全氟辛酸钠与十二烷基三甲基溴化铵混合胶束微环境性质的NMR,ESR研究

应用表面张力法、NMR法和ESR法研究了全氟辛酸钠(SPFO)-十二烷基三甲基溴化铵(DTAB)混合体系水溶液胶束形成及混合胶束的微环境性质(微观粘度、微观极性等)。结果表明, 碳氟表面活性剂碳氟链和碳氢表面活性剂碳氢链之间具有强烈的相互作用, DTAB与SPFO在水溶液中形成混合胶束。DTAB与SPFO混合体系的表面活性高于单一的DTAB或SPFO, 混合体系cmc较单一的DTAB和SPFO低。DTAB与SPFO混合胶束的微观粘度较DTAB胶束的大, 而微观极性较DTAB的小。     

Effect of cationic surfactants on the interaction between sodium perfluorooctanoate and beta-lactoglobulin

The interaction between the fluorocarbon surfactant, sodium perfluorooctanoate (SPFO), and beta-lactoglobulin (BLG) was studied. In particular, the effects of cationic surfactants, such as alkyltriethylammonium bromide (C(n)NE, n=8, 10, 12), on SPFO-BLG interaction were examined. It was shown that the anionic fluorocarbon surfactant, SPFO, was a strong denaturant of BLG. The ability of SPFO to denature BLG could be weakened by the addition of C(n)NE. The effect of C(n)NE on SPFO-BLG interaction was related to the hydrocarbon chain length of C(n)NE, and also the molar ratio of the added C(n)NE to the SPFO in SPFO-BLG solutions ([C(n)NE]/[SPFO]). Our findings might provide a way to design surfactant systems that are less denaturing to proteins or tailor the ability of surfactant to denature proteins through the appropriate mixing with other surfactants.     

The aqueous cationic system sodium undecenoate-dodecyltrimethylammonium bromide at low concentration

The aqueous sodium undecenoate (SUD) –dodecyltrimethylammonium bromide (DTAB) catanionic system was studied at low concentration. The system did not precipitate, even at a 1:1 SUD:DTAB proportion, but showed the formation of a coacervate in a range of surfactant mixture compositions. Micelles have a preferential composition of 0.37 mole fraction of SUD. This behavior is attributed to the presence of the double bond at the distal extreme of the SUD molecule, which can form hydrogen bonds with water. Consequently, the –CH=CH₂ group is situated at the interface between the hydrocarbon micelle core and water, reducing the interfacial free energy. Structural computations demonstrate that the mentioned SUD proportion produces complete coverage of the micelle surface by the double bonds.     

Miscibility of sodium dodecyl sulfate and sodium decyl sulfate in the adsorbed film and micelle

The interfacial tension of the aqueous solution of sodium dodecyl sulfate (SDS) and sodium decyl sulfate (SDeS) mixture against hexane was measured as a function of the total molality and composition of the surfactant mixture at 298.15 K under atmospheric pressure. The compositions of adsorbed film and micelle were evaluated numerically by applying the thermodynamic relations to the experimental results. These results were shown in the form of the phase diagrams of adsorption and micelle formation and compared with those of the aqueous solution of sodium perfluorooctanoate (SPFO) and SDeS mixture. It was found that the diagrams of SDS and SDeS system have swollen cigar shapes and are quite different from those of SPFO and SDeS system which show non-ideal mixing both in the adsorbed film and micelle. This finding was attributed to the fact that the interaction between fluorocarbon and hydrocarbon chains is weaker than that between hydrocarbon chains.     

