EPR, 1H and 2H NMR, and reactivity studies of the iron-oxygen intermediates in bioinspired catalyst systems

Complexes [(BPMEN)Fe(II)(CH(3)CN)(2)](ClO(4))(2) (1, BPMEN = N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)-1,2-diaminoethane) and [(TPA)Fe(II)(CH(3)CN)(2)](ClO(4))(2) (2, TPA = tris(2-pyridylmethyl)amine) are among the best nonheme iron-based catalysts for bioinspired oxidation of hydrocarbons. Using EPR and (1)H and (2)H NMR spectroscopy, the iron-oxygen intermediates formed in the catalyst systems 1,2/H(2)O(2); 1,2/H(2)O(2)/CH(3)COOH; 1,2/CH(3)CO(3)H; 1,2/m-CPBA; 1,2/PhIO; 1,2/(t)BuOOH; and 1,2/(t)BuOOH/CH(3)COOH have been studied (m-CPBA is m-chloroperbenzoic acid). The following intermediates have been observed: [(L)Fe(III)(OOR)(S)](2+), [(L)Fe(IV)═O(S)](2+) (L = BPMEN or TPA, R = H or (t)Bu, S = CH(3)CN or H(2)O), and the iron-oxygen species 1c (L = BPMEN) and 2c (L = TPA). It has been shown that 1c and 2c directly react with cyclohexene to yield cyclohexene oxide, whereas [(L)Fe(IV)═O(S)](2+) react with cyclohexene to yield mainly products of allylic oxidation. [(L)Fe(III)(OOR)(S)](2+) are inert in this reaction. The analysis of EPR and reactivity data shows that only those catalyst systems which display EPR spectra of 1c and 2c are able to selectively epoxidize cyclohexene, thus bearing strong evidence in favor of the key role of 1c and 2c in selective epoxidation. 1c and 2c were tentatively assigned to the oxoiron(V) intermediates.     

The nature of active species in catalytic systems based on non-heme iron complexes, hydrogen peroxide, and acetic acid for selective olefin epoxidation

The catalytic systems [(BPMEN)Fe^II(CH₃CN)₂](ClO₄)₂/H₂O₂/CH₃OOH and [(TPA)Fe^II(CH₃CN)₂](ClO₄)₂/H₂O₂/CH₃OOH, where BPMEN = N,N′-dimethyl-N,N′-bis(2-pyridylmethyl)-1,2-diaminoethane and TPA = tris(2-pyridylmethyl)amine, provide selective olefin epoxidation. Proton NMR studies showed that the mononuclear iron(IV) oxo complexes [(L)Fe^IV=O]²⁺, with L = BPMEN or TPA, are present in the cited catalytic systems. These intermediates are the decomposition products of the acylperoxo complexes [(L)Fe^III-O₃CCH₃]²⁺. Such a complex was observed by the ²H NMR technique at low temperatures. The [(L)Fe^IV=O]²⁺ and [(L)Fe^V=O]³⁺ oxo complexes are possible active species in the studied catalytic systems.     

Olefin cis-dihydroxylation versus epoxidation by non-heme iron catalysts: two faces of an Fe(III)-OOH coin

The oxygenation of carbon-carbon double bonds by iron enzymes generally results in the formation of epoxides, except in the case of the Rieske dioxygenases, where cis-diols are produced. Herein we report a systematic study of olefin oxidations with H(2)O(2) catalyzed by a group of non-heme iron complexes, i.e., [Fe(II)(BPMEN)(CH(3)CN)(2)](2+) (1, BPMEN = N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)-1,2-diaminoethane) and [Fe(II)(TPA)(CH(3)CN)(2)](2+) (4, TPA = tris(2-pyridylmethyl)amine) and their 6- and 5-methyl-substituted derivatives. We demonstrate that olefin epoxidation and cis-dihydroxylation are different facets of the reactivity of a common Fe(III)-OOH intermediate, whose spin state can be modulated by the electronic and steric properties of the ligand environment. Highly stereoselective epoxidation is favored by catalysts with no more than one 6-methyl substituent, which give rise to low-spin Fe(III)-OOH species (category A). On the other hand, cis-dihydroxylation is favored by catalysts with more than one 6-methyl substituent, which afford high-spin Fe(III)-OOH species (category B). For catalysts in category A, both the epoxide and the cis-diol product incorporate (18)O from H(2)(18)O, results that implicate a cis-H(18)O-Fe(V)=O species derived from O-O bond heterolysis of a cis-H(2)(18)O-Fe(III)-OOH intermediate. In contrast, catalysts in category B incorporate both oxygen atoms from H(2)(18)O(2) into the dominant cis-diol product, via a putative Fe(III)-eta(2)-OOH species. Thus, a key feature of the catalysts in this family is the availability of two cis labile sites, required for peroxide activation. The olefin epoxidation and cis-dihydroxylation studies described here not only corroborate the mechanistic scheme derived from our earlier studies on alkane hydroxylation by this same family of catalysts (Chen, K.; Que, L, Jr. J. Am. Chem. Soc. 2001, 123, 6327) but also further enhance its credibility. Taken together, these reactions demonstrate the catalytic versatility of these complexes and provide a rationale for Nature's choice of ligand environments in biocatalysts that carry out olefin oxidations.     

