Combined experimental and theoretical study on aromatic hydroxylation by mononuclear nonheme iron(IV)-oxo complexes

The hydroxylation of aromatic compounds by mononuclear nonheme iron(IV)-oxo complexes, [FeIV(Bn-tpen)(O)]2+ (Bn-tpen=N-benzyl-N,N',N'-tris(2-pyridylmethyl)ethane-1,2-diamine) and [FeIV(N4Py)(O)]2+ (N4Py=N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine), has been investigated by a combined experimental and theoretical approach. In the experimental work, we have performed kinetic studies of the oxidation of anthracene with nonheme iron(IV)-oxo complexes generated in situ, thereby determining kinetic and thermodynamic parameters, a Hammett rho value, and a kinetic isotope effect (KIE) value. A large negative Hammett rho value of -3.9 and an inverse KIE value of 0.9 indicate that the iron-oxo group attacks the aromatic ring via an electrophilic pathway. By carrying out isotope labeling experiments, the oxygen in oxygenated products was found to derive from the nonheme iron(IV)-oxo species. In the theoretical work, we have conducted density functional theory (DFT) calculations on the hydroxylation of benzene by [FeIV(N4Py)(O)]2+. The calculations show that the reaction proceeds via two-state reactivity patterns on competing triplet and quintet spin states via an initial rate determining electrophilic substitution step. In analogy to heme iron(IV)-oxo catalysts, the ligand is noninnocent and actively participates in the reaction mechanism by reshuttling a proton from the ipso position to the oxo group. Calculated kinetic isotope effects of C6H6 versus C6D6 confirm an inverse isotope effect for the electrophilic substitution pathway. Based on the experimental and theoretical results, we have concluded that the aromatic ring oxidation by mononuclear nonheme iron(IV)-oxo complexes does not occur via a hydrogen atom abstraction mechanism but involves an initial electrophilic attack on the pi-system of the aromatic ring to produce a tetrahedral radical or cationic sigma-complex.     

Axial ligand substituted nonheme FeIV=O complexes: observation of near-UV LMCT bands and Fe=O Raman vibrations

Axial ligand substitution of a mononuclear nonheme oxoiron(IV) complex, [FeIV(O)(TMC)(NCCH3)]2+ (1) (TMC = 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane), leads to the formation of new FeIV=O species with relatively intense electronic absorption features in the near-UV region. The presence of these near-UV features allowed us to make the first observation of Fe=O vibrations of S = 1 mononuclear nonheme oxoiron(IV) complexes by resonance Raman spectroscopy. We have also demonstrated that the reactivity of nonheme oxoiron(IV) intermediates is markedly influenced by the axial ligands.     

非血红素配合物[FeⅣ(O)(TMC)(NCMe)]2+与[FeⅣ(O)(TMCS)]+的几何结构、电子结构、成键性和反应活性比较

采用密度泛函理论计算了[FeⅣ(O)(TMC)(NCMe)]2+ 和[FeⅣ(O)(TMCS)]+的电子结构、反应活性和Fe—O的成键性. 几何构型的优化采用非限制性的B3LYP混合密度泛函方法, 重原子Fe的优化采用是LanL2dZ基组, C, H, O, N和S的优化采用TZV基组, 理论计算结果与实验结果相符. 通过对轨道系数和键级的分析发现, TMC配位基对Fe—O的π键几乎没有影响. 由于竖直方向的硫甲基配位基的轨道与Fe的3d轨道具有较强的重迭, 而乙腈配位基作为轴向配体时, 这种重迭则小得多, 导致了两种配合物在电子结构和反应活性上存在一定的差别.     