Prediction of conformational characteristics and micellar solution properties of fluorocarbon surfactants

A molecular-thermodynamic theory is developed to model the micellization of fluorocarbon surfactants in aqueous solutions, by combining a molecular model that evaluates the free energy of micellization of fluorocarbon surfactant micelles with a previously developed thermodynamic framework describing the free energy of the micellar solution. In the molecular model of micellization developed, a single-chain mean-field theory is combined with an appropriate rotational isomeric state model of fluorocarbon chains to describe the packing of the fluorocarbon surfactant tails inside the micelle core. Utilizing this single-chain mean-field theory, the packing free energies of fluorocarbon surfactants are evaluated and compared with those of their hydrocarbon analogues. We find that the greater rigidity of the fluorocarbon chain promotes its packing in micellar aggregates of low curvatures, such as bilayers. In addition, the mean-field approach is utilized to predict the average conformational characteristics (specifically, the bond order parameters) of fluorocarbon and hydrocarbon surfactant tails within the micelle core, and the predictions are found to agree well with the available experimental results. The electrostatic effects in fluorocarbon ionic surfactant micelles are modeled by allowing for counterion binding onto the charged micelle surface, which accounts explicitly for the effect of the counterion type on the micellar solution properties. In addition, a theoretical formulation is developed to evaluate the free energy of micellization and the size distribution of finite disklike micelles, which often form in the case of fluorocarbon surfactants. We find that, compared to their hydrocarbon analogues, fluorocarbon surfactants exhibit a greater tendency to form cylindrical or disklike micelles, as a result of their larger molecular volume as well as due to the greater conformational rigidity of the fluorocarbon tails. The molecular-thermodynamic theory developed is then applied to several ionic fluorocarbon surfactant-electrolyte systems, including perfluoroalkanoates and perfluorosulfonates with added LiCl or NH(4)Cl, and various micellar solution properties, including critical micelle concentrations (cmc's), optimal micelle shapes, and average micelle aggregation numbers, are predicted. The predicted micellar solution properties agree reasonably well with the available experimental results.     

卵清蛋白与离子型表面活性剂的相互作用

本文通过荧光光谱法、紫外-可见吸收光谱法和透射电镜并结合电导率测定分别研究了水中卵清蛋白与阴离子表面活性剂十二烷基硫酸钠（SDS）和阳离子表面活性剂十二烷基三甲基溴化铵（DTAB）和十六烷基三甲基溴化铵（CTAB）之间的相互作用。研究结果表明卵清蛋白可以增加SDS和CTAB的临界胶束浓度,但对DTAB的临界胶束浓度没有影响。阴离子表面活性剂可以使卵清蛋白构象完全伸展,而阳离子表面活性剂却不具备此种作用。表面活性剂单体与卵清蛋白的相互作用强于表面活性剂胶束与卵清蛋白的相互作用。     

MICELLE FORMATION BY ANIONIC AND CATIONIC SURFACTANTS IN AQUEOUS 18-CROWN-6 ETHER,P-CYCLODEXTRIN,AND 1,10-PHENANTHROLINE SOLUTIONS AT DIFFERENT TEMPERATURES

The conductances of sodium perfluorooctanoate (SPFO), sodium dodecylsulphate (SDS), dodecyltrimethylammonium bromide (DTAB), and tetradecyltrimethylammonium bromide (TTAB) in 18-crown-6 ether + water (CR+W), p-cyclodextrin + water (CY+W), and 1,10-phenanthroIine + water (Phen+W) mixtures with fixed 4 mM of each additive were determined over the temperature range of 5-55 °C. The conductivity plots for all the surfactants showed single break from which the critical micellization concentration (cmc) and degree of micelle ionization (x) were computed. From the pre and the post micellar slopes of the conductivity curves, the equivalent conductivities of the monomeric (Aass) and the micellar states (Amjc), respectively, were calculated and discussed with respect to the surfactant-additive complexation. It was observed that the micelle formation of all the ionic surfactants irrespective of the nature of their head groups were delayed in CYC+W in comparison to that in CR+W and Phen+W systems over the temperature range studied. The micelle formation of SPFO and SDS in CR+W and Phen+W systems showed stabilization of the respective micelles due to the adsorption of Na⁺-CR and Na+-Phen complexes at the micelle solution interface in comparison to that of DTAB and TTAB.     

