Fabrication of monometallic (Co,Pd, Pt,Au) and bimetallic (Pt/Au,Au/Pt) thin films with hierarchical architectures as electrocatalysts

Co thin films with novel hierarchical structures were controllably fabricated by simple electrochemical deposition in the absence of hard and soft templates, which were used as sacrificial templates to further prepare noble metal (Pd, Pt, Au) hierarchical micro/nanostructures via metal exchange reactions. SEM characterization demonstrated that the resulting noble metal thin films displayed hierarchical architectures. The as-prepared noble metal thin films could be directly used as the anode catalysts for the electro-oxidation of formic acid. Moreover, bimetallic catalysts (Pt/Au, Au/Pt) fabricated based on the monometallic Au, Pt micro/nanostructures exhibited the higher catalytic activity compared to the previous monometallic catalysts.     

电化学去合金化Pt(Pd)-Cu对氧的电催化还原活性的研究

应用电化学去合金法制备了表面覆盖有Pt(Pd)原子层的Pt(Pd)-Cu合金催化剂.研究该催化剂在0.1mol.L-1HClO4酸性溶液中对氧气电化学还原的催化活性,并采用同步辐射反常X-射线衍射法(Anomalous X-ray Diffraction,AXRD)和表面X-射线散射法(Surface X-ray Scattering,SXS)从原子尺度研究了去合金化后催化剂的结构.分析对比纳米颗粒、薄膜和单晶3种不同形式的去合金化Pt-Cu的结构和催化活性以及Pt-Cu和Pd-Cu两种不同合金薄膜的结构和催化活性.结果表明,表面应力是影响催化剂催化活性的关键因素,而应力大小则与去合金化后所形成的表面Pt(Pd)层的厚度相关,材料尺寸和组成元素等都影响表面Pt(Pd)层的厚度.提出可利用调控材料表面的应力来设计高催化活性的催化剂.     

Dynamic light scattering studies of additive effects on the microstructure of aqueous gemini micelles

Dynamic light scattering (DLS) measurements have been performed at 30 degrees C to see the effects of additives on the microstructure of gemini alkanediyl-alpha,omega-bis(dimethylcetylammonium bromide) surfactants, (Br-, n-C16H33N+Me2-(CH2)s-Me2- N+n-C16H33, Br-, 16-s-16, where s = 4, 5, 6). In pure aqueous solutions, the hydrodynamic diameter, Dh, was found to increase rapidly with geminis in comparison to their monomeric counterpart cetyltrimethylammonium bromide (n-C16H33N+Me3, Br-, CTAB) on increasing surfactant concentration. The additives considered in the present study are n-alcohols (C4-C6OH) and n-hexylamine (C6NH2) on the micellar growth of 0.03 M 16-4-16 in the presence and absence of 0.001 M KBr. The presence of 0.001 M KBr or organic additives at lower concentrations singly or jointly has little effect on the micellar size. As the chain length of the additive increases, the size increases with the increase of additive concentration, the magnitude being substantial in the presence of 0.001 M KBr. However, for equal chain length additives (C6OH, C6NH2), the effect was greater for C6OH. In case of C6NH2, the value of Dh reaches to almost constancy when the concentration of the additive was increased. Increased effectiveness of additives in the presence of added salt (KBr) is discussed in light of electrostatic and hydrophobic forces operating in the solution, which are always responsible for growth processes.     

Preparation of carbon supported Pd–Pb hollow nanospheres and their electrocatalytic activities for formic acid oxidation

Pd–Pb hollow nanospheres dispersed on carbon black were developed by a galvanic replacement reaction between sacrificial cobalt nanoparticles and Pd²⁺, Pb²⁺ ions. The as-prepared catalysts were characterized by transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD). The electrochemical measurements show that the as-prepared catalysts have excellent catalytic activity for formic acid electrooxidation, which is attributed to the large surface area caused by the hollow structure and the lead doping effect which might modify the electronic structure of the catalysts.     