Spectroscopic study of [Fe2O2(5-Et3-TPA)2]3+: nature of the Fe2O2 diamond core and its possible relevance to high-valent binuclear non-heme enzyme intermediates

The spectroscopic properties and electronic structure of an Fe(2)(III,IV) bis-mu-oxo complex, [Fe(2)O(2)(5-Et(3)-TPA)(2)](ClO(4))(3) where 5-Et(3)-TPA = tris(5-ethyl-2-pyridylmethyl)amine, are explored to determine the molecular origins of the unique electronic and geometric features of the Fe(2)O(2) diamond core. Low-temperature magnetic circular dichroism (MCD) allows the two features in the broad absorption envelope (4000-30000 cm(-)(1)) to be resolved into 13 transitions. Their C/D ratios and transition polarizations from variable temperature-variable field MCD saturation behavior indicate that these divide into three types of electronic transitions; t(2) --> t(2) involving excitations between metal-based orbitals with pi Fe-O overlap (4000-10000 cm(-)(1)), t(2)/t(2) --> e involving excitations to metal-based orbitals with sigma Fe-O overlap (12500-17000 cm(-)(1)) and LMCT (17000-30000 cm(-)(1)) and allows transition assignments and calibration of density functional calculations. Resonance Raman profiles show the C(2)(h)() geometric distortion of the Fe(2)O(2) core results in different stretching force constants for adjacent Fe-O bonds (k(str)(Fe-O(long)) = 1.66 and k(str)(Fe-O(short)) = 2.72 mdyn/A) and a small ( approximately 20%) difference in bond strength between adjacent Fe-O bonds. The three singly occupied pi-metal-based orbitals form strong superexchange pathways which lead to the valence delocalization and the S = (3)/(2) ground state. These orbitals are key to the observed reactivity of this complex as they overlap with the substrate C-H bonding orbital in the best trajectory for hydrogen atom abstraction. The electronic structure implications of these results for the high-valent enzyme intermediates X and Q are discussed.     

Investigating the electronic structure and bonding in uranyl compounds by combining NEXAFS spectroscopy and quantum chemistry

The nature of the reactivity of the "yl" oxygens has been a subject of constant interest for a long time in uranyl chemistry. Thus, the electron-donor ability of the equatorial ligands plays an important role in the nature of the uranyl U=O bond. In this paper, a combination of near-edge X-ray absorption fine structure (NEXAFS) spectroscopy and both ground-state and time-dependent density functional theory (DFT) calculations have been used to examine the effect of equatorial plane ligation on the U=O bonding in two uranyl complexes: [UO(2)(py)(3)I(2)] and [UO(2)(CN)(5)][NEt(4)](3). By coupling experimental data and theory, spectral features observed in the oxygen K-edge NEXAFS spectra have been assigned. Despite the inert character of the U=O bond, we observe that the electron-donating or withdrawing character of the equatorial ligands has a measurable effect on features in the NEXAFS spectra of these species and thereby on the unoccupied molecular orbitals of {UO(2)}(2+).     

Early-late heterobimetallic alkoxides as model systems for late-transition-metal catalysts supported on titania

Titanium complexes with chelating alkoxide ligands [TiCp*(O(2)Bz)(OBzOH)] (1) and [TiCp*(Me)((OCH(2))(2)Py)] (2) were synthesised by reaction of [TiCp*Me(3)] (Cp*=eta(5)-C(5)Me(5)) with 2-hydroxybenzyl alcohol ((HO)(2)Bz) and 2,6-pyridinedimethanol ((HOCH(2))(2)Py), respectively. Complex 1 reacts with [(M(mu-OH)(cod))(2)] (M=Rh, Ir) to yield the early-late heterobimetallic complexes [TiCp*(O(2)Bz)(2)M(cod)] [M=Rh (3), Ir (4)]. Carbon monoxide readily replaces the COD ligand in 3 to give the rhodium dicarbonyl derivative [TiCp*(O(2)Bz)(2)Rh(CO)(2)] (5). Compound 2 reacts with [(M(mu-OH)(cod))(2)] (M=Rh, Ir) with protonolysis of a Tibond;Me bond to give [TiCp*((OCH(2))(2)Py)(mu-O)M(cod)] [M=Rh (6), Ir (7)]. The molecular structures of complexes 3, 5 and 7 were established by single-crystal X-ray diffraction studies.     