Nonideal mixing of dodecyltrimethylammonium halides and nonionic surfactant in adsorbed films and micelles

The ion–dipole interaction between dodecyltrimethylammonium cations and nonionic surfactant molecules in adsorbed films and micelles was investigated by concentrating on the difference in the degree of counterion binding by employing dodecyltrimethylammonium chloride (DTAC)–octyl methyl sulfoxide (OMS) and dodecyltrimethylammonium bromide (DTAB)–OMS mixtures. The phase diagrams of adsorption and micelle formation were constructed and then the nonideal mixing of different species of surfactants was demonstrated in terms of the excess Gibbs free energies of adsorption and micelle formation, and the surface excess areas. Furthermore the dependence of them on the counterion was clearly shown. All these results were found to support our previous view that the direct interaction between surfactant cation and the dipole of the hydrophilic part of a nonionic surfactant is essential in cationic-nonionic surfactant mixtures, i.e., the DTAC system with a lower counterion biding has more negative excess thermodynamic quantities than the DTAB system with a higher one.     

Miscibility of dodecyltrimethylammonium bromide and dodecyltrimethylammonium chloride in surface-adsorbed film and micelle

Surface tension of aqueous solutions of mixtures of dodecyltrimethylammonium bromide (DTAB) and dodecyltrimethylammonium chloride (DTAC) has been measured and analyzed by using thermodynamic relations. The adsorbed film has been found to contain more DTAB molecules than the solution. The shape formed by the curves of the total molality at constant surface tension against the solution and surface compositions indicates the ideal mixing of the DTAB and DTAC molecules in the adsorbed film. Micellar composition has been estimated at the critical micelle concentration (CMC). The micelles have been found to be richer in DTAB than the solution, but poorer in DTAB than the adsorbed film at the CMC. The DTAB and DTAC molecules have been shown to mix ideally in the micelles. From the comparison with the results on the system of decylammonium bromide and decylammonium chloride, it has been concluded that, on the mixing of surfactants differing only in counter ions, the adsorbed film is influenced more significantly by the ionic head group of the surfactant than the micelle.     

Investigation of SDS, DTAB and CTAB micelle microviscosities by electron spin resonance

Electron spin resonance spectroscopy (ESR) of the nitroxide labelled fatty acid probes (5-, 16-doxyl stearic acid) was used to monitor the micelle microviscosity of three surfactants at various concentrations in aqueous solution: sodium dodecyl sulphate (SDS), dodecyltrimethylammonium bromide (DTAB) and cetyltrimethylammonium bromide (CTAB). At low surfactant concentration, there is no micelle, the ESR probe is dissolved in water/surfactant homogeneous phase and gives his microviscosity. At higher surfactant concentration, an abrupt increase in microviscosity indicates the apparition of micelles and, the solubilization of the probes in micelles. The microviscosity of the three surfactants, in a large surfactant range, was obtained as well as the critical micelle concentration (CMC). The microviscosity increased slightly with the increase in surfactant concentration. Phosphate buffer lowered the CMC value and generally increased the microviscosity.     

Salt effect on the complex formation between polyelectrolyte and oppositely charged surfactant in aqueous solution

The complex formation between sodium carboxymethylcellulose (NaCMC) and dodecyltrimethylammonium bromide (DTAB) at various sodium bromide concentrations (C(NaBr)) has been studied by microcalorimetry, turbidimetric titration, steady-state fluorescence measurements, and the fluorescence polarization technique. The addition of salt is found to influence the formation of NaCMC/DTAB complexes markedly. At C(NaBr) = 0.00, 0.01, 0.02, 0.10, and 0.20 M, DTAB monomers form micelle-like aggregates on NaCMC chains to form NaCMC/DTAB complexes above the critical surfactant concentration (C1). At C(NaBr) = 0.23 M, DTAB molecules first form micelles above a 2.46 mM DTAB concentration prompted by the added salt, and then, above C1 = 4.40 mM, these micelles can aggregate with NaCMC chains to form NaCMC/DTAB complexes. However, at C(NaBr) = 0.25 M, there is no NaCMC/DTAB complex formation because of the complete salt screening of the electrostatic attraction between DTAB micelles and NaCMC chains. It is also surprisingly found that the addition of NaBr can bring out a decrease in C1 at C(NaBr) < 0.20 M. Moreover, the addition of NaBr to a mixture of 0.01 g/L NaCMC and 3.6 mM DTAB can directly induce the formation of NaCMC/DTAB complexes. This salt-enhancing effect on the complex formation is explained as the result of competition between the screening of interaction of polyelectrolyte with surfactant and the increasing of polyelectrolyte/surfactant interaction owing to the growth of micelles by added salt. When the increasing of polyelectrolyte/surfactant interaction exceeds the screening of interaction, the complex formation can be enhanced.     

