Reversible charging of the ice-water interface. II. Estimation of equilibrium parameters

Equilibrium parameters characterizing the ice-water interface were obtained from electrokinetic and potentiometric data. The dependency of surface potential on pH was measured by the ice electrode. Electrokinetic zeta potentials were measured by electrophoresis. In the interpretation, the 1-pK and 2-pK concepts of the surface complexation model, developed for metal oxides, were used. The equilibrium parameters (constants of surface reactions) were determined. The results were confirmed by numerical simulations. Both 1-pK and 2-pK models fit the experimental data well.     

2D-NMR测定人参皂苷Rb~1溶液中的三维空间结构

本文用一维和二维NMR归属了人参皂苷Rb~1的质子化学位移, 测定了质子偶合常数, 并用相敏NOESY谱测定了分子中质子间的距离。以所测定的化学位移, 偶合常数和质子间距等NMR结构参数为初始数据, 用自编和改进的分子结构计算程序计算出人参皂苷Rb~1在溶液中的三维空间结构。     

Measurement of residual stresses in polymeric parts by indentation method

An indentation method was studied as a means of measuring the residual stress in an injection molded polymeric specimen because destructive methods restrict the reuse of measured parts and it is not possible to apply them to small and complicated parts. The load-displacement curve was measured for indentation at stressed and non-stressed positions. Residual stress distribution of the injection molded part was calculated by comparing the load-displacement curve results with respect to the indentation depth. The residual stresses measured by the indentation method were reliable because they were in good agreement with numerical results and those measured by the hole drilling method. The indentation method can be utilized to measure the residual stresses in polymeric parts for practical applications, particularly for small or complicated parts.     

Direct measurement of surface complex loading and surface dipole and their effect on simple device behavior

Tin complexes of phenoxide ligands having a range of dipole moments were prepared on the surface of indium-tin oxide (ITO). Surface complex loadings and stoichiometries were measured by quartz crystal microgravimetry. Work functions of ITO substrates treated with these various surface complexes were measured using a Kelvin probe. Surface complex dipole moments were then calculated based on measured surface loadings. Changes in the ITO work function effected by surface phenoxide complex introduction correlate with these surface complex dipole moments and with total surface dipole per unit area, and current densities in simple hole-only diode devices also correlate with these total surface dipoles.     

Measurement of physical strength of pharmaceutical extruded pellets

This paper describes a novel and simple method for measuring the physical strength of pharmaceutical pellets prepared by extrusion granulation. Pharmaceutical powders composed of lactose, cornstarch, and microcrystalline cellulose were kneaded with purified water and dry binder (hydroxypropylcellulose), then extruded through a dome-type extrusion granulator. The physical strength of the dried extruded pellets was measured with a novel system: pellets and grinding alumina media were both fed into a ball mill pot and then "grinding degree" was measured as defined by the ground fine powder fraction after being rotated in the pot. The grinding conditions such as grinding time and number of alumina balls were optimized. The measured physical strength and pellet strength measured with a typical strength tester was compared. Quantitative relationships between the strength and the physical properties of the pellets such as friability and disintegration time were also investigated. It was found that the newly developed system could easily and accurately evaluate the physical strength of extruded pellets and could also predict the various physical properties.     

Zeta potentials of polydimethylsiloxane surfaces modified by polybrene of different concentrations

Zeta potential is an important parameter for characterizing the electrokinetic properties of a solid–liquid interface. In this paper, zeta potentials of polydimethylsiloxane surfaces modified by polybrene (PB) solutions of different concentrations in Phosphate buffer solution and pure water were reported. The zeta potentials were measured by an induction current method. The measurements were validated both by a calibration curve based on the data reported in the published papers and by comparing the zeta potential determined by using the Smoluchowski equation and the measured velocity of the electrokinetic motion of particles in a microchannel.     

Characterization of poly(lactic acid) by size exclusion chromatography, differential refractometry, light scattering and thermal analysis

A number of experimental techniques are employed to characterize physical and thermal properties of poly(lactic acid), PLA. To characterize PLA in terms of molecular mass and molecular mass distribution, size exclusion chromatography was used. The value of the specific refractive index increment was measured by differential refractometry. The thermal properties of semicrystalline PLA were measured by standard and temperature-modulated differential scanning calorimetry. The thermal stability of PLA was monitored by measuring the changes of mass using thermogravimetric analysis. The mechanical properties of amorphous PLA were measured by dynamic mechanical analysis and the results were discussed and compared with DSC in the glass transition region.     