Unexpected kinetic complexity in the formation of a nonheme oxoiron(IV) complex

The stoichiometric formation of [FeIV(O)(TPA)(NCMe)]2+ (TPA = tris(2-pyridylmethyl)amine) from the reaction of [FeII(TPA)(NCMe)2]2+ with 1 equiv. peracetic acid exhibits more kinetic complexity than might be expected from the simple stoichiometry. A multiple-pathway mechanism with an FeIV-peracetic acid species, [(TPA)FeIV(O)((H)O3CR)]2+/+, as the primary oxidant is proposed.     

High-valent nonheme iron. Two distinct iron(IV) species derived from a common iron(II) precursor

The reaction of [Fe(II)(beta-BPMCN)(OTf)2] (1, BPMCN = N,N'-bis(2-pyridylmethyl)-N,N'-dimethyl-trans-1,2-diaminocyclohexane) with tBuOOH at low-temperature yields alkylperoxoiron(III) intermediates 2 in CH2Cl2 and 2-NCMe in CH3CN. At -45 degrees C and above, 2-NCMe converts to a pale green species 3 (lambda(max) = 753 nm, epsilon = 280 M(-1) cm(-1)) in 90% yield, identified as [Fe(IV)(O)(BPMCN)(NCCH3)]2+ by comparison to other nonheme [Fe(IV)(O)(L)]2+ complexes. Below -55 degrees C in CH2Cl2, 2 decays instead to form deep turquoise 4 (lambda(max) = 656, 845 nm; epsilon = 4000, 3600 M(-1) cm(-1)), formulated to be an unprecedented alkylperoxoiron(IV) complex [Fe(IV)(BPMCN)(OH)(OOtBu)]2+ on the basis of M?ssbauer, EXAFS, resonance Raman, NMR, and mass spectral evidence. The reactivity of 1 with tBuOOH in the two solvents reveals an unexpectedly rich iron(IV) chemistry that can be supported by the BPMCN ligand.     

Ligand topology effects on olefin oxidations by bio-inspired [FeII(N2Py2)] catalysts

Linear tetradentate N2Py2 ligands can coordinate to an octahedral FeII center in three possible topologies (cis-alpha, cis-beta, and trans). While for the N,N'-bis(2-pyridylmethyl)-1,2-diaminoethane (bpmen) complex, only the cis-alpha topology has been observed, for N,N'-bis(2-pyridylmethyl)-1,2-diaminocyclohexane (bpmcn) both cis-alpha and cis-beta isomers have been reported. To date, no facile interconversion between cis-alpha and cis-beta topologies has been observed for ironII complexes even at high temperatures. However, this work provides evidence for facile interconversion in solution of cis-alpha, cis-beta, and trans topologies for [Fe(bpmpn)X2] (bpmpn=N,N'-bis(2-pyridylmethyl)-1,3-diaminopropane; X=triflate, CH3CN) complexes. As reported previously, the catalytic behavior of cis-alpha and cis-beta isomers of [Fe(bpmcn)(OTf)2] with respect to olefin oxidation depends dramatically on the geometry adopted by the iron complex. To establish a general pattern of the catalysis/topology dependence, this work presents an extended comparison of the catalytic behavior for oxidation of olefins of a family of [Fe(N2py2)] complexes that present different topologies. 18O labeling experiments provide evidence for a complex mechanistic landscape in which several pathways should be considered. Complexes with a trans topology catalyze only non-water-assisted epoxidation. In contrast, complexes with a cis-alpha topology, such as [Fe(bpmen)X2] and [Fe(alpha-bpmcn)(OTf)2], can catalyze both epoxidation and cis-dihydroxylation through a water-assisted mechanism. Surprisingly, [Fe(bpmpn)X2] and [Fe(beta-bpmcn)(OTf)2] catalyze epoxidation via a water-assisted pathway and cis-dihydroxylation via a non-water-assisted mechanism, a result that requires two independent and distinct oxidants.     

Biomimetic aryl hydroxylation derived from alkyl hydroperoxide at a nonheme iron center. Evidence for an Fe(IV)=O oxidant