Aggregation behavior of fluorocarbon and hydrocarbon cationic surfactant mixtures: a study of 1H NMR and 19F NMR

The aggregation behavior and the interaction of four mixed systems for a cationic fluorocarbon surfactant, diethanolheptadecafluoro-2-undecanolmethylammonium chloride (DEFUMACl), mixing with cationic hydrocarbon surfactants, alkyltrimethylammonium chloride, CnTACl (n=12, 14, 16, and 18; where n=12 is DTACl, n=14 is TTACl, n=16 is CTACl, and n=18 is OTACl), were studied by 1H and 19F NMR in more detail. The results of 19F NMR measurements strongly indicate that in the three mixed systems of DEFUMACl/DTACl, DEFUMACl/TTACl, and DEFUMACl/CTACl at different molar fractions of fluorocarbon surfactant (alphaF=(cDEFUMACl/cDEFUMACl+cCnTACl)), with an increase of the total concentration of fluorocarbon and hydrocarbon surfactants (cT=cF+cH), the mixed micelles at the first break point and the individual DEFUMACl micelles at the second break point form. However, three different types of micelles were determined in DEFUMACl/OTACl mixtures by 19F NMR measurements, OTACl-rich and DEFUMACl-rich mixed micelles and individual DEFUMACl micelles, respectively. The chemical shifts of proton Deltadelta (1H) for -CH3 in the mixed systems of DEFUMACl/CnTACl (n=12, 14, 16, and 18) have different variation trends from the 19F NMR measurements. For the two systems of DEFUACl/DTACl and DEFUMACl/TTACl, the mixed micelles form at the first break point. At the second break point, for lower alpha F values the DTACl-rich and TTACl-rich mixed micelles form with a strong downfield shift and for higher alpha F values DEFUMACl-rich mixed micelles form with a strong upfield. For the other two systems of DEFUMACl/CTACl and DEFUMAC/OTACl, the chemical shifts of proton Deltadelta (1H) of -CH3 increase with an increase of the total concentration of DEFUMACl/CTACl or OTACl, and mixed CH- and CF-surfactant micelles form. At higher total concentration, the greater effect of fluorinated chains of DEFUMACl on CH-chains was obvious, resulting in the strong upfield chemical shifts. In cationic fluorocarbon and hydrocarbon surfactant mixtures, the different kinds of micelles observed by 19F and 1H NMR measurements could be caused by the increase in alkyl chain length of hydrocarbon surfactants with different critical micelle concentrations. Combining two theoretical models for mixing, for the four different chain-length hydrocarbon surfactants studied, one can conclude that the two components of mixtures interact with each other and form mixed micelles in two completely different ways according to their molecular properties and cmc values in a certain range of total concentrations. One is close to an ideal mixing case with the formation of one type of mixed micelles, such as the DEFUMACl/DTACl and DEFUMACl/TTACl systems. The other is a demixing case with the formation of two types of micelles, i.e., fluorocarbon-rich and hydrocarbon-rich mixed micelles, such as DEFUMACl/CTACl and DEFUMACl/OTACl systems. However, as the total concentrations of the mixed systems are high enough, the four systems tend to demix and to form individual micelles of corresponding components due to the initial respective interaction between fluorocarbon and hydrocarbon chains. That is to say, at high total concentration, the individual DEFUMACl micelles in all four systems could form. These results may be primarily directed toward acquiring an understanding of the mechanism of CF-CH mixtures in aqueous solution and secondarily directed toward providing more detailed information on nonideal mixing.     