Electronic structure and reactivity of low-spin Fe(III)-hydroperoxo complexes: comparison to activated bleomycin

The spectroscopic properties, electronic structure, and reactivity of the low-spin Fe(III)-hydroperoxo complex [Fe(N4Py)(OOH)](2+) (1, N4Py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine) are investigated in comparison to those of activated bleomycin (ABLM). Complex 1 is characterized by Raman features at 632 (Fe-O stretch) and 790 cm(-1) (O-O stretch), corresponding to a strong Fe-O bond (force constant 3.62 mdyn/A) and a weak O-O bond (3.05 mdyn/A). The UV-vis spectrum of 1 shows a broad absorption band around 550 nm that is assigned to a charge-transfer transition from the hydroperoxo to a t(2g) d orbital of Fe(III) using resonance Raman and MCD spectroscopies and density functional (DFT) calculations. Compared to low-spin [Fe(TPA)(OH(x))(OO(t)Bu)](x+)(TPA = tris(2-pyridylmethyl)amine, x = 1 or 2), an overall similar Fe-OOR bonding results for low-spin Fe(III)-alkylperoxo and -hydroperoxo species. Correspondingly, both systems show similar reactivities and undergo homolytic cleavage of the O-O bond. From the DFT calculations, this reaction is more endothermic for 1 due to the reduced stabilization of the .OH radical compared to .O(t)Bu and the absence of the hydroxo ligand that helps to stabilize the resulting Fe(IV)=O species. In contrast, ABLM has a somewhat different electronic structure where no pi donor bond between the hydroperoxo ligand and iron(III) is present [Neese, F.; Zaleski, J. M.; Loeb-Zaleski, K.; Solomon, E. I. J. Am. Chem. Soc. 2000, 122, 11703]. Possible reaction pathways for ABLM are discussed in relation to known experimental results.     

Spectroscopic properties and electronic structure of low-spin Fe(III)-alkylperoxo complexes: homolytic cleavage of the O-O bond

The spectroscopic properties, electronic structure, and reactivity of the low-spin Fe(III)-alkylperoxo model complex [Fe(TPA)(OH(x))(OO(t)Bu)](x+) (1; TPA = tris(2-pyridylmethyl)amine, (t)Bu = tert-butyl, x = 1 or 2) are explored. The vibrational spectra of 1 show three peaks that are assigned to the O-O stretch (796 cm(-1)), the Fe-O stretch (696 cm(-)(1)), and a combined O-C-C/C-C-C bending mode (490 cm(-1)) that is mixed with upsilon(FeO). The corresponding force constants have been determined to be 2.92 mdyn/A for the O-O bond which is small and 3.53 mdyn/A for the Fe-O bond which is large. Complex 1 is characterized by a broad absorption band around 600 nm that is assigned to a charge-transfer (CT) transition from the alkylperoxo pi*(upsilon) to a t(2g) d orbital of Fe(III). This metal-ligand pi bond is probed by MCD and resonance Raman spectroscopies which show that the CT state is mixed with a ligand field state (t(2g) --> e(g)) by configuration interaction. This gives rise to two intense transitions under the broad 600 nm envelope with CT character which are manifested by a pseudo-A term in the MCD spectrum and by the shapes of the resonance Raman profiles of the 796, 696, and 490 cm(-1) vibrations. Additional contributions to the Fe-O bond arise from sigma interactions between mainly O-O bonding donor orbitals of the alkylperoxo ligand and an e(g) d orbital of Fe(III), which explains the observed O-O and Fe-O force constants. The observed homolytic cleavage of the O-O bond of 1 is explored with experimentally calibrated density functional (DFT) calculations. The O-O bond homolysis is found to be endothermic by only 15 to 20 kcal/mol due to the fact that the Fe(IV)=O species formed is highly stabilized (for spin states S = 1 and 2) by two strong pi and a strong sigma bond between Fe(IV) and the oxo ligand. This low endothermicity is compensated by the entropy gain upon splitting the O-O bond. In comparison, Cu(II)-alkylperoxo complexes studied before [Chen, P.; Fujisawa, K.; Solomon, E. I. J. Am. Chem. Soc. 2000, 122, 10177] are much less suited for O-O bond homolysis, because the resulting Cu(III)=O species is less stable. This difference in metal-oxo intermediate stability enables the O-O homolysis in the case of iron but directs the copper complex toward alternative reaction channels.     