Many nonheme iron-dependent enzymes activate dioxygen to catalyze hydroxylations of arene substrates. Key features of this chemistry have been developed from complexes of a family of tetradentate tripodal ligands obtained by modification of tris(2-pyridylmethyl)amine (TPA) with single alpha-arene substituents. These included the following: -C(6)H(5) (i.e., 6-PhTPA), L(1); -o-C(6)H(4)D, o-d(1)-L(1); -C(6)D(5), d(5)-L(1); -m-C(6)H(4)NO(2), L(2); -m-C(6)H(4)CF(3), L(3); -m-C(6)H(4)Cl, L(4); -m-C(6)H(4)CH(3), L(5); -m-C(6)H(4)OCH(3), L(6); -p-C(6)H(4)OCH(3), L(7). Additionally, the corresponding ligand with one alpha-phenyl and two alpha-methyl substituents (6,6-Me(2)-6-PhTPA, L(8)) was also synthesized. Complexes of the formulas [(L(1))Fe(II)(NCCH(3))(2)](ClO(4))(2), [(L(n)())Fe(II)(OTf)(2)] (n = 1-7, OTf = (-)O(3)SCF(3)), and [(L(8))Fe(II)(OTf)(2)](2) were obtained and characterized by (1)H NMR and UV-visible spectroscopies and by X-ray diffraction in the cases of [(L(1))Fe(II)(NCCH(3))(2)](ClO(4))(2), [(L(6))Fe(II)(OTf)(2)], and [(L(8))Fe(II)(OTf)(2)](2). The complexes react with tert-butyl hydroperoxide ((t)()BuOOH) in CH(3)CN solutions to give iron(III) complexes of ortho-hydroxylated ligands. The product complex derived from L(1) was identified as the solvated monomeric complex [(L(1)O(-))Fe(III)](2+) in equilibrium with its oxo-bridged dimer [(L(1)O(-))(2)Fe(III)(2)(mu(2)-O)](2+), which was characterized by X-ray crystallography as the BPh(4)(-) salt. The L(8) product was also an oxo-bridged dimer, [(L(8)O(-))(2)Fe(III)(2)(mu(2)-O)](2+). Transient intermediates were observed at low temperature by UV-visible spectroscopy, and these were characterized as iron(III) alkylperoxo complexes by resonance Raman and EPR spectroscopies for L(1) and L(8). [(L(1))Fe(II)(OTf)(2)] gave rise to a mixture of high-spin (S = 5/2) and low-spin (S = 1/2) Fe(III)-OOR isomers in acetonitrile, whereas both [(L(1))Fe(OTf)(2)] in CH(2)Cl(2) and [(L(8))Fe(OTf)(2)](2) in acetonitrile afforded only high-spin intermediates. The L(1) and L(8) intermediates both decomposed to form respective phenolate complexes, but their reaction times differed by 3 orders of magnitude. In the case of L(1), (18)O isotope labeling indicated that the phenolate oxygen is derived from the terminal peroxide oxygen via a species that can undergo partial exchange with exogenous water. The iron(III) alkylperoxo intermediate is proposed to undergo homolytic O-O bond cleavage to yield an oxoiron(IV) species as an unobserved reactive intermediate in the hydroxylation of the pendant alpha-aryl substituents. The putative homolytic chemistry was confirmed by using 2-methyl-1-phenyl-2-propyl hydroperoxide (MPPH) as a probe, and the products obtained in the presence and in the absence of air were consistent with formation of alkoxy radical (RO(*)). Moreover, when one ortho position was labeled with deuterium, no selectivity was observed between hydroxylation of the deuterated and normal isotopomeric ortho sites, but a significant 1,2-deuterium shift ("NIH shift") occurred. These results provide strong mechanistic evidence for a metal-centered electrophilic oxidant, presumably an oxoiron(IV) complex, in these arene hydroxylations and support participation of such a species in the mechanisms of the nonheme iron- and pterin-dependent aryl amino acid hydroxylases.     

The reaction of [FeII(tpa)] with H2O2 in acetonitrile and acetone--distinct intermediates and yet similar catalysis

The reaction of [FeII(tpa)(OTf)2] (tpa=tris(2-pyridylmethyl)amine) and its related 5-Me3-tpa complex with hydrogen peroxide affords spectroscopically distinct iron(III)-peroxo intermediates in CH3CN and acetone. The reaction in acetonitrile at -40 degrees C results in the formation of the previously reported Fe(III)-OOH intermediate, the end-on hydroperoxo coordination mode of which is established in this paper by detailed resonance Raman isotope-labeling experiments. On the other hand, the reaction in acetone below -40 degrees C leads to the observation of a different peroxo intermediate identified by resonance Raman spectroscopy to be an FeIII-OOC (CH3)2OH species; this represents the first example of an intermediate derived from the adduct of H2O2 and acetone. The peroxoacetone intermediate decays more rapidly than the corresponding FeIII-OOH species and converts to an FeIV=O species by O-O bond homolysis. This decay process is analogous to that observed for [FeIII(tpa)(OOtBu)]2+ and in fact exhibits a comparable enthalpy of activation of 54(3) kJ mol(-1). Thus, with respect to their physical properties at low temperature, the peroxoacetone intermediate resembles [FeIII(tpa)(OOtBu)]2+ more than the corresponding FeIII-OOH species. At room temperature, however, the behavior of the Fe(tpa)/H2O2 combination in acetone in catalytic hydrocarbon oxidations differs significantly from that of the Fe(tpa)/tBuOOH combination and more closely matches that of the Fe(tpa)/H2O2 combination in CH3CN. Like the latter, the Fe(tpa)/H2O2 combination in acetone catalyzes the hydroxylation of cis-1,2-dimethylcyclohexane to its tertiary alcohol with high stereoselectivity and carries out the epoxidation and cis-dihydroxylation of olefins. These results demonstrate the subtle complexity of the Fe(tpa)/H2O2 reaction surface.     