Volume behavior of mixed micelles of dodecyltrimethylammonium chloride and bromide

Densities of aqueous solutions of mixtures of dodecyltrimethylammonium chloride (DTAC) and dodecyltrimethylammonium bromide (DTAB) have been measured as a function of total molality at constant composition and the apparent molar volumes of the mixtures were derived from the density data. The partial molar volumes of monomeric surfactant mixtures, the molar volumes of mixed micelles, and the volumes of formation of mixed micelles were evaluated and are compared with those for decyltrimethylammonium bromide (DeTAB) and DTAB mixtures. The partial molar volumes of monomeric surfactant mixtures and the molar volumes of mixed micelles are observed to depend linearly on the monomer and micelle compositions, respectively. Although the volume of formation of mixed micelles of the DeTAB-DTAB mixture depends on the micellar composition, that of the DTAC-DTAB mixture is observed to be almost independent of the micellar composition. This suggests that the volumes of the counter ions in the micellar solutions are almost equal to those in the monomeric solutions.     

The low concentration aggregation of sodium oleate–sodium linoleate aqueous mixtures

Sodium oleate (NaOL, C₁₈H₃₃O₂Na)–sodium linoleate (NaLin, C₁₈H₃₁O₂Na) mixtures were studied in the micellar and in the air/water interface states at 298.15 K. Three aggregation steps were found: a premicellar aggregation, the critical micelle concentration (CMC), and a structural change of micelles. Micelles, both at the CMC and at the structural change concentration, are richer in oleate than the overall mixture composition. Micelles are strongly non-ideal and the interaction is repulsive. The non-ideal behavior and the dependence of the micelle ionization degree with micelle composition are explained on the basis of the interaction of the π electrons of the surfactants’ chains with water at the hydrocarbon/water micellar interface. The air/solution adsorbed monolayer is also non-ideal, but the interaction is attractive and there is a preferential composition with a mole fraction of sodium oleate of about 0.7. The surface pseudophase behaves as if oleate were the solvent and linoleate a strongly soluble solute. This behavior and the dependence of the average area per adsorbed molecule were explained on the basis of the interaction of the double bonds with water. At the air/solution interface, the linoleate molecule area was similar to that of a heterogemini surfactant having a spacer with seven carbon atoms.     

Mixed Micellization of Dimeric (Gemini) Surfactants and Conventional Surfactants

The aqueous solutions of mixtures of various conventional surfactants and dimeric anionic and cationic surfactants have been investigated by electrical conductivity, spectrofluorometry, and time-resolved fluorescence quenching to determine the critical micelle concentrations and the micelle aggregation numbers in these mixtures. The following systems have been investigated: 12-2-12/DTAB, 12-2-12/C(12)E(6), 12-2-12/C(12)E(8), 12-3-12/C(12)E(8), Dim3/C(12)E(8), and Dim4/C(12)E(8) (12-2-12 and 12-3-12=dimethylene-1,2- and trimethylene-1,3-bis(dodecyldimethylammonium bromide), respectively; C(12)E(6) and C(12)E(8)=hexa- and octaethyleneglycol monododecylethers, respectively; Dim3 and Dim4=anionic dimeric surfactants of the disodium sulfonate type, Scheme 1; DTAB=dodecyltrimethylammonium bromide). For the sake of comparison the conventional surfactant mixtures DTAB/C(12)E(8) and SDS/C(12)E(8) (SDS=sodium dodecylsulfate) have also been investigated (reference systems). Synergism in micelle formation (presence of a minimum in the cmc vs composition plot) has been observed for the Dim4/C(12)E(8) mixture but not for other dimeric surfactant/nonionic surfactant mixtures investigated. The aggregation numbers of the mixed reference systems DTAB/C(12)E(8) and SDS/C(12)E(8) vary monotonously with composition from the value of the aggregation number of the pure C(12)E(8) to that of the pure ionic component. In contrast, the aggregation number of the dimeric surfactant/C(12)E(8) mixtures goes through a minimum at a low value of the dimeric surfactant mole fraction. This minimum does not appear to be correlated to the existence of synergism in micelle formation. The initial decrease of the aggregation number of the nonionic surfactant upon addition of ionic surfactant, up to a mole fraction of ionic surfactant of about 0.2 (in equivalent per total equivalent), depends little on the nature the surfactant, whether conventional or dimeric. The results also show that the microviscosity of the systems containing dimeric surfactants is larger than that of the reference systems. Copyright 2001 Academic Press.     