Tristhiolatomolybdenum nitrides, (RS)(3)Mo[triple bond]N where R = (i)Pr and (t)Bu,preparation, characterization and comparisons with related trialkoxymolybdenumnitrides

The addition of thiols to ((t)BuO)(3)Mo[triple bond]N in toluene leads to the formation of (RS)(3)Mo[triple bond]N compounds as yellow, air-sensitive compounds, where R = (i)Pr and (t)Bu. The single-crystal structure of ((t)BuS)(3)Mo[triple bond]N reveals a weakly associated dimeric structure where two ((t)BuS)(3)Mo[triple bond]N units (Mo-N = 1.61 A, Mo-S = 2.31 A (av)) are linked via thiolate sulfur bridges with long 3.03 A (av) Mo-S interactions. Density functional theory calculations employing Gaussian 98 B3LYP (LANL2DZ for Mo and 6-31G* for N, O, S, and H) have been carried out for model compounds (HE)(3)Mo[triple bond]N and (HE)(3)MoNO, where E = O and S. A comparison of the structure and bonding within the related series ((t)BuE)(3)Mo[triple bond]N and ((t)BuE)(3)MoNO is made for E = O and S. In the thiolate compounds, the highest energy orbitals are sulfur lone-pair combinations. In the alkoxides, the HOMO is the N 2p lone-pair which has M-N sigma and M-O pi* character for the nitride. As a result of greater O p pi to Mo pi interactions, the M-N pi orbitals of the Mo-N triple bond are destabilized with respect to their thiolate counterpart. For the nitrosyl compounds, the greater O p pi to Mo d pi interaction favors greater back-bonding to the nitrosyl pi* orbitals for the alkoxides relative to the thiolates. The results of the calculations are correlated with the observed structural features and spectroscopic properties of the related alkoxide and thiolate compounds.     

New rhodium(III) and ruthenium(II) water-soluble complexes with 3,5-diaza-1-methyl-1-azonia-7-phosphatricyclo[3.3.1.1(3,7)]decane

The new water-soluble phosphine complexes of rhodium(III), [RhI(4)(mtpa)(2)]I (1), and ruthenium(II), [RuI(4)(mtpa)(2)].2H(2)O (2) and [RuI(2)(mtpa)(3)(H(2)O)]I(3).2H(2)O (3) (mtpa = 3,5-diaza-1-methyl-1-azonia-7-phosphatricyclo[3.3.1.1(3,7)]decane cation), have been prepared in the reactions of RhCl(3).3H(2)O and RuCl(3).3H(2)O in water in the presence of phosphine and potassium iodide. Properties and reactivity of the complexes have been investigated using (1)H and (31)P NMR and IR spectroscopies. The complexes have also been structurally characterized by single crystal X-ray diffraction studies. The compounds [RhI(4)(mtpa)(2)]I and [RuI(4)(mtpa)(2)].2H(2)O are zwitterionic octahedral complexes. The compounds were tested as catalysts for two-phase hydroformylation of 1-hexene and hydrogenation of cinnamaldehyde. Complex 1 is a selective catalyst for reduction of the C=C bond while complexes 2 and 3 selectively hydrogenate the C=O bond.     