electrochemical generation of a nonheme oxoiron(IV) complex

The complex [Fe(IV)O(N4Py)]2+ (N4Py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine) has been prepared by bulk electrolysis in aqueous CH3CN and CH2Cl2, and its redox properties characterized. Bulk chronocoulometry and spectropotentiometry experiments in CH3CN show that [Fe(II)(N4Py)(NCCH3)]2+ can be oxidized quantitatively to its iron(III) derivative at an applied potential of +0.71 V vs ferrocene and then to the oxoiron(IV) complex (in the presence of added water) at potentials above +1.3 V. The E1/2 value for the Fe(IV/III) couple has been estimated to be +0.90 V from spectropotentiometric titrations in CH3CN and cyclic voltammetric measurements in CH2Cl2.     

Mixed unsymmetric oxadiazoline and/or imine platinum(II) complexes

Iminoacylation of acetone oxime Me(2)C[double bond, length as m-dash]NOH upon reaction with trans-[PtCl(2)(NCCH(2)CO(2)Me)(2)] and [2 + 3] cycloaddition of acyclic nitrone (-)O(+)N(Me) = C(H)(C(6)H(4)Me-4) to a nitrile ligand in lead to the formation of mono-imine trans-[PtCl(2)(imine-a)(NCCH(2)CO(2)Me)] [imine-a = NH[double bond, length as m-dash]C(CH(2)CO(2)Me)ON = CMe(2)] and mono-oxadiazoline trans-[PtCl(2)(oxadiazoline-a)(NCCH(2)CO(2)Me)] [oxadiazoline-a = [upper bond 1 start]N[double bond, length as m-dash]C(CH(2)CO(2)Me)ON(Me)C[upper bond 1 end](H)(C(6)H(4)Me-4)] unsymmetric mixed ligand complexes, respectively, as the main products. Reactions of or with acetone oxime , cyclic nitrone (-)O(+)N = CHCH(2)CH(2)C[upper bond 1 end]Me(2) or N,N-diethylhydroxylamine give access, in moderate to good yields, to the unsymmetric mixed ligand oxadiazoline and/or imine complexes trans-[PtCl(2)(oxadiazoline-a)(imine-a)] , trans-[PtCl(2)(oxadiazoline-a)(oxadiazoline-b)] [oxadiazoline-b = [upper bond 1 start]N[double bond, length as m-dash]C(CH(2)CO(2)Me)O[lower bond 1 start]NC[upper bond 1 end](H)CH(2)CH(2)C[lower bond 1 end]Me(2)], trans-[PtCl(2)(imine-a)(imine-b)] [imine-b = NH = C(CH(2)CO(2)Me)ONEt(2)] or trans-[PtCl(2)(imine-a)(oxadiazoline-b)] . The cis mono-imine mixed ligand complex cis-[PtCl(2)(imine-a)(NCCH(2)CO(2)Me)] is the major product from the reaction of cis-[PtCl(2)(NCCH(2)CO(2)Me)(2)] with the oxime , while the di-imine compound cis-[PtCl(2)(imine-a)(2)] is a minor product. Reaction of cis-[PtCl(2)(imine-a)(NCCH(2)CO(2)Me)] with N,N-diethylhydroxylamine or the cyclic nitrone affords, in good yields, the unsymmetric mixed ligand complexes cis-[PtCl(2)(imine-a)(imine-b)] or cis-[PtCl(2)(imine-a)(oxadiazoline-b)] , respectively. All these complexes were characterized by elemental analyses, IR and (1)H, (13)C and (195)Pt NMR spectroscopies, and FAB(+)-MS. The X-ray structural analysis of trans-[PtCl(2){NH=C(CH(2)CO(2)Me)ON=CMe(2)}(NCCH(2)CO(2)Me)] is also reported.     

1,2-bis(pyridine-2-carboxamido)benzenate(2-), (bpb)2-: a noninnocent ligand. Syntheses, structures, and mechanisms of formation of [(n-Bu)4N][FeIV2(mu-N)(bpb)2(X)2] (X = CN-, N3-) and the electronic structures of [MIII(bpbox1)(CN)2] (M = Co, Fe)

