Synthesis of bicyclo[4.n.1]alkanones

Cyclic beta-keto ester monoanions react with 1,4-dihalobutenes to give C-alkylated products which subsequently undergo a stereoselective SN2' O-alkylation reaction to yield functionalized enol ethers. When the starting material was ethyl cyclopentanone carboxylate, the C-alkylated product, treated with a base, directly afforded the functionalized bicyclo[4.2.1]nonanone. The enol ethers were submitted to a flash vacuum thermolysis (FVT) reaction to readily afford functionalized bicyclo[4.n.1]alkanones (n = 3, 4). This reaction sequence was applied to the synthesis of a functionalized tricyclo[7.4.1.0(1,5)]tetradecanone, which represents an analogue to the tricyclic core of ingenol.     

Photochemical,thermal, and base-induced access to hydroazulene derivatives via two-carbon ring-enlargement reactions of condensed electrophilic cyclobutenes

Enamines, silyl enol ethers, and beta-keto ester anions derived from bicyclo[3.3.0]octan-2-one efficiently underwent a formal [2 + 2] cycloaddition reaction with DMAD and ethyl propynoate leading to a large variety of electrophilic cyclobutenes. The latter were transformed into polyfunctionalized bicyclo[5.3.0]decane (or hydroazulene) ring systems in high yields by fragmentation of the cyclobutene moiety. These two-carbon ring-enlargement reactions were utilized as a synthetic tool for the construction of a polyfunctionalized hydroazulene derivative that represents a potential precursor of the tricyclic framework of ingenol.     

Synthetic Studies on and Mechanistic Insight into [W(CO)5(L)]‐Catalyzed Stereoselective Construction of Functionalized Bicyclo[5.3.0]decane Frameworks

Stereoselective preparation of a variety of synthetically useful functionalized bicyclo[5.3.0]decane derivatives was achieved by tandem cyclization of 3‐siloxy‐1,3,9‐triene‐7‐yne derivatives based on the electrophilic activation of alkynes catalyzed by [W(CO)₅(L)]. The reaction proceeded smoothly under photoirradiation, and various substrates were cyclized to give the corresponding bicyclic compounds with up to four chiral centers stereospecifically. Reactions of siloxydienes with a silyl substituent as an equivalent of a hydroxyl group also proceeded with wide generality to afford silyl‐substituted bicyclo[5.3.0]decanes, which were highly useful as synthetic intermediates. Stereochemical studies concerning the silyl enol ether moiety suggested that two types of reaction pathway for the formation of seven‐membered rings were present. The reaction of (Z)‐enol silyl ethers proceeded through Cope rearrangement of cis‐divinylcyclopropane intermediates, and that of (E)‐enol silyl ethers by 1,4‐addition of the dienyl tungsten species at the position δ to the metal atom. In the reactions of siloxydiene derivatives with silyl substituents, all possible diastereomers could be synthesized stereoselectively by changing the geometry of the silyl enol ether and enyne moieties.     

Synthesis of spiro[5.4]decenones and their transformation into bicyclo[4.4]deca-1,4-dien-3-ones by domino "elimination- double-Wagner-Meerwein-rearrangement" reactions

The [3+3] cyclization of 1,3-bis-silyl enol ethers with 1,1-diacylcyclopentanes allows a convenient synthesis of spiro[5.4]decenones. Treatment of these compounds with trifluoroacetic acid (TFA) afforded a great variety of bicyclo[4.4.0]deca-1,4-dien-3-ones containing an angular alkyl group. This core structure occurs in a number of pharmacologically relevant natural products.     

Synthesis of 3,4-benzo-7-hydroxy-2,9-diazabicyclo[3.3.1]non-7-enes by cyclization of 1,3-bis(silyl enol ethers) with quinazolines

A variety of functionalized 3,4-benzo-7-hydroxy-2,9-diazabicyclo[3.3.1]non-7-enes were prepared by one-pot cyclizations of 1,3-bis(silyl enol ethers) with quinazolines. The mechanism of the cyclization was studied by B3LYP/6-31G(d) density functional theory computations. The products could be functionalized by Suzuki cross-coupling reactions. The reaction of 1,3-bis(silyl enol ethers) with phthalazine afforded open-chain rather than cyclization products.     