Neutral (bis-beta-diketonato) iron(III), cobalt(II), nickel(II), copper(II) and zinc(II) metallocycles: structural, electrochemical and solvent extraction studies

Neutral dimeric metallocyclic complexes of type [M(2)(L(1))(2)B(n)] (where M = cobalt(II), nickel(II) and zinc(II), L(1) is the doubly deprotonated form of a 1,3-aryl linked bis-beta-diketone ligand of type 1,3-bis(RC(O)CH(2)C(O))C(6)H(4) (R=Me, n-Pr, t-Bu) and B is pyridine (Py) or 4-ethylpyridine (EtPy)) have been synthesised, adding to similar complexes already reported for copper(II). New lipophilic ligand derivatives with R = octyl or nonyl were also prepared for use in solvent extraction experiments. Structural, electrochemical and solvent extraction investigations of selected metal complex systems from the above series are reported, with the X-ray structures of [Co(2)(L(1))(2)(Py)(4)] x 2.25CHCl(3) x 0.5H(2)O (R=Pr), [Co(2)(L(1))(2)(EtPy)(4)] (R=t-Bu), [Ni(2)(L(1))(2)(EtPy)(4)] (R=t-Bu), [Zn(2)(L(1))(2)(EtPy)(2)] (R=Me) and [Zn(2)(L(1))(2)(EtPy)(4)] (R=t-Bu) being presented. The electrochemistry of H(2)L(1) (R=t-Bu) and of [Fe(2)(L(1))(3)], [Co(2)(L(1))(2)(Py)(4)], [Ni(2)(L(1))(2)(Py)(4)], [Cu(2)(L(1))(2)] and [Zn(2)(L(1))(2)(Py)(2)] has been examined. Oxidative processes for the complexes are dominantly irreversible, but several examples of quasireversible behaviour were observed and support the assignment of an anodic process, seen between +1.0 and +1.6 V, as a metal-centred oxidation. The reduction processes for the respective metal complexes are not simple, and irreversible in most cases. Solvent extraction studies (water/chloroform) involving variable concentrations of metal, bis-beta-diketone and heterocyclic base have been performed for cobalt(II) and zinc(II) using a radiotracer technique to probe the stoichiometries of the extracted species in each case. Synergism was observed when 4-ethylpyridine was added to the bis-beta-diketone ligand in the chloroform phase. Competitive extraction studies show a clear uptake preference for copper(II) over cobalt(II), nickel(II), zinc(II) and cadmium(II).     

Unexpected kinetic complexity in the formation of a nonheme oxoiron(IV) complex

The stoichiometric formation of [FeIV(O)(TPA)(NCMe)]2+ (TPA = tris(2-pyridylmethyl)amine) from the reaction of [FeII(TPA)(NCMe)2]2+ with 1 equiv. peracetic acid exhibits more kinetic complexity than might be expected from the simple stoichiometry. A multiple-pathway mechanism with an FeIV-peracetic acid species, [(TPA)FeIV(O)((H)O3CR)]2+/+, as the primary oxidant is proposed.     

The behavior of transition metal nitrido bonds towards protonation rationalized by means of localized bonding schemes and their weights

A new computational scheme is applied to rationalize the different protonation behaviors of the nitrido complexes [L'Mn(V)(N)(acac)](+), [LCr(V)(N)(acac)](+), and [LV(V)(N)(acac)](+). L and L' represent the macrocycles 1,4,7-triazacyclononane and its N-methylated derivative, respectively, and acac is the bidentate monoanion pentane-2,4-dionate. The bonds of the complexes are partitioned into bonds to be investigated and bonds of lesser interest. The investigated bonds are the transition metal nitrido bonds M(V)[triple chemical bond]N| (M = Mn, Cr, and V) and the bonds of lesser interest are located in the ligands. The ligand bonds are described by means of the strongly occupied natural bond orbitals. The electrons in the M(V)[triple chemical bond]N| nitrido bonds, however, are treated more accurately. A full configuration interaction procedure is applied in the space spanned by the strongly occupied natural bond orbitals and their corresponding antibonding orbitals. Localized bonding schemes and their weights are obtained for the d(pi)-p(pi) bonds of interest. This is achieved by representing the two-center natural bond orbitals for a d(pi)-p(pi) bond by the one-center natural hybrid orbitals localized at the bond atoms. The obtained bonding schemes are close to orthogonal valence bond structures. Their weights indicate that the nitrido nitrogen in [LV(V)(N)(acac)](+) is more easily protonated than the nitrido nitrogens in [L'Mn(V)(N)(acac)](+) and [LCr(V)(N)(acac)](+). This result is in good accord with experiment.     

