A novel polymer dispersed liquid crystal film prepared by reversible addition fragmentation chain transfer polymerization

Polymer as an important component of polymer dispersed liquid crystal (PDLC) has a great influence on electro-optical properties. In this letter, the effect of molecular weight of polymer matrix on the electro-optical properties of PDLC films was investigated with reversible addition fragmentation transfer (RAFT) polymerization. It was found that the saturation voltage and memory effect were apparently influenced by molecular weight of polymer which can be regulated efficiently by irradiation time, while the morphology of liquid crystal droplets kept unaltered. It was estimated that the increase of molecular weight of polymer enhanced entanglement between polymer and liquid crystal, which induced the different surface interaction and electro-optical properties.     

UV tuning of the electro-optical and morphology properties in polymer-dispersed liquid crystals

Polymer-dispersed liquid crystal (PDLC) films operating in reverse mode are transparent electro-optical devices, which can be turned into an opaque state by application of a suitable electric field. The effect was investigated of different UV powers, used during the polymerization process, on the electro-optical and morphology properties of PDLCs, working in reverse mode operation. Films were obtained by UV polymerization of mixtures of a low molecular weight nematic liquid crystal and a photopolymerizable liquid crystal monomer, homeotropically aligned by rough conductive surfaces. The electro-optical and morphology properties of samples were related to the polymerization conditions. Samples polymerized by lower UV powers exhibited “polymer ball” morphology and an electro-optical response due to the liquid crystal director reorientation, whereas samples obtained at higher UV powers showed a “Swiss cheese” morphology and an electro-optical response due to dynamic scattering. In addition, we observed by conductivity and IR measurements that UV exposure induces a degradation of the nematic liquid crystal.     

The electro-optical properties of 'charged' PDLCs

The application of high intensity electric fields to polymer dispersed liquid crystal (PDLC) films can induce changes in their electro-optical properties and morphology. In particular, a quasilinear electro-optical response to an external electric field can be achieved if an internal built-in d.c. field is induced. In this work, we show how the liquid crystal/polymer weight ratio influences the electro-optical response of 'charged' PDLCs, i.e. of PDLC films after the application of a high intensity electric field. We observed that a quasilinear electro-optical response can be achieved in a well determined range of composition. Larger liquid crystal concentrations are unable to maintain the built-in field, while PDLCs with lower liquid crystal loadings do not allow the onset of a built-in d.c. field.     

Morphology and electro-optical properties of reverse mode polymer dispersed liquid crystals

We have investigated the morphology and electro-optical properties of reverse mode polymer dispersed liquid crystals as a function of liquid crystal loading. Reverse mode shutters have been obtained by a polymerization-induced phase separation of mixtures, consisting of a liquid crystalline monomer and a non-reactive nematic liquid crystal, placed between rough conductive surfaces. Such surfaces are able to keep the photopolymerizable mixtures homeotropically aligned without the use of any aligning polymer substrate. OFF state transmittances are always larger than 80% and the switching fields decrease if the non-reactive liquid crystal percentage is increased. Both rise and decay times are always lower than 10 ms. The electro-optical properties have been related to the sample morphology and a simple mode is proposed.     

A study on the polymer structures and electro-optical properties of epoxy-mercaptan-based polymer dispersed liquid crystal films

ABSTRACT

In this paper, polymer dispersed liquid crystal (PDLC) films based on epoxy-mercaptan system were prepared by thermal-initiated polymerization. The effects of the liquid crystal (LC) content, the proportion and the functionality of epoxy monomers on the polymer structures and electro-optical properties of the as-made PDLC films were investigated systematically. It was found that the morphologies of the polymer matrix can be altered from polymer meshes to polymer balls by increasing the LC content as well as the functionality of epoxy monomers. Accordingly, the electro-optical properties could be regulated by the morphologies of polymer networks. Especially, the as-made PDLC films with homogeneous porous structures exhibited the optimal electro-optical properties. Consequently, this work offers a meaningful approach to control the microstructures and optimize the electro-optical properties of PDLC films, which indeed can form a wonderful footstone for the wide application of PDLC.     

Morphology and electro-optical properties of reverse mode polymer dispersed liquid crystals

We have investigated the morphology and electro-optical properties of reverse mode polymer dispersed liquid crystals as a function of liquid crystal loading. Reverse mode shutters have been obtained by a polymerization-induced phase separation of mixtures, consisting of a liquid crystalline monomer and a non-reactive nematic liquid crystal, placed between rough conductive surfaces. Such surfaces are able to keep the photopolymerizable mixtures homeotropically aligned without the use of any aligning polymer substrate. OFF state transmittances are always larger than 80% and the switching fields decrease if the non-reactive liquid crystal percentage is increased. Both rise and decay times are always lower than 10 ms. The electro-optical properties have been related to the sample morphology and a simple mode is proposed.     