The well-known tetradentate ligand 1,2-bis(pyridine-2-carboxamido)benzenate(2-), (bpb)2-, and its 4,5-dichloro analogue, (bpc)2-, are shown to be "noninnocent" ligands in the sense that in coordination compounds they can exist in their radical one- and diamagnetic two-electron-oxidized forms (bpbox1)- and (bpbox2)0 (and (bpcox1)- and (bpcox2)0), respectively. Photolysis of high-spin [(n-Bu)4N][FeIII(bpb)(N3)2] and its (bpc)2- analogue in acetone solution at room temperature generates the diamagnetic dinuclear complex [(n-Bu)4N][FeIV2(mu-N)(bpb)2(N3)2] and its (bpc)2- analogue; the corresponding cyano complex [(n-Bu)4N][FeIV2(mu-N)(bpb)2(CN)2] has been prepared via N3- substitution by CN-. Photolysis in frozen acetonitrile solution produces a low-spin ferric species (S = 1/2) which presumably is [FeIII(bpbox2)(N)(N3)]-, as has been established by EPR and M?ssbauer spectroscopy. The mononuclear complexes [(n-Bu)4N][FeIII(bpb)(CN2)] (low spin), [Et4N][CoIII(bpb)(CN)2] and Na[CoIII(bpc)-(CN)2].3CH3OH can be electrochemically or chemically one-electron-oxidized to give [FeIII(bpbox1)(CN)2]0 (S = 0), [CoIII(bpbox1)(CN)2]0 (S = 1/2), and [CoIII(bpcox1)(CN)2]0 (S = 1/2). All complexes have been characterized by UV-vis, EPR, and M?ssbauer spectroscopy, and their electro- and magnetochemistries have been studied. The crystal structures of [(n-Bu)4N][FeIII(bpb)(N3)2].1/2C6H6CH3, Na[FeIII(bpb)(CN)2], Na[CoIII(bpc)(CN)2].3CH3OH, [(n-Bu)4N][FeIV2(mu-N)(bpb)2(CN)2], and [(n-Bu)4N][FeIV2(mu-N)(bpb)(N3)2] have been determined by single-crystal X-ray diffraction.     

IrII(ethene): metal or carbon radical? Part II: oxygenation via iridium or direct oxygenation at ethene?

Treatment of [(Me3tpa)IrII(ethene)]2+ (Me(3)tpa =N,N,N-tri(6-methyl-2-pyridylmethyl)amine)(1(2+)) with dioxygen in weakly coordinating solvents results in formation of [(Me3tpa)IrIII(ethene)(superoxo)]2+ (4a2+). In the presence of DMPO (DMPO = 5,5-dimethyl-2-pyrrolidine-1-oxide) DMPO is substituted for ethene, and subsequently oxidized to DMPOX by the superoxo fragment to give [(Me3tpa)IrIII(DMPOX)]2+ (7(2+); DMPOX = 5,5-dimethyl-2-pyrrolidone-1-oxide). In acetonitrile, in the absence of DMPO, oxygenation of 1(2+) to [(Me3tpa)IrIII(formylmethyl)(MeCN)]2+ (2(2+)) is observed. In the presence of DMPO the formation of 2(2+) and 7(2+) is competing. Oxygenation of 1(2+) to 2(2+) may proceed via 4a(2+), involving an insertion mechanism at the metal. However, a mechanism based on olefin ligand non-innocence seems a reasonable alternative. This involves formation of acetonitrile adduct [(Me3tpa)Ir(ethene)(MeCN)]2+ (3(2+)), which has a significant metalla-ethyl radical (IrIII-CH2CH2*) character, allowing attack of 3O2 directly at the ethene ligand. Both pathways are discussed on the basis of experimental observations and DFT geometry optimizations.     

Ortho-hydroxylation of benzoic acids with hydrogen peroxide at a non-heme iron center

The iron-assisted hydroxylation of benzoic acid to salicylic acid by 1/H2O2 has been achieved in good yield under mild conditions (where is [Fe(II)(BPMEN)(CH3CN)2](ClO4)2 and BPMEN =N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)ethane-1,2-diamine); the product of this reaction is a novel mononuclear iron(III) complex with a chelating salicylate.     

H2O2-reactivity of copper(II) complexes supported by tris[(pyridin-2-yl)methyl]amine ligands with 6-phenyl substituents

The structure and H(2)O(2)-reactivity of a series of copper(II) complexes supported by tris[(pyridin-2-yl)methyl]amine (TPA) derivatives having a phenyl group at the 6-position of pyridine donor group(s) [(6-phenylpyridin-2-yl)methyl]bis[(pyridin-2-yl)methyl]amine (Ph(1)TPA), bis[(6-phenylpyridin-2-yl)methyl][(pyridin-2-yl)methyl]amine (Ph(2)TPA), and tris[(6-phenylpyridin-2-yl)methyl]amine (Ph(3)TPA) have systematically been examined to get insights into the aromatic substituent (6-Ph) effects on the coordination chemistry of TPA ligand system. The X-ray crystallographic analyses have revealed that [Cu(II)(TPA)(CH(3)CN)](ClO(4))(2) (CuTPA) and [Cu(II)(Ph(3)TPA)(CH(3)CN)](ClO(4))(2) (3) exhibit a trigonal bipyramidal structure, whereas [Cu(II)(Ph(1)TPA)(CH(3)CN)](ClO(4))(2) (1) shows a slightly distorted square pyramidal structure and [Cu(II)(Ph(2)TPA)(CH(3)CN)](ClO(4))(2) (2) has an intermediate structure between trigonal bipyramidal and square pyramidal. On the other hand, the UV-vis and ESR data have suggested that all the copper(II) complexes have a similar trigonal bipyramidal structure in solution. The redox potentials of CuTPA, 1, 2, and 3 have been determined as E(1/2) = -0.34, -0.28, -0.16, and -0.04 mV vs Ag/AgNO(3), respectively, demonstrating that introduction of each 6-Ph group causes positive shift of E(1/2) about 0.1 V. Notable difference in H(2)O(2)-reactivity has been found among the copper(II) complexes. Namely, CuTPA and 1 afforded mononuclear copper(II)-hydroperoxo complexes CuTPA-OOH and 1-OOH, respectively, whereas complex 2 provided bis(mu-oxo)dicopper(III) complex 2-oxo. On the other hand, copper(II) complex 3 was reduced to the corresponding copper(I) complex 3(red). On the basis of the H(2)O(2)-reactivity together with the X-ray structures and the redox potentials of the copper(II) complexes, the substituent effects of 6-Ph are discussed in detail.     