End-on and side-on peroxo derivatives of non-heme iron complexes with pentadentate ligands: models for putative intermediates in biological iron/dioxygen chemistry

Mononuclear iron(III) species with end-on and side-on peroxide have been proposed or identified in the catalytic cycles of the antitumor drug bleomycin and a variety of enzymes, such as cytochrome P450 and Rieske dioxygenases. Only recently have biomimetic analogues of such reactive species been generated and characterized at low temperatures. We report the synthesis and characterization of a series of iron(II) complexes with pentadentate N5 ligands that react with H(2)O(2) to generate transient low-spin Fe(III)-OOH intermediates. These intermediates have low-spin iron(III) centers exhibiting hydroperoxo-to-iron(III) charge-transfer bands in the 500-600-nm region. Their resonance Raman frequencies, nu(O)(-)(O), near 800 cm(-)(1) are significantly lower than those observed for high-spin counterparts. The hydroperoxo-to-iron(III) charge-transfer transition blue-shifts and the nu(O)(-)(O) of the Fe-OOH unit decreases as the N5 ligand becomes more electron donating. Thus, increasing electron density at the low-spin Fe(III) center weakens the O-O bond, in accord with conclusions drawn from published DFT calculations. The parent [(N4Py)Fe(III)(eta(1)-OOH)](2+) (1a) ion in this series (N4Py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine) can be converted to its conjugate base, which is demonstrated to be a high-spin iron(III) complex with a side-on peroxo ligand, [(N4Py)Fe(III)(eta(2)-O(2))](+) (1b). A detailed analysis of 1a and 1b by EPR and M?ssbauer spectroscopy provides insights into their electronic properties. The orientation of the observed (57)Fe A-tensor of 1a can be explained with the frequently employed Griffith model provided the rhombic component of the ligand field, determined by the disposition of the hydroperoxo ligand, is 45 degrees rotated relative to the octahedral field. EXAFS studies of 1a and 1b reveal the first metrical details of the iron-peroxo units in this family of complexes: [(N4Py)Fe(III)(eta(1)-OOH)](2+) has an Fe-O bond of 1.76 A, while [(N4Py)Fe(III)(eta(2)-O(2))](+) has two Fe-O bonds of 1.93 A, values which are in very good agreement with results obtained from DFT calculations.     

Synthesis,Characterization, and Reactivity of Cobalt(III)–Oxygen Complexes Bearing a Macrocyclic N‐Tetramethylated Cyclam Ligand

Mononuclear metal–dioxygen species are key intermediates that are frequently observed in the catalytic cycles of dioxygen activation by metalloenzymes and their biomimetic compounds. In this work, a side‐on cobalt(III)–peroxo complex bearing a macrocyclic N‐tetramethylated cyclam (TMC) ligand, [Co^III(15‐TMC)(O₂)]⁺, was synthesized and characterized with various spectroscopic methods. Upon protonation, this cobalt(III)–peroxo complex was cleanly converted into an end‐on cobalt(III)–hydroperoxo complex, [Co^III(15‐TMC)(OOH)]²⁺. The cobalt(III)–hydroperoxo complex was further converted to [Co^III(15‐TMC‐CH₂‐O)]²⁺ by hydroxylation of a methyl group of the 15‐TMC ligand. Kinetic studies and ¹⁸O‐labeling experiments proposed that the aliphatic hydroxylation occurred via a Co^IV–oxo (or Co^III–oxyl) species, which was formed by O? O bond homolysis of the cobalt(III)–hydroperoxo complex. In conclusion, we have shown the synthesis, structural and spectroscopic characterization, and reactivities of mononuclear cobalt complexes with peroxo, hydroperoxo, and oxo ligands.     