Generation and detection of single metal nanoparticles using scanning electrochemical microscopy techniques

Different pathways towards the generation and detection of a single metal nanoparticle (MNP) on a conductive carbon support for testing as an electrocatalyst are described. Various approaches were investigated including interparticle distance enhancement, electrochemical and mechanical tip-substrate MNP transfer onto macroscopic surfaces, scanning electrochemical microscopy (SECM)-controlled electrodeposition, and the use of selective binding monolayers on carbon fiber electrodes (CFEs) for solution-phase-selective adsorption. A novel SECM technique for electrodepositing MNPs on CFE tips immersed 100-200 nm below the electrolyte level was developed and used to generate single Pt and Ni nanoparticles. Following their generation, we demonstrate electrocatalytic detection of Fe3+ on individual Pt particles with the CFE in a Fe3+/H2SO4 solution. We also describe an approach of attaching MNPs to CFEs by controlling the composition of monolayers bonded to the CFE. By employing a monolayer with a low ratio of binding (e.g., 4-aminopyridine) to nonbinding molecules (e.g., aniline) and controlling the position of the CFE in a colloidal Pt solution with a SECM, we attached a single 15 nm radius Pt nanoparticle to the CFE. Such chemisorbed Pt particles exhibited a stronger adhesion on surface-modified CFEs and better mechanical stability during proton reduction than MNPs electrodeposited directly on the CFE.     

A general method for the rapid synthesis of hollow metallic or bimetallic nanoelectrocatalysts with urchinlike morphology

We have reported a facile and general method for the rapid synthesis of hollow nanostructures with urchinlike morphology. In-situ produced Ag nanoparticles can be used as sacrificial templates to rapidly synthesize diverse hollow urchinlike metallic or bimetallic (such as Au/Pt) nanostructures. It has been found that heating the solution at 100 degrees C during the galvanic replacement is very necessary for obtaining urchinlike nanostructures. Through changing the molar ratios of Ag to Pt, the wall thickness of hollow nanospheres can be easily controlled; through changing the diameter of Ag nanoparticles, the size of cavity of hollow nanospheres can be facilely controlled; through changing the morphologies of Ag nanostructures from nanoparticle to nanowire, hollow Pt nanotubes can be easily designed. This one-pot approach can be extended to synthesize other hollow nanospheres such as Pd, Pd/Pt, Au/Pd, and Au/Pt. The features of this technique are that it is facile, quick, economical, and versatile. Most importantly, the hollow bimetallic nanospheres (Au/Pt and Pd/Pt) obtained here exhibit an area of greater electrochemical activity than other Pt hollow or solid nanospheres. In addition, the approximately 6 nm hollow urchinlike Pt nanospheres can achieve a potential of up to 0.57 V for oxygen reduction, which is about 200 mV more positive than that obtained by using a approximately 6 nm Pt nanoparticle modified glassy carbon (GC) electrode. Rotating ring-disk electrode (RRDE) voltammetry demonstrates that approximately 6 nm hollow Pt nanospheres can catalyze an almost four-electron reduction of O(2) to H(2)O in air-saturated H(2)SO(4) (0.5 M). Finally, compared to the approximately 6 nm Pt nanoparticle catalyst, the approximately 6 nm hollow urchinlike Pt nanosphere catalyst exhibits a superior electrocatalytic activity toward the methanol oxidation reaction at the same Pt loadings.     

Reduced Graphene Oxide Impregnated Antimony Nanoparticle Sensor for Electroanalysis of Platinum Group Metals