Linear and non-linear liquid crystal materials, electro-optical effects and surface interactions. Their application in present and future devices

The structural, material and electro-optical properties of novel, halogenated nematic liquid crystals which contain quite different functional groups are correlated. Synergisms which lead to broad mesophases, low viscosities and large dielectric anisotropies further improve the performance of actively and passively addressed, high information content liquid crystal displays. Some recent developments, such as operation of supertwisted nematic displays with not only linear, but also circularly polarized light, are included. A recently presented, efficient liquid crystal colour projection concept, whose functional elements, i.e. polarizers, filters and modulators, consist entirely of liquid crystal devices, is reviewed. Its circular polarizers and filters are made up of novel, negative dielectric anisotropic cholesteric liquid crystals designed such that, dislocation-free, optically uniform, planar textures result from electric field alignment. Novel, non-linear optical ferroelectric liquid crystals which exhibit very large and stable second order harmonic coefficients d₂₂ = 5 pm V^-1 have the potential to be used in integrated optical devices, such as frequency converters and Pockels modulators. Photopolymerization of polymer-coated substrates with linearly polarized light is shown to induce anisotropic, uniaxial orientation of the polymer side chains without mechanical treatment. The resulting anisotropic dispersive surface interaction forces align adjacent liquid crystal molecules parallel. This new, photoinduced liquid crystal aligning technique renders the generation of azimuthal director patterns possible. It opens up interesting possibilities for realizing new optical and electro-optical devices, including hybrid and stereo liquid crystal displays.     

Polymer Membranes Dispersed Liquid Crystal (PMDLC): a new electro-optical device

Polymer Dispersed Liquid Crystals (PDLCs) are liquid crystal dispersions in a polymer matrix, which look like opaque in their OFF state, when no electric field is applied, and transparent in their ON state. They are generally obtained by a phase separation process, such as Thermal, Solvent- and Polymerization-Induced Phase Separation (TIPS, SIPS and PIPS, respectively), between two transparent conductive glass substrates. In this paper, a new electro-optical device, formed by a porous polymer membrane imbibed with liquid crystal by capillary suction, is presented (Polymer Membranes Dispersed Liquid Crystals, PMDLC). Polymer membrane surfaces were made conductive before liquid crystal loading by magnetron sputtering of a thin layer of conductive indium tin oxide. The morphology and the electro-optical response of these devices were investigated and the observed transmittances and relaxation times were found to be similar to those of conventional PDLCs. In addition, PMDLCs showed interesting flexibility as no solid conductive substrate is required and economic convenience as there is no loss of liquid crystal in the polymer matrix.     

Calorimetric studies of poly (2-phenoxyethylacrylate)/5CB mixtures

The thermophysical properties of mixtures of poly (2-phenoxyethylacrylate) and 4-cyano-4'-pentyl-biphenyl, 5CB, are investigated using polarizing optical microscopy (POM) and differential scanning calorimetry (DSC). The polymer has a molar mass M w = 181 000 g mol -1 ; the low molecular mass liquid crystal exhibits a nematic to isotropic transition at 35.3°C and crystallizes below 23°C. The phase diagram exhibits miscibility gaps in certain regions of temperature and composition where coexisting nematic and isotropic phases are found. From a practical point of view when considering the electro-optical applications of these systems, it proves to be useful to know precisely the amount of small liquid crystal molecules dissolved in the polymer matrix and the concentration of polymer in the nematic phase. The former quantity has a mechanical impact due to a plasticizing effect, an optical impact since it changes the polymer refractive index, while the polymer in the nematic phase shifts the transition temperatures influencing the electro-optical response of the liquid crystal. The present work addresses these important aspects using POM and DSC.     

Restricted polymer-stabilised electrically suppressed helix ferroelectric liquid crystals

The electrically suppressed helix ferroelectric liquid crystal (ESHFLC) electro-optical mode is characterised by the high contrast and fast response time at low driving voltage. However, the ESHFLC demands several constraints on the alignment layer and the cell gap. However, due to the fundamental characteristics of the ferroelectric liquid crystals, the cone angle decreases at higher temperatures, which is the biggest hurdle for this electro-optical mode to find the real application. In this article, we disclose a restricted polymer stabilisation (with very small polymer concentration in the mixture) for the ESHFLC without pushing other vital parameters out of the range of the constraints for ESHFLCs. The restricted polymer-stabilised ESHFLC shows large temperature range with stable high contrast, fast response time and low driving voltage, thus, it could find application in a range of the modern display and photonic devices.     