Domino reactions of 1,3-bis-silyl enol ethers with benzopyrylium triflates: efficient synthesis of fluorescent 6H-benzo[c]chromen-6-ones, dibenzo[c,d]chromen-6-ones, and 2,3-dihydro-1H-4,6-dioxachrysen-5-ones

The condensation of 1,3-bis-silyl enol ethers with benzopyrylium triflates, generated in situ by the reaction of chromones with Me3SiOTf, afforded functionalized 2,3-dihydrobenzopyrans; treatment of the latter with NEt3 or BBr3 resulted in a domino retro-Michael-aldol-lactonization reaction and the formation of a variety of 7-hydroxy-6H-benzo[c]chromen-6-ones. The hydroxy group was functionalized by using Suzuki cross-coupling reactions. The methodology reported was applied to the synthesis of the natural product autumnariol and a new fluorescence dye, which exhibits promising optical properties. 2,3-Dihydro-1H-4,6-dioxachrysen-5-ones were prepared by condensation of chromones with 1,3-bis-silyl enol ethers containing a remote chloride group, domino retro-Michael-aldol-lactonization, and an intramolecular Williamson reaction.     

Simple construction of bicyclo[4.3.0]nonane,bicyclo[3.3.0]octane,and related benzo derivatives by palladium-catalyzed cycloalkenylation

[reaction: see text] Bicyclo[4.3.0]nonanes (hydrindanes) and bicyclo[3.3.0]octanes (octahydropentalenes) are easily synthesized by palladium-catalyzed cycloalkenylations. Additionally, benzo-fused bicyclo[3.3.0]octanes are prepared for the first time through intramolecular coupling between silyl enol ethers and aromatic rings in the presence of catalytic palladium acetate.     

Synthesis of dibenzo[b,d]pyran-6-ones based on [3 + 3] cyclizations of 1,3-bis(silyl enol ethers) with 3-silyloxy-2-en-1-ones

Functionalized dibenzo[b,d]pyran-6-ones were prepared by formal [3 + 3] cyclization of 1,3-bis(silyl enol ethers) with 3-silyloxy-2-en-1-ones or 1,1-diacetylcyclopropane to give functionalized salicylates, Suzuki cross-coupling reactions of the corresponding triflates, and subsequent BBr3-mediated lactonization. A second approach to dibenzo[b,d]pyran-6-ones relies on the [3 + 3] cyclization of 1,3-bis(silyl enol ethers) with 1-(2-methoxyphenyl)-1-(trimethylsilyloxy)alk-1-en-3-ones and subsequent BBr3-mediated lactonization.     

Convenient Synthesis of N-Benzyl-1,4-dihydropyridines, Cyclohexenones, and Bicyclo[3.3.1]nonan-3-one Derivatives from 1-Aza-1,3-butadienes

Readily available 1-aza-1,3-butadienes (enimines) react with methyl acetoacetate and acetylacetone in the presence of catalytic amounts of lithium iodide to form in high yields unsymmetrically substituted 1,4-dihydropyridines or cyclohexenones. The reaction pathway depends on the structure of the enimine used. This divergence was not observed when the enimines were reacted with dimethyl 1,3-acetonedicarboxylate to provide bicyclo[3.3.1]nonane-3-one derivatives in excellent yields in a remarkably stereoselective reaction.     

Synthesis of trifluoromethyl-substituted salicylates by cyclocondensation of 1,3-bis(silyloxy)-1,3-butadienes with 4,4-dimethylthio-1,1,1-trifluorobut-3-en-2-one

A formal [3+3] cyclocondensation of 1,3-bis(silyl enol ethers) with the little-known 4,4-dimethylthio-1,1,1-trifluorobut-3-en-2-one was studied. In contrast to 4,4-dimethoxy-1,1,1-trifluorobut-3-en-2-one, this α-oxoketene dithioacetal reacts with 1,3-bis(trimethylsilyloxy)-1,3-butadienes in the presence of TiCl₄ to give mainly 6-methylthio-4-(trifluoromethyl)salicylates via 1,2-addition. The scope and limitations of the reaction are discussed.     