微柱液相色谱和电化学检测法测定鼠脑微透析液中神经传递物质

报道了使用微柱色谱和电化学检测器测定鼠脑微透析液中神经传递物质的方法。儿茶酚胺，５－羟色胺和代谢物的检测限为 ０． １～０． ５ ｐｇ。含有乙酰胆碱酯酶和胆碱氧化酶的柱后反应器使分离后的乙酰胆碱和胆碱转化成过氧化氢．再用铂电极或过氧化物酶修饰过的玻碳电极检测过氧化氢。乙酰胆碱的检测限当使用怕电极时是５０× １０－１５ｍｏｌ，当使用酶修饰电极时是１０×１０－１５ｍｏｌ。     

Cross sections of barium isotopes in the interaction of 60 MeV/nucleon 18O with 238U

Barium isotopes were produced by 60 MeV/u ¹⁸O ion bombardment of natural uranium via ²³⁸U (¹⁸O, X) reactions. Ba sources were prepared by radiochemical separation, and measured by a HPGe detector. The cumulative cross sections were obtained by analysis of measured time sequence g-ray spectra. A double peak phenomenon in Ba isotope distribution was observed.     

Dependence of the volume and viscosity of naphthalene-ethanol-octane solutions on composition at 298 K

The solubility of naphthalene in ethanol-octane mixtures was measured by the isothermal saturation method. The solution densities were determined and the partial and apparent molar volumes of naphthalene were calculated. The viscosity was measured with an Ubbelohde viscosimeter with a suspended level. All measurements were performed at 298.15 K. The results were discussed based on interactions in solution.     

Measurement of initial translational energies of peptide ions in laser desorption/ionization mass spectrometry

The initial kinetic energy distribution of [Arg]-vasopressin molecular ions generated by matrix-assisted UV laser desorption/ionization was measured using a delayed ion extraction, linear time-of-flight mass spectrometer. Energy distributions of the nicotinic acid matrix ions, with or without the presence of peptide, were also measured. These were compared with the kinetic energy distribution of gramicidin-S ions using IR laser desorption. The measured molecular ion kinetic energy distribution from vasopressin is much broader than that from gramicidin-S, and is characterized by a high-energy tail that most likely results from entrainment of anlayte ions in the higher velocity matrix ions and fragments as they leave the surface.     

Adhesion forces in liquid media: effect of surface topography and wettability

This work was motivated by the unexpected values of adhesion forces measured between an atomic force microscopy tip and the hydrophobic surface of ultra-high-molecular-weight polyethylene. Two types of samples with different roughness but similar wettability were tested. Adhesion forces of similar magnitude were obtained in air and in polar liquids (water and Hank's Balanced Salt Solution, a saline solution) with the rougher sample. In contrast, the adhesion forces measured on the smoother sample in air were much higher than those measured in water or in the aqueous solution. Those experimental results suggested the presence of nanobubbles at the interface between the rough sample and the polar liquids. The existence of the nanobubbles was further confirmed by the images of the interface obtained in noncontact tapping mode. The adhesion forces measured in a nonpolar liquid (hexadecane) were small and of the same order of magnitude for both samples and their values were in good agreement with the predictions of the London-Hamaker approach for the van der Waals interactions. Finally, we correlate the appearance of nanobubbles with surface topography. The conclusion of this work is that adhesion forces measured in aqueous media may be strongly affected by the presence of nanobubbles if the surface presents topographical accidents.     

铂、钌共修饰碳纳米管电极的制备及对甲醇的电催化氧化

碳纳米管以其独特的结构,良好的电性能和机械性能吸引了众多的关注~([1]),被认为是潜在的异相催化剂载体 ~([2]).近来关于碳纳米管负载催化剂的合成及其在异相催化中应用的研究已见报道~([3]).     

Proton affinities of polyglycines assessed by using the kinetic method

The proton affinities of a series of peptides, chosen to show the effects of chain length, were measured by the kinetic method using amines as standard reference bases. Proton affinities of polyglycines with residues ranging from 2 to 10 were measured and the values were found to increase as the number of residues increases.     