Helical unwinding in polymer-dispersed ferroelectric liquid crystals

We demonstrate that ferroelectric liquid crystals dispersed in a polymer matrix can form uniaxially aligned elliptical droplets. The alignment is controlled by mechanical shear during the polymerization of a UV-curable adhesive. The possibility of prealignment makes polymer-dispersed ferroelectric liquid crystals suitable for application in flexible electro-optical displays. In contrast to surface stabilized ferroelectric liquid crystal displays, the electro-optical effect in our system is due to the deformed-helix ferroelectric (DHF) effect.     

The electro-optical response of nematic emulsions

Switchable nematic emulsions are micron-sized droplets of nematic liquid crystal, floating in isotropic fluid matrices. Such droplets can be switched from an opaque (off) to a transparent (on) state by application of very low electric fields. It is known that the electro-optical properties of liquid crystal dispersions are affected by several parameters, including the liquid crystal loading. The electro-optical response of nematic emulsions has been investigated as a function of liquid crystal weight percentage. Almost transparent films with a reduced contrast ratio are obtained with lower liquid crystal contents. A macroscopic phase separation is observed when liquid crystal content exceeds 45 wt %. On the contrary, large contrast ratios and very low switching fields can be obtained if liquid crystal ranges from 25 to 35 wt %. Consequently, nematic emulsions prepared in this liquid crystal range can be used as promising systems for electro-optical applications. In addition to technological developments, these results can help computational and basic studies of phase separation in novel multiphase liquid crystalline materials.     

Calorimetric studies of poly (2-phenoxyethylacrylate)/5CB mixtures

The thermophysical properties of mixtures of poly (2-phenoxyethylacrylate) and 4-cyano-4′-pentyl-biphenyl, 5CB, are investigated using polarizing optical microscopy (POM) and differential scanning calorimetry (DSC). The polymer has a molar mass M _w = 181 000 g mol ^-1 the low molecular mass liquid crystal exhibits a nematic to isotropic transition at 35.3°C and crystallizes below 23°C. The phase diagram exhibits miscibility gaps in certain regions of temperature and composition where coexisting nematic and isotropic phases are found. From a practical point of view when considering the electro-optical applications of these systems, it proves to be useful to know precisely the amount of small liquid crystal molecules dissolved in the polymer matrix and the concentration of polymer in the nematic phase. The former quantity has a mechanical impact due to a plasticizing effect, an optical impact since it changes the polymer refractive index, while the polymer in the nematic phase shifts the transition temperatures influencing the electro-optical response of the liquid crystal. The present work addresses these important aspects using POM and DSC.     

Unusual electro-optical behaviour of the nematic polyacrylate

ABSTRACT

High sensitivity of liquid crystals to the electric field makes them highly demanded and widely used in different applications. Despite the large number of the electro-optical research on the low-molar-mass liquid crystals electro-optics of the liquid crystalline (LC) polymers is much less studied. Herein, the comparative electro-optical behaviour of two nematic comb-shaped polyacrylates with phenylbenzoate mesogenic side groups was studied in detail. These two polyacrylates have completely the same structure of polymer backbone and spacer length but different in the direction of the ester group in the phenylbenzoate fragments. It was found that this difference predetermines their completely opposite electro-optical properties.

The influence of the electric field of different strength and frequency on the orientation of the mesogenic groups of these polymers is studied. It is shown that application of the electric field at temperatures above the glass transition temperature (~25°C) induces reorientation of the mesogenic groups along or perpendicular to the electric field direction depending in its turn on the ester group direction. For one of the polyacrylates an unusual textural transition is found; during cooling of the polymer sample under applied field at definite temperature a sharp change in the mesogen’s orientation from homeotropic to planar one is found. This electro-optical phenomenon is observed for the first time and probably associated with sharp change in sign of anisotropy of dielectric permittivity from positive (at high temperatures) to negative one (at lower temperatures). Kinetics of the electro-optical switching at different temperatures, influence of the molar masses of the polymer and frequency of the applied AC field on electro-optical behaviour of the polymers are studied. The possibility of the fixation of the electroinduced homeotropic alignment of the mesogenic groups by photopolymerisation of the diacrylate dissolved in the polymer is demonstrated.     