A very sensitive electrochemical sensor based on a reduced graphene oxide film impregnated with antimony nanoparticles was prepared and applied to the electroanalysis of platinum group metal ions of Pd(II), Pt(II) and Rh(III). The electrochemical behavior of platinum group metals at the modified electrode was studied by adsorptive differential pulse cathodic stripping voltammetry in the presence of dimethylglyoxime as chelating agent. Several operational parameters were optimised to enhance the electroanalytical performance of the modified glassy carbon electrode sensor. The results showed sharp stripping peaks and a relatively constant peak potential with a good linear behaviour in the examined concentration range from 40 to 400 pg L^?1 for all metal ions investigated. The detection limit was found to be 0.45, 0.49 and 0.49 pg L^?1 (S/N=3) for Pd(II), Pt(II) and Rh(III), respectively. The developed electrochemical sensor also exhibited good precision with a relative standard deviation of 4.2 %, 2.55 % and 2.67 % for 5 successive measurements for Pd(II), Pt(II) and Rh(III), respectively. The proposed nanostructure showed good sensitivity and stability, which has promising potential applications in electrochemical sensors.     

Low-coordination sites in oxygen-reduction electrocatalysis: their roles and methods for removal

Low-coordination sites, including edges, kinks, and defects, play an important role in oxygen-reduction electrocatalysis. Their role was studied experimentally and theoretically for various Pt surfaces. However, the roughness effect on similar-sized nanoparticles that could elucidate the role of low-coordination sites has attracted much less attention, with no studies on Pd nanoparticles. Here, using Br- adsorption/desorption, we introduce an effective approach to reduce surface roughness, yielding Pd nanoparticles with smoother surfaces and an increased number of (111)-oriented facets. The resulting nanoparticles have a slightly contracted structure and narrow size distribution. Pt monolayer catalysts that contain such nanoparticles as the cores showed a 1.5-fold enhancement in specific and Pt mass activities for the oxygen reduction reaction compared with untreated ones. Furthermore, a dramatic increase in durability was observed with bromide-treated Pd(3)Co cores. These results demonstrate a simple approach to preparing nanoparticles with smooth surfaces and confirm the adverse effect of low-coordination sites on the kinetics of the oxygen-reduction reaction.     

Platinum monolayer on nonnoble metal-noble metal core-shell nanoparticle electrocatalysts for O2 reduction

We synthesized a new class of O2 electrocatalysts with a high activity and very low noble metal content. They consist of Pt monolayers deposited on the surfaces of carbon-supported nonnoble metal-noble metal core-shell nanoparticles. These core-shell nanoparticles were formed by segregating the atoms of the noble metal on to the nanoparticles' surfaces at elevated temperatures. A Pt monolayer was deposited by galvanic displacement of a Cu monolayer deposited at underpotentials. The mass activity of all the three Pt monolayer electrocatalysts investigated, viz., Pt/Au/Ni, Pt/Pd/Co, and Pt/Pt/Co, is more than order of magnitude higher than that of a state-of-the-art commercial Pt/C electrocatalyst. Geometric effects in the Pt monolayer and the effects of PtOH coverage, revealed by electrochemical data, X-ray diffraction, and X-ray absorption spectroscopy data, appear to be the source of the enhanced catalytic activity. Our results demonstrated that high-activity electrocatalysts can be devised that contain only a fractional amount of Pt and a very small amount of another noble metal.     

Pt‐Pd Bimetallic Nanoparticles Decorated Nanoporous Graphene as a Catalytic Amplification Platform for Electrochemical Detection of Xanthine

The nanoporous graphene papers (NGPs) was prepared by the hard‐template method. The Pt−Pd modified NGPs hybrid was prepared by the self‐assembly method. Then a glassy carbon electrode (GCE) modified with Pt−Pd bimetallic nanoparticles‐functionalized nanoporous graphene composite has been prepared for the electrochemical determination of Xanthine (XA). The Pt−Pd/NGPs hybrid was characterized by transmission electron microscopy, scanning electron microscope and X‐ray diffraction. The electrochemical behavior of XA on Pt−Pd/NGPs/GCE was investigated by cyclic voltammetry and amperometric i‐t. The Pt−Pd/NGPs modified electrode exhibited remarkably electrocatalytic activity towards the oxidation reaction of XA in phosphate buffer solution (pH=5.5). Under the optimal conditions, the determination of XA was accomplished by using amperometric i‐t, the linear response range from 1.0×10⁻⁵∼1.2×10⁻⁴ M. The detection limit was 3.0×10⁻⁶ M (S/N=3). The proposed modified electrode showed good sensitivity, selectivity, and stability with applied to determine XA in human urine.     