Pyridazines. LXX. Reactions of azidoazolopyridazines with unsaturated compounds

Cycloaddition reactions of azidoazolopyridazines with unsaturated esters, cyclic enol ethers, styrene, 2-vinyl-pyridine, bicyclo[2.2.1]heptene, dicyclopentadiene and dehydrobenzene were investigated. The reaction proceed via the intermediate Δ² -1,2,3-triazolines which were in most cases termolabile and decomposed further to give the final products which were enamines, imines of fused aziridines.     

Transition Metal Cation Salts in Organic Synthesis

Reaction of lithium diisopropylamide (LDA) with (η⁴-1,3-cyclohexadiene)Fe(CO)₃ complexes bearing functionalized side chains at C-5, under an atmosphere of carbon monoxide, gives bridged bicyclo[3,2,1]octene and bicyclo[3,3,1]nonene systems after electrophilic quenching. Under the same reaction conditions, intramolecular cyclization of acyclic (η⁴- 1,3-butadiene)Fe(CO)₃ complexes with functionalized side chains at the terminal position of the diene ligands furnishes fused bicyclo[3.3,0]octanone and bicyclo[4.3.0]nonanone derivatives after acid quenching. The addition of a variety of the highly functionalized zinc-copper reagents RCu(CN)ZnI to the (η⁷-cycloheptatrienyl)Cr(CO) gives (η⁶-cyclohepta-1,3,5-triene)Cr(CO)₃ complexes with a functionalized side-chain at the C-7 position of the ring. Intramolecular cyclization of ester-subsbtuted adducts using lithium diisopropylamide generates fused bicyclo[5.3.0]decane and bicyclo[5.4.0]undecane derivatives. The addition of a variety of the highly functionalized zinc-copper reagents RCu(CN)Znl to the (η⁴-cyclohexa-1,3-diene)Mo(CO)₂(Cp) at the terminus of the coordinated diene ligand gives [Mo(π-allyl)(CO)₂(Cp)](Cp = cyclopentadienyl) complexes with the functionalized side-chain at the C-4 position of the ring. Intramolecular cyclization of the (π-allyl)molybdenum complex containing a pendant propanoic acid unit generates the δ-lactone derivative.     

Radical cascade reaction with 1,4-dienes and 1,4-enynes using 2-(iodomethyl)cyclopropane-1,1-dicarboxylate as a homoallyl radical precursor: one-step synthesis of bicyclo[3.3.0]octane derivatives

[reaction: see text] Radical cascade reaction with various 1,4-dienes and 1,4-enynes using dimethyl 2-(iodomethyl)cyclopropane-1,1-dicarboxylate as a homoallyl radical precursor smoothly proceeds through an iodine atom transfer mechanism to give functionalized bicyclo[3.3.0]octane derivatives in good yields.     

Constructing conformationally constrained macrobicyclic musks

To investigate the structure-odor correlation of musks, (12R)-12-methyl-13-tridecanolide (1), a macrocyclic musk, and 13-tridecanolide, its non-musky demethyl analogue, were conformationally constrained by introduction of methylene bridges between C-3 and C-8 or C-9. These [7.5.1]- and [8.4.1]-macrobicycles were synthesized starting from bicyclo[5.3.1]undec-8-en-9-one (3) and bicyclo[4.3.1]dec-7-en-8-one (8), respectively, by a sequence consisting of catalytic hydrogenation, alpha-alkylation with a TBS-protected (tert-butyldimethylsilyl) hydroxy halide, acid-catalyzed cyclization, oxidative cleavage of the formed enol ether double bond, and subsequent reduction of the carbonyl group via its tosylhydrazone. The compound (1R,6R,9R)-(+)-6-methyl-4-oxa-bicyclo[7.5.1]pentadecan-3-one (22) was found to possess the most pronounced musk odor, and this was rationalized by a superposition analysis with the polycyclic aromatic musk odorant (4S,7R)-Galaxolide (2). In its (1S,6R,9S)-(+)-stereoisomer 23 as well as in (1S,6R, 10R)-(+)-6-methyl-4-oxabicyclo[8.4.1]-pentadecan-3-one (18) the (6R)-methyl group seems to hinder the interaction with the musk receptor, while the demethyl compounds 7 and 12 showed only very faint odors.     

