derivatives/conjugates for clinical use. Crystal data: 4b, C10H20S6Tc, orthorhombic Pbca, a = 12.233(2) A, b = 14.341(2) A, c = 20.726(3) A, Z = 8.