Monodisperse,submicrometer-scale platinum colloidal spheres with high electrocatalytic activity

Monodisperse, submicrometer-scale platinum (Pt) colloidal spheres were prepared through a simple direct chemical reduction of p-phenylenediamine (PPD)-chloroplatinic acid (H₂PtCl₆) coordination polymer colloids. It was found that the prepared Pt colloids had the similar size and morphology with their coordination polymer precursors, and the prepared Pt colloids with rough surfaces were three-dimensional (3D) structured assemblies of high-density small Pt nanoparticles. The electrochemical experiments confirmed that the prepared Pt colloids possessed a high electrocatalytic activity towards mainly four-electron reduction of dioxygen to water, making the prepared Pt colloids potential candidates for the efficient cathode material in fuel cells.     

Polyoxometalate-stabilized Pt nanoparticles and their electrocatalytic activities

The synthesis of long-term stable polyoxometalate (POM)-stabilized Pt nanoparticles (NPs) is described here. By means of controlled bulk electrolysis, the reduced POM anions, SiW(12)O(40)(4-) (or SiW(12)) and H(2)W(12)O(40)(6-) (or H(2)W(12)), respectively, served the dual role of reductant and protecting/stabilizing ligand for the Pt NPs. Transmission electron microscopy (TEM) images confirmed the formation of 3 to 4 nm sized Pt NPs, which coincidently was in the same size range of the commercial Pt black that was used as a reference. Elemental XPS analyses showed W/Pt ratios of 0.12 for the SiW(12)- and 0.18 for the H(2)W(12)-stabilized Pt NPs, but found no evidence of the presence of Cl(-) anion in the samples. Controlled electrochemical (EC), UV-Vis, and IR data provided unambiguous evidence for the structural integrity of the POM anions on the Pt NP surface. CO stripping, methanol oxidation reaction (MOR), and oxygen reduction reaction (ORR) were used to assess their electrocatalytic activities. It was found that both SiW(12)- and H(2)W(12)-stabilized Pt NPs showed enhanced activities in MOR and ORR as compared to that of Pt black, with the latter having higher enhancement. These observations clearly demonstrated that the stabilizing POM anions have a profound influence on the electrocatalytic activity of the underlying Pt NPs.     

HypoGel负载Pd纳米催化剂制备与表征及温和条件下催化Suzuki反应(英文)

A new heterogeneous catalyst composed of Pd nanoparticles immobilized within a HypoG el resin has been prepared in the absence of any ligands using an extensive cross-linking method.This newly developed nanocatalyst was characterized by N_2 adsorption-desorption,X-ray diffraction(XRD),transmission electron microscopy(TEM),scanning electron microscopy(SEM),energy dispersive X-ray(EDX),Fourier transform infrared spectroscopy and inductively coupled plasma-mass spectrometer(ICP-MS)techniques.TEM and XRD results revealed that the Pd nanoparticles were well dispersed with diameters in the range of 4–12 nm,and an average size of about 8 nm.The cross-linked Pd catalyst demonstrated excellent catalytic activity towards the synthesis of a series of biaryl compounds by the reaction of various aryl halides(e.g.,bromides andiodides)with phenylboronic acid in the presence of tetrabutylammonium bromide.ICP-MS analysis indicated that there was only 0.25%weight loss of Pd(0.55±0.02 ppm)from the supported catalyst after the first cycle reaction.Furthermore,the catalyst showed excellent reusability(up to five uses)with consistently high levels of catalytic activity following its recovery by filtration.     