Transitions of bipolar to radial orientation of liquid crystal droplets in amphiphilic system of PDLC film

The orientation order of nanoscale droplets of thermotropic liquid crystals (LCs) suspended in polymer dispersed liquid crystal (PDLC) solutions prepared with different medias (e.g., polymers, surfactants, nonpolar materials like dyes) respond sensitively and differently via molecular interactions. Such a valuable knowledge provides basis for understanding the properties of PDLC devices. Previously, many studies have explored the droplets size, electro-optical property variations in PDLC films by varying the materials types and its compositions. However, the variations in droplet orientation order with respect to material type and composition provide a new class of study in this particular field. The current study explored the transition in droplet orientation from bipolar to radial on varying the amphiphilic block copolymer concentrations. Further, the variations in surface energies of LCs in different series of block copolymer medias were investigated by contact angle measurements.     

Influence of SMA content on the electro-optical properties of polymer-dispersed liquid crystal prepared by monodisperse poly(MMA-co-SMA)/LC microcapsules

Monodisperse poly(methyl methacrylate) (PMMA) particles containing various concentrations of stearyl methacrylate (SMA) were prepared, and a liquid crystal (LC) was swollen into the particles using a solute co-diffusion method (SCM). Phase separation behaviors between the polymer and LC were monitored by utilizing an optical and a polarized microscope (OM/POM). The monodisperse LC microcapsules were then applied to a polymer-dispersed liquid crystal (PDLC), and the electro-optical properties were investigated. As a result, the threshold and driving voltages were improved when the SMA content increased. The long alkyl chains of SMA in the capsules should exist at the interface of the LC and polymer resulting in an enhancement of phase separation between the polymer and LC, which largely influences the electro-optical properties of PDLC.     

Liquid crystal orientation in elliptic droplets in nematic emulsions

Elliptic droplets of nematic liquid crystal dispersed in a fluid organic monomer were obtained by phase separation from an isotropic mixture consisting of an organic monomer and a nematic liquid crystal contained in a poly(ethylene terephthalate) cell with inner surfaces treated with rubbed polyimide. The elliptic shape is a consequence of the constraint upon droplet growth along the direction perpendicular to the cell surfaces owing to the small thickness. Then, the resulting droplets will have a contact area with the inner surfaces of the cell treated with polyimide, which will impart a planar orientation on the liquid crystal in the droplet. By means of an optical microscope, using a simple pin hole of 5 μm, we have selected single droplets for a series of samples having different contact areas. By polarized infrared spectroscopy we have also studied the liquid crystal orientation in selected areas of the droplets. We then report the dependence of the order parameter of the liquid crystal on different contact areas with the alignment surface of the cell. The good degree of planar alignment of the liquid crystal in the elliptic droplets allows the use of such a technique for realizing electro-optical films operating in the reverse mode. We report the electro-optical transmission of reverse mode films with different sizes of elliptic droplet.     

Liquid crystal orientation in elliptic droplets in nematic emulsions

Elliptic droplets of nematic liquid crystal dispersed in a fluid organic monomer were obtained by phase separation from an isotropic mixture consisting of an organic monomer and a nematic liquid crystal contained in a poly(ethylene terephthalate) cell with inner surfaces treated with rubbed polyimide. The elliptic shape is a consequence of the constraint upon droplet growth along the direction perpendicular to the cell surfaces owing to the small thickness. Then, the resulting droplets will have a contact area with the inner surfaces of the cell treated with polyimide, which will impart a planar orientation on the liquid crystal in the droplet. By means of an optical microscope, using a simple pin hole of 5 μ m, we have selected single droplets for a series of samples having different contact areas. By polarized infrared spectroscopy we have also studied the liquid crystal orientation in selected areas of the droplets. We then report the dependence of the order parameter of the liquid crystal on different contact areas with the alignment surface of the cell. The good degree of planar alignment of the liquid crystal in the elliptic droplets allows the use of such a technique for realizing electro-optical films operating in the reverse mode. We report the electro-optical transmission of reverse mode films with different sizes of elliptic droplet.     

Shear flow characterization of blends containing liquid crystal polymers

A simple phenomenological approach is proposed in order to predict the presence of minima in the viscosity-composition curves of blends of thermoplastic with liquid crystal polymer (LCP). When the viscosity of the liquid crystal polymer is larger than that of the thermoplastic matrix, a minimum is observed. A possible explanation of the presence of yield stress in the flow curves of these blends is also given.     

紫外光固化PDLC膜的形态及电光性能

选用紫外光固化法制备了聚合物分散液晶（ＰＤＬＣ）膜，以ＳＬＭ方法对其形态结构进行了考察，进而测试了ＰＤＬＣ的电光性能，并讨论了性能与结构的关系。