Structural insights into nonheme alkylperoxoiron(III) and oxoiron(IV) intermediates by X-ray absorption spectroscopy

Transient mononuclear low-spin alkylperoxoiron(III) and oxoiron(IV) complexes that are relevant to the activation of dioxygen by nonheme iron enzymes have been generated from synthetic iron(II) complexes of neutral tetradentate (TPA) and pentadentate (N4Py, Bn-TPEN) ligands and structurally characterized by means of Fe K-edge X-ray absorption spectroscopy (XAS). Notable features obtained from fits of the EXAFS region are Fe-O bond lengths of 1.78 A for the alkylperoxoiron(III) intermediates and 1.65-1.68 A for the oxoiron(IV) intermediates, reflecting different strengths in the Fe-O pi interactions. These differences are also observed in the intensities of the 1s-to-3d transitions in the XANES region, which increase from 4 units for the nearly octahedral iron(II) precursor to 9-15 units for the alkylperoxoiron(III) intermediates to 25-29 units for the oxoiron(IV) species.     

Unusual reactivity of methylene group adjacent to pyridine-2-carboxamido moiety in iron(III) and cobalt(III) complexes

The Fe(III) and Co(III) complexes of the ligand N-(2-picolyl)picolinamide (pmpH; H represents the dissociable amide hydrogen), namely, [Fe(pmp)(2)]BF(4) (1) and [Co(pmp)(2)]ClO(4) (2), have been synthesized and structurally characterized. The [bond]CH(2)[bond] moiety of pmp(-) in [M(pmp)(2)](+) (M = Fe, Co) is very reactive and is readily converted to carbonyl (C[double bond]O) group upon exposure to dioxygen. Such conversion results in [M(bpca)(2)]ClO(4) complexes (M = Fe (3), Co (5); bpcaH = bis(2-pyridylcarbonyl)amine) which have been characterized by spectroscopy and X-ray diffraction. The structure of 5 is reported here for the first time. The reactivity of the [bond]CH(2)[bond] moiety of pmp(-) has so far precluded the isolation of 1 although other metal complexes of pmp(-) have been reported years ago. The CH(2) --> C[double bond]O transformation arises from the tendency of the coordinated pmp(-) ligand to achieve further conjugation in the ligand framework and provides a better way to synthesize the metal complexes of bpcaH ligand. Reaction of 3 with NaH affords Fe(II) complex [Fe(bpca)(2)] (4) without any reduction of the ligand frame.     

Basic ancillary ligands promote O-O bond formation in iridium-catalyzed water oxidation: a DFT study

The cationic iridium complex [Ir(OH(2))(2)(phpy)(2)](+) (phpy = o-phenylpyridine) is among the most efficient mononuclear catalysts for water oxidation. The postulated active species is the oxo complex [Ir(O)(X)(phpy)(2)](n), with X = OH(2) (n = +1), OH(-) (n = 0) or O(2-) (n = -1), depending on the pH. The reactivity of these species has been studied computationally at the DFT(B3LYP) level. The three [Ir(O)(X)(phpy)(2)](n) complexes have an electrophilic Ir(v)-oxo moiety, which yields an O-O bond by undergoing a nucleophilic attack of water in the critical step of the mechanism. In this step, water transfers one proton to either the Ir(V)-oxo moiety or the ancillary X ligand. Five different reaction pathways associated with this acid/base mechanism have been characterized. The calculations show that the proton is preferably accepted by the X ligand, which plays a key role in the reaction. The higher the basicity of X, the lower the energy barrier associated with O-O bond formation. The anionic species, [Ir(O)(2)(phpy)(2)](-), which has the less electrophilic Ir(V)-oxo moiety but the most basic X ligand, promotes O-O bond formation through the lowest energy barrier, 14.5 kcal mol(-1). The other two active species, [Ir(O)(OH)(phpy)(2)] and [Ir(O)(OH(2))(phpy)(2)](+), which have more electrophilic Ir(V)-oxo moieties but less basic X ligands, involve higher energy barriers, 20.2 kcal mol(-1) and 25.9 kcal mol(-1), respectively. These results are in good agreement with experiments showing important pH effects in similar catalytic systems. The theoretical insight given by the present study can be useful in the design of more efficient water oxidation catalysts. The catalytic activity may increase by using ligand scaffolds bearing internal bases.