Copper Oxide Nanoparticles: Synthesis,Characterization and Their Antibacterial Activity

Copper oxide nanoparticles were prepared by electrochemical reduction method using tetra butyl ammonium bromide (TBAB) as structure directing agent in an organic medium viz. tetra hydro furan (THF) and acetonitrile (ACN) in 4:1 ratio by optimizing current density and molar concentration of the ligand. The reduction process takes place under inert atmosphere of nitrogen over a period of 2 h. Such nanoparticles are prepared using simple electrolysis cell in which the sacrificial anode as a commercially available copper metal sheet and platinum (inert) sheet act as a cathode. The parameters such as current density, solvent polarity, distance between electrodes, and concentration of stabilizers are used to control the size of nanoparticles. The synthesized copper oxide nanoparticles were characterized by using UV–Visible, FT-IR, XRD, SEM–EDS and TEM analysis techniques. The nanoparticles were tested for antibacterial activity against human pathogens like Escherichia coli (E. coli) and Staphylococcus strains and which was proved to be excellent.     

纳米碳纤维载铂作为质子交换膜燃料电池阳极催化剂

采用化学还原法合成了微结构不同的纳米碳纤维(板式、鱼骨式、管式)载铂催化剂(分别记为Pt/p-CNF、Pt/f-CNF、Pt/t-CNF). 通过高分辨透射电镜(HRTEM)和X射线衍射(XRD)等分析技术对催化剂的微观结构进行了表征, 并利用循环伏安(CV)法分析了催化剂的电化学比表面积(ESA). 在此基础上, 制备了膜电极(MEA), 通过单电池测试了催化剂的电催化性能. 结果表明: 铂纳米粒子在不同的纳米碳载体上表现出不同的粒径, 在板式、鱼骨式和管式纳米碳纤维上的铂纳米粒子平均粒径分别为2.4、2.7和2.8 nm. 板式纳米碳纤维载铂催化剂作单电池阳极时表现出良好的电催化性能, 其对应的最高功率密度可达0.569 W·cm^-2, 高于鱼骨式纳米碳纤维载铂催化剂和管式纳米碳纤维载铂催化剂对应的最高功率密度(分别为0.550和0.496 W·cm^-2). 同时, 也制备了碳黑(Pt/XC-72)载铂催化剂. 相比于Pt/XC-72, 纳米碳纤维载体上的铂纳米颗粒有较小的粒径、较好的分散和较高的催化活性, 说明纳米碳纤维是质子交换膜燃料电池(PEMFCs)催化剂的良好载体.     

氯化胆碱离子液体中纳米银的电化学制备与表征

在氯化胆碱离子液体中,采用牺牲阳极法直接从金属银制备了纳米银微粒;利用X射线衍射仪、透射电子显微镜、傅立叶红外光谱和热分析仪对样品进行了分析表征.结果表明:所制备的银纳米微粒大致呈球形,具有面心立方结构,粒径约为60nm.作为溶剂的离子液体同时具有分散剂和稳定剂的功能,可防止银纳米微粒之间的团聚及表面氧化.     

甲醇在Pd基电催化剂上的氧化

以多壁碳纳米管(MWCNT)和碳黑为载体, 用交替微波加热的方法制备了担载型Pd电催化剂, 并表征了其微观形貌和电化学性能. 透射电镜(TEM)和X射线衍射(XRD)结果显示, Pd在MWCNT载体上有较好的分散度, 平均粒径为4 nm. 循环伏安、计时电位和交流阻抗的测试结果表明, 在碱性溶液中, Pd/MWCNT显示出良好的甲醇氧化性能. 在Pd/MWCNT催化剂上, 甲醇氧化的起始电位比在Pt/C上负移100 mV 左右. Pd/MWCNT高的催化活性不仅与它的高的活性表面积有关, 而且和Pd与载体MWCNT之间的协同作用有关.     