2-rhodaoxetanes: their formation of oxidation of [RhI(ethene)]+ and their reactivity upon protonation

New cationic, pentacoordinate complexes [(TPA)Rh1(ethene)]+, [1a]+, and [(MeTPA)Rh1(ethene)]+, [1b]+, have been prepared (TPA = N,N,N-tri(2-pyridylmethyl)amine, MeTPA = N-[(6-methyl-2-pyridyl)-methyl]-N,N-di(2-pyridylmethyl)amine). Complex [1a]+ is selectively converted by aqueous HCl to [(TPA)RhIII-(ethyl)Cl]+, [2a]+. The same reaction with [1b]+ results in the [(MeTPA)RhIII-(ethyl)Cl]+ isomers [2b]+ and [2c]+. Treatment of [1a]+ and [1b]+ with aqueous H2O2 results in a selective oxygenation to the unsubstituted 2-rho-da(III)oxetanes (1-oxa-2-rhoda(III)cyclo-butanes) [(TPA)RhIII(kappa2-C,O-2-oxyethyl)]+, [3a]+, and [(MeTPA)RhIII(kappa2-C,O-2-oxyethyl)]+, [3b]+. The reactivity of 2-rhodaoxetanes [3a]+ and [3b]+ is dominated by the nucleophilic character of their 2-oxyethyl oxygen. Reaction of [3a]+ and [3b]+ with the non-coordinating acid HBAr(f)4 results in the dicationic protonated 2-rhodaoxetanes [(TPA)RhIII(kappa2-2-hydroxyethyl)]2+, [4a]2+, and [(MeTPA)RhIII(kappa2-2-hydroxyethyl)]2+, [4b]2+. These eliminate acetaldehyde at room temperature, probably via a coordinatively unsaturated kappa1-2-hydroxyethyl complex. In acetonitrile, complex [4a]2+ is stabilised as [(TPA)-RhIII(kappa1-2-hydroxyethyl)(MeCN)]2+, [5a]2+, whereas the MeTPA analogue [4b]2+ continues to eliminate acetaldehyde. Reaction of [3a]+ with NH4Cl and Mel results in the coordinatively saturated complexes [(TPA)RhIII(kappa1-2-hydroxyethyl)(Cl)]+, [6a]+, and [(TPA)-RhIII(kappa1-2-methoxyethyl)(I)+, [7a]+, respectively. Reaction of [3a]+ with NH4+ in MeCN results in formation of the dicationic metallacyclic amide [(TPA)-RhIII [kappa2-O,C-2-(acetylamino)ethyl]]2+, [9]2+, via the intermediates [4a]2+, [5a]2+ and the metallacyclic iminoester [(TPA)RhIII[kappa2-N,C-2-(acetimidoyloxy)ethyl]]2+, [8]2+. The observed overall conversion of the [Rh(I)(ethene)] complex [1a]+ to the metallacyclic amide [9]2+ via 2-rhodaoxetane [3a]+, provides a new route for the amidation of a [RhI(ethene)] fragment.     