Binary mixtures with novel monomeric and dimeric surfactants: influence of the head group nature and number of hydrophobic chains on non-ideality

The micellization and micellar growth in the mixtures of N,N-dimethyl, N-phenyl,N-dodecylammonium bromide, PH12, N,N-dimethyl,N-ciclohexylmethyl,N-dodecylammonium bromide, CH12, and their two dimeric counterparts m-dimethylphenyl-α-ω-bis(dodecyldimethylammonium) bromide, 12PH12, and m-dimethylciclohexyl-α-ω-bis(dodecyldimethylammonium) bromide, 12CH12, with dodecyltrimethylammoniumbromide, DTAB, and with N-decanoyl N-methylglucamide, MEGA10, were investigated at 303 K. Circular dichroism, CD, experiments showed the formation of mixed micelles. Two-dimensional, 2D, rotating frame nuclear Overhauser effect spectroscopy (ROESY) experiments indicated that the arrangement of the rings in the pure and mixed micelles is similar, with the rings bent into the micelle interior avoiding contact with water. Application of different theoretical approaches shows that PH12 and CH12 mixtures with DTAB and with MEGA10 behave almost ideally. The binary systems of 12PH12 and 12CH12 with DTAB and with MEGA10 show a non-ideal behavior. An increment in the solution mole fraction of MEGA10 and DTAB diminishes the tendency of the micellar aggregates to grow.     

Electrophoretic properties of dodecyltrimethylammonium bromide micelles in KBr solution

Charge in ionic micelles determines the trends of their stability and their practical applications. Charge can be calculated from zeta potential (zeta) measurements, which, in turn, can be obtained by Doppler microelectrophoresis. In this study, the electrophoretic properties of dodecyltrimethylammonium bromide (DTAB) in KBr aqueous solution (0-6 mM) were determined by Doppler microelectrophoresis. At very low surfactant concentrations (up to 6 mM), zeta potential was quite constant and due to the ionized monomers (DTA+). Above 6 mM, zeta potential increased to a maximum at surfactant concentrations still below the critical micellar concentration (CMC). This increase could be explained by a formation of nonmicellar aggregates of DTAB. Then, above the CMC, zeta potential underwent an abrupt reduction, which was dependent qualitatively and quantitatively on KBr concentration, and which could be due to an increase of the number of counterions adsorbed on the micelle surface. Calculation of effective micellar charge from zeta potential gave the surface charge density. Comparing this value with the theoretical, obtained from geometrical considerations, a fraction of 0.29 of charged micellar headgroups was obtained when DTAB was in aqueous solution, which is consistent with the value obtained by conductivity measurements.     