Kinetic and mechanistic study on the reactions of [Pt(bpma)(H2O)]2+ and [Pd(bpma)(H2O)]2+ with some nucleophiles. Crystal structure of [Pd(bpma)(py)](ClO4)2

Substitution reactions of the complexes [Pd(bpma)(H2O)]2+ and [Pt(bpma)(H2O)]2+, where bpma = bis(2-pyridylmethyl)amine, with TU, DMTU and TMTU for both complexes and Cl-, Br-, I- and SCN- for the platinum complex, were studied in aqueous 0.10 M NaClO4 at pH 2.5 using a variable-temperature stopped-flow spectrophotometer. The pKa value for the coordinated water molecule in [Pd(bpma)(H2O)]2+ (6.67) is a unit higher than that of [Pt(bpma)(H2O)]2+. The observed pseudo-first-order rate constants k(obs) (s(-1)) obeyed the equation k(obs) = k2[Nu] (Nu = nucleophile). The second-order rate constants indicate that the Pd(II) complex is a factor of 10(3) more reactive than Pt(II) complex. The nucleophile reactivity attributed to the steric hindrance in case of TMTU and the inductive effect for DMTU was found to be DMTU > TU > TMTU for [Pt(bpma)(H2O)]2+ and DMTU approximately TU > TMTU for [Pd(bpma)(H2O)]2+. The trend for ionic nucleophile was I- > SCN- > Br- > Cl-, an order linked to their polarizability and the softness or hardness of the metal. Activation parameters were determined for all reactions and the negative entropies of activation (Delta S++) support an associative ligand substitution mechanism. The X-ray crystal structure of [Pd(bpma)(py)](ClO4)2 was determined; it belongs to the triclinic space group P1 and has one formula unit in the unit cell. The unit cell dimensions are a = 8.522(2), b = 8.627(2), c = 16.730(4) A; alpha = 89.20(2), beta = 81.03(2), gamma = 60.61(2) degrees ; V = 1055.7(5) A3. The structure was solved using direct methods in WinGX's implementation of SHELXS-97 and refined to R = 0.054. The coordination geometry of [Pd(bpma)(py)]2+ is distorted square-planar. The Pd-N(central) bond distance, 1.996(3) A, is shorter than the other two Pd-N distances, 2.017(3) and 2.019(3) A. The Pd-N(pyridine) distance is 2.037(3) A.     

Synthesis of Au, Au/Ag, Au/Pt and Au/Pd nanoparticles using the microwave-polyol method

Gold, Au/Ag, Au/Pt and Au/Pd bimetallic nanoparticles with varying mol fractions were synthesized in ethylene glycol and glycerol, using the microwave technique in the presence of a stabilizer poly(N-vinylpyrrolidone) (PVP). It was found that bimetallic colloids of Au/Ag, Au/Pd and Au/Pt form an alloy either on co-reduction of respective metal ions or on mixing individual sols.     

Performance study of palladium modified platinum anode in direct ethanol fuel cells: A green power source

The direct ethanol fuel cell is a green and renewable power source alternative to fossil fuels and produces less emissions compared to a combustion engine. Ethanol can be generated in great quantity from renewable resources like biomass through a fermentation process. Bio-generated ethanol is thus attractive fuel since growing crops for biofuels absorbs much of the carbon dioxide emitted into the atmosphere from the oxidation of ethanol. The platinum and palladium were co-deposited on graphite substrate by the galvanostatic technique and employed as anode catalyst for ethanol electrooxidation. The information on surface morphology, structural characteristics and bulk composition of the catalyst was obtained using scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive X-ray (EDX) spectroscopy. The cyclic voltammetry (CV) were used for the estimation of the electrochemically active surface area (ECSA) of the synthesized catalysts in alkaline medium. The CVs for ethanol oxidation revealed superior catalytic activity of Pt–Pd/C compared to Pd/C and Pt/C. The effect of OH^? on ethanol oxidation at Pt–Pd/C catalyst was studied using cyclic voltammetry, quasisteady-state polarization, chronoamperometry, and electrochemical impedance spectroscopy (EIS). The Pt–Pd/C catalyst shows good stability and enhanced electrocatalytic activity is ascribed to the synergistic effect of higher electrochemical surface area, preferred OH^? adsorption on the surface and palladium ad-atom contribution on the alloyed surface.