Mixed-valent [FeIV(mu-O)(mu-carboxylato)2FeIII]3+ core

The symmetrically ligated complexes 1, 2, and 3 with a (mu-oxo)bis(mu-acetato)diferric core can be one-electron oxidized electrochemically or chemically with aminyl radical cations [*NR3][SbCl6] in acetonitrile yielding complexes which contain the mixed-valent [(mu-oxo)bis(mu-acetato)iron(IV)iron(III)]3+ core: [([9]aneN3)(2FeIII2)(mu-O)(mu-CH3CO2)2](ClO4)2 (1(ClO4)2), [(Me3[9]aneN3)(2FeIII2)(mu-O)(mu-CH3CO2)2](PF6)2 (2(PF6)(2)), and [(tpb)(2FeIII2)(mu-O)(mu-CH3CO2)2] (3) where ([9]aneN3) is the neutral triamine 1,4,7-triazacyclononane and (Me3[9]aneN3) is its tris-N-methylated derivative, and (tpb)(-) is the monoanion trispyrazolylborate. The asymmetrically ligated complex [(Me3[9]aneN3)FeIII(mu-O)(mu-CH3CO2)2FeIII(tpb)](PF6) (4(PF6)) and its one-electron oxidized form [4ox]2+ have also been prepared. Finally, the known heterodinuclear species [(Me3[9]aneN3)CrIII(mu-O)(mu-CH3CO2)2Fe([9]aneN3)](PF6)2 (5(PF6)(2)) can also be one-electron oxidized yielding [5ox]3+ containing an iron(IV) ion. The structure of 4(PF6).0.5CH3CN.0.25(C2H5)2O has been determined by X-ray crystallography and that of [5ox]2+ by Fe K-edge EXAFS-spectroscopy (Fe(IV)-O(oxo): 1.69(1) A; Fe(IV)-O(carboxylato) 1.93(3) A, Fe(IV)-N 2.00(2) A) contrasting the data for 5 (Fe(III)-O(oxo) 1.80 A; Fe(III)-O(carboxylato) 2.05 A, Fe-N 2.20 A). [5ox]2+ has an St = 1/2 ground state whereas all complexes containing the mixed-valent [FeIV(mu-O)(mu-CH3CO2)2FeIII]3+ core have an St = 3/2 ground state. M?ssbauer spectra of the oxidized forms of complexes clearly show the presence of low spin FeIV ions (isomer shift approximately 0.02 mm s(-1), quadrupole splitting approximately 1.4 mm s(-1) at 80 K), whereas the high spin FeIII ion exhibits delta approximately 0.46 mm s(-1) and DeltaE(Q) approximately 0.5 mm s(-1). M?ssbauer, EPR spectral and structural parameters have been calculated by density functional theoretical methods at the BP86 and B3LYP levels. The exchange coupling constant, J, for diiron complexes with the mixed-valent FeIV-FeIII core (H = -2J S1.S2; S(1) = 5/2; S2 = 1) has been calculated to be -88 cm(-1) (intramolecular antiferromagnetic coupling) and for the reduced diferric form of -75 cm(-1) in reasonable agreement with experiment (J = -120 cm(-1)).     

Syntheses, structures, and reactivity of low spin iron(III) complexes containing a single carboxamido nitrogen in a [FeN5L] chromophore

A new pentacoordinate ligand based on TPA (tris-(2-pyridylmethyl)amine), namely, N,N-bis(2-pyridylmethyl)amine-N-ethyl-2-pyridine-2-carboxamide (PaPy(3)H), has been synthesized. The iron(III) complexes of this ligand, namely, [Fe(PaPy(3))(CH(3)CN)](ClO(4))(2) (1), [Fe(PaPy(3))(Cl)]ClO(4) (2), [Fe(PaPy(3))(CN)]ClO(4) (3), and [Fe(PaPy(3))(N(3))]ClO(4) (4), have been isolated and complexes 1-3 have been structurally characterized. These complexes are the first examples of monomeric iron(III) complexes with one carboxamido nitrogen in the first coordination sphere. All four complexes are low spin and exhibit rhombic EPR signals around g = 2. The solvent bound species [Fe(PaPy(3))(CH(3)CN)](ClO(4))(2) reacts with H(2)O(2) in acetonitrile at low temperature to afford [Fe(PaPy(3))(OOH)](+) (g = 2.24, 2.14, 1.96). When cyclohexene is allowed to react with 1/H(2)O(2) at room temperature, a significant amount of cyclohexene oxide is produced along with the allylic oxidation products. Analysis of the oxidation products indicates that the allylic oxidation products arise from a radical-driven autoxidation process while the epoxidation is carried out by a distinctly different oxidant. No epoxidation of cyclohexene is observed with 1/TBHP.     

Carboxylate coordination chemistry of a mononuclear Ni(II) center in a hydrophobic or hydrogen bond donor secondary environment: relevance to acireductone dioxygenase