NMR studies on selectivity of beta-cyclodextrin to fluorinated/hydrogenated surfactant mixtures

The interactions between beta-cyclodextrin (beta-CD) and the equimolar/nonequimolar mixtures of sodium perfluorooctanoate (C(7)F(15)COONa, SPFO) and sodium alkyl sulfate (C(n)H(2n+1)SO(4)Na, C(n)SO(4), n = 8, 10, 12) were investigated by 1H and 19F NMR. It showed that beta-CD preferentially included the fluorinated surfactant when exposed to mixtures of hydrogenated (C(n)SO(4)) and fluorinated (SPFO) surfactants, notwithstanding whether the hydrogenated surfactant C(n)SO(4) was more or less hydrophobic than the SPFO. Such preferential inclusion of the fluorinated surfactant continued to a certain concentration of beta-CD at which time the C(n)SO(4) was then observed to be included. The longer the hydrocarbon chain of C(n)SO(4) the lower the concentration of beta-CD at which the hydrogenated surfactants began to show inclusion. The inclusion process can be qualitatively divided into three stages: first, formation of 1:1 beta-CD/SPFO complexes; second, formation of 1:1 beta-CD/C(n)SO(4) complexes; and finally, formation of 2:1 beta-CD/SPFO complexes upon further increase of beta-CD concentration. In the concentration range studied, during the last stage of inclusion both 2:1 beta-CD/C(12)SO(4) and 2:1 beta-CD/SPFO complexes appear to be simultaneously formed in the system of beta-CD/SPFO/C(12)SO(4) but not in either the systems of beta-CD/SPFO/C(8)SO(4) or beta-CD/SPFO/C(10)SO(4). The selective inclusion of the shorter fluorocarbon chain surfactant might be attributed to the greater rigidity and size of the fluorocarbon chains, compared to those of the hydrocarbon chains, which provide for a tighter fit and better interaction between the host and guest. This latter effect appears to dominate the increase in hydrophobic character as the carbon chain length increases in the hydrogenated series.     

Polymer-Surfactant Interactions and the Effect of Tail Size Variation on Micellization Process of Cationic ATAB Surfactants in Aqueous Medium

The interactions between oppositely charged surfactant-polymer systems have been studied using surface tension and conductivity measurements and the dependence of aggregation phenomenon over the polyelectrolyte concentration and chain length of cationic ATAB surfactants, cetyltrimethyl ammonium bromide (CTAB), tetradecyltrimethyl ammonium bromide (TTAB), and dodecyltrimethyl ammonium bromide (DTAB) have been investigated. It was observed that cationic surfactants induce cooperative binding with anionic polyelectrolyte at critical aggregation concentration (cac). The cac values of ATAB surfactants in the presence of anionic polyelectrolyte, sodium carboxy methyl cellulose (NaCMC), are considerably lower than their critical micelle concentration (cmc). After the complete complexation, free micelles are formed at the apparent critical micelle concentration (acmc), which is slightly higher in polyelectrolyte aqueous solution than in pure water. Among the cationic surfactants (i.e., CTAB, TTAB, and DTAB), DTAB was found to have least interaction with NaCMC. Surfactants with longer tail size strongly favor the interaction, indicating the dependence of aggregation phenomenon on the structure, morphology, and tail length of the surfactant.      

Dodecyltrimethylammonium bromide–disodium dodecanephosphonate mixed micelles

 The aqueous catanionic system dodecyltrimethylammonium bromide (DTAB)–disodiumdodecanephosphonate (DSDP) was studied by potentiometry, conductivity, surface tension, spectrometry and dye solubilization. No precipitation of neutral salts was found in the entire range of compositions studied. Up to four transitions were detected. The first transition, at about 0.001 mol dm⁻³, was probably related to a state change in the adsorption monolayer at the air/water interface. The second, at about 0.0065 mol dm⁻³, was probably related to the formation of ion pairs. The third transition was the critical micelle concentration which was analyzed with the pseudophase separation model and regular solution theory. The interaction between DTAB and DSDP molecules in micelles was weaker than in other cationic–anionic surfactant mixed micelles. Large, probably rodlike, micelles formed at the fourth transition at higher surfactant concentration. No vesicles or lamellar liquid crystals were detected. The adsorbed monolayer at the air/water interface was also studied by means of regular solution theory. It was much richer in DTAB than the micelles and the intermicellar solution. The interaction between DTAB and DSDP molecules at the air/water interface was very low. The results were explained on the basis of steric factors. Received: 6 January 1999 Accepted in revised form: 13 April 1999