Synthesis of 6-alkylidene-2,3-benzo-1,4-diaza-7-oxabicyclo[4.3.0]non-2-enes by cyclization of 1,3-bis(silyl enol ethers) with quinoxalines

6-Alkylidene-2,3-benzo-1,4-diaza-7-oxabicyclo[4.3.0]non-2-enes were prepared by cyclization of 1,3-bis(silyl enol ethers) with quinoxaline.     

Synthesis of functionalized acetophenones by [3 + 3] cyclizations of 1,3-bis-silyl enol ethers with 2-acetyl-3-silyloxyalk-2-en-1-ones

The TiCl₄ mediated cyclization of 1,3-bis-silyl enol ethers with 2-acetyl-1-silyloxybut-1-en-3-one and 3-acetyl-4-silyloxypent-3-en-2-one, readily prepared from 3-formyl(acetylacetone) and triacetylmethane, afforded a variety of functionalized acetophenones.     

A bicyclo[3.2.0]hept-3-en-6-one approach to prostaglandin intermediates

[reaction:see text] The substituted cyclopentanic structures, 6-benzyloxymethyl-7-hydroxy-2-oxabicyclo [3.3.0]octan-3-one (1), a Corey lactone derivative, and 6-exo-benzyloxymethyl-2-oxabicyclo[3.3. 0]oct-7-en-3-one (2), have been obtained stereoselectively through the bicyclo[3.2.0]hept-3-en-6-one approach via 5-benzyloxymethyl-3-hydroxy-6-heptenoic acid, easily accessible from the inexpensive monoprotected cis-2-butene-1,4-diol.     

Synthesis of 7-hydroxy-6H-benzo[c]chromen-6-ones based on a ‘[3+3] cyclization/domino retro-Michael-aldol-lactonization’ strategy

The TiCl₄-mediated [3+3] cyclization of 2,4-bis(trimethylsilyloxy)penta-1,3-diene with 3-silyloxyalk-2-en-1-ones afforded 2-acetylphenols, which were transformed into functionalized chromones. The Me₃SiOTf-mediated condensation of the latter with 1,3-bis(silyl enol ethers) and subsequent domino ‘retro-Michael-aldol-lactonization’ reaction afforded 7-hydroxy-6H-benzo[c]chromen-6-ones.     

Synthesis of functionalized 4-chlorophenols and 1,4-dihydroquinones by [3+3] cyclization of 1,3-bis-silyl enol ethers with 2-chloro- and 2-acyloxy-3-(silyloxy)alk-2-en-1-ones

Functionalized 4-chlorophenols and 1,4-dihydroquinones were prepared by [3+3] cyclization of 1,3-bis-silyl enol ethers with 2-chloro- and 2-acyloxy-3-(silyloxy)alk-2-en-1-ones.     

Bicyclo[3.3.1]nonane and its derivatives—IV : Reactions of some carbonyl derivatives of bicyclo[3.3.1]nonane with diazomethane

The reaction of bicyclo[3.3.1]nonane-2,6-dione with diazomethane in situ does not lead to the homologous bicyclo[4.3.1]decane-2,7-dione, but mainly to tricyclo[4.4.0.0^2,9]decan-9-ol-5-one. The structure of the latter was confirmed by the proton NMR spectra measured with an addition of Eu(DPM)₃, A mixture of tricyclo[4,4.0.0^2,9]decan-9-ol-5-one and bicyclo[4.3.1]decane-2,7-dione results when solutions of diazomethane are used. The reaction of bicyclo[3.3.1]nonane-2,6-dione monoethyleneacetal with diazomethane in situ yields predominantly bicyclo[4.3.1]decane-2,7-dione. Under the same conditions bicyclo[3.3.1]nonan-2-one gives with diazomethane in situ only bicyclo[4.3.1]decan-2-one.