A series of Ni(II) carboxylate complexes, supported by a chelate ligand having either secondary hydrophobic phenyl groups (6-Ph2TPA, N,N-bis((6-phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine) or hydrogen bond donors (bnpapa, N,N-bis((6-neopentylamino-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine), have been prepared and characterized. X-ray crystallographic studies of [(6-Ph2TPA)Ni(O2C(CH2)2SCH3)]ClO4.CH2Cl2 (4.CH2Cl2) and [(6-Ph2TPA)Ni(O2CCH2SCH3)]ClO(4).1.5CH2Cl2 (5.1.5CH2Cl2) revealed that each complex contains a distorted octahedral Ni(II) center and a bidentate carboxylate ligand. A previously described benzoate complex ([(6-Ph2TPA)Ni(O2CPh)]ClO4 (3)) has similar structural characteristics. Recrystallization of dry powdered samples of 3, 4.0.5CH2Cl2, and 5 from wet organic solvents yielded a second series of crystalline Ni(II) carboxylate complexes having a coordinated monodentate carboxylate ligand ([(6-Ph2TPA)Ni(H2O)(O2CPh)]ClO4 (6), [(6-Ph2TPA)Ni(H2O)(O2C(CH2)2SCH3)]ClO4.0.2CH2Cl2 (7.0.2CH2Cl2), [(6-Ph2TPA)Ni(H2O)(O2CCH2SCH3)]ClO4 (8)) which is stabilized by a hydrogen-bonding interaction with a Ni(II)-bound water molecule. In the cationic portions of 7.0.2CH2Cl2 and 8, weak CH/pi interactions are also present between the methylene units of the carboxylate ligands and the phenyl appendages of the 6-Ph2TPA ligands. A formate complex of the formulation [(6-Ph2TPA)Ni(H2O)(O2CH)]ClO4 (9) was isolated and characterized. The mononuclear Ni(II) carboxylate complexes [(bnpapa)Ni(O2CPh)]ClO4 (10), [(bnpapa)Ni(O2C(CH2)2SCH3)]ClO4 (11), [(bnpapa)Ni(O2CCH2SCH3)]ClO4 (12), and [(bnpapa)Ni(O2CH)]ClO4 (13) were isolated and characterized. Two crystalline solvate forms of 10 (10.CH3CN and 10.CH2Cl2) were examined by X-ray crystallography. In both, the distorted octahedral Ni(II) center is ligated by a bidentate benzoate ligand, one Ni(II)-bound oxygen atom of which accepts two hydrogen bonds from the supporting bnpapa chelate ligand. Spectroscopic studies of 10(-13) suggest that all contain a bidentate carboxylate ligand, even after exposure to water. The combined results of this work enable the formulation of a proposed pathway for carboxylate product release from the active site Ni(II) center in acireductone dioxygenase.     

Titanium(IV) and zirconium(IV) sulfato complexes containing the Kläui tripodal ligand: molecular models of sulfated metal oxide surfaces

Treatment of titanyl sulfate in about 60 mM sulfuric acid with NaL(OEt) (L(OEt) (-)=[(eta(5)-C(5)H(5))Co{P(O)(OEt)(2)}(3)](-)) afforded the mu-sulfato complex [(L(OEt)Ti)(2)(mu-O)(2)(mu-SO(4))] (2). In more concentrated sulfuric acid (>1 M), the same reaction yielded the di-mu-sulfato complex [(L(OEt)Ti)(2)(mu-O)(mu-SO(4))(2)] (3). Reaction of 2 with HOTf (OTf=triflate, CF(3)SO(3)) gave the tris(triflato) complex [L(OEt)Ti(OTf)(3)] (4), whereas treatment of 2 with Ag(OTf) in CH(2)Cl(2) afforded the sulfato-capped trinuclear complex [{(L(OEt))(3)Ti(3)(mu-O)(3)}(mu(3)-SO(4)){Ag(OTf)}][OTf] (5), in which the Ag(OTf) moiety binds to a mu-oxo group in the Ti(3)(mu-O)(3) core. Reaction of 2 in H(2)O with Ba(NO(3))(2) afforded the tetranuclear complex (L(OEt))(4)Ti(4)(mu-O)(6) (6). Treatment of 2 with [{Rh(cod)Cl}(2)] (cod=1,5-cyclooctadiene), [Re(CO)(5)Cl], and [Ru(tBu(2)bpy)(PPh(3))(2)Cl(2)] (tBu(2)bpy=4,4'-di-tert-butyl-2,2'-dipyridyl) in the presence of Ag(OTf) afforded the heterometallic complexes [(L(OEt))(2)Ti(2)(O)(2)(SO(4)){Rh(cod)}(2)][OTf](2) (7), [(L(OEt))(2)Ti(O)(2)(SO(4)){Re(CO)(3)}][OTf] (8), and [{(L(OEt))(2)Ti(2)(mu-O)}(mu(3)-SO(4))(mu-O)(2){Ru(PPh(3))(tBu(2)bpy)}][OTf](2) (9), respectively. Complex 9 is paramagnetic with a measured magnetic moment of about 2.4 mu(B). Treatment of zirconyl nitrate with NaL(OEt) in 3.5 M sulfuric acid afforded [(L(OEt))(2)Zr(NO(3))][L(OEt)Zr(SO(4))(NO(3))] (10). Reaction of ZrCl(4) in 1.8 M sulfuric acid with NaL(OEt) in the presence Na(2)SO(4) gave the mu-sulfato-bridged complex [L(OEt)Zr(SO(4))(H(2)O)](2)(mu-SO(4)) (11). Treatment of 11 with triflic acid afforded [(L(OEt))(2)Zr][OTf](2) (12), whereas reaction of 11 with Ag(OTf) afforded a mixture of 12 and trinuclear [{L(OEt)Zr(SO(4))(H(2)O)}(3)(mu(3)-SO(4))][OTf] (13). The Zr(IV) triflato complex [L(OEt)Zr(OTf)(3)] (14) was prepared by reaction of L(OEt)ZrF(3) with Me(3)SiOTf. Complexes 4 and 14 can catalyze the Diels-Alder reaction of 1,3-cyclohexadiene with acrolein in good selectivity. Complexes 2-5, 9-11, and 13 have been characterized by X-ray crystallography.