Applicability of the transient plane source method to measure the thermal conductivity of low‐density polyethylene foams

The thermal conductivity at constant pressure of a collection of crosslinked, closed‐cell polyethylene foams were measured at room temperature with the transient plane source (TPS) method. The experimental results were compared with those determined by a standard steady‐state technique. The results showed that the values measured by the TPS method follow the same trends as those measured by a heat‐flow meter. Therefore, with the TPS technique it is possible to observe the influence of structural characteristics such as cell size, black carbon content in foams, density, and so forth on thermal conductivity. However, the values obtained by the transient method were approximately 20% higher than those given by the standard method. Possible reasons for these variations are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1226–1234, 2004     

Prediction of human serum albumin-drug binding affinity without albumin

A new liquid chromatographic system was developed to measure protein-drug binding affinity indirectly without albumin and was evaluated using log nK values of drugs measured by a modified Hummel-Dreyer method using purified human serum albumin. The retention factors of acidic and basic drugs were measured by reversed-phase and ion-exchange liquid chromatography in sodium phosphate buffer, pH 7.40, containing 50 vol.% methanol at 37 °C. The bonded phases were pentyl, guanidino and carboxyl phases. The combined retention factors were correlated with the log nK values measured by a modified Hummel-Dreyer method because glycosylation of human serum albumin did not significantly affect log nK value. The correlation coefficients were 0.949 (n=7) for acidic drugs and 0.978 (n=5) for basic drugs. The log nK values of 26 acidic and 18 basic drugs were predicted from their retention factors measured by reversed-phase and ion-exchange liquid chromatography.     

Isopiestic Determination of Water Activity on the System LiNO<Subscript>3</Subscript>+KNO<Subscript>3</Subscript>+H<Subscript>2</Subscript>O at 273.1 and 298.1 K

Water activities in the ternary LiNO₃+KNO₃+H₂O system and its sub-binary systems have been measured by the isopiestic method at 273.1 and 298.1 K. The measured results were treated by a Pitzer-Simonson-Clegg thermodynamic model, from which the predicted solubility isotherms were compared with the experimental results. Based on this comparison, the reliability of the measured results was discussed. The measured results help in predicting the phase diagram of the ternary system, as well as other multi-component systems based on the ternary system.     

水质COD、DO测试结果可信度的未确知数分析方法

水质COD、DO测试易受各种主、客观因素影响，其测试结果是一具有可信度的未确知数。为确保测试结果能正确反映所测COD、DO实际情况，进行测试结果的可信度分析显得尤为重要；为此，本文将未确知数理论运算应用于水质COD、DO测试结果的可信度分析，以确保测试结果的可靠性。经理论分析和实际测试表明，该法较好地评判水中COD、DO测试结果以及相应于结果的可信度，可推广应用于水质分析。     

Cyclic imides. 16. Hydroxy and methoxy derivatives of aminophthalimide and phthalhydrazide

Treatment of N-alkyl derivatives of 3,6-dichlorophthalimide and 4,5-dichlorophthalimide with potassium nitrite gave 3-hydroxy-6-nitro- and 4-hydroxy-5-nitrophthalimides. The potassium salts of these phenols were alkylated by dialkyl sulfates. The products were reduced to the 3-amino-6-alkoxy- and 4-amino-5-alkoxyphthalimides, and the fluorescence emission spectra of these products were measured. Hydrazinolysis of the phthalimides in a toluene medium gave phthalhydrazides. The luminescence spectra of several aminophthalhydrazides were measured. The infrared and proton magnetic resonance spectra of these and of some nitrophthalhydrazides were measured and aspects of these spectra characteristic of phthalhydrazides were identified.     

Heats and entropies of fusion of linear aliphatic polyesters. I. Experimental determinations

Poly(ethylene adipate), poly(ethylene suberate), and poly(ethylene sebacate) were synthesized by a modified ester interchange procedure. Polydispersity was reduced and low molecular weight material removed by fractional crystallization. Samples of 50–60% crystallinity were prepared by bulk crystallization and annealing. Melting points and amorphous densities were obtained by dilatometry. Melting points were 7–12°C higher than previously reported. Heats of fusion were measured by differential scanning calorimetry and extrapolated to 100% crystallinity by using measured amorphous densities and recently redetermined crystalline densities. Entropies of fusion were calculated and separated for the first time into volume expansion and conformational contributions.